a) A polyfunctional acid is an acid that has more than one functional group.
b) The equations of dissociation of phosphoric acid are:
H₃PO₄ + H₂O ⇄ H₂PO₄⁻ + H₃O⁺ H₂PO₄⁻ + H₂O ⇄ HPO₄²⁻ + H₃O⁺ HPO₄²⁻ + H₂O ⇄ PO₄³⁻ + H₃O⁺c) The equation for calculating the concentration of H₃O⁺ is [tex] [H_{3}O^{+}] = (\frac{K_{1}K_{2}K_{3}[H_{3}PO_{4}]}{[PO_{4}^{-3}]})^{1/3} [/tex]
a) A polyfunctional acid can be defined as an acid that has more than one functional group. Phosphoric acid (H₃PO₄) is an example of polyfunctional acid since it is composed of three hydroxyl groups joined to a phosphorus atom, which is also joined to an oxygen atom by a double bound. In that structure, the three hydrogen atoms of the hydroxyl groups give the acidic behavior to this compound.
b) Phosphoric acid has three equations of dissociation:
H₃PO₄ + H₂O ⇄ H₂PO₄⁻ + H₃O⁺ (1)H₂PO₄⁻ + H₂O ⇄ HPO₄²⁻ + H₃O⁺ (2)HPO₄²⁻ + H₂O ⇄ PO₄³⁻ + H₃O⁺ (3)The dissociation constants for the three above equations are:
[tex] K_{1} = \frac{[H_{2}PO_{4}^{-}][H_{3}O^{+}]}{[H_{3}PO_{4}]} [/tex] (4)
[tex] K_{2} = \frac{[HPO_{4}^{2-}][H_{3}O^{+}]}{[H_{2}PO_{4}^{-}]} [/tex] (5)
[tex] K_{3} = \frac{[PO_{4}^{3-}][H_{3}O^{+}]}{[HPO_{4}^{2-}]} [/tex] (6)
c) We can calculate the concentration of H₃O⁺ for each equilibrium with the equations (4), (5), and (6).
The general reaction of dissociation of phosphoric acid is given by the sum of equations (1), (2), and (3):
H₃PO₄ + 3H₂O ⇄ PO₄³⁻ + 3H₃O⁺ (7)
The concentration of H₃O⁺ for the total dissociation reaction (eq 7) can be found as follows:
[tex] K_{t} = \frac{[PO_{4}^{-3}][H_{3}O^{+}]^{3}}{[H_{3}PO_{4}]} [/tex] (8)
Where:
[tex] K_{t} = K_{1}*K_{2}*K_{3} [/tex]
Hence, by knowing the dissociation constants K₁, K₂ and K₃, and the concentrations of PO₄³⁻ and H₃PO₄, the [H₃O⁺] is:
[tex][H_{3}O^{+}] = (\frac{K_{1}K_{2}K_{3}[H_{3}PO_{4}]}{[PO_{4}^{-3}]})^{1/3}[/tex]
You can find more about acid dissociation constant in the link: https://brainly.com/question/1372520?referrer=searchResults
I hope it helps you!
If there are a 1000 ml per 1 L and a 1000g per kilogram
a. How many ml are there in 5.0 L?
b. How many kg are there in 230g?
Answer:
hbchbjH j jas a aa a s ds d as das
Explanation:
g Which ONE of the following molecules and ions has trigonal planar molecular geometry? (NOTE: You must first determine what the Lewis structure of each substance is.) A) PCl3 B) HCN C) CO3 2– D) H3O+ E) NF3
Answer: C) [tex]CO^{2-}_{3}[/tex]
Explanation: The Valence Shell Electron Pair Repulsion Model (VSEPR Model) shows bonding and nonbonding electron pairs present in the valence, outermost, shell of an atom connecting to other atoms. It also gives the molecular geometric shape of a molecule.
To determine molecular geometry:
1) Draw Lewis Structure, i.e., a simplified representation of the valence shell electrons;
2) Count the number of electron pairs (count multiple bonds as 1 pair);
3) Arrange electron pairs to minimise repulsion;
4) Position the atoms to minimise the lone pair;
5) Name the molecular geometry from the atom position;
Trigonal planar molecular geometry is a model which molecule's shape is triangular and in one plane. Such molecule has three regions of electron density extending out from the central atom and the repulsion will be at minimum when angle between any two is 120°.
The Lewis structure of each molecule is shown in the attachment.
Analysing each one, it can be concluded that molecule with trigonal planar geometry is [tex]CO^{2-}_{3}[/tex]
which of the following is is a chemical property of pure water
Answer:
Pure water has an acidity of about 7 on the pH scale. -is a chemical property of pure water. Pure water has an acidity of about 7 on the pH scale
Answer: không màu , không mùi không vị
Explanation:
In the reaction of Zn(s) + 2HCl (aq) Imported Asset ZnCl2 (aq) + H2 (g), if [HCl] increases from 2.6 M to 8.2 M:
The rate at which Zn disappears decreases.
The rate at which H2 appears decreases.
The rate at which ZnCl2 appears increases.
The concentration of Zn (s) also increases.
Answer:
The rate at which ZnCl2 appears increases.
Explanation:
Hello,
In this case, the reaction is:
[tex]Zn(s) + 2HCl (aq) \rightarrow ZnCl_2 (aq) + H_2 (g)[/tex]
Therefore, the law of rate proportions is:
[tex]\frac{1}{-1}r_{Zn}= \frac{1}{-2}r_{HCl}= \frac{1}{1}r_{ZnCl_2}= \frac{1}{1}r_{H_2}}[/tex]
In such a way, since the concentration of hydrochloric acid is increasing The rate at which ZnCl2 appears increases, because the addition of a reactant is directly related with the products formation due to the fact that more reactant will yield more product.
Best regards.
what is mean by old bonds broken
Sorry I didn'mean to answer this. I was thinking more along the lines of relationships.
Explanation:
Answer:
Chemical reactions make and break the chemical bonds between molecules, resulting in new materials as the products of the chemical reaction. Breaking chemical bonds absorbs energy,while new bonds releases, energy with the overall chemical reaction being endothermic or exothermic.
[tex]pH = -log10[H+ ][/tex]. If [tex][H^+][/tex] is [tex]1.2 * 10^-^6[/tex], what is the [tex]pH[/tex]? (F5 to refresh page if you can't see it)
Which state of matter does this image represent? Image of water Solid Liquid Gas Plasma
Answer:Liquid
Explanation:
From the following balanced equation, CH4(g)+2O2(g)⟶CO2(g)+2H2O(g) how many grams of H2O can be formed when 1.25g CH4 are combined with 1.25×10^23 molecules O2? Use 6.022×10^23 mol−1 for Avogadro's number.
Answer:
2.81 g of H2O.
Explanation:
We'll begin by calculating mass of O2 that contains 1.25×10²³ molecules O2.
This can be obtained as follow:
From Avogadro's hypothesis, we understood that 1 mole of any substance contains 6.022×10²³ molecules. This implies that 1 mole of O2 also contains 6.022×10²³ molecules.
1 mole of O2 = 16x2 = 32 g.
Thus 6.022×10²³ molecules is present in 32 g of O2,
Therefore, 1.25×10²³ molecules will be present in =
(1.25×10²³ × 32) / 6.022×10²³ = 6.64 g of O2.
Therefore, 1.25×10²³ molecules present in 6.64 g of O2.
Next, the balanced equation for the reaction. This is given below:
CH4(g) + 2O2(g) —> CO2(g) + 2H2O(g)
Next, we shall determine the masses of CH4 and O2 that reacted and the mass of H2O produced from the balanced equation.
This can be obtained as follow:
Molar mass of CH4 = 12 + (4x1) = 16 g/mol.
Mass of CH4 from the balanced equation = 1 x 16 = 16 g
Molar mass of O2 = 16x2 = 32 g/mol.
Mass of O2 from the balanced equation = 2 x 32 = 64 g
Molar mass of H2O = (2x1) + 16 = 18 g/mol.
Mass of H2O from the balanced equation = 2 x 18 = 36 g
From the balanced equation above,
16 g of CH4 reacted with 64 g of O2 to produce 36 g if H2O.
Next, we shall determine the limiting reactant.
This can be obtained as follow:
From the balanced equation above,
16 g of CH4 reacted with 64 g of O2.
Therefore, 1.25 g of CH4 will react with = (1.25 x 64)/16 = 5 g of O2.
From the above calculations, we can see that only 5 g out of 6.64 g of O2 is needed to react completely with 1.25 g of CH4.
Therefore, CH4 is the limiting reactant.
Finally, we shall determine the mass of H2O produced from the reaction.
In this case, the limiting reactant will be used because it will give the maximum yield of H2O.
The limiting reactant is CH4 and the mass of H2O produced from the reaction can be obtained as follow:
From the balanced equation above,
16 g of CH4 reacted to produce produce 36 g if H2O.
Therefore, 1.25 g of CH4 will react to produce = (1.25 x 36)/16 = 2.81 g of H2O.
Therefore, 2.81 g of H2O were obtained from the reaction.
The mass in grams of H₂O which can be formed when 1.25g CH₄ are combined with 1.25×10²³ molecules O₂ is 2.8 grams.
What is stoichiometry?Stoichiometry of any reaction tells about the amount of species present before and after the completion of the reaction.
Given chemical reaction is:
CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(g)
Moles of CH₄ will b calculate as:
n = W/M, where
W = given mass = 1.25g
M = molar mass = 16g/mol
n = 1.25/16 = 0.078 moles
Molecues of CH₄ in 0.078 moles = 0.078×6.022×10²³ = 0.46×10²³
Given molecules of O₂ = 1.25×10²³
Required molecules of CH₄ is less as compared to the molecules of O₂, so here CH₄ is the limiting reagent and formation of water is depends on it only.
From the stoichiometry of the reaction it is clear that:
1 mole of CH₄ = will produce 2 moles of H₂O
0.078 moles of CH₄ = will produce 2×0.078=0.156 moles of H₂O
Mass of H₂O will be calculated by using its moles as:
W = (0.156)(18) = 2.8g
Hence required mass of H₂O is 2.8g.
To know more about limiting reagent, visit the below link:
https://brainly.com/question/1163339
An object has a mass of 4.9g and a volume of 14.ml.what is the density of the object?
Answer:
0.35 g/mL
Explanation:
Use the formula D = [tex]\frac{m}{v}[/tex], where D is density, m is mass, and v is volume.
D = 4.9/14
D = 0.35
D = 0.35 g/mL
What compound is formed when methyloxirane (1,2-epoxypropane) is reacted with ethylmagnesium bromide followed by treatment with aqueous acid
Answer:
Pentan-2-ol
Explanation:
On this reaction, we have a Grignard reagent (ethylmagnesium bromide), therefore we will have the production of a carbanion (step 1). Then this carbanion can attack the least substituted carbon in the epoxide in this case carbon 1 (step 2). In this step, the epoxide is open and a negative charge is generated in the oxygen. The next step, is the treatment with aqueous acid, when we add acid the hydronium ion ([tex]H^+[/tex]) would be produced, so in the reaction mechanism, we can put the hydronium ion. This ion would be attacked by the negative charge produced in the second step to produce the final molecule: "Pentan-2-ol".
See figure 1
I hope it helps!
A 1.00 liter flask initially contained 0.24 mol NO2 at 700 K which decomposed according to the following equation. When equilibrium was achieved, 0.14 mol NO was present. Calculate Kc. 2NO2(g) ↔ 2NO(g) + O2(g)
Answer:
[tex]Kc=0.14[/tex]
Explanation:
Hello,
In this case, for the given reaction, the equilibrium expression is:
[tex]Kc=\frac{[NO]^2[O_2]}{[NO_2]^2}[/tex]
That in terms of the reaction extent [tex]x[/tex] is written as (initial concentration of NO2 is 0.24 M for 0.24 mol in 1.00 L):
[tex]Kc=\frac{(2*x)^2(x)}{(0.24M-2*x)^2}[/tex]
Moreover, since at the equilibrium 0.14 moles of NO are present (a 0.14-M concentration), we can compute the reaction extent as shown below:
[tex][NO]=2*x=0.14M[/tex]
[tex]x=0.14M/2=0.07M[/tex]
In such a way, knowing [tex]x[/tex], we compute Kc as shown below:
[tex]Kc=\frac{(2*0.07)^2(0.07)}{(0.24M-2*0.07)^2}\\\\Kc=0.14[/tex]
Regards.
The kc is 0.14.
Equivalent expression:Since
[tex]Kc = \frac{[NO]^2[O_2]}{[NO_2]^2}\\\\[/tex]
Here the reaction extent x should be written like the initial concentration of NO2 is 0.24 M for 0.24 mol in 1.00 L.
Now
[tex]Kc = \frac{(2\times\ x)^2}{(0.24M - 2\times x)^2}[/tex]
Since at the equilibrium 0.14 moles of NO are presented so the reaction should be
NO = 2*x = 0.14m
x = 0.07
Now kc should be
[tex]= \frac{(2\times 0.07)^2 (0.07)}{(0.24M - 2\times 0.07)^2}[/tex]
= 0.14
Learn more about equation here: https://brainly.com/question/24710653
Select all of the following statements that represent the differences between a voltaic cell and an electrolytic cell. Group of answer choices The electrodes will change in mass for only the electrolytic cell Reduction happens at the cathode for only the electrolytic cell The redox reaction is spontaneous for only voltaic cell Electrode with the lowest reduction potential is reduced in an electrolytic cell A potential is generated when the voltaic cell runs
Answer:
The electrodes will change in mass for only the electrolytic cellElectrode with the lowest reduction potential is reduced in an electrolytic cellA potential is generated when the voltaic cell runsThe following statements represent the differences between a voltaic cell and an electrolytic cell -
The redox reaction is spontaneous for only voltaic cell potential is generated when the voltaic cell runsThe process occurs spontaneously in the voltaic cells due to chemical reactions.electrolytic cell electrical energy is needed for the chemical reactions to occur.A potential is generated by a chemical reaction and for electrolytic cells, a potential is needed.
there is definitely an exchange of mass in a voltaic cellthe species with lower reduction potential always gets reduced and in any electrochemical cell reduction occurs at the cathode.The following statements represent the differences between a voltaic cell and an electrolytic cell -
The redox reaction is spontaneous for only voltaic cell potential is generated when the voltaic cell runsThus, The following statements represent the differences between a voltaic cell and an electrolytic cell -
The redox reaction is spontaneous for only voltaic cell potential is generated when the voltaic cell runsLearn more:
https://brainly.com/question/3614785
Testbank Question 47 Consider the molecular orbital model of benzene. In the ground state how many molecular orbitals are filled with electrons?
Answer:
There are fifteen molecular orbitals in benzene filled with electrons.
Explanation:
Benzene is an aromatic compound. Let us consider the number of bonding molecular orbitals that should be present in the molecule;
There are 6 C-C σ bonds, these will occupy six bonding molecular orbitals filled with electrons.
There are 6 C-H σ bonds, these will occupy another six molecular orbitals filled with electrons
The are 3 C=C π bonds., these will occupy three bonding molecular pi orbitals.
All these bring the total number of bonding molecular orbitals filled with electrons to fifteen bonding molecular orbitals.
The decomposition of nitramide in aqueous solution at 25 °C NH2NO2(aq)N2O(g) + H2O(l) is first order in NH2NO2 with a rate constant of 4.70×10-5 s-1. If an experiment is performed in which the initial concentration of NH2NO2 is 0.384 M, what is the concentration of NH2NO2 after 31642.0 s have passed? M
Answer:
[tex][NH_2NO_2]=0.0868M[/tex]
Explanation:
Hello,
In this case, for the given chemical reaction, the first-order rate law is:
[tex]r=\frac{d[NH_2NO_2]}{dt} =-k[NH_2NO_2][/tex]
Which integrated is:
[tex][NH_2NO_2]=[NH_2NO_2]_0exp(-kt)[/tex]
Thus, the concentration after 31642.0 s for a 0.384-M solution is:
[tex][NH_2NO_2]=0.384M*exp(-4.70x10^{-5}s^{-1}*31642.0s)\\[/tex]
[tex][NH_2NO_2]=0.0868M[/tex]
Best regards.
Answer:
[A] = 0.0868 M
Explanation:
Rate constant = 4.70×10-5 s-1
First order reaction
Initial concentration, [A]o = 0.384 M
Final concentration, [A] = ?
Time, t = 31642.0 s
All these variables are related by the following equation;
[A] = [A]o e^(-kt)
[A] = 0.384 e^(-4.70×10-5 x 31642.0)
[A] = 0.384 e^(-1.4872)
[A] = 0.384 * 0.2260
[A] = 0.0868 M
Entropy, the degree of disorder is related to the number of configurations that a system can adopt. If the entropy of a system is 71.85 J/mole*K, the number of configurations possible for this system is:
(a) 7188
(b) 9967
(c) 5665
(d) 2183
Which of the following metals will liberate hydrogen from dilute HCL? A. Ag B.Au C.Hg D.Sn
Answer:
ag and au are sure not to react. but hg and sn might or might not
By heating a 93% pure kclo3 sample, what percentage of its mass is reduced?
2KCLO3---->2KCL+3O2
Explanation:
free your mind drink water and go outside take fresh air you will get answers
Which method separates components of a mixture according to how quickly the particles travel through a medium?
A. distillation
B. evaporation
C. filtration
D. chromatography
Taking into account its definition, the correct answer is option D) Chromatography.
Chromatography is a method that allows the separation, identification and determination of chemical components in complex mixtures. By means of a chromatography it is possible to separate analytes that are very similar to each other in terms of their physico-chemical properties.
For the separation to occur, the principle of selective retention is used, which consists of the different behavior of the components of a mixture on a specific support (such as paper, a gas, a liquid) and a flowing liquid or gaseous phase. through the bracket.
In other words, there is a stationary phase immobilized on a support and a mobile phase that will drag the sample through the stationary phase. During this process, each component of the sample will move according to its own physicochemical characteristics. The general concept will be that those components that prefer the stationary phase are more retained, while those that prefer the mobile phase will move faster.
In summary, the components of the sample are distributed between two phases of different nature, as a consequence of the speed variation that is established when being dragged by a mobile, liquid or gaseous phase, through a stationary, solid or liquid phase.
Finally, the correct answer is option D) Chromatography.
Learn more about chromatography: https://brainly.com/question/15057878?referrer=searchResults
Which if the following symbols is NOT used to indicate a state of matter in an equation? A. None of these B. "aq" C. "l" D. "g"
Answer:
I'm not 100% sure but I think A. "None of these" is correct
Explanation:
Option B. "aq" denotes that the substance is an aqueous solution
Option C. "l" means the element is in a liquid state
Option D. "g" denotes that the substance is in a gaseous state
Hope this helped :))
The phase or state of matter is the form that is observable and is in the form of solid, liquid, or gas. The phases of the matter can be expressed as aq, l, g, s. Thus, option A is correct.
What are phases of matter?Phases of matter are distinctive and observable matters that have varying particle composition, volume, shape, symbols, etc. There are four known states of matter namely gas, liquid, plasma, and solid.
The different phases of matter have different properties like the arrangement of the particles in solid are very closed, liquids are loosely bonded, and gases have free-flowing. This makes solid rigid, liquids and gases free flow.
The phases of matter can be expressed in the equations in the brackets along the reactants and products. The solids are represented as (s), liquids (l), gases (g), and aqueous (aq).
Therefore, option A. none of these is the correct option.
Learn more about the phases of the matter here:
https://brainly.com/question/4058715
#SPJ5
Please help, Which molecule is shown below
Answer:
Option B. 3–methylheptane.
Explanation:
To obtain the name of the compound given in the question above, we must
1. Determine the functional group of the compound.
2. Locate the longest continuous carbon chain. This gives the parent name of the compound.
3. Identify the substituent groups attached.
4. Locate the position of the substituent group attached by giving it the lowest possible count.
5. Combine the above to obtain the name.
Now let us name the compound given in the question above.
1. The compound is an alkane since it contains only single bond.
2. The longest continuous carbon chain is 7. Hence the parent name I the compound is heptane.
3. The substituent group attached is
—CH3 i.e methyl.
4. The substituent group attached is at carbon 3.
5. Therefore, the name of the compound is:
3–methylheptane.
A soft drink contains 63 g of sugar in 378 g of H2O. What is the concentration of sugar in the soft drink in mass percent
Answer:
[tex]\% m/m= 14.3\%[/tex]
Explanation:
Hello,
In this case, the by mass percent is computed as shown below:
[tex]\% m/m=\frac{m_{solute}}{m_{solute}+m_{solvent}} *100\%[/tex]
Whereas the solute is the sugar and the solvent the water, therefore, the concentration results:
[tex]\% m/m=\frac{63g}{63g+378g} *100\%\\\\\% m/m= 14.3\%[/tex]
Best regards.
Which of the following pieces of information is given in a half-reaction?
O A. The number of electrons transferred in the reaction
B. The compounds that the atoms in the reaction came from
C. The state symbol of each compound in the reaction
D. The spectator ions that are involved in the reaction
Answer:
The number of electrons transferred in the reaction
Explanation:
Answer:
A
Explanation:
Which of the following contains a nonpolar covalent bond?
O A. Co
B. NaCl
O C. 02
O D. HE
Answer:
The answer is o2
Explanation:
I took the test
Determine whether each chemical substance would remain the same color or turn pink in the presence of phenolphthalein.
Answer:
See the answer below
Explanation:
The complete question can be seen in the attached image.
Phenolphthalein is an indicator that is often utilized in an acid-base reaction to indicate the endpoints of such reactions due to its ability to change color from pink/colorless to colorless/pink depending on if the final solution is acidic or basic.
Phenolphthalein is usually colorless in acidic solutions and appears pink in basic solutions. The more basic or alkaline a solution is, the stronger the pink color of phenolphthalein. Hence;
1. Ammonia with a pH of 11 is basic, phenolphthalein will turn pink.
2. Battery acid with a pH of 1 is acidic, it will remain colorless.
3. Lime juice with a pH of 2 is acidic, it will remain colorless.
4. Mashed avocado with a pH of 6.5 is acidic, it will remain colorless.
5. Seawater with a pH of 8.5 is basic, it will turn pink.
6. Tap water with a pH of 7 is neutral, it will remain colorless
Phenolphthalein is a chemical compound with the formula[tex]C_{20}H_{14}O_4[/tex]. Phenolphthalein is often used as an indicator in acid-base titrations. For this application, it turns colorless in acidic solutions and pink in basic solutions
Phenolphthalein works as in:-
Colorless in acidPink in baseAccording to the question, There are 5 solutions having different ph and the indication only turns basic solution to pink
The indicator only turn the basic solution pink and these solutions are as follows,
AmmoniaSea waterTap water.Hence, these are the answer.
For more information, refer to the link:-
If the theoretical yield of a reaction is 332.5 g and the percent yield for the reaction is 38 percent, what's the actual yield of product in grams? \
A. 8.74 g
B. 12616 g
C. 116.3 g
D. 126.4 g
Answer: D - 126.4g
Explanation:
% Yield = Actual Yield/Theoretical Yield
38% = Actual Yield/332.5
38/100 = Actual Yield/332.5
(.38)(332.5) = 126.35 g = 126.4 g Actual Yield
Answer:
is D. the correct answer
Explanation:
I'm not sure if it is. Please let me know if I'm mistaking.
Which of the following is most likely a heavier stable nucleus? (select all that apply) Select all that apply: A nucleus with a neutron:proton ratio of 1.05
The question is incomplete, the complete question is;
Which of the following is most likely a heavier stable nucleus? (select all that apply) Select all that apply: A nucleus with a neutron:proton ratio of 1.05 A nucleus with a A nucleus with a neutron:proton ratio of 1.49 The nucleus of Sb-123 A nucleus with a mass of 187 and an atomic number of 75
Answer:
A nucleus with a A nucleus with a neutron:proton ratio of 1.49
A nucleus with a mass of 187 and an atomic number of 75
Explanation:
The stability of a nucleus depends on the number of neutrons and protons present in the nucleus. For many low atomic number elements, the number of protons and number of neutrons are equal. This implies that the neutron/proton ratio = 1
Elements with higher atomic number tend to be more stable if they have a slight excess of neutrons as this reduces the repulsion between protons.
Generally, the belt of stability for chemical elements lie between and N/P ratio of 1 to an N/P ratio of 1.5.
Two options selected have an N/P ratio of 1.49 hence they are heavy stable elements.
Answer:
-A nucleus with a neutron:proton ratio of 1.49
-The nucleus of Sb-123
-A nucleus with a mass of 187 and an atomic number of 75
Two elements represents by the letter Q and R atomic number 9 and 12 respectively. Write the electronic configuration of R
Answer:
Atomic no = 12 = Mg
Explanation:
It is given that,
The atomic number of two elements that are represented by letter Q and R are 9 and 12.
We need to write the electronic configuration of R. Atomic number shows the number of protons in atom.
For R, atomic number = 12
Its electronic configuration is : 2,8,2
It has two valance electrons in its outermost shell. The element is Magnesium (Mg).
H2SO4 ????????????????
Explanation:
Sulfuric Acid (H2SO4) is a strong mineral acid that has is colorless when pure. This chemical is used as a chemical intermediate to manufacture other chemicals and cleaning metal surfaces. The formula for sulfuric acid is H2SO4. The molar mass of sulfuric acid is 98.07848 g mol.
g Does a reaction occur when aqueous solutions of barium hydroxide and aluminum sulfate are combined
Answer:
3BaO + Al₂(SO₄)₃ → Al₂O₃+ 3BaSO₄
Explanation:
Yes! A reactiin occurs between barium hydroxide and auminium sulphate.
barium sulfate (BaSO4) and aluminum hydroxide (Al(OH)3) are the products obtained in this reaction.
The reaction is given by the equation below;
3BaO + Al₂(SO₄)₃ → Al₂O₃+ 3BaSO₄
What makes it possible
for a vascular plant to
be a long distance from
a water source?
A. long leaves
B. flowers
C. long roots
D. long stems
Answer:
I think long roots
Explanation: