A 63 kg kg person starts traveling from rest down a waterslide 6.0 mm above the ground. At the bottom of the waterslide, it then curves upwards by 1.0 mm above the ground such that the person is consequently launched into the air. Ignoring friction, how fast is the person moving upon leaving the waterslide

Each of the three choices is tasteless, exhibitionist, juvenile, and dangerous.  John should do none of them.

Encountering a news crew, there's no reason for John to call attention to himself in a childish way, or interfere with their work in any way.

What he should do is:

==> Slow down

==> Pass the scene cautiously

==> Resume his normal, legal speed quietly, in case the crew happens to be recording audio at the moment.

Mysteriously, this course of action is nowhere to be found among the choices listed.

Answer:

all three options :)

Explanation:

cuz merica

Answer:

To summarize, an object moving in uniform circular motion is moving around the perimeter of the circle with a constant speed. While the speed of the object is constant, its velocity is changing. Velocity, being a vector, has a constant magnitude but a changing direction.

Explanation:

Speed refers to how fast an object is moving. It can be thought of as the rate at which an object covers distance.

Velocity refers to the rate at which an object changes its position. If you picture a person moving rapidly - one step forward and one step back- always returning to the original starting position, the speed is very rapid, but the velocity is zero. Because the person always returns to the original position, this motion would bébé result in a change in position. Since velocity is defined as the rate at which the position changes, this motion results in zero velocity. To maximize velocity, every effort must be made to maximize the amount an object is displaced from its original position. Every movement should be moving the object further from where it started. Velocity is DIRECTION AWARE. When evaluating the velocity of an object, you have to keep track of direction. This is one of the essential differences between speed and velocity: speed does not keep track of direction, while velocity is directionally aware.

So, when the moon moves around the Earth, the speed remains constant, but since it's moving in an elliptical orbit, it's direction is constantly changing.

Answer:

Infrasound vs. Ultrasound: Infrasound is sound that is below the lower limit of human hearing, below 20 Hz, and ultrasound is above the upper limit of human hearing, above 20,000 Hz.  Individuals use infrasound - this recurrence run for checking seismic tremors and volcanoes, graphing rock and oil developments underneath the earth. Infrasound is described by a capacity to get around hindrances with little scattering.  

For instance, a few creatures, for example, whales, elephants and giraffes convey utilizing infrasound over significant distances. Torrential slides, volcanoes, seismic tremors, sea waves, water falls and meteors produce infrasonic waves. Symptomatic ultrasound, additionally called sonography or demonstrative clinical sonography, is an imaging technique that utilizes high-recurrence sound waves to create pictures of structures inside your body. The pictures can give important data to diagnosing and treating an assortment of ailments and conditions.

Explanation:

idk how many words this is but its a start for u to add on to and i hope this helps and its in my own words - pls mark me brainiest

Answer:

Kelvin

Explanation:

The SI unit to use in measuring the temperature of hot liquid is kelvin (K)

your answer is...

C. potassium

Answer:

The distance traveled by the ball is 8.5 m

Explanation:

Initial height of the ball, h₁ = 1.5 m above the ground

final height of the ball, h₂ = 5m

Upward distance = distance traveled by the ball from a height of 1.5m to 5m = 5m - 1.5m = 3.5 m

Downward distance = distance traveled by the ball from 5m height to the ground =5m - 0 = 5m

Total distance traveled = upward distance + downward distance

Total distance traveled = 3.5 m + 5m = 8.5 m

Therefore, the distance traveled by the ball is 8.5 m

Answer:

In order to be in translational equilibrium, the net force (sum of the forces) must be 0.

Answer:

a

Explanation:

a_c = v_t^2/r

a_c = (0.5)^2/0.03

a_c = 8.33 m/s^2

Answer:

[tex] \boxed{\sf Work \ done = 4 \ J} [/tex]

Given:

Force = 8 N

Distance covered by the body = 50 cm = 0.5 m

Explanation:

Work Done = Force × Distance covered by the body

= 8 × 0.5

= 4 J

Answer:

The correct option is;

3. The total mechanical energy is constant as the block moves back and forth

Explanation:

The total mechanical energy is the sum of the potential and kinetic energies of the system

For a system that is isolated from the effects of external forces, but being acted upon by the internal conservative forces within the system, the total mechanical energy is constant

For a black and spring system, we have total mechanical energy, E = 1/2×K×A².

Where;

K = Constant

A = The amplitude of motion

Therefore, where there is no loss to friction, with A, remaining constant, the total mechanical energy will be constant.

Answer:

47.17 m

Explanation:

From the diagram of the question attached, The length of the legs are 25 m and 40 m . This legs form a right angle triangle with the length of the swimming course (L).

Pythagoras theorem states that for a right angle triangle with hypotenuse a and legs b and c, then:

a² = b² + c²

In the triangle, the length of the swimming course (L) is the hypotenuse and the two legs are 25 m and 40 m. Using Pythagoras:

L² = 25² + 40²

L² = 625 + 1600

L² = 2225

L = √2225

L = 47.17 m

Answer:

If you like my answer than please mark me brainliest thanks

Speed = Distance/time

Speed = 800/40

Speed = 20 metre per second

Answer:

hlo

Explanation:

hlo olz mark me as brainlest

Answer:

13.6 cm

Explanation:

From Snell's law:

n₁ sin θ₁ = n₂ sin θ₂

In the air, n₁ = 1, and light from the horizon forms a 90° angle with the vertical, so sin θ₁ = sin 90° = 1.

Given n₂ = 4/3:

1 = 4/3 sin θ

sin θ = 3/4

If x is the radius of the circle, then sin θ is:

sin θ = x / √(x² + 12²)

sin θ = x / √(x² + 144)

Substituting:

3/4 = x / √(x² + 144)

9/16 = x² / (x² + 144)

9/16 x² + 81 = x²

81 = 7/16 x²

x ≈ 13.6

Answer:

we learned that an object that is vibrating is acted upon by a restoring force. The restoring force causes the vibrating object to slow down as it moves away from the equilibrium position and to speed up as it approaches the equilibrium position. It is this restoring force that is responsible for the vibration. So what forces act upon a pendulum bob? And what is the restoring force for a pendulum? There are two dominant forces acting upon a pendulum bob at all times during the course of its motion. There is the force of gravity that acts downward upon the bob. It results from the Earth's mass attracting the mass of the bob. And there is a tension force acting upward and towards the pivot point of the pendulum. The tension force results from the string pulling upon the bob of the pendulum. In our discussion, we will ignore the influence of air resistance - a third force that always opposes the motion of the bob as it swings to and fro. The air resistance force is relatively weak compared to the two dominant forces.

The gravity force is highly predictable; it is always in the same direction (down) and always of the same magnitude - mass*9.8 N/kg. The tension force is considerably less predictable. Both its direction and its magnitude change as the bob swings to and fro. The direction of the tension force is always towards the pivot point. So as the bob swings to the left of its equilibrium position, the tension force is at an angle - directed upwards and to the right. And as the bob swings to the right of its equilibrium position, the tension is directed upwards and to the left. The diagram below depicts the direction of these two forces at five different positions over the course of the pendulum's path.

that's what I know so far

Answer:

 w = -101 rad / s

Explanation:

For this exercise we will use Faraday's law

          E = - dФ / dt

where the magnetic flux is

          Ф = B. A = B A cos θ

In this case, the angle between the magnetic field and the normal to the disk is zero, cos 0 = 1, they indicate that the field is constant, let's find the area

The area rotated by the disk is

         A = ½ r s

if we express the angles in radians

         θ = s / r

         s = r θ

where is the arc supported

         A = ½ r (r θ)

let us substitute in the Faraday equation

          E = - d (B ½ r² θ) / dt

          E = - ½ B r² dθ/dt

the definition of angular velocity is

          w = dθ/dt

          E = - ½ B r² w

           w = - 2E / B r²

let's calculate

         w = - 2 3.86 / (0.0314 1.56²)

         w = -101 rad / s

Answer:

12 i. The work done by Wale = 107.910 kJ

The work done by Lekan = 117.720 kJ

Total work done = 225.36 kJ

ii. Wale's power =  4.3164 kW

Lekan's power = 3.924 kW

Wale has more power and is more powerful than Lekan

13. 313.92 N

Explanation:

i. The work done, W = Force, F × Distance moved by the force, D

The given parameters are

The mass of Wale = 55 kg

The mass of Lekan = 60 kg

The acceleration due to gravity, g =9.81 m/s²

The motion force of Wale and Lekan are;

Motion force of Wale = 9.81 × 55 = 539.55 N

Motion force of Lekan = 9.81 × 60 = 588.6 N

The work done by Wale = 539.55 × 200 = 107910 J = 107.910 kJ

The work done by Lekan= 588.6 × 200 = 117720 J = 117.720 kJ

107910 + 117720 =225630 J = 225.36 kJ

ii. Power = Work done/time

Wale finished the race in 25 s, therefore, his power = 107910/25 = 4316.4 W

Lekan finished the race in 30 s, therefore, his power = 117720/30 = 3924 W

Wale has more power and is more powerful than Lekan

13. The velocity ratio = 5

V. R. = Distance moved by effort/(Distance moved by load)

Efficiency = 80%

Work done by effort = x

Work done by machine = Efficiency × Work done by effort  = 0.8 × x

Distance moved by effort, E = V. R. × Distance moved by load, D = 5 × D

Work done by effort = Force × Distance moved = 200×9.81× E

Work done by effort = 1962×E = 1962×E = 1962×5×D

Work done by machine = 1962 × D, when D = 1, we have;

0.8 × 1962×1 = 1569.6 J

Work done by effort = Force × Distance moved

Work done by effort = Force × 5×D = Force × 5 (D = 1)

From the principle of conservation of energy, we have;

Energy is neither created nor destroyed

Therefore

Work done by effort = Force × 5 = 1569.6 J

Force = 1569.6 /5 = 313.92 N.

Answer:

I assume its c. Since its talking about testing.

Explanation:

Answer:

The answer is test of durability

Explanation:

Answer:

OPTION (C)

Explanation:

m(magnification) = -0.4 means a real, inverted and diminished image is formed in front of the mirror.

Answer:

Both are the same.

Explanation:

[tex]pressure= \frac{force}{area} = \frac{f}{a} = \frac{n}{m {}^{2} } [/tex]

The SI unit was named after Bláise Pascal to honor him.

Hope this helps ;) ❤❤❤

Explanation:

2. Sum the torques about the fulcrum.

(450 N) (2 m) − (350 N) x = 0

x = 2.57 m

3. Sum the torques about the fulcrum.

(3600 N) (0.20 m) − F (0.90 m) = 0

F = 800 N

Mechanical advantage is the ratio between the load force and effort force.

MA = 3600 N / 800 N

MA = 4.5

Velocity ratio is the mechanical advantage divided by efficiency.  Assuming the lever is 100% efficient:

VR = 4.5 / 1

VR = 4.5

4. Mechanical advantage is the ratio between the load force and effort force.

MA = 900 N / 600 N

MA = 1.5

The velocity ratio is the distance moved by the effort divided by the distance moved by the load.  For a 3 pulley system, VR = 3.

Efficiency is mechanical advantage divided by velocity ratio.

e = 1.5 / 3

e = 0.50

5. Sum the torques about the fulcrum.

(-300 N) (0.10 m) + F (0.03 m) = 0

F = 1000 N

Answer:

Gravitational force will be 16 times more.

Explanation:

we know;

Gravitational force (F) = (Gm1m2)/d^2

when mass of each is doubled and distance between them is halved;

F= (G2m1×2m2)/(d/2)^2

=(4Gm1m2)/(d^2/4)

=4×4(Gm1m2)/d^2

=16(Gm1m2)/d^2

=16F

Answer:

The dust present in the clouds.

Explanation:

The complicated composition molecules that can be found in space are generally associated with clouds of dust. The significant amount of dust in these clouds provides protection not only for these molecules, but for any body that makes up or is associated with dust clouds.

It is exactly this dust that protects the molecules against the action of ultraviolet rays.

Answer:

Distance : 0.06533 meters or 65.33 mm

Explanation:

To solve this problem we can make the forces equal when the system is at equilibrium.

mass [tex]*[/tex] gravity ( constant ) = spring constant

where l = the length at which the rubber band is stretched

0.2 kg [tex]*[/tex] 9.8 m / s² = 30 N/m

1.96 kg [tex]*[/tex] m / s² = 30 N/m

l = 1.96 kg [tex]*[/tex] m / s² / 30 N/m = 0.06533 meters / 65.33 mm

The rubber band is stretched a distance of 0.06533 meters, or 65.33 mm.

Answer:

0.065

Explanation:

Apex i just got it right

Answer:

0.75 A ig.Hope it helps:))

Answer:

A dark fringe

Convert to m/s

[tex]\\ \sf \longmapsto 72\times \dfrac{5}{18}=5(4)=20m/s[/tex]

[tex]\\ \sf \longmapsto Acceleration=\dfrac{v-u}{t}[/tex]

[tex]\\ \sf \longmapsto Acceleration=\dfrac{0-20}{2}[/tex]

[tex]\\ \sf \longmapsto Acceleration=\dfrac{-20}{2}[/tex]

[tex]\\ \sf \longmapsto Acceleration=a=-10m/s^2[/tex]

Using second equation of kinematics

[tex]\\ \sf \longmapsto s=ut+\dfrac{1}{2}at^2[/tex]

[tex]\\ \sf \longmapsto s=20(2)+\dfrac{1}{2}(-10)(2)^2[/tex]

[tex]\\ \sf \longmapsto s=40+(-20)[/tex]

[tex]\\ \sf \longmapsto s=40-20[/tex]

[tex]\\ \sf \longmapsto s=20m[/tex]

Now

Using newtons second law

[tex]\\ \sf \longmapsto Force=ma[/tex]

[tex]\\ \sf \longmapsto Force=5000(-10)[/tex]

[tex]\\ \sf \longmapsto Force=-50000N[/tex]

[tex]\\ \sf \longmapsto Force=50kN[/tex]

Answer . The acceleration of the truck is 10m/[tex]s^{2}[/tex], and the distance covered is 40 m. Have attached the picture for solution.

Hope that helps.

Answer:

5×10⁻⁸ m²

Explanation:

I assume you mean the resistivity of the material is 50×10⁻⁸ Ωm.

R = ρL/A

10 Ω = (50×10⁻⁸ Ωm) (1 m) / A

A = 5×10⁻⁸ m²

Answer:

Since N/m is the unit of spring constant N/nm would be the possible unit for a spring constant.

A. N/nm is the possible unit for a spring constant.

The units at the spring regular are Newton/meter (N/m). The poor signal within the above equation is an indication that the direction that the spring stretches is opposite the path of the pressure that the spring exerts.

Because the force is measured in Newtons and the spring consistent is multiplied with the aid of the gap in meters, the spring constant need to have devices that get rid of meters, ensuing most effective force. The most effective devices that work for the spring regular are for that reason, Newtons in step with the meter.

Learn more about spring constant here: https://brainly.com/question/1968517

#SPJ2