The charge on the particle is 5.6 × 10⁻¹¹ C.
Calculation:The magnitude of an electric field produced by a charge is given by:
E = q/ 4πε₀r²
where,
E = electric field
q = charge
r = distance
1/4πε₀ = 8.99 × 10⁹ Nm²/C²
Given,
E = 2.0 N/C
r = 50 cm = 0.5 m
To find,
q =?
Put the values in the above equation:
E = q/ 4πε₀r²
q = E (4πε₀r²)
q = 2.0 × (0.50²)/ 8.99 × 10⁹
q = 5.6 × 10⁻¹¹ C
Therefore, the particle has a charge of 5.6 × 10⁻¹¹ C.
What is an electric field?The physical field that surrounds each electric charge and acts to either attract or repel all other charges in the field is known as an electric field. Electric charges or magnetic fields with different amplitudes are the sources of electric fields.
I understand the question you are looking for is this:
A charged particle produces an electric field with a magnitude of 2.0 N/C at a point that is 50 cm away from the particle. What is the magnitude of the particle's charge?
Learn more about electric field here:
https://brainly.com/question/14857134
#SPJ4
question is down below
The vertical components of velocity is 10.35 m/s and the horizontal component of velocity is 38.6 m/s
What are the components of velocity?We know that velocity is a vector quantity, a vector often can be resolved into its components. The vertical components is V sinθ while the horizontal component is vcosθ.
Hence;
Vertical component = 40 m/s sin 15 degrees = 10.35 m/s
Horizontal component = 40 cos 15 degrees = 38.6 m/s
Learn more about components of velocity:https://brainly.com/question/14478315
#SPJ1
2. Find rectangular coordinates for the point (6, 240°).
Answer:
(-3, -3√3)
Explanation:
To convert from polar coordinate to rectangular coordinate, first you have to know these two equations:
[tex]\displaystyle{x=r\cos \theta}\\\displaystyle{y=r\sin \theta}[/tex]
We know that (x,y) is in rectangular coordinate form while (r,θ) is in polar coordinate form.
Therefore, substitute r = 6 and θ = 240° in both equations:
[tex]\displaystyle{x=6\cos 240^{\circ}}\\\displaystyle{y=6\sin 240^{\circ}}[/tex]
After evaluating, you'll get:
[tex]\displaystyle{x=-3}\\\displaystye{y=-3\sqrt{3}}[/tex]
Therefore, substitute x and y in rectangular coordinate form - hence, the answer is (-3, -3√3)
In its own reference frame, a box has the shape of a cube 1.5 m on a side. This box is loaded onto the flat floor of a spaceship and the spaceship then flies past us with a horizontal speed of 0.90 c.
Volume of the box observed at the given speed is 7.89 m³
Given:
Length of side of box = 1.5 m
horizontal speed = 0.90 c
To Find:
Volume of box
Solution: The amount of space occupied by a three-dimensional figure as measured in cubic units (as inches, quarts, or centimeters)
The edge length of the cube according to the stationary observer is calculated as
a' = a x √ 1 - v^2/c^2
a' = 1.5 x √ 1 - (0.9c)^2/c^2
a' = 1.5 x 0.19
a' = 0.285 m
The volume of the cube is calculated as follows;
V = A x a'
V = (a)^2 x a'
V = (1.5)^2 x 0.285
V = 7.89 m³
Thus, the volume of the box observed at the given speed is 7.89 m³
Learn more about Volume here:
https://brainly.com/question/463363
#SPJ4
A person performs a bench press. The bar's mass is 40 kg. When this person's arms are extended, the bar is 0.6 m above the starting point. How much work did the person do to push the bar off his chest to full extension of his arms
The work done by the person is 235.2 J.
Work done by the person
The work done by the person is calculated as follows;
W = mgh
where;
m is mass of the barheight through which the bar is raisedW = 40 x 9.8 x 0.6
W = 235.2 J
Thus, the work done by the person is 235.2 J.
Learn more about work done here: https://brainly.com/question/8119756
#SPJ1
A canister filled with 1.3 mol of single-atom helium gas has a temperature of 315 K. What is the approximate total internal energy of the gas? (Recall that the equation for kinetic energy due to translation in a gas is: 3/2 nRT; the equation for kinetic energy due to rotation of a molecule in a gas is: nRT; and R = 8.31 J/(mol.K).)
The total internal energy of the gas is 5104 Joule.
What is the internal energy of n mole of monoatomic gases?Internal energy= f/2 × nRTf = degrees of freedom, R= universal gas constant with value 8.31 J/(mol K), T= temperatureFor mono-atomic gas, degrees of freedom is 3. So internal energy= 3/2× nRTWhat is the internal energy of 1.3 mole of helium at 315K temperature?Internal energy of helium gas=
3/2 × 1.3 × 8.31 × 315
= 5104 joule
Thus, we can conclude that the internal energy of the helium gas is 5104 Joule.
Learn more about the internal energy here:
brainly.com/question/23876012
#SPJ1
Russia shut off the nord stream pipeline that supplies which nation with natural gas?.
Russia shut off the Nord Stream pipeline that supplies natural gas to Germany.
What is the Nord Stream pipeline?
A pair of offshore natural gas pipeline systems in Europe called Nord Stream cross the Baltic Sea from Russia to Germany. It consists of the Nord Stream 1 and Nord Stream 2 pipelines, both of which originate in northwest Russia, near Finland, in Vyborg and Ust-Luga, respectively. Both pipelines travel to Lubmin in the Mecklenburg-Vorpommern state of northeastern Germany.
Due to Russia's invasion of Ukraine, certification for Nord Stream 2 has been rejected. When referring to a larger network of pipelines, such as the feeding onshore pipeline in Russia and additional connections in Western Europe, the term "Nord Stream" is sometimes used.
Nord Stream joins the NEL pipeline to Rehden near Bremen in northwestern Germany and the OPAL pipeline to Olbernhau in eastern Germany at the Czech border in Lubmin.
Thus, the Nord Stream pipeline supplies natural gas to Germany.
Learn more about the natural gas pipeline here,
https://brainly.com/question/4417882
#SPJ4
Is the star moving toward earth, away from earth, or is there not enough information provided to determine its motion?
If a star is moving towards Earth, shift towards the blue end of the spectrum, this is called blue shift. If the star is moving away from Earth the light from that star will be red and is called red shift .
The faster a star moves towards the earth, the more its light is shifted to higher frequencies. In contrast, if a star is moving away from the earth, its light is shifted to lower frequencies on the color spectrum
if a star is moving towards Earth, it appears to emit light that is shorter in wavelength compared to a source of light that isn't moving. Because shorter wavelengths correspond to a shift towards the blue end of the spectrum, this is called blue shift.
If the star is moving away from Earth, its light will lose energy to reach Earth, therefore the light from that star will be red and is called red shift
learn more about blue shift :
https://brainly.com/question/5368237?referrer=searchResults
#SPJ4
PLS GIVE RIGHT ANSWER
I GIVE UP
YOU WILL GET 100 PTS or MORE
Answer:
it is in explanation part
Explanation:
9
7
3
2
5
8
1
11
14
12
13
Answer:
Explanation:
At 30° north latitude, at the northern edge of tropical (hadley) cell convection in the northern hemisphere, ________.
a. cool
b. dry
c. air sinks
d. becoming drier as it heats up
At 30° north latitude, at the northern edge of tropical (Hadley) cell convection in the northern hemisphere d. becoming drier as it heats up
Hadley cells: A cell in the tropics is called Hadley cell. Ferrel cells: In the middle latitudes the circulation is that of sinking cold air that comes from the poles and the rising warm air that blows from the subtropical high. At the surface these winds are called westerlies and the cell is known as the Ferrel cell.
As air is warmed at the equator it becomes less dense and rises, while at the poles the cold air is denser and sinks.
Because of the rotation of the Earth and the Coriolis Effect, rather than a single atmospheric convection cell in each hemisphere, there are three major cells per hemisphere. Warm air rising at the equator cools as it moves through the upper atmosphere, and it descends at around 30° latitude.
The convection cells created by rising air at the equator and sinking air at 30° are referred to as Hadley Cells, of which there is one in each hemisphere. The cold air that descends at the poles moves over the Earth’s surface towards the equator, and by about 60° latitude it begins to rise, creating a Polar Cell between 60° and 90°.
correct option is d. becoming drier as it heats up
To learn more about Hadley cells here
https://brainly.com/question/10769956?referrer=searchResults
#SPJ4
A laser is shone through a double slit and a particular interference pattern is observed on a screen some distance away. If the separation between the openings is increased, the distance between the fringes will
If the separation between the openings in a laser is increased, then the distance between the interference fringes decreases
What is Interference fringe ?Interference fringe refers to bands caused by different lights which can be found in phase or not each other.
Distances between laser fringes are short which is due to light wavelength.The interference fringes can be estimated by knowing slit separation and wavelength.In conclusion, if the separation between the openings in a laser is increased, then the distance between the interference fringe decreases
Learn more about Interference fringe here:
https://brainly.com/question/14264436
#SPJ4
1. Determine the energy released per kilogram of fuel used.
Given MeV per reaction, calculate energy in joules per kilogram of reactants.
Consider 1 mole of tritium plus 1 mole of deuterium to be a mole of “reactions” (total molar mass = 5 grams).
2. Determine the mass of fuel required for the expected energy consumption in the United States for the next 10 years.
Energy use per person per year in the United States = 3.5 × 1011 joules.
Base your calculations on a current population of 310,000,000.
1MeV = 1.6 x 10-13 J and 3.5 x 1011 joules of energy is energy in joules per kilogram of reactants.
The amount of fuel needed to meet US expectations for energy consumption over the next ten years.
In the US, each person uses 3.5 x 1011 joules of energy annually. 310,000,000 people make up the present population, thus use 1MeV = 1.6 x 10-13 J in your calculations.
In the US, annual energy consumption per person is equal to 3.5 x 1011Joules (estimated, varies by source, August 2009)
USA population: 310,000,000, roughly.
One mega electron volt, or one million electron volts, is designated as MeV. A particle with one electron charge will gain one MeV of energy when it passes through a potential difference of one million volts in a vacuum.
To learn more about Mev please visit -
https://brainly.com/question/13093080
#SPJ1
2. A ball is tossed straight upwards with a velocity of 60m/s. Using an estimate of gravity of -10m/s², about how many seconds would it take to reach the peak (top of the flight). A.) 10 seconds B.) 3 seconds C.) 6 seconds D.) 12 seconds
Answer: A
Explanation:
Visualizing the body in the position is significant because all observers have a common point of reference when describing and discussing its regions.
Visualizing the body in the anatomical position is significant because all observers have a common point of reference when describing and discussing its region.
What is the anatomical position?Anatomical position, also known as conventional anatomical position, refers to the body's position while it is standing erect and looking forward, with each arm hanging on either side of the body and palms facing forward. The legs are parallel, with the feet level on the floor and forward facing. When explaining particular anatomical words and locations in human anatomy and physiology, the anatomical position is a standard point of reference. Visualizing the body in its anatomical location is important because it provides a single point of reference for all observers when describing and discussing its region.As the description itself says, visualizing the body in its anatomical location is important because it provides a single point of reference for all observers when describing and discussing its region.
Therefore, visualizing the body in the anatomical position is significant because all observers have a common point of reference when describing and discussing its region.
Know more about the anatomical position here:
https://brainly.com/question/5029605
#SPJ4
The question you are looking for is given here:
Visualizing the body in the _____________ is significant because all observers have a common point of reference when describing and discussing its region.
A large box is being pushed across the floor at a constant speed of 4.0 m/s. What can you conclude about the forces acting on the box?
There is no force acting on the large box.
What is the force according to Newton's law?According to Newton's second law of motion, Force is defined as the rate of change of momentum with respect to time.Mathematically, force = mass × accelerationAnd acceleration = velocity/ timeHere, the large box is moving with constant velocity. So its velocity is not changing with time.So velocity / time = zero i.e. acceleration= zeroIt leads to the force to be zero.Thus, we can conclude that the force on the large box is zero.
Learn more about the Newton's second law of motion here:
brainly.com/question/25545050
#SPJ1
According to the theory of a symmetry breaking, at the moment of quark confinement, when the universe was 10-6 seconds old, what were the relative numbers of neutrons and antineutrons
At the time of quark confinement, when the universe was 10-6 seconds old, there is found to be one additional proton for every billion antiprotons.
What is quark confinement?Note that one quark is never found on its own but if particles are said to be smashed together and quarks are found, they are said to be like ends of rubber bands that expands.
Hence, At the time of quark confinement, when the universe was 10-6 seconds old, there is found to be one additional proton for every billion antiprotons.
Learn more about quark from
https://brainly.com/question/15103512
#SPJ1
A kettle transfers 6,000j of energy electrically. 1,500j of this is wasted. what is the efficiency of this kettle?
Answer:75 percent
Explanation:so in order tro fin d thge efficiency i used the forumla ,efficency=useful output energy/input energyx100%,in order to use this formula i needed the output,which i found by subtracting the input energy with wasted energy,that gave me the output,and after founding the output,i put that into the formula,
output energy=input energy - wasted energy
output energy=6000j-1500j
output energy=4500
put that into the formula
efficiency =output energy/input enrgy x100%
efficiency=4500/6000 multiplied by 100%
efficiency=0.75x100%
efficiency=75%
Voltage-gated calcium ion channels that function in neurotransmission are primarily found on the:_________
Voltage-gated calcium ion channels that function in neurotransmission are primarily found on the: excitable cells
A neurotransmitter is the body’s chemical messenger. They are molecules that transmit signals from neurons to muscles, or between different neurons. The transmission of signals between two neurons occurs in the synaptic cleft.
The electrical signals that travel along the axon are briefly converted into chemical signals through neurotransmitters.
Voltage-gated calcium (Ca2+) channels are key transducers of membrane potential changes into intracellular Ca2+ transients that initiate many physiological events. There are ten members of the voltage-gated Ca2+ channel family in mammals, and they serve distinct roles in cellular signal transduction.
They are found in excitable cells, not only in motor neurons but also in other types of excitable cells .
Voltage-gated calcium channels are important mediators of depolarization-evoked release of neurotransmitters. To ensure efficient coupling of calcium influx to rapid vesicle release, calcium channels must be localized within the active zones of presynaptic nerve terminals
To learn more about neurotransmitter
https://brainly.com/question/9725469?referrer=searchResults
#SPJ4
If we wanted to improve the efficiency of technology to reduce electrical power consumption. The sectors we would choose are?
If the efficiency of technology was to be improved in other to reduce electrical power consumption, the sectors which would be chosen is referred to as residential and commercial.
What is Technology?This is defined as the application of science to the practical aims and activities of human life. Power on the hand is defined as the amount of energy which is transferred per unit time and the S.I unit is referred to as Watts.
It can be inferred that electric power consumption is most abundant in residential and commercial sectors due to the number of appliances and hours which are present and used in this area.
It is therefore appropriate to focus on these two sectors so as to achieve the aim of an efficient technology in reduction of electrical power consumption.
Read more about Electric power here https://brainly.com/question/1125269
#SPJ1
The pressure due to the atmosphere is very large, why are we not crushed?
Answer:
It is because of the blood pressure balances with our atmospheric pressure
Which type of motorcycle features rear-positioned footrests, high power-to-weight ratio, and a forward leaning ride
Sport-type motorcycles typically feature a higher than average power-to-weight ratio.
Sport-style motorcycles often have a power-to-weight ratio that is above average. Fuel refers to opening the fuel supply valve, if available. Set the choke and squeeze the clutch lever together is referred known as "choke and clutch." Even though some motorcycles lack a choke, the choke should be ON for a cold engine.What is scrambler motorcycle?
Scrambler motorbikes, also referred to as dirt bikes, have special features designed for off-road activities and sports. Off-road, to be clear, is any route that isn't paved or that follows a set pattern. Scrambler bicycles feature relatively straightforward designs, long suspensions, and high ground clearance.Learn more about Scrambler motorbikes
brainly.com/question/24915434
#SPJ4
John is talking to his friend about painting a fence. He states that if he uses a roller brush he will cover the fence faster than if he uses a bristle brush. This is an example of a a. Law b. Belief c. Theory d. Hypothesis
Answer:
b
Explanation:
A radar receiver indicates that a pulse return as an echo in 20 μs after it was sent. How far away is the reflecting object? (c = 3.0 × 10^8 m/s)
A radar receiver indicates that a pulse return as an echo in 20 μs after it was sent. The reflecting object would be 3000 m away .
Phenomenon of hearing back our own sound is called an echo. It is due to successive reflection of sound waves from the surfaces or obstacles of large size. To hear an echo, there must be a time gap of 0.1 second in original sound and the reflected sound.
Given
time = 20 μs = 20 * [tex]10^{-6}[/tex] s
let distance to the reflecting surface be = x
total distance travelled by pulse will be = 2x
speed = 3.0 × [tex]10^{8}[/tex] m/s
distance = speed * time
2x = 3.0 × [tex]10^{8}[/tex] * 20 * [tex]10^{-6}[/tex]
x = 3000 m
The reflecting object would be 3000 m away
To learn more about echo here
https://brainly.com/question/14861578?referrer=searchResults
#SPJ4
The motor ___________ currents listed in NEC Tables 430.247 through 430.250 shall be used to determine the ampacity of motor circuit conductors and short-circuit and ground-fault protection.
The motor full load currents listed in NEC Tables 430.247 through 430.250 shall be used to determine the capacity of motor circuit conductors and short-circuit and ground-fault protection. This is further explained below.
What is currents?Generally, Moving through an area of water or air where there is less movement than the water or air itself, an eddies
In conclusion, Using the full load currents indicated in NEC Tables 430.247 through 430.250, the capacity of motor circuit conductors and short-circuit and ground-fault protection for motors should be determined.
Read more about currents
https://brainly.com/question/13076734
#SPJ1
Fire spreading from a wall to a nearby couch due to radiant heat transfer is an example of: Select one:
Fire spreading from a wall to a nearby couch due to radiant heat transfer is an example of heat reflectivity.
What is heat reflectivity?
When sunlight and other light sources strike a material's surface, its reflectance is measured. This number can be used to characterize a surface's characteristics in terms of surface finish. Another name for reflection is reflectivity.
This is a measurement of the amount of energy that material reflects at a specific wavelength. A value between 0 and 1 can also be used to represent reflectivity (or a percentage between 0 and 100).
Sigma and other top businesses have created a range of other forms of heat reflective fabric in the 50 years after the creation of space blankets, including Fabric and aluminum foil laminates, fabric laminates with metalized thin films.
Learn more about heat reflectivity here:
https://brainly.com/question/26105866
#SPJ4
A car heading north collides at an intersection with a truck of the same mass as the car heading east. If they lock together and travel at 28 m/s at 46° north of east just after the collision, how fast was the car initially traveling? assume that any other unbalanced forces are negligible.
Answer: A car heading north collides at an intersection with a truck of the same mass as the car heading east. If they lock together and travel at 28 m/s at 46° north of east just after the collision, then the car initially traveling with a velocity of 40.28m/s.
Explanation: To find the answer, we need to know more about the Perfectly inelastic collision.
What is perfectly inelastic collision?Collision is an interaction between two bodies due to which the individual momenta of the colliding bodies are changed, but the total momentum remains constant.If the colliding bodies stick together after collision, then it is called perfectly inelastic collision.here, the coefficient of restitution will be equal to 0.For, inelastic collision, the momentum is conserved, but the energy is not conserved.How to solve the problem?let's write the conservation equation of momentum as,[tex]m_1v_1+0=(m_1+m_2)v_2\\[/tex]
We have to find the value of initial velocity v1,[tex]mv_1=(m+m)28 sin46\\v_1=2*28*0.719=40.28 m/s[/tex]
Thus, we can conclude that, the initial velocity of the car will be 40.28m/s.
Learn more about the perfectly inelastic collision here:
https://brainly.com/question/28045028
#SPJ4
A motor has coils with a resistance of 27 and operates from a voltage of 235 V. When the motor is operating at its maximum speed, the back emf is 146 V. (a) Find the current in the coils when the motor is first turned on.
the current in the coil of the motor is 8.70A
The motor coil's resistance is R = 27.
The motor's working voltage is V o = 235 V.
When the motor is running at its top speed, the rear emf is V b =141V.
The initial coil current when the motor is turned on must be calculated.
using the information provided,
I=VoR=(235v/27Ω)=8.70A
The number of turns is the first element that affects the current coil's strength. The current in amperes increases with the number of revolutions. The number of turns in a coil also multiplies the magnetic field. The strength of the current of the coil passing through the conductor is the second crucial element.
To learn more about the current of the coil please visit -
https://brainly.com/question/13789073
#SPJ4
On what does the magnitude of an applied torque depend?
Answer:
See below
Explanation:
The force applied and the length of the arm
The magnitude of an applied torque depend on force vector, 'θ' is the angle between r and F, and the distance vector.
What is torque?
The force that can cause an object to rotate along an axis is measured as torque. Similar to how force accelerates an item in linear kinematics, torque accelerates an object in an angular direction. A vector quantity is a torque.
Torque is defined as Γ=r×F=rFsin(θ). In other words, torque is the cross product of the force vector, where 'θ' is the angle between r and F, and the distance vector (the distance between the pivot point and the place where force is applied).
The magnitude of an applied torque depend on force vector, 'θ' is the angle between r and F, and the distance vector.
To learn more about torque refer to the link:
brainly.com/question/6855614
#SPJ2
A 2. 0mc charge in an external field of 20n/c, north (direction) will experience a force of: ___0. 04____________ newtons, the direction of the force is __north___________
2. 0 mc charge in an external field of 20n/c, north (direction) will experience a force of 0.4 newtons, the direction of the force is north
Force in an electric field = charge * electric field
given
charge = 2* [tex]10^{-3}[/tex] C
electric field = 20 N/C
Force in an electric field = 2* [tex]10^{-3}[/tex] * 20
= 0.04 N
since , external field is in north direction then the force must be in north direction because the direction of an electric field at a point is the same as the direction of the electric force acting on a positive test charge
hence, 2. 0 mc charge in an external field of 20n/c, north (direction) will experience a force of 0.4 newtons, the direction of the force is north
learn more about electric field
https://brainly.com/question/15800304?referrer=searchResults
#SPJ4
A machine has a mechanical advantage of 0.6. what force should be applied to the machine to make it apply 600 n to an object? 100 n 360 n 1000 n 3600 n
Answer:
frictional force, should be applied to the machine
Answer: C) 1000N is needed to be applied.
Explanation: Have a Good day!!
use the tools to measure the velocity of the cart after the string was cut. This velocity will be a constant on a smooth surface (after the spring is no longer pulling). What value did you get for the velocity
The value gotten for the velocity after using the use the tools to measure the velocity of the cart after the string was cut is positive
What is velocity?Velocity can simply be defined as the rate of change of displacement with time
Velocity is measured in meters per second (m/s)
So therefore, thee value gotten for the velocity after using the use the tools to measure the velocity of the cart after the string was cut is positive
Learn more about velocity:
https://brainly.com/question/16000616
#SPJ1