3CaCl2 + Al2O3 —> 3CaO + 2AlCl

The mass of water required will be approximately [tex] \bf = 555.6\: g [/tex].

[tex]\qquad[/tex] 45g of salt [tex] \sf \longrightarrow[/tex] 100g of H₂O

[tex]\qquad[/tex] 250g of salt [tex] \sf \longrightarrow[/tex] x g of H₂O

[tex]\qquad[/tex] [tex]\red{\twoheadrightarrow\bf45\times x = 250\times 100}[/tex]

[tex]\qquad[/tex] [tex]\twoheadrightarrow\sf45x=25000[/tex]

[tex]\qquad[/tex] [tex]\twoheadrightarrow\sf x=\cancel{\dfrac{25000}{45}}[/tex]

[tex]\qquad[/tex] [tex]\red{\twoheadrightarrow\bf x = 555.6\:g}[/tex]

__________________________________________________

Answer:

B. atomic mass

Explanation:

He arranged the elements into rows in order of increasing mass so that elements with similar properties were in the same column.

Answer:

13.8 moles

Explanation:

You know that in a mole you have 6.022x10²³ something in this case of molecules. By knowing that by each mole you have 6.022x10²³ molecules, then you can establish the factor of conversion:

8.32x10²⁴molec of CO2 x 1 mol/6.022x10²³ molec of CO2

You divide 8.32x10²⁴/6.022x10²³ and you get 13.81 moles.

Answer:

did u get it yet

Explanation:

A.  Due to the repulsion between electrons, valence electrons will be arranged as close to each other as possible.

Therefore, the correct option is A.

Learn more:

brainly.com/question/12116076

Answer:

1 mole ozone gas

Explanation:

Since atomicity of Ozone (3) is maximum so, it will contain maximum number of atoms.

Answer:

[Unfortunately] Answer is A

Explanation:

You should know that 'liquid' is a state of matter and aqueous means that there is water present.

-It is mentioned that barium chloride is a solution. So you can cut off the C option.

-Barium sulfate is a salt which means it's a solid, so you can cut off the D option.

We now have A and B as the only options remaining.

-Dilute sulfuric acid is definitely not a liquid because water is present. (dilute indicates that there is a greater proportion of water)

The answer should be A.

Answer:

the mass of the air in the room is 4.96512 kg ( in 0°C)

Answer:

0.178M

Explanation:

The question can immediately be understood as comparing two states.

- The initial state M1 , V1.

- The Final state M2 , V2.

M - Molarity.

V - Volume (in mili liters/ml/ in this case).

The formula is stated as:

M1 * V1 = M2 * V2

Given- Required

M1 = 0.125M V1 = 265ml M2 = ?

V2 = 186ml

rearranged formula - M2 = M1 * V1 / V2 = 0.125M * 265ml / 186ml

= 0.178091397 M ~ ~ 0.178M.

Molecules are formed when two or more atoms chemically bond together. In 3H₂(SO)₄, three molecules are present.

Molecules are the smallest unit present in any compound and are formed by a group of atoms. A number denoted in front of the chemical species is the coefficient that represents the number of molecules.

The coefficient present in front of the reactant or the product in a chemical reaction gives the number of the molecules present in a compound. As three is denoted in front of the sulphuric acid, hence will be the number of the molecules.

Therefore, there are three molecules present in sulphuric acid.

Learn more about molecules here:

https://brainly.com/question/22055640

#SPJ1

Answer:

Polythene has the lowest melting/boiling point from all the other covalent structures mentioned in this question.

Answer:

Polythene (polyethene according the IUPAC nomenclature.)

Explanation:

Consider the structure of each option:

Melting each structure requires overcoming the forces that hold the structure rigid:

Van der Waal forces are much easier to break than covalent bonds.

Hence, the melting point of polythene would be the lowest among the options.

This question is asking for the correct balanced reaction, when solid aluminum reacts with gaseous oxygen to form solid aluminum oxide, according to the law of conservation of mass, which demands us to have the same number of atoms of each element on both sides of the equation.

In such a way, we can start by knowing there is one aluminum atom on the left and two on the right whereas there are two oxygen atoms on the left and three on the right side of the equation.

The aforementioned means we must balance oxygen first by putting a 2 on aluminum oxide and a 3 on oxygen in order to cross multiply and obtain six oxygen atoms on both sides of the equation.

Moreover, the 2 on the aluminum oxide makes four aluminum atoms on the right, which means we must put a 4 on the left-handed aluminum in order to get the correct balance, and therefore, write the following balanced equation:

4Al(s) + 3O₂(g) ⇒ 2Al₂O₃(s)

Hence, the coefficient for Al, as asked, is 4.

Learn more:

Answer:

metal : Mercury(Hg)

non metal : bromine (Br)

Explanation:

mercury is liquid at room temperature and pressure and the same as bromine

Answer:

atributes  of nonrenewable recources are things you cant re use after 1 use like gas

Explanation:

Answer: the answer is b. Are unlimited

Explanation:

Answer:

C.Energy is absorbed because the products have more chemical energy than the reactants.

Explanation:

Answer:

One element takes the place of another in a compound

Explanation:

I just took a test for it and got it right. :)

Hope This Helps :)

If 25.0ml neutralizes 35.0 ml of a 0.200M HCl solution, the molarity of KOH solution is 0.28M

The reaction between KOH solution and HCl is written below.

[tex]HCl + KOH \rightarrow KCl + H_2O[/tex]

Volume of KOH, [tex]V_B[/tex] = 25.0 ml

Volume of HCl, [tex]V_A=35.0 ml[/tex]

Molarity of HCl, [tex]C_A=0.200 M[/tex]

Molarity of KOH, [tex]C_B=?[/tex]

Number of moles of HCl, [tex]n_A=1[/tex]

Number of moles of KOH, [tex]n_B=1[/tex]

The mathematical equation for neutralization reaction is:

[tex]\frac{C_AV_A}{C_BV_B} =\frac{n_A}{n_B}[/tex]

Substitute  [tex]C_A=0.200 M[/tex],  [tex]n_A=1[/tex],  [tex]n_B=1[/tex],  [tex]V_B[/tex] = 25.0 ml, and  [tex]V_A=35.0 ml[/tex] into the equation above in order to solve for [tex]C_B[/tex]

[tex]\frac{0.2 \times 35}{C_B \times 25}=\frac{1}{1} \\\\25C_B=7\\\\C_B=\frac{7}{25} \\\\C_B=0.28M[/tex]

Therefore, the molarity of KOH solution is 0.28M

Learn more on molarity here: https://brainly.com/question/17138838

Answer:  For the reaction, K c = 255 at 1000 K. If a reaction mixture initially contains a CO concentration of 0.1550 M and a Cl 2 concentration of 0.171 M at 1000 K. 1.

Explanation:

Answer:

Hi the answer should be B or 2

Explanation:

Hope this helps!

Answer:

ʏᴇs, ɪ ᴛʜɪɴᴋ

Explanation:

TᕼᗩᑎKՏ ᒪOᗪՏ

Explanation:

a particle smaller than an atom (e.g., a neutron) or a cluster of such particles (e.g., an alpha particle).

Answer:

-Salts are composed of ions that form a tightly packed and ordered network, which is called a crystal lattice, and it is held together by ionic bonds.

Explanation: salts are ionic compounds, which are composed by oppositely charged ions (cations and anions) which are bonded each other by ionic bonds, in an ordered arrangement, often a crystalline solid.

-When a salt is added to a polar solvent like water, the ions interact with the solvent molecules via ion-dipole forces, which overcome the forces originally holding the ions together.

Explanation: the molecules of a polar solvent are dipoles because they have dipolar momentum (a difference in charge due to a electronegativiy difference). When a salt is dissolved in a polar solvent, it dissociates in ions. So, the resulting interactions between these species are ion-dipole forces.

-The ions are then isolated and stabilized in solution via these interactions, and when this occurs for most of the salt compound, it is considered soluble in that solvent.

Explanation: the ions in solution are surrounded by solvent molecules which stabilizes them. A salt which is enterely dissolved in a solvent is soluble in that solvent.

-Due to the nature of the interaction between ions and solvent molecules, a concentration of ions can be dissolved higher in water than in alcohol.

Explanation: water molecules have unique properties that make water an universal solvent. Due to these properties and its polarity, water can dissolve larger quantities of salt than other polar solvents such as alcohol.

The electrostatic force in water without salt  is stronger as compared to the  water due to the presence of free electrons.

Learn more about electrostatic:

https://brainly.com/question/9774180

Answer:

Alright the very first thing you need to do is balance the equation:

2HCl + Na2CO3 -----> 2NaCl + CO2 + H2O

Now we need to find the limiting reactant by converting the volume to moles of both HCl and Na2CO3.

Volume x Concentration/molarity = moles

0.235L x 0.6 M = 0.141 moles / molar ratio of 2 = 0.0705 moles of HCl

0.094L x 0.75 M = 0.0705 moles /molar ratio of 1  = 0.0705 moles of Na2CO3

Since both of the moles are equal, it means the entire reaction is complete (while the identification of limiting reactant may seem like an unnecessary step, it's quite essential in stoichiometry, so keep an eye out) and there is no excess of any reactant.

Now we know that the product we want to calculate is aqueous so, following the law of conservation of mass, we should add both volumes together to calculate how much volume we could get for NaCl.

0.235 + 0.094 = 0.329L of NaCl

Now we apply the C1V1 = C2V2 equation using the concentration and volume of Na2CO3 because it's molar ratio is one to one to NaCl (You can also use HCL, but you have to divide their moles by 2 for the molar ratio)  and the volume we just calculated for NaCl.

(0.75M) x (0.094L) = C2 x (0.329L)

Rearrange equation to solve for C2:

(0.75M) x (0.094L)  =  C2

    (0.329L)

C2 = 0.214 M (Rounded)

When the reaction is finished, the NaCl solution will have a molarity concentration of 0.214 M.

Answer:

The solution is made by adding 4.38 g NaCl to a 250-mL volumetric flask. About 100 mL of water are added and when all the NaCl dissolves water is added up ...

Answer:

matter refers to anything that has mass and volume which occupies space

The largest risks while designing a model to withstand a village include that the model does not mitigate the effects of the tsunami or only mitigates the effects partially, which would cause damages to the homes.

Designing a model to withstand the effect of any natural phenomenon such as an earthquake, fire or tsunami is not an easy task and will require the following cycle:

In the case of a model for tsunamis, it is likely the following problems occur:

This would lead to negative effects such as:

Note: This question is incomplete because the context is missing; here is the missing part.

Protecting Your Model Village from Tsunamis this task, you will design a model village to withstand the effects of a tsunami.

Learn more about tsunami in: https://brainly.com/question/1126317

Answer: During the summer, the sun's rays hit the Earth at a steep angle. ... Also, the long daylight hours allow the Earth plenty of time to reach warm temperatures. During the winter, the sun's rays hit the Earth at a shallow angle. These rays are more spread out, which minimizes the amount of energy that hits any given spot.

Answer:

[tex]4.4*10^{14}[/tex]Hz

Explanation:

Answer:

If garlic repels fleas, then a dog that is given garlic every day will not get fleas. Bacterial growth may be affected by moisture levels in the air. If sugar causes cavities, then people who eat a lot of candy may be more prone to cavities.

Explanation: