The number of moles of calcium chloride ( CaCl₂) are contained in the given sample is 0.045 moles.
Given that :
The mass of the calcium chloride, CaCl₂ = 5 g
The molar mass of the calcium chloride, CaCl₂ = 110.98 g /mol
The number of moles can be calculated by the formula given below :
The number of moles = mass / molar mass
where,
Mass = 5 g
Molar mass = 119.98 g/mol
The number of moles = 5 g / 110.98 g /mol
The number of moles = 0.045 moles.
The moles of the calcium chloride , CaCl₂ is 0.045 mol.
To learn more about moles here
https://brainly.com/question/21683404
#SPJ4
how many carbons from one glucose molecule enter one round of the krebs cycle
In the krebs cycle, the number of carbons from the one glucose molecule enters one round is the four carbons.
The kreb's cycle is also called tricarboxylic acid or the citric acid cycle. The glucose molecule contains six carbon atoms. During the process of glycolysis, the glucose molecule split into two molecules of the three carbons compound called pyruvate. The pyruvate is then converted into the acetyl CoA and the two carbon compounds. A molecule of carbon dioxide is released during the process.
Thus, the four carbon atoms (the 2 in each of the acetyl CoA ) from the glucose enter into the kreb's cycle.
To learn more about kreb's cycle here
https://brainly.com/question/27960701
#SPJ4
except when actively removing content from it, a chemical container must
Except when actively removing content from it, a chemical container must be properly labeled and sealed to prevent leaks or spills.
Chemical containers must be properly labeled with the chemical name, hazard warnings, and any other necessary information, such as the manufacturer's name and the date of manufacture. They should also be properly sealed to prevent leaks or spills and to keep the contents from evaporating. It is also important to store chemical containers in a safe and appropriate location, away from heat sources, potential sources of ignition and out of the reach of children and unauthorized personnel. It is important to follow the guidelines and regulations set by the appropriate authorities such as OSHA, to ensure the safe handling and storage of chemicals.
Learn more about chemical container here:
https://brainly.com/question/30229420
#SPJ4
Use the electron-transfer method to balance the equation involving the reaction of lithium with water to produce lithium hydroxide and hydrogen gas.
Answer:
Explanation:
The equation for the reaction of lithium with water to produce lithium hydroxide and hydrogen gas is:
Li + H2O -> LiOH + H2
To balance this equation using the electron-transfer method, we first need to determine the oxidation states of each element in the reactants and products.
In Li, the oxidation state of lithium is +1. In H2O, the oxidation state of hydrogen is +1 and oxygen is -2.
In LiOH, the oxidation state of lithium is +1, oxygen is -2 and hydrogen is +1.
In H2, the oxidation state of hydrogen is +1.
It's clear that lithium loses 1 electron to become Li+ and hydrogen gains 1 electron to become H-.
So, we have to add an electron on the right side of the equation to balance the electrons.
Li + H2O -> LiOH + H2 + e-
Now, the number of electrons on both sides of the equation is the same and the equation is balanced.
Alternatively, we can use the oxidation number method, where we balance the charge of the reactant and product side of the equation. The sum of the oxidation numbers of all atoms on the reactant side must equal the sum of the oxidation numbers of all atoms on the products side. In this case, the oxidation state of lithium is +1, hydrogen is +1 and oxygen is -2.
Li + H2O -> LiOH + H2
+1 +1 -2 = +1 +1 +1 -2
The equation is already balanced with respect to oxidation numbers
Lead exposure con cause all of the following except:
A. Skin burns
B. Kidney damage
C. Brain damage
D. Sterility
find the number of automobiles whose total mass is the same as 1.0 mol of blueberries.
The number of automobiles whose total mass is same as 1.0 mole of blueberries is 2.25825 X [tex]10^{17}[/tex].
We need to calculate the grams a mole of blueberries weighs. One mole of anything is 6.022 X 10^23. so we can multiply this number by the mass of an average blueberry.
=0.75 g X 6.02214×10^23
= 4.516605 X 10^23 g of blueberries per mole
Now we have to convert the mass of an automobile 2.0 X 10^3 kg into grams.
= 2.0 X 10^3 kg X 1000
= 2.0 X 10^6 g per automobile
Now compare the mass of one mole of blueberries to the mass of an automobile. This can be done by dividing the mass of blueberries by the mass of an automobile.
= (4.5165 X 10^23g) / (2.0 X 10^6 g per automobile)
= 225,830,250,000,000,030 automobiles
= 2.25825 X 10^17 automobiles
To learn more about Problem based on automobiles related to mass please visit:
https://brainly.com/question/30183738
#SPJ4
why are green plants important to both humans and animals?
Answer:
green plants can perform photosynthesis which allows them to make their own food, and provide carbon dixiode.
How many hydrogen atoms are in 1.00 mole of methane CH4?
The number of the hydrogen atoms in the 1 mole of the methane CH₄ is 24.088 × 10²³ atoms.
Given that :
The number of the moles = mass / molar mass
The number of the moles of the CH₄ , methane = 1 mol
The molecule of the CH₄ contains the 4 hydrogen atoms. The number of the molecules in the 1 mole of the atom is 6.022 × 10²³ molecules.
The number of the hydrogen atoms in the CH₄ , methane = 4 hydrogen atoms.
Therefore, the number of the hydrogen atom = 4 × 6.022 × 10²³
The number of the hydrogen atoms in 1 mole of the CH₄ = 24.088 × 10²³ atoms.
To learn more about atoms here
https://brainly.com/question/2925176
#SPJ4
Titration Curve for Alanine Definition
To determine the concentration of an unknown solution, the technique that can be used is titration, where the solution of a known concentration is used. The titrant is added to the burette with a known volume of unknown solution till the reaction is finished.
The titration curve for the alanine definition is the the technique use to determine the concentration of the unknown solution is called as the titration.
Titration is used in the laboratory method. The titration is used to determine the concentration of the unknown solution and it is the qualitative analysis. The titration technique is very useful in the analytical chemistry. The solution of the known concentration is called as the titrant. The titrant is added into the burette till the reaction is completed.
The titration are of four types :
Acid - base titrationRedox titrationsPrecipitation titrationComplexometric titrationThe solution of the unknown concentration is called as the analyte.
To learn more about titration here
https://brainly.com/question/30226139
#SPJ4
What is the product of H2 O2 reaction?
The product of H2 + O2 reaction is water or hydrogen peroxide.
What do you get when H2 + O2 is combined?When molecular hydrogen (H2) and oxygen (O2) are combined and allowed to react together, energy is released and molecules of hydrogen and oxygen can combine to form either water or hydrogen peroxide.
2 H 2 ( g ) Hydrogen + O 2 ( g ) Oxygen → 2 H 2 O ( g ) Water.
To produce two molecules of water (H2O), two molecules of diatomic hydrogen (H2) must combine with one molecule of diatomic oxygen (O2). Energy is also released in the process.
To know more about reaction, refer
https://brainly.com/question/11231920
#SPJ4
Complete the nuclear equations name the radiation
27Co^60 -> 0 e ^-1
To solve this we must be knowing each and every concept related to radioactive decay. Therefore, the balanced equation for the given chemical reaction can be given as
⁶⁰Co₂₇ [tex]\rightarrow[/tex] ⁶°Ni₂₈ + ₀e⁻¹
What is radioactive decay?The spontaneous disintegration about a nucleus of an atom of such a radioactive substance that results inside the radiation emission first from nucleus is referred to as radioactive decay.
A parent nuclide is the nuclide which decays inside a radioactive process, while a daughter nuclide is the nuclide that is formed in the radioactive process.
The balanced equation for the given chemical reaction can be given as
⁶⁰Co₂₇ [tex]\rightarrow[/tex] ⁶°Ni₂₈ + ₀e⁻¹
Therefore, the balanced equation for the given chemical reaction can be given as
⁶⁰Co₂₇ [tex]\rightarrow[/tex] ⁶°Ni₂₈ + ₀e⁻¹
To know more about radioactive decay, here:
https://brainly.com/question/1770619
#SPJ1
How many carbon atoms are present in the compounds CaCO3?
There is only one carbon atom present in the compound CaCO3 other are of Calcium and Oxygen.
What is Calcium?The chemical element calcium has the atomic number 20 and the letter Ca is used as the symbol of Calcium. Calcium is an alkaline earth metal which reacts with air to create a black oxide-nitride coating. The heavier homologues barium and strontium are most similar to it in terms of physical and chemical characteristics.
Calcium has the following Specifications:
Symbol of Calcium: CaAtomic number: 20Atomic mass: 40.078 uElectron configuration: [Ar] 4s²Electronegativity: 1Discoverer: Humphry DavyTo know more about Calcium do visit
https://brainly.com/question/4023397
#SPJ4
She noticed that bubbles started to form and rise upwards only after she unscrewed the cap. She then opened another bottle that was much colder and she noticed that a lot more bubbles had formed. Explain what Ava observed
She noticed that bubbles started to form and rise upwards only after she unscrewed the cap. As the pressure increases the solubility of the gas increases.
The bubbles started to form and rise the upwards only after the she unscrewed cap. She then opened the another bottle that was colder and then she noticed that lot more of the bubbles had formed. The pressure on the solution increases the solubility of the gas also increases.
The drinks is under the high pressure , so the carbonate gas is evolved in the liquid. After the cap unscrewed the pressure will decrease and the gas bubbles comes out. When the temperature increases the gas becomes less soluble. This is reason cold carbonate is much more bubbly than the warm one.
To learn more about solubility here
https://brainly.com/question/28709911
#SPJ4
how would the products differ if styrene were reacted with m-cpba in methylene chloride versus water?
If styrene were reacted with m-chloroperoxybenzoic acid (m-CPBA) in methylene chloride, the reaction would likely proceed as an electrophilic addition, forming a styrene oxide intermediate. This intermediate can then undergo further reactions, such as acid-catalyzed ring-opening, to form various products.
If the reaction were done in water, the reaction conditions would be different, as water is a polar solvent and could potentially participate in the reaction. Additionally, the reaction would be likely to proceed via a different mechanism, such as a nucleophilic addition, resulting in different products.
It is also important to note that m-CPBA is a strong oxidizing agent, and the reaction with styrene in water might face solubility and stability issues.
Learn more about styrene:
https://brainly.com/question/27669893
#SPJ4
Are neutral compounds conductive?
No current flows because the solution's neutral molecules are unable to carry electrical charges.
Can substances that are neutral conduct electricity? No current flows because the solution's neutral molecules are unable to carry electrical charges.A nonelectrolyte is a material that transmits water's aqueous solution no better than water does on its own.So, whereas pure neutral molecule solutions don't conduct electricity, ion-containing solutions do.Because their ions are free to travel from one location to another, ionic substances conduct electricity when they are liquid or dissolved in water.Because their ions are immobile and maintained in fixed places, ionic substances cannot conduct electricity when solid.Due to the free movement of the ions, ionic compound solutions and molten forms can conduct electricity.When an ionic chemical dissolves in solution, the ions in the molecule dissociate.To learn more about neutral conduct refer
https://brainly.com/question/9278450
#SPJ1
How do you find the number of atoms in a plane?
There are 4 atoms at each of the four corners and 1 atom in the center of the (100) plane. The number of atoms on the (100) plane contained within the unit cell is N100 = 4 (1/4) + 1 = 2
There are 4 atoms at the corners of the rectangle, and each one of them contributes 4x(1/4), or one atom. There are two atoms on the longer side (the cubic unit cell's face diagonal) that each contribute 2x(1/2), or 1. Additionally, the two diagonals of the rectangle are the body diagonals of the original cube, meaning that they each contribute one atom, or two atoms. Therefore, the total number of atoms in the rectangle is 1 (corners) + 1 (face diagonals) + 2 (body diagonals), which equals 4.
Thus, the number of atoms per unit area on the (110) plane of this structure is 4/2-a2.
Learn more about atoms from here:
https://brainly.com/question/13654549
#SPJ4
Which of the following would result in a plant producing More food for itself
The event that would result in a plant being able to produce more food for itself is C. The presence of more light.
What affects photosynthesis ?Even with lots of water, carbon dioxide, and the right temperature, a plant cannot photosynthesize very quickly in the absence of sufficient light. The rate of photosynthesis rises as light intensity rises.
In photosynthesis, carbon dioxide and water are one of the reactants. The rate of photosynthesis will therefore increase as carbon dioxide concentration rises.
Enzymes regulate the chemical events that mix water and carbon dioxide to create glucose. Temperature has an impact on the rate of photosynthesis just like it does with any other enzyme-controlled reaction.
Find out more on plant producing food at https://brainly.com/question/1972500
#SPJ1
Options for this question include:
Lower light intensity Lack of carbon dioxide The presence of more lightWhat is the industrial process used to manufacture sulfuric acid?
The industrial process of the used in the manufacturing of the sulfuric acid is the contact process.
The contact process is the industrial process used to manufacture the sulfuric acid. The contact process is the current process used to produce the sulfuric acid. The steps used in the process of the contact process is given below :
1) The extraction of the sulphur
2) The preparation of the sulfur dioxide
3) The conversion of the sulfur dioxide to the sulfur trioxide
4) The conversion of the sulfur trioxide to the sulfuric acid.
Thus the process used in the industrial production of the sulfuric acid is contact process.
To learn more about sulfuric acid here
https://brainly.com/question/10216260
#SPJ4
Which of the following substances has the lowest density?
A mass of 5 mg and a volume of 6 uL (mcL)
A mass of 25 g and a volume of 45 mL
A mass of 250 mg and a volume of 180 uL (mcL)
A mass of 1.5 g and a volume of 1.2 mL
Hydrogen is the element with the lowest density in the periodic table and exists as a gas and osmium is the element with the highest density.
Define lowest density?
If the particles are loosely packed together with plenty of space between them, it will have a low density and will be able to float. And if the particles are tightly packed together with no or very little space between the particles, it will have higher density. This is so because if we divide each object's mass by its volume, and since all three objects have the same volume, the object with the larger mass will have the greatest density. And the object with the smaller mass, will have the lowest density.Water is densest at 3.98°C and is least dense at 0°C (freezing point). Water density changes with temperature and salinity. When water freezes at 0°C, a rigid open lattice (like a web) of hydrogen-bonded molecules is formed. It is this open structure that makes ice less dense than liquid water.To learn more about volume refers to:
https://brainly.com/question/463363
#SPJ1
where is the receptor located that binds to ethylene
The receptor located that binds to ethylene is located at the endoplasmic reticulum (ER).
What is Ethylene?The hydrocarbon ethylene has the chemical formula C2H4 or H2C=CH2. When pure, it is a colorless, combustible gas with a tinny "sweet and musky" smell. The simplest alkene is this one i.e. ethylene. The production of ethylene, which is used extensively in the chemical industry, far outpaces that of any other organic compound globally.
Ethylene has the following specifications:Formula: C2H4Molar mass: 28.05 g/molIUPAC ID: EtheneDensity: 1.18 kg/m³Melting point: -169.2 °CSoluble in: Water, Ethanol, Diethyl etherClassification: Alkene, Organic compoundTo know more about Ethylene visit :
https://brainly.com/question/14797464
#SPJ4
The _________ between positive and negative charges holds the atom together.
The electrostatic force between positive and negative charges holds the atom together.
Electrostatic attraction and repulsion are both aspects of the electrostatic force, which is created by the electric charge of individual particles. In some circles, it is also referred to as Columb's force. Charles-Augustin de Coulomb, a prominent French scientist, would be honored with the naming of the Columb attraction.
However, the electrostatic force is considered to be one of the four fundamental forces that exist in nature. When two charges with opposite signs, one positive and one negative, are brought into contact with one another, the resulting force is repulsion. The electrostatic force between positive and negative charges holds the atom together.
You can also learn about electrostatic force from the following question:
https://brainly.com/question/9774180
#SPJ4
3. What volume of nitrogen gas (N₂) is equal to 5.42x1022 molecules of this substance?
The volume of nitrogen gas equal to 5.42x1022 molecules of this substance is, 19.28 liters.
How to calculate molecules of the substance?
First we have to calculate the moles of nitrogen gas.
As 6.022x1023 molecules present in 1 mole of nitrogen gas
So 5.42x1022 molecules present in 5.42*1022/6.022*1023=0.8609mole of nitrogen gas.
Now we have to calculate the volume of nitrogen gas
As we know that, 1 mole of substance occupies 22.4 L volume of gas at STP.
As, 1 mole of nitrogen gas occupies 22.4 L volume of nitrogen gas
So, 0.8609 mole of nitrogen gas occupies 0.8609*22.4=19.28L volume of nitrogen gas
Therefore, the volume of 5.42x1022 nitrogen gas equal to molecules of this substance is, 19.28 liters.
To learn more about molecules substance refers to;
https://brainly.com/question/15890376
#SPJ1
An evacuated cylinder has a volume of 50 liters. If 20 liters of nitrogen gas and 20 liters of oxygen gas are pumped into this evacuated cylinder, how much of the cylinder is filled with the two gases?
An evacuated cylinder has a volume of 50 litres. If 20 litres of nitrogen gas and 20 litres of oxygen gas are pumped into this evacuated, cylinder is filled with the two gases with 50 litres.
From the kinetic theory of gases which says that a gas is in constant random motion, the gas does not have a specific volume but takes on the volume of the container as it will expand and fill the container.
Thus, the volume occupied by the two gases that is, nitrogen and oxygen, will be the same as the volume of the container.
Therefore, the nitrogen gas and the oxygen gas, will both occupy 50 litres together in the container.
To know more about volume of gas refer to-
brainly.com/question/4519953#
#SPJ4
What happens to the carbonyl peak in a non-conjugated system relative to a conjugated one? Peak wavenumber shifts left by 60 Peak wavenumber shifts right by 30 Peak wavenumber shifts left by 30 Peak wavenumber shifts right by 60
The carbonyl peak wavenumber shifts to the left by 30 in a conjugated system compared to a non-conjugated one.
In an IR spectroscopy, the carbonyl peak is characterized by a strong absorption band between 1710-1730 cm-1. The carbonyl peak is due to the stretching of the C=O bond. In non-conjugated systems, the carbonyl peak has a wavenumber of 1710-1730 cm-1, but in conjugated systems, the peak shifts to the left by 30 cm-1 to a wavenumber of 1680-1700 cm-1. The reason for this shift is that in conjugated systems, the carbonyl group is delocalized, meaning that the electrons in the carbonyl double bond are spread out over a larger area. This delocalization reduces the strength of the C=O bond and causes the peak to shift to the left. This shift allows to distinguish between a non-conjugated and conjugated carbonyl compound.
To know more about carbonyl click below:
brainly.com/question/13278063#
#SPJ4
which type of formula has the actual number of atoms in the molecule?
Molecular formula has the actual number of atoms in the molecule
A Molecular formula is a way to describe the chemical ratios of the atoms that make up a specific chemical compound or molecule in chemistry. Chemical element symbols, numbers, and occasionally other symbols, such as parentheses, dashes, brackets, commas, and plus (+) and minus () signs, are used to represent the chemical elements. These can only include one typographic line of symbols, which may also include subscripts and superscripts. A chemical formula has no words and is not the same as the chemical name. A chemical formula does not equal a complete chemical structural formula, despite the fact that it may suggest some basic chemical structures. Chemical formulae are often less powerful than chemical names and structural formulae, and they can only fully describe the structure of the simplest molecules and chemical compounds.
Learn more about Molecular formula
brainly.com/question/28647690
#SPJ4
g a rigid waled cubical container is completely filled with water at 40 f and sealed. the water is then heated to 100 f. determine the pressure that develops in the container when the water reaches this higher termperature
The pressure that is develops in the container when the water is reaches this higher temperature is 2.03 × 10³ psi.
According to the law of mass of conservation , wet :
Density (40 °C) × V = Density ( 100 °C ) × (V + ΔV)
ΔV/ V = ( Density (40 °C) / Density ( 100 °C ) ) - 1
ΔV/ V = 1.940 / 1.927
ΔV/ V = 0.00675
The change in volume and bulk modulus relation given as :
K = - ΔP / ( ΔV/ V)
ΔP = - 300000 × - 0.00675
ΔP = 2.03 × 10³ psi
To learn more about bulk modulus here
https://brainly.com/question/14602128
#SPJ4
What happens when oxygen reacts with sodium?
When oxygen reacts with sodium, a chemical reaction occurs in which the oxygen combines with the sodium to form sodium oxide (Na2O).
This reaction is highly exothermic and can be quite violent, releasing a great deal of heat and light. The reaction is typically accompanied by the formation of sparks and flames.Na2O is the chemical formula for sodium oxide, a compound composed of two sodium atoms and one oxygen atom. It is a white solid that is highly reactive with water and can be formed by heating sodium hydroxide or by the fusion of sodium and oxygen. It is also a basic oxide, meaning it reacts with acids to form salts and water. The reaction can be represented by the chemical equation: 2Na + O2 → 2NaO.
To know more about oxygen please refer:
https://brainly.com/question/13370320
#SPJ4
How many oxygen atoms are there in 1 mole of CO2?
CO2 is formed by the combination of the compounds C and O in the ratio 1:2. so. there are two oxygen atoms and one carbon atoms in one mole of CO2.
Compounds are the pure substances. According to the Law of Constant Proportions, the elements present in a compound are combined in a fixed ratio. As a compound of carbon dioxide (CO2) is formed by the combination of C and O in the ratio of 1:2. So, 1 molecule of carbon dioxide has 2 atoms of oxygen. So, 2 moles of oxygen atoms are there in one mole of CO2. Carbon dioxide is a chemical compound made up of molecules that each have one carbon atom covalently double bonded to two oxygen atoms. It is found in the gas state at room temperature. carbon dioxide is transparent to visible light but absorbs infrared radiation acts as a greenhouse gas.
To learn more about Law of constant proportion please visit:
https://brainly.com/question/12768510
#SPJ4
Fillin the words to complete each step in liquid spill cleanup Surround the area with Choose then cover the spill Scoop up the material and place in a plastic baq 3. Place the bagged waste in a Choose: Wipe down the area withl Chooso detergent and walor bloachi broom and dusipan
Spill-cleaning materials should never be reused because of the risk of contamination. This indicates that items like absorbents and cleaning supplies need to be stored and packaged for disposal of hazardous waste.
Different cleaning techniques are used depending on the type of soil that was spilled. These are the necessary steps in liquid spill cleanup Surround the area:
1. Once the area has been covered with the absorbent material, cover the whole spill.
2. Put all the material in a plastic bag that has been scooped up and collected.
3. Put every bagged piece of trash into a sturdy trash can and organize it there.
4. It is beneficial to use of soap, water, and cleaning agent to disinfect the region.
Learn more about liquid spill cleanup:
brainly.com/question/28930451
#SPJ4
How many H atoms are in 1.00 moles of H atoms?
H atoms are in 1.00 moles of H2 atoms are 1.204 x 10²⁴ atoms.
Atomic mass of H = 1u
The given mass of hydrogen = 2g
Molar mass of hydrogen = 2 [H] = 2 [1] = 2g
Number of molecules = Given mass / molar mass = 2 / 2 = 1 mole
Total number of hydrogen atoms in H₂ = 2
Number of hydrogen atoms in 1 mole of H₂ = 1 × 2 × 6.02
= 12.04 × 10²³
= 1.204 × 10²⁴ atoms
Therefore the number of hydrogen atoms in 1 mole of H₂ = 1.204 × 10²⁴ atoms.
To know more about atoms here
https://brainly.com/question/29695801
#SPJ4
On bill’s earth model, what section of the planet’s has the hottest temperature
The section of the planet with the hottest temperature is Death valley, according to Bill's earth model.
Why are parts of the earth hotter than other parts?Since the Earth is tilted on its axis, some places receive direct vertical sun rays and are hotter, such as the equator, while others receive slanted sun rays and are cooler. Differences in sunlight exposure, cloud cover, atmospheric circulation patterns, aerosol concentrations, and other factors vary from place to place, influencing whether and how much a location warms or cools.
Death Valley holds the world record for the highest air temperature, temperatures in the appropriately named Furnace Creek area of the California desert reached a scorching 56.7°C (134.1°F). Meanwhile, average summer temperatures frequently exceed 45°C (113°F).
Learn more on hottest temperate regions here: https://brainly.com/question/16999490
#SPJ1