The GPE that the barbells have at max height is ,
3680.h j=11,000 units
where h= maximum height the barbells were lifted
work done by the championship lifter ,W = 11,000 units
weight of the barbells, N = 3680 N
The gravitational potential energy, P.E., the barbells had at their maximum height of lift is given as follows;
P.E. = m × g × h
Where;
m = The mass of the barbells;
g = The acceleration due to gravity = 9.8 m/s^2
h = The maximum height to which the barbells are lifted
m × g = The weight of the barbells = 3680 N
∴ P.E. = 3680 N × h = 3680·h J
we know the law of conservation of energy, according to this the work done by the weight lifter is equals to the maximum gravitational potential energy gained by the barbell is equal to energy at maximium height i.e P.E
therefore, GPE = 3680.h j = W = 11,000j is your answer.
learn more about it from the following link:
https://brainly.com/question/20561066What does water's high specific heat capacity explain about water?
A) why water bonds with other molecules
B) why water is often used as a solvent
C) why water is unable to absorb energy
D) why water is liquid at room temperature
Water's high specific heat capacity explains why why water bonds with other molecules.
The correct answer choice is option a.
Why water bonds with other moleculesWater has the ability to easily attract other molecules simply because of the fact its hydrogen and oxygen components is made up of positive and negative ions respectively.
Technically, the bonds in hydrogen possess a form of electrostatic force which makes it very possible for water to bond with other molecules with its high specific heat capacity.
So therefore, we can now confirm and deduce that from the simple note given above that the hydrogen bonds presence in water molecule makes it easy for water to combine with other molecules.
Read more on water:
https://brainly.com/question/25796102
#SPJ1
Sound cannot travel without medium write on the basis of the following points (materials required) (procedure) (conclusion
Explanation:
Because it is a mechanical wave and it need material medium to travel through it.
how much work must be done by an external force on an object (sliding over a frictionless, horizontal surface) to accelerate the object from a speed vv to a speed 2v2v?
Using the concepts of work, we got that we need to work three times of the previous work to accelerate the object from a speed v to a speed 2v.
We know that to change the velocity of any object we need to do some work on it.
When an object having some mass m moving with velocity v, then the kinetic energy stored in that object is given by(KE₁) =(1/2)mv².
Now, When an object having some mass m moving with velocity 2v,then the kinetic energy stored in that object is given by(KE₂) =(1/2)m(2v)².
New kinetic energy is =4[(1/2)mv²] or 4KE₁
So, net work to accelerate the object is =KE₂-KE₁
W=4KE₁-KE₁=3KE₁.
Hence, the amount of work must be done by an external force on an object (sliding over a frictionless, horizontal surface) to accelerate the object from a speed v to a speed 2v is 3 times the energy stored on a object.
To know more about work, visit here:
https://brainly.com/question/18094932
#SPJ4
If the gravity of the moon is 1/6 of Earth’s gravity, what is the mass of an object that has a weight of 115N on the moon? a)89 b)71.9 c)30.2 d)20
it's 115/6 which is 19.1667
Explanation:
The weight would be 115/6 because the moon has one sixth of the gravity on earth so the weight would be on sixth of that on earth.
It takes 6 people pulling with a force of 500. N each to begin moving the opposing team which was pulling with a combined force of 2500. N during a match of tug-of -war. If the total mass of both teams was 2000. kg, what was the force due to static friction? HELP ME .
From the calculations, we have the coefficient of friction as 0.026.
What is the coefficient of static friction?We know that friction has to do with the force that tends to oppose the motion of an object. As such, the point where the force of friction acts is actually the surface that lies between two bodies.
Now, we can see that It takes 6 people pulling with a force of 500 N each to begin moving the opposing team which was pulling with a combined force of 2500 N. This implies that the total force of the people that are pulling from this other side is 6 (500N) = 3000 N
Now we have the net force that is acting on the the rope as; 3000 N - 2500 N = 500 N
Then;
Coefficient of friction = Net force/ Normal reaction
= 500 N/(2000 * 9.8) N
= 0.026
Learn more about Coefficient of friction:https://brainly.com/question/13754413
#SPJ1
surface waves are caused primarily by what? question 6 options: frictional forces between wind and the ocean surface frictional forces at the level of the thermocline layer primarily gravitational forces of the moon large aquatic organisms breaching the ocean surface
Frictional forces between wind and the ocean surface are the primary cause of surface waves. This is the first option.
How are surface waves formed?The most common cause of waves is wind. Surface waves, also known as wind-driven waves, are formed by the frictional forces between wind and surface water. The continual disturbance creates a wave crest as wind blows across the surface of the ocean or a lake. Surface waves are found globally across the open ocean and along the coast.
There is also a type of waves called tidal waves. Tidal waves are caused by the gravitational pull of the Sun and Moon on Earth.
Learn more about surface waves here: https://brainly.com/question/25599999
#SPJ4
A 900 kg coaster car is 13 m high traveling at 28 m/s at point C. If point E is 10 m high, how fast will the car be traveling assuming no frictional forces?
The velocity of the car at point E which is 10 m is determined as 24.2 m/s.
What is the final velocity of the coaster?The final velocity of the coaster car is calculated by applying the principle of conservation of energy.
total kinetic energy of the coaster = total potential energy of the coaster
K.E = P.E
-¹/₂mv₁² + ¹/₂mv₂² = -mgh
-v₁² + v₂² = -2gh
v₂² = v₁² - 2gh
where;
m is the mass of the coasterv₁ is the initial velocity of the coasterv₂ is the final velocity of the coasterh is the height of travel of the coaterg is acceleration due to gravityThe given parameters include;
initial velocity of the coaster = 28 m/sheight of travel = 10 mv₂² = v₁² - 2gh
v₂² = (28²) - (2 x 9.8 x 10)
v₂² = 588
v₂ = √588
v₂ = 24.2 m/s
Thus, the final velocity of the coaster car at the given height will be smaller than the initial velocity due to effect of gravity.
Learn more about final velocity here: https://brainly.com/question/25905661
#SPJ1
3. (a) calculate the work done on a 1500-kg elevator car by its cable to lift it 40.0 m at constant speed, assuming friction averages 100 n. (b) what is the work done on the elevator car by the gravitational force in this process? (c) what is the total work done on the elevator car?
(a) Work done on the car by its cable will be 5.92 * [tex]10^{5}[/tex] J.
(b) Work done on the car by the gravitational force will be -5.92 * [tex]10^{5}[/tex] J.
(c) Total work done on the car will be 0 J.
Work done is the product of force and displacement.
Mathematically, Work-done = W = Force * DistanceMass of the car = m = 1500 kg
Distance lifted by the cable = d = 40 m
Frictional force experienced by the car = Fs = 100 N
(a) According to the Newton's second law of motion
F = Fcable - mg - Fs = ma
Fcable = mg + Fs
Work done by the same force = W1
W1 = Fcable * d
W1 = (mg + Fs) * d
W1 = (1500*9.8 + 100) * 40
W1 = 592600
W1 = 5.92 * [tex]10^{5}[/tex] J
(b) Work done by the gravitational force = W2 = mg * d
W2 = 1500*(-9.8)*40
Since the acceleration is acting downwards 'g' will be considered with a negative sign.
W2 = -5.88 * [tex]10^{5}[/tex] J
(c) The total work done on the lift is the work done by the net force exerted on the car during this process:
W3 = Fnet * d
Fnet = -5.88 * [tex]10^{5}[/tex] J + 5.92 * [tex]10^{5}[/tex] J
Fnet = 0
W3 = 0 * 40
W3 = 0 J
To know more about Work done,
https://brainly.com/question/13741431
#SPJ4
a funny car accelerates from rest through a measured track distance in time t with the engine operating at a constant power p. if the track crew can increase the engine power by a differential amount dp, what is the change in the time required for the run? (use any variable or symbol stated above as necessary.)
dT = -T^4/(2mD^2)dP
P = W/T = FD/T = (m a)D/T
dP = -maD/T^2 dT
dT = -T^2/(maD)dP
V = aT
D = 1/2 a T^2
a = 2D/T^2
dT = -T^4/(2mD^2)dP
You an learn more about this at:
brainly.com/question/24104647#SPJ4
you pull a box with a constant force of 250 n. the box moves 10 m along a straight path on a rough surface at a constant speed. how much thermal energy is generated in the system of the box and the rough surface?
The thermal energy of the box which is pulled with a force of 250 N to a distance of 10 meters is 2500 J
The force to pull the box = 250 N
The box is moved to a distance of 10 meters
The thermal energy can be found using the formula,
W = F x d
where W is the thermal energy
F is the Force
d is the distance moved
Let us substitute the known values in the above equation, we get
W = 250 x 10
= 2500 J
Therefore, the thermal energy of the box is 2500 J
Learn more about the thermal energy in
https://brainly.com/question/11278589
#SPJ4
Question 8
The scientist mixed a substance A into water. After mixing the substance the scientist
saw that most of the substance did not dissolve making the solution supersaturated.
The scientist wrote a conclusion on his experiment and noted that he put to much solute
in his solvent. Which of the following substances should the scientist use less of next
time substance A or water?
O Water
3 pts
O Substance A
O Solution
Answer:
It is likely water
Explanation:
Due to an average medium PH level it doesn't dissolve much.
two identical, parallel-plate capacitors are connected to identical batteries and allowed to charge fully. a dielectric is placed between the plates of one of the capacitors while still connected to the battery and allowed to reach a steady state. discuss whether the capacitance, charge, and electric potential of the capacitor with the dielectric are greater than, less than, or equal to the capacitor without the dielectric.
Capacitance, charge and electric potential will be greater than the capacitor without the dielectric.
Capacitance is the a property of an electric conductor or set of conductors that is measured by the amount of separate electric charge that can be stored on it per unit change in electric potential.
The value of capacitance for the parallel plate is C = (3∈0AK)/d
Since two identical, parallel-plate capacitors are connected
therefore the value of capacitance for both the plate is C
Ceq. = (C1*C2) / C1 + C2 = C*C / C+C = C2
When the battery remains connected, the potential difference [V] remains constant
Q=CV
∴Cafter>Cbefore [C increased]
∴Qafter>QBefore [Q increased]
Potential difference and charge across the capacitor before the dielectric:
Qbefore = [tex]\frac{CV}{2}[/tex]
Vbefore = Vafter = V
Potential difference and charge on the capacitor after inserting the dielectric:
Qafter = Ceq*V = [tex]\frac{kCV}{k+1}[/tex]
Vafter = Q*After / KC = [tex]\frac{\frac{kCV}{k+1}}{kc}[/tex]
Vafter= [tex]\frac{V}{k+1}[/tex] [K>1]
[Hence V decreases]
Vbefore > Vafter
Also, E = [tex]\frac{V}{d}[/tex]
therefore [E]before > [E]after [E decreases]
Energy stored in the capacitor:-
U=[tex]\frac{1}{2} CV^{2}[/tex]
As V= constant
Cafter > Cbefore .
Hence Uafter > Ubefore
Thus, the electrostatic potential increases.
To know more about Capacitance,
https://brainly.com/question/17126667
#SPJ4
an engineer cuts a 1.0-m-long, 0.33-mm-diameter piece of wire, connects it across a 1.5 v battery, and finds that the current in the wire is 8.0 a. of what material is the wire made?
The resistivity rho of the piece of the wire will be 1.60 × 10⁻⁸ Ωm. So, the material is copper wire.
Copper is the electrical conductor in many categories of electrical wiring. Copper wire is used in power generation, power transmission, power distribution for telecommunications, electronics circuitry, and countless types of electrical equipment.
The resistivity of a material is the resistance of a wire of that material of unit length and unit area of cross-section. Its S.I. unit is ohm-metre.
Learn more about resistivity here:- https://brainly.com/question/17046295
#SPJ4
two polarizers are oriented to each other by an angle of 75 degrees. polarized light with a polarization angle 25 degrees from the axis of the polarizer is incident on the first polarizer. how much of the light incident on the first polarizer (what percentage) makes it through the second?
82% of incoming polarized light with a polarization angle 25 degrees from the axis of the first polarizer will make it through the second polarizer.
We can use Snell's law to find out how much of the light makes it through the second polarizer.
Snell's law gives us:
sin(θ1)×sin(θ2)=n1×n2
Solving for n1, we get:
n1=(sinθ1cosθ2)/(sinθ1sinθ2)
We know that θ1 and θ2 are each 75 degrees, so we can put this into our equation:
n1=(0.5)(0.5)/(0.25)(0.75)=0.8333
This means that 82% of incoming polarized light with a polarization angle 25 degrees from the axis of the first polarizer will make it through the second polarizer.
To learn more about polarized light visit: https://brainly.com/question/17003853
#SPJ4
If a car, with an initial velocity of 15 m/s, accelerates at a rate of 5 m/s^2 for 4 seconds, what will its final velocity be?
Answer:
35 m/s
Explanation:
vf = vo + at
vf = 15 + 5(4) = 35 m/s
ssm a warehouse worker exerts a constant horizontal force of magnitude 85 n on a 40 kg box that is initially at rest on the horizontal floor of the warehouse. when the box has moved a distance of 1.4 m, its speed is 1.0 m/s. what is the coefficient of kinetic friction between the box and the floor?
The coefficient of the kinetic friction between the box and the floor is μk 0.21.
Friction is the force resisting the relative motion of strong surfaces, fluid layers, and fabric elements sliding against every different. There are several sorts of friction: Dry friction is a pressure that opposes the relative lateral movement of two solid surfaces in touch.
Calculation:-
Given,
mass = 40 Kg
Applied force F = 85 N
initial velocity u = 0 (rest)
distance moved = 1.4 meter
Final velocity = 1 m/s
coefficient of kinetic friction =?
Normal force = N = mg = 400 N
v² = u² +2as
a = v²/2s
= 1/2×1.4
= 0.36 m/s²
F = μkN
μk = F/N
= 85/400
0.21
Friction is a shape of touch pressure. It exists between the surfaces which are in touch. The frictional force relies upon on the person of the surface in contact. The rougher the floor, the greater the friction is involved. The frictional force is proportional to the urgent pressure, this is the weight of the body. it's far impartial of the place of the touch.
Learn more about friction here:-https://brainly.com/question/24338873
#SPJ4
according to the color code, the number of pairs of conductors in a cable that can be defined without repeating a color combination is?
According to the color code, the number of pairs of conductors in a cable that can be defined without repeating a color combination is 25 pairs
To identify individual conductors in a telecommunications twisted pair cable the 25-pair color code is used. These colours are marked on the conductor's insulation. The primary colours are white, red, black, yellow and violet. The secondary colours are blue, orange, green, brown and slate.
The primary colours are called as tip which is positive and the secondary colours are called as ring which is negative. In the pair only one colour from each group should be used. So the possible combinations are 25 pairs.
Therefore, according to the color code, the number of pairs of conductors in a cable that can be defined without repeating a color combination is 25 pairs
To know more about color code
https://brainly.com/question/18829138
#SPJ4
a projectile is fired into a region of no air resistance the horizontal component of velocity remains constant because projectiles
A) is not acted on by any horizontal force
B) is affected by gravity
C) has no vertical component of velocity
A projectile is fired into a region of no air resistance the horizontal component of velocity remains constant because projectiles
A) is not acted on by any horizontal force
Velocity remain constant until unless any net external force acts on the object . While in a projectile motion , there is a gravitational force which act in downward direction . And there is no horizontal force , hence horizontal velocity remain unchanged . Velocity remains constant because projectiles
A) is not acted on by any horizontal force
To learn more about projectile here :
https://brainly.com/question/13388411
#SPJ1
30.0-kg child sits on one end of a long uniform beam having a mass of 20.0 kg, and a 40.0-kg child sits on the other end. the beam balances when a fulcrum is placed below the beam a distance 1.10 m from the 30.0-kg child. how long is the beam? a 30.0-kg child sits on one end of a long uniform beam having a mass of 20.0 kg, and a 40.0-kg child sits on the other end. the beam balances when a fulcrum is placed below the beam a distance 1.10 m from the 30.0-kg child. how long is the beam? 2.07 m 1.93 m 2.12 m 2.20 m 1.98 m
The length of the beam on which the the two boys are lying is 1.01 m.
The mass of one kid is 30 kg and the mass of the beam is 20kg, the beam is balanced at a distance of 1.10 m from the 30 kg boy when a 40kg boy was sitting at the other end of the beam.
If the beam is balanced at 1.10 m from the 30kg boy it means that there lies the center of mass of the system.
So, let us assume the length of the beam to be X meters and the assume the center of mass to be at center.
So,
0 = M₁X₁ + M₂X₂/M₁+M₂
M₁ is 30kg and X₁ is 1.10m.
M₂ is 40kg and the X₂ is (X-1.10)m.
Putting values,
0 = 30 x 1.1 + 40 x (X-1.1)
(1.1 - X)40 = 3.3
X = 1.01 m.
So, the length of the Beam is 1.01 m.
To know more about Center of mass, visit,
https://brainly.com/question/28021242
#SPJ4
Joe is using a crowbar to remove a tree stump. He applies 2066 J of work to the crowbar. The output work of the crowbar is 1240 J. What is the efficiency of the crowbar?
Joe is using crowbar to remove tree stump. When output and input work is given then the efficiency can be calculated as 60%.
How is efficiency defined ?Efficiency can be defined as how good a device is at transferring input energy to useful output energy . The efficiency of a device is the proportion of the energy supplied that is transferred for useful work. The efficiency is calculated as a decimal or a percentage.
Given output work as 1240 J
input work as 2066 J
Then efficiency can be calculated by using the formula :
Efficiency= (output work/ input work) * 100%
=( 1240/2066) * 100%
Efficiency = 60%
To know more about efficiency, refer
https://brainly.com/question/3617034
#SPJ1
what effect does the amplitude setting on the function generator have on oscope display of the voltage in the small coil?
As the amplitude increases from the wave generator, the Voltages passing through the inductor will be higher. and consequently, the current passing through the inductor will also be higher Remember that when a voltage is applied across the inductor, the current is driven in the inductor due to the applied voltage.
When the applied voltage is sinusoidal it creates a sinusoidal current in the inductor with the same frequency as the applied voltage. As this current increases, it creates an induced potential difference proportional to the rate of change of current, and hence there is a sinusoidal induced voltage in the Inductor.
The function generator's amplitude control changes the voltage difference between the output signal's high and low voltage. Its direct current offset control changes the signal's average voltage with regard to the ground. A function generator is equipment to generate input functions for your circuit. It can generate sinewaves, square waves, triangular waves, modulated signals, and so on. An oscilloscope is equipment to display the signals in the circuit.
Learn more about The function generator here:-https://brainly.com/question/14499058
#SPJ4
forces and newton’s laws 3.1 Essential Questions How are force and motion related?
According to Newton's law of motion, the direction of motion of an object depends on the direction of the applied force.
What is Newton's first law of motion?
Newton's first law of motion states that an object at rest or uniform motion in a straight line will continue in that path unless acted upon by an external force and it will move in the direction of the applied force.
The Newton's first law of motion is also called the law of inertia because it depends on the mass of the object. The more massive an object is, the more inertia the object will possess and vice versa.
Also, the Newton's second law of motion states that the force acting on an object is directly proportional to the product of mass and acceleration of the object.
Mathematically, Newton's second law of motion is given as;
F = ma
F = mv/t
Ft = mv
This law (Newton's second law of motion) is also states that the force applied on an object directly proportional to the rate of change of momentum of the object.
Learn more about Newton's law of motion here: https://brainly.com/question/25545050
#SPJ1
the system produces 80,176 watts, what is the energy worth per day? assume electricity costs of $0.08 per kwh
Electricity costs of the system at $0.08 per kwh for a day is $153.9
What is power?Power refers to the rate of work. It is work done per unit of time. The SI unit for power is the watt (W), which is the joule per second (J/s).
Power = Work / time
P = W / t
One kilowatt hour is said to be one thousand watts sustained for one hour i.e. KWh = (Watts × Hours) ÷ 1,000
For the given case,
Power = 80,176 watts
Rate = $0.08 per kwh
kWh = (watts × hrs) ÷ 1,000
kWh = (80,176 × 24)
= 1924.224 kWh
Total cost of the day is = 1924.224 × 0.08
= $ 153.9
To know more about power visit:
https://brainly.com/question/13090447
#SPJ4
mountain goats can easily scale slopes angled at from horizontal. what are the normal force and the static friction force acting on a mountain goat that weighs 900 n and is standing on such a slope?
Using these formulas, determine the normal and static friction forces acting on the mountain goat.
What is normal force?
The normal force is the pressure that surfaces apply to stop solid objects from piercing one another. The normal force is a force in contact. Two surfaces cannot exert a normal force on one another if they are not in contact.
What exactly is static friction force?
An object experiences static friction when a force is applied to it; as a result, the object resists the applied force and stays at rest until static friction is removed. In kinetic friction, the frictional force opposes an object's motion.
Given:
The 60° angle from horizontal
900 N is the weight of the mountain goat.
To calculate the normal force, the weight perpendicular to the tilt must be resolved. As a result, we can write:
N = W CosΘ
= 900 N(Cos 60°)
= 900 N(0.5) (0.5)
= 450 N
The forces acting in conjunction with the inclination must all be added to determine the static friction force. We document:
F = W sinΘ
= 900 N(sin 60°)
= 900 N(0.8660254038) (0.8660254038)
= 779.42 N
Therefore, the normal force is 450 N, and the static friction force is 779.42 N.
Learn more about the normal force from the given link.
https://brainly.com/question/2254109
#SPJ4
A rocket is burning fuel at the rate of 300g/s and electing all the gas. In one direction of the rate of 500m/s what is maximum weight the rocket burn have if it going to move Vertically upward.
Correct option is D)
Overall momentum of the system is conserved.
Therefore, change in momentum of the rocket will be equal to that of the fuel.
Change in momentum of the fuel will be
Δmv=60000
Hence, change in momentum of the rocket will also be:
△P=60000
Thrust force F=
△t
△p
F=60000 N
Describe what is happening to the pressure and volume of the gas in the two diagrams below, assuming that the temperature of the gas does not change.
The pressure is increasing and accordingly the volume of the gas is decreasing when the temperature of the gas does not changes.
Continuous physical force acting on an object is termed as pressure.
Space occupied by any substance is termed as its volume.
As we know pressure and volume are inversely proportional to each other, this means that if the temperature and amount of any gas in a container is kept constant then the increase in pressure of the gas will cause decrease in the volume of the same gas in the container.
Pressure (P) ∝ [tex]\frac{1}{Volume (V)}[/tex]
When sign of proportionality '∝' is removed constant 'k' is added to the equation
i.e. P = [tex]\frac{k}{V}[/tex]
PV = k
So the given picture clearly depicts that the piston is creating pressure on the gas hence the pressure of the gas is increasing and therefore the volume of the gas is decreasing.
To know more about pressure,
https://brainly.com/question/28583355
#SPJ1
if a radiograph is done using an 80 inch ffd and 12 mas and a second image is done using a 40 inch ffd, what is the new mas that should be used?
The new mas that needs to be applied reduces mAs 1 devided by 4 , which is 3.
How do you locate fresh mAs?Milliamperage and time are multiplied to get the unit mAs (mA). A typical technique setting for imaging a hurt hand, for instance, may be 60 kVp, 100 mA, and 1/100 of a second (0.01). In this case, 100 milliamperes times 0.01 secondes = one milliampere (or 1 milliampere-second).Usually, the word "más" is used as an adverb to denote "more" or "most." Más, which means "more," can also be used as an adjective or pronoun. The term mais, which is a literary word that means "but," is not the same as the word más.To learn more about unit mAs (mA) refer to:
https://brainly.com/question/18779569
#SPJ4
NEED HELP ASAP
What is the acceleration due to gravity on the surface of the planet Pluto if its mass is 1.2 x 10 22 kg and radius is 1.14 x 10 6 m?
9.8 m/s2
6.4 m/s2
0.62 m/s2
0.34 m/s2
The acceleration due to gravity on the surface of planet Pluto is 0.62 m/s²
How to determine the acceleration due to gravityFrom the Newton's law of universal gravity, the acceleration due to gravity is given by:
g = GM / R²
Where
g is acceleration due to gravity M is the mass G is the gravitational constantR is the radius.With the above formula, we can obtain the acceleration due to gravity. Details below
Mass of planet (M) = 1.2×10²² KgRadius (R) = 1.14×10⁶ mGravitational constant (G) = 6.67×10¯¹¹ Nm²/Kg²Acceleration due to gravity (g) =?g = GM / R²
g = (6.67×10¯¹¹ × 1.2×10²²) / (1.14×10⁶)²
g = 0.62 m/s²
Thus, the acceleration due to gravity is 0.62 m/s²
Learn more about acceleration due to gravity:
https://brainly.com/question/12531555
#SPJ1
A thick magnetic disk made of aluminum platters. Uses read/write heads to access data stored on the platters.
A thick magnetic disk made of aluminum platters and It uses read/write heads to access data stored on the platters, that is correct statement.
Hard disk drives are thick magnetic disks made of aluminum platters, They use read/write heads to access data stored on the platters. They have up to several TB in storage capacity and their cost per MB is cheap. Solid state drive is a flash device with storage capacity similar to a small hard drive.
For operation point of view, Hard disk drives are bit slower than solid state drive are faster. so using a solid state drives devices are booted up fast. In case of price point of view, SSD devices are more costly than HDD.
To know more about magnetic disk, visit here
https://brainly.com/question/27844921
#SPJ4
a student slides her 80.0-kg desk across the level floor of her dormitory room a distance 5.00 m at constant speed. if the coefficient of kinetic friction between the desk and the floor is 0.400, how much work did she do? a student slides her 80.0-kg desk across the level floor of her dormitory room a distance 5.00 m at constant speed. if the coefficient of kinetic friction between the desk and the floor is 0.400, how much work did she do? 20.4 j 9.41 j 23.5 j 1.57 kj 15.7 j
Work she did 1.57kj.
Option d is correct
How do kinetic and static friction differ?Kinetic and Static Friction The friction that exists between two systems when they are in touch and immobile with respect to one another is known as static friction. Kinetic friction is the friction that occurs when two systems are in contact and moving in relation to one another.
F(net) = F(applied) - F(friction)
0 = F(applied) - F(friction)
F(applied) = F(friction) (1)
Work done = F(applied) *(desk travel distance)
From 1
Work done = F(friction)*(desk travel distance)
W = µNd
W = µmgd
W = (0.400)(80.0 kg)(9.81 m/s²)(2.00 m)
W =1568 J ← work done to move the desk.
W = 1.57kj
To know more about kinetic and static friction visit:-
https://brainly.com/question/17237604
#SPJ4