1500 L has how many significants figures

Answer:

a. the Kb of NO₂⁻ to find the hydroxide concentration.

Explanation:

When sodium nitrite is dissolved in water, it dissociates in sodium cation and nitrite anion according to the following equation.

NaNO₂(s) ⇒ Na⁺(aq) + NO₂⁻(aq)

Na⁺ comes from NaOH (strong base) so it doesn't react with water.

NO₂⁻ comes from HNO₂ (weak acid) so it reacts with water according to the following equation.

NO₂⁻(aq) + H₂O(l) ⇄ HNO₂(aq) + OH⁻(aq)

This is the basic reaction of nitrite ion, so we need the Kb of NO₂⁻ to  find the hydroxide concentration.

Answer:

A. Increasing the temperature will favor forward reaction and more CaCo3 formed.

B. More CaCo3 will be formed.

C. CaCo3 will decrease and more react ants formed.

D. Less CaCo3 will be formed.

E. Iridium is a catalyst so there is no effect

Explanation:

A. Temperature will increase because it's an endothermic reaction.

B. Adding Cao will favor forward reaction and more CaCo3 formed.

C. Removing methane, more react ants are formed and CaCo3 decreases.

D. Irridi is a catalyst so it has no effect on the CaCo3 but only speeds its rate of reaction.

Answer:

(B). it's metallic bonding

Answer:

The smallest whole-number coefficient for OH⁻ is 2

Explanation:

Step 1: The equation redox reaction is divided into two half equations

Reduction half equation: MnO₄⁻  ----> MnO₂

Oxidation half-equation: I⁻  ---> IO₃⁻

Step 2: Next the atoms are balanced by adding OH⁻ ions and H₂O molecules to the appropriate side of each half equation;

MnO₄⁻ +  2H₂O ----> MnO₂ + 4OH⁻

I⁻ + 6OH⁻ ---> IO₃⁻ + 3H₂O

Step 3 : The charges are then balanced by adding electrons to the appropriate sides of each half equation

MnO₄⁻ +  2H₂O + 3e⁻ ----> MnO₂ + 4OH⁻

I⁻ + 6OH⁻ ---> IO₃⁻ + 3H₂O + 6e⁻

Step 4: Oxidation half equation is multiplied by 2 while reduction half equation is multiplied by 1 to balance the number of electrons gained and lost for the reaction

2MnO₄⁻ +  4H₂O + 6e⁻ ----> 2MnO₂ + 8OH⁻

I⁻ + 6OH⁻ ---> IO₃⁻ + 3H₂O + 6e⁻

Step 5 : addition of the two half equations to yield a net ionic equation

2MnO₄⁻  + I⁻ + H₂O ----> 2MnO₂ + IO₃⁻ + 2OH⁻

The smallest whole number coefficient for OH⁻ is 2

A redox reaction is divided into two half equations which are shown below:

Reduction half equation: MnO₄⁻  ----> MnO₂

Oxidation half-equation: I⁻  ---> IO₃⁻

Atoms are balanced by adding OH⁻ ions and H₂O molecules to the appropriate side of each half equation to make the equation complete ;

MnO₄⁻ +  2H₂O ----> MnO₂ + 4OH⁻

I⁻ + 6OH⁻ ---> IO₃⁻ + 3H₂O

The charges needs to be balanced and this is done by adding electrons to the appropriate sides of each half equation

MnO₄⁻ +  2H₂O + 3e⁻ ----> MnO₂ + 4OH⁻

I⁻ + 6OH⁻ ---> IO₃⁻ + 3H₂O + 6e⁻

The equation needs to be balanced by multiplying the oxidation half equation by 2 while reduction half equation is multiplied by 1 to balance the number of electrons on both sides of the equations.

2MnO₄⁻ +  4H₂O + 6e⁻ ----> 2MnO₂ + 8OH⁻

I⁻ + 6OH⁻ ---> IO₃⁻ + 3H₂O + 6e⁻

The two half equations are then added and written together to form a net ionic equation

2MnO₄⁻  + I⁻ + H₂O ----> 2MnO₂ + IO₃⁻ + 2OH⁻

The smallest whole-number coefficient for OH⁻ is therefore 2.

Read more on https://brainly.com/question/17156617

Answer:

A. Ka = [CO2] / [C] [O2]^1/2

B. Kb = [CO2] / [CO] [O2]^1/2

Explanation:

Equilibrium constant is simply defined as the ratio of the concentration of the products raised to their coefficient to the concentration of the reactants raised to their coefficient.

Now, we shall obtain the expression for the equilibrium constant for the reaction as follow:

A. Determination of the expression for equilibrium constant Ka.

This is illustrated below:

C(s) + 1/2 O2(g) <==> CO(g)

Ka = [CO2] / [C] [O2]^1/2

B. Determination of the expression for equilibrium constant Kb.

This is illustrated below:

CO(g) + 1/2 O2(g) <==> CO2(g)

Kb = [CO2] / [CO] [O2]^1/2

Answer:

848 torr  

Explanation:

The only variables are the pressure and the volume, so we can use Boyle's Law.

p₁V₁ = p₂V₂

Data:

p₁ = 565 torr; V₁ = 24.0 L

p₂ = ?;            V₂ =  16.0 L

Calculations:

[tex]\begin{array}{rcl}p_{1}V_{1} & = & p_{2}V_{2}\\\text{565 torr} \times \text{24.0 L} & = & p_{2} \times \text{16.0 L}\\\text{13 560 torr} & = & 16.0p_{2}\\p_{2} & = & \dfrac{\text{13 560 torr}}{16.0}\\\\& = &\textbf{848 torr}\\\end{array}\\\text{The final pressure of the gas is $\large \boxed{\textbf{848 torr}}$}[/tex]

Answer:

Amount of salt in 1 L seawater = 34 g

Explanation:

According to Archimedes' principle, mass of freshwater and cup = mass of equal volume of seawater

mass of freshwater = density * volume

1 cm³ = 1 mL

mass of freshwater = 0.999 g/cm³ * 735 cm³ = 734.265 g

mass of freshwater + cup = 734.265 + 25 = 759.265 g

Therefore,  mass of equal volume of seawater = 759.265 g

Volume of seawater displaced = 735 mL = 0.735 L (assuming the cup volume is negligible)

1 liter = 1000 cm³ = 1000 mL;

Density of seawater = mass / volume

Density of seawater = 759.265 g / 0.735 L = 1033.01 g/L

Density of freshwater in g/L = 0.999 g/ (1/1000) L = 999 g/L

mass of 1 Liter seawater = 1033.01 g

mass of 1 Liter freshwater = 999 g

mass of salt dissolved in 1 L of seawater = 1033.01 g - 999 g = 34.01 g

Therefore, amount of salt in 1 L seawater = 34 g

Answer:

3.11

Explanation:

Any buffer system can be described with the reaction:

[tex]HA~->~H^+~+~A^-[/tex]

Where is the acid and is the base. Additionally, the calculation of the pH of any buffer system can be made with the Henderson-Hasselbach equation:

[tex]pH~=~pKa~+~Log(\frac{ [A^-]}{[HA]})[/tex]

With all this in mind, we can write the reaction for our buffer system:

-) Nitrous acid: [tex]HNO_2[/tex]

-) Sodium nitrate: [tex]NaNO_2[/tex]

[tex]HNO_2~->~H^+~+~NO_2^-[/tex]

In this case, the acid is [tex]HNO_2[/tex] with a concentration of 0.150 M and a volume of 45.0 mL (0.045 L). The base is [tex]NO_2^-[/tex] with a concentration of 0.175 M and a volume of 20.0 mL (0.020 L).

We can calculate the moles of each compound is we take into account the molarity equation ([tex]M=\frac{mol}{L}[/tex]). So:

-) moles of [tex]HNO_2[/tex]:

[tex]mol=0.150~M*0.045~L=0.00657[/tex]

-) moles of [tex]NO_2^-[/tex]:

[tex]mol=0.175~M*0.020~L=0.0035[/tex]

The total volume would be:

0.020 L + 0.045 L = 0.065 L

With this in mind, we can calculate the molarity of each compound:

-) Concentration of [tex]HNO_2[/tex]

[tex]M=\frac{0.00657~mol}{0.065~L}=0.101~M[/tex]

-) Concentration of [tex]NO_2^-[/tex]

[tex]M=\frac{0.0035~mol}{0.065~L}=0.0538~M[/tex]

The pKa reported is 3.39, therefore we can plug the values into the Henderson-Hasselbach equation:

[tex]pH~=~3.39~+~Log(\frac{[0.0538~M]}{[0.101~M]})~=~3.11[/tex]

The final pH value would be 3.11

I hope it helps!

The pH of a buffer made by combining 45.0 mL of 0.150M nitrous acid and 20.0mL of 0.175M sodium nitrate is 2.87.

We have a buffer made by combining 45.0mL of 0.150 M nitrous acid and 20.0mL of 0.175M sodium nitrate.

Nitrous acid is a weak acid and nitrate ion is its conjugate base.

It is a solution used to resist abrupt changes in pH when acids or bases are added.

We do so by multiplying the molar concentration by the volume in liters.

HNO₂: 0.150 mol/L × 0.0450 L = 6.75 × 10⁻³ mol

NaNO₂: 0.175 mol/L × 0.0200 L = 3.50 × 10⁻³ mol

The total volume will be the sum of the volumes of each solution.

V = 45.0 mL + 20.0 mL = 65.0 mL = 0.0650 L

HNO₂: 6.75 × 10⁻³ mol/0.0650 L = 0.104 M

NaNO₂: 3.50 × 10⁻³ mol/0.0650 L = 0.0538 M

We can calculate the pH of a buffer system using Henderson-Hasselbach's equation.

pH = pKa + log [NaNO₂]/[HNO₂]

pH = 3.16 + log 0.0538/0.104 = 2.87

The pH of a buffer made by combining 45.0 mL of 0.150M nitrous acid and 20.0mL of 0.175M sodium nitrate is 2.87.

Learn more about buffers here: https://brainly.com/question/24188850

Answer:

D) 65.7%

Explanation:

Based on the reaction:

2H2(g)+O2(g)⟶2H2O(l)

2 moles of hydrogen produce 2 moles of water assuming an excess of oxygen.

To find percent yield of the reaction we need to find theoretical yield (The yield assuming all hydrogen reacts producing water). With theoretical yield and actual yield (32.8g H₂O) we can determine percent yield as 100 times the ratio between actual yield and theoretical yield.

Theoretical yield:

Moles of 5.58g H₂:

5.58g H₂ ₓ (1 mol / 2.016g) = 2.768 moles H₂

As 2 moles of H₂ produce 2 moles of H₂O, if all hydrogen reacts will produce 2.768 moles H₂O. In grams:

2.768 moles H₂O ₓ (18.015g / mol) =

49.86g H₂O is theoretical yield

Percent yield:

Percent yield = Actual yield / Theoretical yield ₓ 100

32.8g H₂O / 49.86g ₓ 100 =

65.7% is percent yield of the reaction

Answer:

B) hydroxide concentration

Explanation:

Hello,

In this case, since we are talking about strong both base and acid, since the base is the titrant and the acid the analyte, once the equivalence point has been reached, some additional base could be added before the experimenter realizes about it, therefore, since the titrant is a strong base, it completely dissociates in hydroxide ions and metallic ions which allows us to compute the pOH of the solution by known the hydroxide ions concentration.

After that, due to the fact that the pH is related with the pOH as shown below:

pH=14-pOH

We can directly compute the pH.

Best regards.

Answer:

B

Explanation:

because it is a trigonal planar compound

Three bonding pairs around a central atom results in a trigonal planar compound. Option B is correct.

In a trigonal planar arrangement, the central atom is surrounded by three bonding pairs of electrons, forming a flat, triangular shape. The bond angles between the bonding pairs are approximately 120 degrees.

This molecular geometry is observed when a molecule has a central atom with three bonded pairs and no lone pairs. Examples of compounds with  trigonal planar geometry include boron trifluoride (BF₃) as well as formaldehyde (H₂CO).

The other options are not correct for a molecule with three bonding pairs;

Octahedral refers to a molecular geometry with six bonding pairs around a central atom.

Tetrahedral corresponds to a molecular geometry with four bonding pairs around a central atom.

Linear represents a molecular geometry with two bonding pairs around a central atom.

Hence, B. is the correct option.

To know more about bonding pairs here

https://brainly.com/question/32421783

#SPJ2

Answer:

Explanation:

Answer:

1, 1, 1, 1  

Explanation:

potassium hydrogen sulfate + potassium hydroxide ⟶ potassium sulfate + water(l)

                 KHSO₄                   +               KOH              ⟶            K₂SO₄   + H₂O

1. Put a 1 in front of the most complicated-looking formula (K₂SO₄?):

KHSO₄  + KOH ⟶ 1K₂SO₄ + H₂O

2. Balance S:

We have fixed 1 S on the right. We need 1 S on the left. Put a 1 in front of KHSO₄ to fix it.

1KHSO₄  + KOH ⟶ 1K₂SO₄ + H₂O

3. Balance K:

We have fixed 2 K on the right and 1 K on the left. We need 1 more K on the left. Put a 1 in front of KOH.

1KHSO₄  + 1KOH ⟶ 1K₂SO₄ + H₂O

4. Balance O

We have fixed 4 O on the right and 5 O on the left. We need 1 more O on the right. Put a 1 in front of H₂O.

1KHSO₄  + 1KOH ⟶ 1K₂SO₄ + 1H₂O

Every formula has a coefficient. The equation should be balanced.

5. Check that atoms balance:

[tex]\begin{array}{ccc}\textbf{Atom} & \textbf{On the left} & \textbf{On the right}\\\text{K} & 2 &2\\\text{H} & 2 & 2\\\text{S} & 1 & 1\\\text{O}&5&5\\\end{array}[/tex]

It checks.

The coefficients are 1, 1, 1, 1.

Answer:

the answer is 2,000 nickels.

Explanation:

we multiplied 100 by 100, because there are 100 cents in a dollar, and we divided 10,000 by 5, because there are 5 cents in a nickel.

Answer:

The rms speed of its molecules becomes. (T) has become four times. Therefore, v_(rms) will become two times,...

Answer:

A. NaHCO₃

Explanation:

NaHCO₃ ⇒ NaOH + H₂CO₃

NaOH is a strong base and H₂CO₃ is a weak acid. Therefore, NaHCO₃ is a salt of a strong base-weak acid reaction. The salt is basic because carbonic acid (H₂CO₃) is a weak acid so it remains undissociated. So, there is a presence of additional OH⁻ ions that makes the solution basic.

Hope that helps.

Answer:

The balanced chemical reaction is given as:

[tex]Cs_2SO_4(aq)+Ba(ClO_4)_2(aq)\rightarrow BaSO_4(s)+2CsClO_4(aq)[/tex]

Explanation:

When aqueous cesium sulfate and aqueous barium perchlorate are mixed together it gives white precipitate barium sulfate and aqueous solution od cesium perchlorate.

The balanced chemical reaction is given as:

[tex]Cs_2SO_4(aq)+Ba(ClO_4)_2(aq)\rightarrow BaSO_4(s)+2CsClO_4(aq)[/tex]

According to reaction, 1 mole of cesium sulfate reacts with 1 mole of barium perchlorate to give 1 mole of a white precipitate of barium sulfate and 2 moles of cesium perchlorate.

Answer:

the answer is 5.83x1020 molecules

Explanation:

I'd really appreciate a brainleast

Answer: Reaction (1) , (3) and (4) are accompanied by an increase in entropy.

Explanation:

Entropy is the measure of randomness or disorder of a system. If a system moves from  an ordered arrangement to a disordered arrangement, the entropy is said to decrease and vice versa.

(1) [tex]2SO_2(g)+O_2(g)\rightarrow SO_3(g)[/tex]

3 moles of reactant are changing to 1 mole of product , thus the randomness is increasing. Thus the entropy also increases.

2) [tex]H_2O(l)\rightarrow H_2O(s)[/tex]

1 mole of Liquid reactant is changing to 1 mole of solid product , thus the randomness is decreasing. Thus the entropy also decreases.

3) [tex]Br_2(l)\rightarrow Br_2(g)[/tex]

1 mole of Liquid reactant is changing to 1 mole of gaseous product , thus the randomness is increasing. Thus the entropy also increases.

4)  [tex]H_2O_2(l)\rightarrow H_2O(l)+\frac{1}{2}O_2(g)[/tex]

1 mole of Liquid reactant is changing to half mole of gaseous product and 1 mole of liquid product, thus the randomness is increasing. Thus the entropy also increases.

Answer:

1)In organic chemistry, the bromine test is a qualitative test for the presence of unsaturation (carbon-to-carbon double or triple bonds), phenols and anilines. ... The more unsaturated an unknown is, the more bromine it reacts with, and the less coloured the solution will appear.

2)The equation for incomplete combustion of propane is: 2 C3H8 + 9 O2 → 4 CO2 + 2 CO + 8 H2O + Heat. If not enough oxygen is present for complete combustion, incomplete combustion occurs. The result of incomplete combustion is, once again, water vapour, carbon dioxide and heat. But it also produces carbon monoxide.

Explanation:

3)Propene, also known as propylene, is an unsaturated organic compound with the chemical formula {\displaystyle {\ce {CH3CH=CH2}}}. It has one double bond, and is the second simplest member of the alkene class of hydrocarbons. It is a colorless gas with a faint petroleum-like odor. 

Formula: C3H6

IUPAC ID: Propene

4)Margarines are chemically created during hydrogenation which, until January 1, 2006, relied upon trans fats to solidify their vegetable oils. Food companies have been exploring options for replacing trans fat in partially hydrogenated margarine.

a) A polyfunctional acid is an acid that has more than one functional group.

b) The equations of dissociation of phosphoric acid are:    

c) The equation for calculating the concentration of H₃O⁺ is [tex] [H_{3}O^{+}] = (\frac{K_{1}K_{2}K_{3}[H_{3}PO_{4}]}{[PO_{4}^{-3}]})^{1/3} [/tex]

a) A polyfunctional acid can be defined as an acid that has more than one functional group. Phosphoric acid (H₃PO₄) is an example of polyfunctional acid since it is composed of three hydroxyl groups joined to a phosphorus atom, which is also joined to an oxygen atom by a double bound. In that structure, the three hydrogen atoms of the hydroxyl groups give the acidic behavior to this compound.                  

b) Phosphoric acid has three equations of dissociation:  

The dissociation constants for the three above equations are:

[tex] K_{1} = \frac{[H_{2}PO_{4}^{-}][H_{3}O^{+}]}{[H_{3}PO_{4}]} [/tex]   (4)

[tex] K_{2} = \frac{[HPO_{4}^{2-}][H_{3}O^{+}]}{[H_{2}PO_{4}^{-}]} [/tex]    (5)

[tex] K_{3} = \frac{[PO_{4}^{3-}][H_{3}O^{+}]}{[HPO_{4}^{2-}]} [/tex]    (6)

c) We can calculate the concentration of H₃O⁺ for each equilibrium with the equations (4), (5), and (6).    

The general reaction of dissociation of phosphoric acid is given by the sum of equations (1), (2), and (3):

H₃PO₄ + 3H₂O ⇄ PO₄³⁻ + 3H₃O⁺   (7)  

The concentration of H₃O⁺ for the total dissociation reaction (eq 7) can be found as follows:  

[tex] K_{t} = \frac{[PO_{4}^{-3}][H_{3}O^{+}]^{3}}{[H_{3}PO_{4}]} [/tex]   (8)

Where:

[tex] K_{t} = K_{1}*K_{2}*K_{3} [/tex]

Hence, by knowing the dissociation constants K₁, K₂ and K₃, and the concentrations of PO₄³⁻ and H₃PO₄, the [H₃O⁺] is:

[tex][H_{3}O^{+}] = (\frac{K_{1}K_{2}K_{3}[H_{3}PO_{4}]}{[PO_{4}^{-3}]})^{1/3}[/tex]

You can find more about acid dissociation constant in the link: https://brainly.com/question/1372520?referrer=searchResults                                                                  

I hope it helps you!                        

Answer:

The correct option is C.

Note the full question and structure of the moleculesis found in the attachment below.

Explanation:

Triglycerides or triacylglycerols are non-polar, hydrophobic lipid molecules composed of three fatty acids linked by ester bonds to a molecule of glycerol.

The fatty acids linked to the glycerol molecule are denoted by R and may be of the same kind or different. when the R group is the same, the R is attached in all the three positions for ester bonding in the glycerol molecule but when they are different are denoted by R, R' and R'' respectively.

During the hydrolysis of triglycerides, the three fatty acids molecules are obtained as well as a glycerol molecule.

From the question, when 1 mole of the triglyceride is hydrolysed, 2 moles of RCOOH, 1 mole of R'COOH and 1 mole of glycerol is obtained. The triglyceride must then be composed of two fatty acids which are the same denoted by R, and a different fatty acid molecule denoted by R'.

The correct option therefore, is C

Answer:

PBr3 is NOT hypervalent

Explanation:

The molecule that is not hypervalent is PBr3

A molecule can be defined as the smallest part of a substance that can exist independently.

It is formed by the chemical combination of two or more atoms.

A molecule is said to be hypervalent when more than four pairs of electrons are around the central atom.

A molecule is said to be hypovalent when less than four pairs of electrons are around the central atom.

From the question, the molecule that is hypovalent is PBr3

This is because, phosphorus can make hypervalent compounds, but in this specific example it is sharing three bonds and has one lone pair, so it has simply a full octet.

Therefore, the molecule that is not hypervalent is PBr3.

Learn more here:

https://brainly.com/question/12956617

Answer:

14.297 g

Explanation:

From the question;

1 mo of the compound requires 1320.0 kJ

From the molar mass;

1 ml of the compound weighs 30.55g

How many grams requires 617.30kJ?

1 ml = 1320

x mol = 617.30

x = 617.30 / 1320

x = 0.468 mol

But 1 mol = 30.55

0.468 mol = x

x = 14.297 g

Answer: The question is not clear

Explanation:

Answer:

They get more energy, so they vibrate!

Explanation:

Answer:

D. 2:5

Explanation:

It has 5 valency electrons

[tex].[/tex]

In the given question, the electronic configuration of nitrogen is 2,5. The correct answer is option D.

The electronic configuration of an atom describes the arrangement of its electrons in different energy levels or orbitals.

Nitrogen has an atomic number of 7, which means it has 7 electrons.

Therefore, the electronic configuration of nitrogen is 2,5, which means it has 2 electrons in its first energy level and 5 electrons in its second energy level. Option D is the correct answer.

Learn more about Electron Configuration here: https://brainly.com/question/14283892

#SPJ4

Answer:

245.66g of NH₄Cl is the mass we need to add to obtain the desire pH

Explanation:

The mixture of NH3/NH4Cl produce a buffer. We can find the pH of a buffer using H-H equation:

pH = pKa + log [A⁻] / [HA]

Where [A⁻] is the molar concentration of the base, NH₃, and [HA] molar concentration of the acid, NH₄⁺. This molar concentration can be taken as the moles of each chemical

First, we need to find pKa of NH₃ using Kb. Then, the moles of NH₃ and finally replace these values in H-H equation to solve moles of NH₄Cl we need to obtain the desire pH.

pKb = - log Kb

pKb = -log 1.8x10⁻⁵ = 4.74

pKa = 14 - pKb

pKa = 14 - 4.74

pKa = 9.26

2.00L ₓ (0.200mol NH₃ / L) = 0.400 moles NH₃

pH = pKa + log [NH₃] / [NH₄Cl]

8.20 = 9.26 + log [0.400 moles] / [NH₄Cl]

-1.06 =  log [0.400 moles] / [NH₄Cl]

0.0087 =  [0.400 moles] / [NH₄Cl]

[NH₄Cl] = 0.400 moles / 0.0087

[NH₄Cl] = 4.59 moles of NH₄Cl we need to add to original solution to obtain a pH of 8.20. In grams (Using molar mass NH₄Cl=53.491g/mol):

4.59 moles NH₄Cl ₓ (53.491g / mol) =

A 1.0-L buffer solution contains 0.100 mol  HC2H3O2 and 0.100 mol  NaC2H3O2. The value of Ka for HC2H3O2 is 1.8×10−5.

Calculate the pH of the solution, upon addition of 0.035 mol of NaOH to the original buffer.

Answer:

The pH of this solution = 5.06  

Explanation:

Given that:

number of moles of CH3COOH = 0.100 mol

volume of the buffer solution = 1.0 L

number of moles of NaC2H3O2 = 0.100 mol

The objective is to Calculate the pH of the solution, upon addition of 0.035 mol of NaOH to the original buffer.

we know that concentration in mole = Molarity/volume

Then concentration of [CH3COOH] = [tex]\mathtt{ \dfrac{0.100 \ mol}{ 1.0 \ L }}[/tex]  = 0.10 M

The chemical equation for this reaction is :

[tex]\mathtt{CH_3COOH + OH^- \to CH_3COO^- + H_2O}[/tex]

The conjugate base is CH3COO⁻

The concentration of the conjugate base [CH3COO⁻] is  = [tex]\mathtt{ \dfrac{0.100 \ mol}{ 1.0 \ L }}[/tex]  

= 0.10 M

where the pka (acid dissociation constant)for CH3COOH = 4.74

If 0.035 mol of NaOH is added  to the original buffer, the concentration of NaOH added will be = [tex]\mathtt{ \dfrac{0.035 \ mol}{ 1.0 \ L }}[/tex] = 0.035 M

The ICE Table for the above reaction can be constructed as follows:

                  [tex]\mathtt{CH_3COOH \ \ \ + \ \ \ \ OH^- \ \ \to \ \ CH_3COO^- \ \ \ + \ \ \ H_2O}[/tex]

Initial             0.10               0.035         0.10                  -

Change        -0.035          -0.035       + 0.035              -

Equilibrium    0.065              0              0.135               -

By using  Henderson-Hasselbalch equation:

The pH of this solution = pKa + log [tex]\mathtt{\dfrac{CH_3COO^-}{CH_3COOH}}[/tex]

The pH of this solution = 4.74 + log [tex]\mathtt{\dfrac{0.135}{0.065}}[/tex]

The pH of this solution = 4.74 + log (2.076923077 )

The pH of this solution = 4.74 + 0.3174

The pH of this solution = 5.0574

The pH of this solution = 5.06    to two decimal places

Answer:

The atomic is 6, the mass number is 12

Explanation:

The element being described is Carbon.

The number of protons in the nucleus of an atom is called its atomic number, Z.

The number of protons pluss the number of neutronsin the nucleus of an atom gives the atom's mass number, A.

Answer:

There are no forces holding the gas particles together.

Explanation: