If a ball is tossed horizontal at a speed of 7.9 m/s, it will travel 4.8 meters (horizontally).
What exactly does it entail to speed?Teenagers, young adults, and others take various stimulant medications collectively referred to as "speed" to feel more focused and alert, as well as occasionally to get high. Additionally, some people take various forms or speed to suppress their appetite.
How fast is relativistic motion?Relativistic speed is the rate at which relativity effects matter for the desired level of measurement precision of the phenomenon being examined. Relativistic effects are the differences between values calculated using models that take relativity into account and those that do not.
To know more about relativistic speed visit:
https://brainly.com/question/28224010
#SPJ13
the current in an inductor is changing at 120 a/s and the inductor emf is 51 v. what's the self-inductance?
the self-inductance is 0.425V.s/A
emf = L*di/dt
L = emf/ di/dt = 51/120 = 0.425V.s/A
Self-inductance is a characteristic of the current-carrying coil that opposes or resists changes in the current that passes through it. The self-induced emf generated in the coil itself is mostly responsible for this. Self-inductance is a phenomenon that occurs when a voltage is induced in a current-carrying wire, to put it simply.
When the current increases or drops, the coil's self-induced emf will oppose both movements. Essentially, if the current is increasing, the induced emf's direction is opposite that of the applied voltage, and if the current is decreasing, its direction is similar to that of the applied voltage.
Learn more about self-inductance here:
https://brainly.com/question/28167218
#SPJ4
6. what is the origin of the acceleration cue when in hover mode at 4 ktgs? in hover mode at 7 ktgs? in transition mode at 50 ktgs?
When the velocity vector is less than its maximum scale, the tip of the vector serves as the origin of the acceleration cue (6 KTGS). When the velocity vector is at or above maximum scale, the center of the LOS reticle serves as the origin of the acceleration cue.
Where does maximal velocity occur?Knowing that the system is in equilibrium at y=0, or when displacement and acceleration are both equal to zero, is known as the velocity maxima. As a result, the maximum velocity in simple harmonic motion at a given place can be calculated using the formula v=A. A velocity vector shows the rate of change in an object's position. The magnitude of a velocity vector represents an object's speed, whereas the vector's direction represents an object's direction. The apex—the highest point on any trajectory—is reached when vy=0. Given that we are aware of the initial location, initial and final velocities, and initial position, we may determine y using the equation v2y=v20y2g(yy0).
To learn more about maximal velocity refer to
https://brainly.com/question/20595261
#SPJ4
two cars collide inelastically and stick together after the collision. before the collision, the magnitudes of their momenta are p1 and p2 . after the collision, what is the magnitude of their combined momentum?
the magnitude of their combined momentum is p=p1+p2
In Newtonian mechanics, an object's mass and velocity are combined to create momentum, more precisely linear momentum or translational momentum. It is a vector quantity with a magnitude and a direction. When an object's mass (m) and velocity (v), which is also a vector quantity, are known, the result is the object's momentum.
The kilogram meter per second (kg m/s), which is equated to the newton-second in the International System of Units (SI), is the unit used to measure momentum.
According to Newton second law of motion, a body's rate of momentum change is equal to the net force acting on it. While momentum varies depending on the frame of reference, it is a conserved quantity in every inertial frame.
Learn more about momentum here:
https://brainly.com/question/904448
#SPJ4
how do permanent dipoles compare to dispersion forces and temporary dipoles in terms of formation and strength?
Permanent dipoles are created by the interaction of permanent charges, which are charges that do not lose their charge when they are separated, as opposed to temporary dipoles, which form when two unlike poles come into contact and then separate.
Permanent dipoles are strong; they can be formed even when there is no electrical current present. The strength of a permanent dipole depends on its size and intensity, but it's typically much stronger than a temporary dipole.
Dispersion forces are weaker than both permanent dipoles and temporary dipoles. They can be generated by any two objects whose surfaces have different charges, regardless of whether there is an electrical current present or not.
The strength of dispersion forces depends on the size and intensity of the charged object, but it's typically much weaker than a permanent or temporary dipole.
To learn more about dipoles visit: https://brainly.com/question/14173758
#SPJ4
what if a primordial black hole with the mass of our moon and a schwarzchild radius of 0.01cm approached, passed through, and exited the earth? what might happen to our planet and to life here?
When it will pass through our Earth, it will contain the whole of our earth as its gravitational field is so high.
What is a primordial black hole?A hypothetical type of dark gap that formed soon after the Big Bang is known as primordial dark openings. High densities and inhomogeneous circumstances in the early cosmos may have caused sufficiently thick regions to experience gravitational crumpling, which would have framed black openings. Supermassive dark gaps can be distinguished from bring down mass clusters by certain characteristics. Firstly, due to some SMBHs, the usual thickness of an SMBH (defined as the mass of the dark opening divided by the volume inside its Schwarzschild range) may be less than the thickness of water.Given that the volume of a round question, such as the occasion skyline of a non-pivoting dark opening, is specifically relative to the 3D square of the span, and that a dark gap's thickness is. On the other hand, conversely relative to the square of the mass, higher mass dark gaps have lower normal thickness, this is the reason. As with thickness, the tidal power of a body at the occasion of skyline is counterintuitively related to the square of the mass, Therefore, the tidal powers in the region of the occasion skyline are essentially weaker for monstrous dark apertures. It's a slow-moving event.When it will pass through our Earth, it will contain the whole of our earth as its gravitational field is so high.To learn more about primordial black hole, refer to
https://brainly.in/question/1181283
#SPJ4
When it will pass through our Earth, it will contain the whole of our earth as its gravitational field is so high.
What is a primordial black hole?A hypothetical type of dark gap that formed soon after the Big Bang is known as primordial dark openings.High densities and inhomogeneous circumstances in the early cosmos may have caused sufficiently thick regions to experience gravitational crumpling, which would have framed black openings.Supermassive dark gaps can be distinguished from bring down mass clusters by certain characteristics.Firstly, due to some SMBHs, the usual thickness of an SMBH (defined as the mass of the dark opening divided by the volume inside its Schwarzschild range) may be less than the thickness of water.Given that the volume of a round question, such as the occasion skyline of a non-pivoting dark opening, is specifically relative to the 3D square of the span, and that a dark gap's thickness is.On the other hand, conversely relative to the square of the mass, higher mass dark gaps have lower normal thickness, this is the reason.As with thickness, the tidal power of a body at the occasion of skyline is counterintuitively related to the square of the mass,Therefore, the tidal powers in the region of the occasion skyline are essentially weaker for monstrous dark apertures.It's a slow-moving event.When it will pass through our Earth, it will contain the whole of our earth as its gravitational field is so high.To learn more about primordial black hole, refer to
https://brainly.com/question/16578695
#SPJ4
9-3 is it possible for a small force to produce a larger impulse on a given object than a large force? explain.
It is possible for a smaller force with a longer time to be stronger than a larger force with a shorter time since impulse equals force x time.
Is it possible for a small force to produce a larger impulse?Yes, since impulse is defined as the product of the applied force and the applied time (J=Ft J = F t), a smaller force acting over a longer period of time may produce a larger impulse than a larger force acting over a shorter period of time. Force times time equals impulse.In comparison to a bigger force that acts over a much shorter period of time, a tiny force acting over a long period of time can easily produce more impulse (change in momentum). An object's momentum is a function of its mass times its velocity.An item can be propelled at the same speed by a tiny force applied over a long time as it can by a high force applied quickly.To learn more about larger impulse refer
https://brainly.com/question/28880024
#SPJ4
you toss a ball straight upward so it leaves your hand at a speed of 10.1 m/s. if the 3.3 kg ball started at rest and the tossing action lasted 0.33 s, what was the strength of the force exerted on the package by your hand?
The strength of the force exerted on the package by your hand: 101 N
We know v = u+at
v =10.1 m/s
u = 0
t =0.33 s
10.1 = 0+a*0.33
10.1 = a*0.33
a = 30.6 m/s^2
Force exerted F = ma
= 3.3*30.6
= 101
F = 101 N
What is Force ?A force is an effect that can change the motion of an object. Under the influence of a force, an object with mass can change its speed (e.g. move from standstill), i.e. to speed up A force can also be intuitively described as a push or a pull. A force has both magnitude and direction, so it is a vector quantity. It is measured in SI units Newton (N). Power is represented by the symbol F (formerly P).
To learn more about force, visit;
https://brainly.com/question/26572132
#SPJ4
the lift piston base and the input piston base are at the same height. what input force, , is required to maintain this system in equilibrium?
Input force = (Output force/Output area) × Input area
By Pascal Law,
Input force / input area = Output force / output area
By re-arranging,
Input force = (Output force/Output area) × Input area
You an learn more about this at:
brainly.com/question/20876179#SPJ4
a digital thermometer can make readings to the tenth of a degree at either the celsius setting or the fahrenheit setting. which reading would be more precise?
The Fahrenheit setting, since 1 degree Fahrenheit is smaller than 1 degree Celsius.
For general use, a straightforward formula exists to convert temperatures from Fahrenheit to Celsius. Just subtract 30 from the Fahrenheit value, and then divide that result in half.
Most objects we measure including length, width, time, and other dimensions—have one thing in common: their values all begin at zero. Zero of any of those units may be converted into another sort of unit quite easily because we all know exactly how long zero centimeters or inches are. Inches, metres, and centimetres all equal zero. As an illustration, let's use inches and centimetres. To move from 0 inches to 1 inch, we need to add 1 inch. This much is clear.
Similarly, we just need to add 1 centimetre to go from 0 centimetres to 1 centimetre. The quantity of space we are adding is the only distinction between adding one inch or one centimetre. One inch is 2.54 centimeters, according to the connection between the two units.
Learn more about Fahrenheit here:
https://brainly.com/question/13337083
#SPJ4
How can we statistically study the evolution of galaxies many billions of years ago?.
We can contrast distant galaxies with nearby galaxies.
The cosmos is 13.7 billion years old, but how can they know that?Although scientists are unsure of the universe's actual age, we estimate that it is somewhere between 13 and 14 billion years old. In order to determine the age of the universe, astronomers use two different methods: (a) searching for the earliest stars; and (b) measuring the universe's rate of expansion and projecting it back to the Big Bang.
How can the age of galaxies be determined?The amount of time it took for the galaxies to get to their current distances is therefore t=D/v. However, we know that v=H0D because to Hubble's Law. Therefore, t=D/v=D/(H0D)=1/H0. Thus, 1/H0 can be used as a rough estimate for the age of the Universe.
To know more about age of galaxies visit:-
https://brainly.com/question/15906708
#SPJ4
a spherical shell with radius r and uniform surface charge density spins with angular frequency w around the diameter. find the magnetic field
The magnetic field is [tex]\vec{m}=\frac{Q}{3} R^2 \vec{\omega}[/tex]
How to calculate magnetic field?The magnetic influence on moving electric charges, electric currents, and magnetic materials is described by a magnetic field, which is a vector field. A force perpendicular to the charge's own velocity and the magnetic field acts on it when the charge is moving through a magnetic field.
Uniformly charged spherical shell of radius R carries a total charge =Q
Hence it has surface charge density
[tex]\sigma=\frac{Q}{4 \pi R^2}[/tex]
It rotates about its axis with frequency=f
∴ Its angular velocity ω=2πf
Suppose the angular velocity [tex]\vec{\omega}=\omega \hat{z}[/tex]
To find the magnetic moment of spinning shell we can divide
it into infinitesimal charges. Using spherical polar coordinates (ρ,ϕ,θ) with origin at the center of the spherical shell, we consider infinitesimal area dS of a circular ring of infinitesimal width and of radius r located at a distance R from the origin on the surface of sphere.
Here [tex]\vec{r}=R \sin \theta \hat{r}[/tex] and coordinate ρ=R, is constant for each elemental area.
[tex]d q=\sigma d S=\sigma R^2 \sin \theta d \theta d \phi[/tex]
Current in the ring is given by
[tex]\begin{aligned}&d I=(d q) \times f=\left(\sigma R^2 \sin \theta d \theta d \phi\right) \times \frac{\omega}{2 \pi} \\&\Rightarrow d I=\frac{\omega \sigma R^2 \sin \theta d \theta d \phi}{2 \pi}\end{aligned}[/tex]
Now the magnetic dipole moment of ring is given by the expression in terms of position vector [tex]\vec{r}[/tex]current density [tex]\vec{J}[/tex]
[tex]\begin{aligned}&d \vec{m}=\frac{1}{2} \int_{\text {ring }} \vec{r} \times \vec{J} \\&\Rightarrow d \vec{m}=\frac{1}{2} d I \int_{\text {ring }} \vec{r} \times d \vec{l}\end{aligned}[/tex]
Line integral becomes equal to the circumference of ring
[tex]\therefore d \vec{m}=d I\left(\pi R^2 \sin ^2 \theta\right) \hat{z}[/tex]
Inserting value of dI we get
[tex]\begin{aligned}&d \vec{m}=\frac{\omega \sigma R^2 \sin \theta d \theta d \phi}{2 \pi}\left(\pi R^2 \sin ^2 \theta\right) \hat{z} \\&\Rightarrow d \vec{m}=\frac{\vec{\omega} \sigma R^4 \sin ^3 \theta d \theta d \phi}{2}\end{aligned}[/tex]
Total magnetic moment is integral with respect to both variables within respective limits
[tex]\begin{aligned}&\vec{m}=\frac{\vec{\omega} \sigma R^4}{2} \int_0^\pi \sin ^3 \theta d \theta \int_0^{2 \pi} d \phi \\&\Rightarrow \vec{m}=\frac{\vec{\omega} \sigma R^4}{2} \times \frac{4}{3} \times 2 \pi \\&\Rightarrow \vec{m}=\frac{4}{3} \pi \sigma R^4 \vec{\omega}\end{aligned}[/tex]
Rewriting in terms of charge Q
[tex]\begin{aligned}&\vec{m}=\frac{4}{3} \pi\left(\frac{Q}{4 \pi R^2}\right) R^4 \vec{\omega} \\&\vec{m}=\frac{Q}{3} R^2 \vec{\omega}\end{aligned}[/tex]
The complete question is : A spherical shell of radius R and uniformly charged with charge Q is rotating about its axis with frequency f. Find the magnetic moment of the sphere?
To learn more about magnetic field refer to:
https://brainly.com/question/14411049
#SPJ4
the earth's atmosphere is transparent tomost waves in thequestion 2 options:visible part of the spectrum.infrared part of the spectrum.ultraviolet part of the spectrum.entire electromagnetic spectrum.
The earth's atmosphere is transparent to most waves is visible part of the spectrum(option -1).
What wavelengths are transparent to the atmosphere of the Earth?To some microwave radiation wavelengths, but not to others, the Earth's atmosphere is transparent. The Earth's atmosphere is more easily penetrated by the longer wavelength microwaves than by the shorter ones (wavelengths more akin to radio waves).
When compared to open, closed, or partially closed windows, the Earth's atmosphere is only transparent to particular wavelengths of light. All of the radio waves, the majority of the IR light, and all of the visible light pass through the atmosphere.
It should be noted that the atmosphere is generally opaque in the infrared spectrum and completely transparent in the visible and infrared bands. In our hypothetical case, this would be entirely transparent (no absorption) in the solar band and uniformly absorb (and emit) throughout the earth emission band.
To know more about visible spectrum visit:
https://brainly.com/question/18704022
#SPJ4
A car is moving with a velocity of 32.78 m/s when a TURTLE wanders into the road. The driver then hits the brakes and comes to a complete stop over a time period of 4.63 seconds. Calculate the acceleration of the car. Round to the hundredths.
The acceleration of the car is - 7.08 m/s².
What is velocity?
The rate at which a body's displacement changes in relation to time is known as its velocity. Velocity is a vector quantity with both magnitude and direction. SI unit of velocity is meter/second.
Given parameters:
Initial velocity of the car; u = 32.78 m/s.
Take taken to stop it; t = 4.63
Then, the acceleration of the car: a =( final velocity - initial velocity) /time
= (0 - 32.78)/4.63 m/s².
= - 7.08 m/s².
Negative sign indicates that the velocity is decreasing at that rate.
So, the acceleration of the car is - 7.08 m/s².
Learn more about velocity here:
https://brainly.com/question/18084516
#SPJ1
what measure do seismologists use to calculate the distance from a seismic receiving station to the epicenter of an earthquake? group of answer choices the time interval between the first p wave and the last surface wave the magnitude of the ground acceleration of surface wave passing a receiving station the time elapsed between the first p wave arrivals from the first and last aftershocks the time interval between the arrivals of the first p and s waves the amplitude of the strongest s wave
Option A - the time interval between the first P-wave and first S-wave arrivals is correct.
Determine the difference between the first P-wave and the first S-arrival wave's periods, and then use that information to calculate the distance of the epicenter from the seismic recording station.
The study of elastic wave motion through the ground is known as seismology. Seismology of earthquakes is the finest method for investigating the earth's core. A portion of the energy released after an explosion or earthquake is transported through the earth as elastic waves. Stresses increase in the crust as the lithospheric plates of the Earth continue their sluggish motion, particularly close to the plate borders. Compression, tension, and shear stresses increase in the crust until they exceed the resistance of the rock or the friction along an existing fault. Then, an abrupt rock slide along a fault happens. The rocks lurch to their new location in a matter of seconds, and the ground trembles as the stress energy is released. Similar to growing ripples from a pebble thrown in still water, seismic waves propagate outward from the area of the fault that ruptured.
To clarify the options an image is attached.
You can learn more about seismology by visiting;
https://brainly.com/question/14363534
#SPJ4
Resonant standing waves are excited on a string that is fixed at both ends. The speed of the superposed traveling waves that yield the standing wave increases if.
When the tension in the string is reduced, the speed of the traveling waves that combine to form the standing wave accelerates.
What does conflict between people mean?When people are uneasy, distrustful of one another, and there is a chance of an unexpected act of violence or conflict, tension is the result. There is a good chance that the two nations' conflict will persist. Synonyms include conflict, animosity, uneasiness, and antagonism. More words for tension.
What's a good instance of tension?The force of compression opposes the tension. Each object in the scene that is in contact with another one applies a force to the other. Pulling a rope provides the best demonstration of a tension force. There is a large amount of tension created in the rope when a pull force is applied.
To know more about tension visit:
https://brainly.com/question/6359509
#SPJ4
what has more kinetic energy an object of mass 2m moving with speed 3v or an object of mass m moving with speed 4v
Kinetic energy The height of an object of mass m moving at speed 4v will be greater than that of an object of mass 2m moving at speed 3v. Kinetic energy = 0.5 m v2
A mass of 2 m moving at a speed of 3 v has kinetic energy of 9 m, while a mass of m moving at a speed of 4 v has kinetic energy of 8 m. The ability of an object to move another object is known as its kinetic energy. It is effective for a force to move an object. Furthermore, we are aware that an object in motion can cause a stationary object to move if it collides with it. It can therefore perform a function. The ability of an object to perform work as a result of its motion is how we define kinetic energy.
Learn more about kinetic energy here
https://brainly.com/question/1542593
#SPJ4
a skier traveling 11.0 m/s reaches the foot of a steady upward incline and glides 15 m up along this slope before coming to rest. what was the average coefficient of friction?
The average coefficient of friction of the track on which the skier is travelling is 0.59.
According to work energy theorem, the work done by conservative forces and the non conservative forces on the body is equal to the change in kinetic energy of the body.
So here, we know that the skier is travelling with a speed of 11m/s and he glide a distance of 15 m.
Here, we can write,
Mgd + uMgd = ∆K
Where M is the mass of the body,
g ji is the acceleration due to gravity,
d is the distance travel by the glider,
K is the change in kinetic energy,
U is the coefficient of friction.
Putting values,
Mgd + uMgd = 1/2Mv²
2(gd + ugd) = v²
u = (v²/2-gh)/gd
u = ((11)²/2 -10×15)/10×15
u = 0.59
So, the average coefficient of friction is 0.59.
To know more about coefficient of friction, visit,
https://brainly.com/question/14121363
#SPJ4
a player hits a baseball with mass of 0.145 kg over the outfield fence. the ball leaves the bat with a speed of 42.0 m/s and a fan in the bleachers catches it 14 m above the point where it was hit. neglect air resistance. what is the speed of the ball when it is caught?
When the ball is caught, it is moving at a speed of 3 m/s. Distance/time is the formula for calculating speed.
How do you tell the ball's speed?You must time how long it takes from when the ball is released until the pin is struck using a stopwatch. By dividing the distance by the time, one may calculate the ball's speed.
The average speed, if it was 3 seconds,
would be 42/14, or 3 feet per second .
Build a launcher for balls. I made use of an exercise rubber band and the legs of a patio chair.
horizontally when you shoot the ball. For this to operate, the camera angle must be horizontal.
Calculate how long the ball has been in the air.
The ball's distance traveled should be measured.
Simply dividing the distance by the launch time yields the launch speed.
To learn more about Speed refer to:
https://brainly.com/question/13943409
#SPJ4
you throw a rock straight down with an initial speed of 5 m/s. It took 4.5 seconds to hit the ground below. How high was the cliff?
The height of the cliff is 121.75 m.
What are the equation of motion?An equation of motion, describes the behavior of a physical system in terms of motion as a function of time. More specifically, the equations of motion describe the behavior of a physical system as a set of mathematical functions related to dynamic variables. The equations of motion are:
v = u + atut + 1/2 at²v² = u² + 2asFor the given case we will use the following equation:
s = ut + 1 / 2 gt²
s = Height of the cliff
u = Initial velocity of rock (5 m/s)
a = Gravitational acceleration (9.8 m/s²)
t = Time (4.5 sec.)
s = (5 × 4.5) + ( 1 / 2 × 9.8 × 4.5² )
s = 22.5 + 99.25
s = 121.75 m
To know more about equations of motion, visit:
https://brainly.com/question/14355103
#SPJ1
the hanging mass is referred to as m and it sets the centripetal force. group of answer choices true false
The answer is True
When we do not have the numerical value of mass.
The answer is False
By choosing a value of hanging mass it becomes false.
You can learn more about this at:
brainly.com/question/19694949#SPJ4
suppose you have two identical socks that exert a force of 10 n on each other. now you move them so they are three times as far apart as they were originally. (a) calculate the new force between the objects. (b) will this force be attractive or repulsive? please explain
(a) Since the separation is being tripled the force would go to 1/9 its original value if the charges remained constant because Coulomb's Law is an inverse square law. So, the new force is 10/9 N.
(b) because the pressure remains the equal and it became repulsive, initially, it will remain repulsive. One could also deduce this for the reason that the socks are equal.
Electrostatic repulsion can also be observed, for example, with an electroscope. It's a simple device consisting of a piece of metal sticking out of a glass jar and a thin metal leaf hanging inside. When the outer piece of metal touches the charged body, the Coulomb force causes the sheet to expand.
The repulsive force between oppositely oriented magnets. A compression material that repels the body on both sides. Repulsion is associated with involuntary vomiting such as in response to the ingestion of toxins.
Learn more about The repulsive force here:- https://brainly.com/question/27156060
#SPJ4
a 1000 kg safe is 2.0 m above a heavy-duty spring when the rope holding the safe breaks. the safe hits the spring and, in coming momentarily to rest, compresses it 50 cm. what is the spring constant of the spring?
The value of the spring constant of the spring is 156800N/m.
As per the work energy theorem, the work done in making the safe go down will be equal to the work done by the spring.
So it can be written
1/2kx² = mgh
K is the spring constant,
x is the compression,
m is the mass of the safe,
g is the acceleration due to gravity which is 9.8m/s²,
H is the height above the ground at which the safe is kept which is 2m.
Now, putting all the values,
1/2(k)(0.5)² = 1000(2)(9.8)
K = 156800 N/m.
So, the value of the spring constant is 156800 N/m.
To know more about spring constant, visit,
https://brainly.com/question/29291341
#SPJ4
Gabe is designing a flashlight that uses a parabolic reflecting mirror and a light source. the shape of the mirror can be modeled by a parabola that opens upward with a diameter of 4 in. and a depth of 1 in. the vertex of the parabola is at the origin. where should gabe place the bulb to ensure a perfect beam of light? (0, 1) (0, 4) (1, 0) (4, 0)
Gabe should place the bulb to ensure a perfect beam of light at (C) (1,0).
A reflective surface used to gather or project energy like light, sound, or radio waves is known as a parabolic, paraboloid, or paraboloidal reflector, dish, or mirror. Its form is a component of a circular paraboloid or the surface produced by a parabola rotating around its axis.
Suppose the equation of parabolic mirror is Y2 = 4ax
The given data in the problem is x = 1 and y = 2
So the subject value is y2 = 4ax
4 = 4 a (1)
4 = 4a
a = 1
So x = 1
thus focus is at (x, y) = (1,0)
Thus option C is the correct answer.
To learn more about parabolic reflecting mirrors, visit the link below:
brainly.com/question/11545608
#SPJ4
a thin oil slick (index of refraction 1.50) floats on water (index of refraction 1.33). when a beam of white light strikes this slick at normal incidence from air, the only enhanced reflected colores are red (650nm) and violet (390 nm). what is the minimum thickness of the oil
The oil slick measures 325 nm thick, at the very least. There are a few methods for measuring slicks between 0.1 and 10 m (0.0001-0.001 mm), but these aren't helpful for oil spill cleanup.
What is an oil slick known as?An oil spill is the inadvertent release of a liquid petroleum hydrocarbon to the environment as just a consequence of human activity (also known as an oil slick). This is the typical definition of an oil slick; alternative definitions are covered in the article.
What does oily hair refer to?A combination of dark blue, green, or purple tones are applied to darker hair in this style, which is also known as oil spill hair because it gives the hair a shimmering appearance. It resembles the pastel hair style, but instead of using ultra-pale colors, deeper colours are blended to create the iridescent look..
To know more about oil slick visit:
https://brainly.com/question/15097507
#SPJ4
A car (mass 1 000 kg) uses 50 000 J of energy (from fuel) to accelerate the car from rest to 5.5 m/s (about 20 km/h). How efficient is the car’s engine? ( Think, Eff = Eout/Ein x 100/1)
The energy output from the car is 15125 J and the input energy is given 50000 J. Thus, the efficiency of the car is 30.25 %.
What is engine efficiency?The efficiency of an engine is the ratio of its energy output to the energy input multiplied by 100. The efficiency of a heat engine can be found similarly using the input heat and output heat.
Given the mass of the car is 1000 Kg and it is accelerated to 5.5 m/s. Therefore the kinetic energy output is is calculated as follows:
KE = 1/2 mv²
= 1/2 1000 kg × (5.5 m/s)²
= 15125 J
The input energy is 50000 J. Therefore, the energy efficiency is :
efficiency = output energy / input energy × 100
= ( 15125 J/ 50000J ) × 100
= 30.25 %
Hence, the energy efficiency of the car is 30.25 %.
To find more on energy efficiency, refer here:
https://brainly.com/question/28939461
#SPJ1
an ac adaptor for a telephone answering unit uses a transformer to reduce the line voltage of 80 v (rms) to a voltage 9.8 v. the rms current delivered to an answering system is 392 ma. if the primary (input) coil in the transformer in the adaptor has 170 turns, how many turns are there on the secondary (output) coil? answer in units of turns.
The secondary coil of the transformer is 21 turns.
We need to know about transformers to solve this problem. The transformer is a device that changes the output voltage by using different turns on its coil. The ratio of output voltage and input voltage should follow this equation
Vo / Vi = Ns / Np
where Vo is output voltage, Vi is input voltage, Ns is secondary turns and Np is primary turns.
From the question above, the given parameters are
Vi = 80 V
Vo = 9.8 V
Np = 170 turns
By using the equation, we can calculate the secondary turns
Vo / Vi = Ns / Np
80 / 9.8 = 170 / Ns
Ns = 170 . 9.8 / 80
Ns = 20.825
Thus we can round the secondary turns to 21.
Find more on transformer at: https://brainly.com/question/25886292
#SPJ4
a 40-kg crate is being lowered with a downward acceleration is 2.0 m/s 2 by means of a rope. (a) what is the magnitude of the force exerted by the rope on the crate? (b) what would be the magnitude of the force exerted by the rope if the crate were being raised with an acceleration of 2.0 m/s 2?
a) Force exerted by the rope on the crate is equal to 312 N.
b) Force exerted by the rope if the crate were being raised with an acceleration of 2.0 m/s² is 472N.
What is force?In science, a force is a push or a pull in a specific direction. When one object interacts with another object, forces are created.
In physics, arrows are used to represent forces. An arrow pointing in the same direction will indicate the force's direction.
Given,
mass of a crate, m = 40 kg
Acceleration of crate, a = 2 m/s²
a) As carte is falling down, net force exerted by rope on the carte is given by : F = m(g-a)
F = 40(9.8-2)
F = 312 N
∴ required force exerted by the rope on the crate is equal to 312 N.
b) If the crate was raised with an acceleration of 2.0 m/s², than:
F = m(g+a)
F = 40 (9.8 + 2)
F = 472 N
∴ required force exerted by the rope if the crate were being raised with an acceleration of 2.0 m/s² is 472N.
To know more about force, visit:
https://brainly.com/question/13191643
#SPJ4
The magnitude of the buoyant force is equal to the weight of fluid displaced by the object. Under what circumstances is this statement true?.
The magnitude of the buoyant force is equal to the weight of the fluid displaced by the object if and only if the object is partially or completely submerged in a liquid.
What exactly is Buoyant Force?When a rigid object is immersed in a fluid (completely or partially), it experiences an upward force equal to the weight of the fluid displaced by the object.
This is referred to as Archimedes' principle.
[tex]F_{b}[/tex]= -ρgV
[tex]F_{b}[/tex] = force of buoyancy
ρ = density of fluid
g = gravitational acceleration
V = volume of fluid
If an object is partially or completely submerged in fluid, the fluid displacement is equal to the magnitude of the buoyant force.
Thus, The magnitude of the buoyant force is equal to the weight of the fluid displaced by the object if - For every object partially or completely submerged in a liquid.
To know more about buoyant force, visit:
https://brainly.com/question/21990136
#SPJ4
an elevator is moving down at a constant rate of 4 m/s. a person is standing on ascale that says the person weighs 80 n. when it reaches the bottom, it comes to a stop in 2 seconds. during the stopping process, what is the reading on the scale? (a picture of what is happening during the stopping of the elevator will help.)
The reading on the scale is 96.31 N.
What is meant by reading on the scale?The Reading Scale describes how people progress through the difficult process of learning to read. It provides teachers with methods for viewing and analyzing their observations of children's developing reading skills, knowledge, and comprehension.
When the elevator stops, its speed decreases from 4 m/s to 0 m/s.
This suggests a slowing down. The amount of force being applied to the
F= mass times acceleration
Assuming the deceleration is constant, we have the following equation:
V = U + at
Where V = Final speed = 0
U = initial speed = 4
a = acceleration
t = time
Solving, we get:
0 = 4 + 2a
a = -2 m/s^2
Solving, we get:
0 = 4 + 2a
a = -2 m/s^2
Thus the object decelerates at 2 m/s^2
The mass of the person = 80 / 9.81 = 8.155 kg
F = 8.155 * 2
F = 16.31 N
Weight in total: 80 + 16.31 = 96.31 N (This is the reading on the scale).
To learn more about reading refer to
brainly.com/question/15209636
#SPJ4
what is the point in the sky directly overhead called? which constellation is closest to this point tonight?
The answers include the following:
The point in the sky which is directly overhead is called Zenith.The constellation which is closest to this point tonight is Polaris.What is Constellation?This is referred to as a group of stars that form a perceived pattern or outline and are usually given names and an example is hydra.
The Zenith as the name implies is known as the overhead point in the sky which is usually hardly seen while the constellation which is closest to this point tonight is Polaris due to the position thereby making it the most appropriate choice.
Read more about Constellation here https://brainly.com/question/667281
#SPJ1