Answer:
[tex]Cd(s)|Cd^{2+}(aq) || Cu^{2+}(aq)|Cu(s)[/tex]
Explanation:
A galvanic cell is composed of two electrodes immersed in a suitable electrolyte and connected via a salt bridge. One of the electrodes serves as a cathode where reduction or gain of electrons takes place. The other half cell functions as an anode where oxidation or loss of electrons occurs.
The representation is given by writing the anode on left hand side followed by its ion with its molar concentration. It is followed by a salt bridge. Then the cathodic ion with its molar concentration is written and then the cathode.
As it is given that cadmium acts as anode, it must be on the left hand side and copper must be on right hand side.
[tex]Cd(s)|Cd^{2+}(aq) || Cu^{2+}(aq)|Cu(s)[/tex]
A star is observed from two positions of Earth in its orbit, in summer and winter. Which of these is the best method to calculate the approximate distance of the star from Earth? measure the parallax and use it in calculations measure the red shift of emitted light and use it in calculations use doppler effect to calculate the shift in light traveling from star to Earth in winter use doppler effect to calculate the shift in light traveling from star to Earth in summer
Answer:
measure the parallax and use it in calculations
Explanation:
got it right on test
There are many more stars at different distances from the earth. The distance to the stars calculated in light years and it is measured using parallax method.Thus option a is correct.
What is parallax method?Parallax method is used to measure the approximate distance of stars from earth. It uses the position of nearby star from two points opposite to earth and the small angular displacement observed from the remote stars are noted.
The orbit radius of earth and distance to the stars can be calculated from the parallactic angle p, that is one second of arc. Thus the distance is described in the units parsec.
The distance to the stars are usually calculated in light years. One parsec equals 3.26 light years. The nearest star to earth is named as proxima century having the distance parallax 0.76813'' which equals 4.24 light years. Thus, parallax is inversely proportional to the distance.
To find more on parallax method, refer here:
https://brainly.com/question/13046118
#SPJ2
The conversion of CICH=CHCI to CI2C=CC12 can be carried out with:
C12 / H20
C12
C12/ hv
C12 / aq. NaOH
Answer:
I think third C12/hv is right answer
Choose the correct statement
a) The maximum value of principal quantum number (n) is 7
b) The angular quantum number (l) can receive value from 1 to (n-1)
c) The magnetic quantum number (ml) shows the energy of electron
d) The magnetic quantum number (ml) show how many orbitals in each subshell
Answer:
maybe number b is correct. ...thank you
Isotopes are: A. are only theoretical. B. only formed in laboratories. C. found in nature. D. found in the nuclear reactions in stars but not on Earth.
Answer:
B. only formed in laboratories
Explanation:
i know
Isotopes are only formed in Laboratories. hence, Option (B) is correct.
What are Isotopes ?
Each of two or more forms of the same element that contain equal numbers of protons but different numbers of neutrons in their nuclei, and hence differ in relative atomic mass but not in chemical properties; in particular, a radioactive form of an element is known as Isotope.
Isotopes are two or more types of atoms that have the same atomic number and position in the periodic table, and that differ in nucleon numbers due to different numbers of neutrons in their nuclei.
Therefore, Isotopes are only formed in Laboratories. hence, Option (B) is correct.
Learn more about Isotopes here ;
https://brainly.com/question/12955625
#SPJ2
Explain the general properties of aqueous solution based on the following support your answer with examples for each case
1. Electrolytes versus non-electrolyte
2. Precipitation reaction
3. Solubility
An aqueous solution, based on its name, is a water based solution, such that the solvent is water. In such solution, ionic compounds when dissolved, tend to dissociate into the constituent ions, for example, sodium chloride, NaCl forms an aqueous solution of sodium, Na⁺ and chloride, Cl⁻
1) Therefore, aqueous solutions are good electrolyte when ionic, and are therefore, good electrolytes which conduct electricity compared to solids that form non-electrolyte
2) A precipitation reaction is the insoluble product formed by the combination of cations and anions to form ionic solids that are insoluble
3) Aqueous solutions are made with substance that are soluble in water
Learn more about aqueous solution here;
https://brainly.com/question/19587902
c6h5-c=o-ch3 + br2/oh
Explanation:
here's the molecule you were looking for
What is the H+ ion concentration of a solution with a pH of 7?
answer=H+]=10-7
explain=the same way, a solution with a pH of 5 contains 10-5mol/l of hydrogen ions, a solution with a pH of 6 contains 10-6mol/l of hydrogen ions, while the solution with a pH of 7 contains 10-7mol/l of hydrogen ions
Below is the structure of what should be the peptide Thr-Glu-Arg-Met. However, one of these residues has been drawn incorrectly. Identify this residue
Thr
Glu
Arg
Met
Answer:
the answer is glu and I know
The residue that has been drawn incorrectly is option (B) i.e. glu .
What is glutamate residue?Glutathione consists of a glutamate residue linked to cysteine via its γ-carboxyl rather than the α-carboxyl group and followed by a conventional peptide bond between cysteine and glycine.
It plays an important role in maintaining the proper ratio of oxidized to reduced forms of metabolically important thiols such as coenzyme A.
It also provides reducing equivalents that detoxify reactive oxygen species such as peroxides.
The tripeptide is regenerated through the concerted action enzymes in the so-called γ-glutamyl cycle.
The residue that has been drawn incorrectly is glutamate residue ,hence option (B) is correct.
Learn more about glutamate residue ,here:
https://brainly.com/question/13873550
#SPJ2
The condition that a reaction takes place without outside help Choose... Solution in which no more solute can be dissolved in the solvent Choose... Difference of the enthalpy (of a system) minus the product of the entropy and absolute temperature Choose... The extent of randomness in a system Choose... Sum of the internal energy plus the product of the pressure and volume for a reaction
Answer:
Difference of the enthalpy (of a system) minus the product of the entropy and absolute temperature
Explanation:
The basis of spontaneity in a chemical reaction is that ∆G must be negative. ¡∆G is known as the change in free energy of a system. If ∆G is negative, then the reaction will occur without any external help (the reaction is spontaneous at room temperature).
∆G is given by;
∆G= ∆H -T∆S
Where;
∆H= change in enthalpy of the system
T= absolute temperature of the system
∆S= change in entropy
Hence; when ∆H -T∆S gives a negative result, the reaction proceeds without any external help.
A small object has a mass of 68.1 grams. When completely immersed in a graduated cylinder with a water level of 25.0mL the object causes the water level to rise to 43.3mL. What is the density of the object in g/mL?
Answer:
3.72
Explanation:
First you need the volume.
Final level = 43.3
Initial level = 25.0
Change in volume =18.3
So the density = mass / volume
mass = 68.1
vol = 18.3
density = 68.1 / 18.3
density = 3.72
Answer:
[tex]\boxed {\boxed {\sf 3.72 \ g/mL}}[/tex]
Explanation:
We are asked to find the density of a small object. Density is calculated using the following formula.
[tex]\rho= \frac{m}{v}[/tex]
The mass of the object is 68.1 grams.
The volume was found using water displacement. A known quantity of water was measured out (25.0 mL), then the object was added. The new water level was recorded (43.3 mL). The volume is the difference between the two water levels.
volume = final water level - initial water level volume = 43.3 mL - 25 mL = 18.3 mLNow we know the mass and the volume, so we can substitute the values into the formula.
[tex]\rho= \frac{ 68.1 \ g }{18.3 \ mL}[/tex]
[tex]\rho = 3.721311475 \ g/mL[/tex]
The original measurements of mass and water levels have 3 significant figures, so our answer must have the same. For the number we found, that is the hundredth place. The 1 in the thousandth place tells us to leave the 2 in the hundredth place.
[tex]\rho \approx 3.72 \ g/mL[/tex]
The density of the small object is approximately 3.72 grams per milliliter.
A sample of ice absorbs 15.6kJ of heat as it undergoes a reversible phase transition to form liquid water at 0∘C. What is the entropy change for this process in units of JK? Report your answer to three significant figures. Use −273.15∘C for absolute zero.
Answer:
Entropy change of ice changing to water at 0°C is equal to 57.1 J/K
Explanation:
When a substance undergoes a phase change, it occurs at constant temperature.
The entropy change Δs, is given by the formula below;
Δs = q/T
where q is the quantity of heat absorbed or evolved in Joules and T is temperature in Kelvin at which the phase change occur
From the given data, T = 0°C = 273.15 K, q = 15.6 KJ = 15600 J
Δs = 15600 J / 273.15 K
Δs = 57.111 J/K
Therefore, entropy change of ice changing to water at 0°C is equal to 57.1 J/K
The entropy change of ice changing to water will be "57.1 J/K".
Entropy changeThe shift in what seems like a thermodynamic system's condition of confusion is caused by the transformation of heat as well as enthalpy towards activity. Entropy seems to be greater mostly in a network with a high quantity or measure of chaos.
According to the question,
Temperature, T = 0°C or,
= 273.15 K
Heat, q = 15.6 KJ or,
= 15600 J
We know the formula,
Entropy change, Δs = [tex]\frac{q}{T}[/tex]
By substituting the values, we get
= [tex]\frac{15600}{273.15}[/tex]
= 57.11 J/K
Thus the above answer is correct.
Find out more information about Entropy change here:
https://brainly.com/question/6364271
1. For the following reaction, 4.86 g of magnesium nitride are mixed with excess water. The reaction yields 7.18 g of magnesium hydroxide.
magnesium nitride(s) + water(1) –> magnesium hydroxide (aq) + ammonia (aq)
What is the ideal yield of magnesium hydroxide?
What is the percent yield for this reaction?
2. For the following reaction, 6.41 g of hydrogen gas are mixed with excess nitrogen gas. The reaction yields 26.2 g of ammonia.
nitrogen(g) + hydrogen(g) –> ammonia(g)
What is the ideal yield of ammonia?
What is the percent yield for this reaction?
3. For the following reaction, 3.79 g of water are mixed with excess chlorine gas. The reaction yields 8.70 g of hydrochloric acid.
chlorine(g) + water(1) –> hydrochloric acid(aq) + chloric acid (HCIO3)(aq)
What is the ideal yield of hydrochloric acid?
What is the percent yield for this reaction?
Answer:
See explanation
Explanation:
1)
Mg3N2(s) + 6H2O(l) ------------> 3Mg(OH)2 + 2NH3(g)
Number of moles of magnesium nitride= mass/molar mass= 4.86g/100.9494 g/mol = 0.048 moles
1 mole of magnesium nitride yields 3 moles of magnesium hydroxide
0.048 moles of magnesium nitride yields 0.048 moles × 3= 0.144 moles of magnesium hydroxide
Theoretical yield of magnesium hydroxide = 0.144 moles × 58.3197 g/mol = 8.398 g
Percent yield= actual yield/ theoretical yield × 100
Percent yield= 7.18/8.398 × 100/1 = 85.5%
2)
N2(g) + 3H2(g) -------> 2NH3(g)
Number of moles of hydrogen gas = mass/ molar mass = 6.41g/ 2gmol-1 = 3.205 moles of hydrogen gas.
From the balanced reaction equation;
3 moles of hydrogen gas yields 2 moles of ammonia
3.205 moles of hydrogen gas yields 3.205 × 2/3 = 2.1367 moles of ammonia
Theoretical yield of ammonia = 2.1367 moles × 17 gmol-1 = 36.3 g
Percent yield = actual yield/ theoretical yield ×100
Percent yield = 26.2/36.3 ×100
Percent yield = 72.2%
3)
3Cl2(g) + 3H2O(l) ------> HOCl3(aq) + 5HCl(aq)
Number of moles of water= mass/ molar mass = 3.79g/18 gmol-1 = 0.21 moles
Since
3 mole of water yields 5 mole of HCl
0.21 moles of water yields 0.21 × 5/3 = 0.35 moles of HCl
Theoretical yield of HCl = 0.35 moles × 36.5 gmol-1 = 12.775 g
Percent yield = actual yield/ theoretical yield × 100/1
Percent yield = 8.70/12.775 ×100
Percent yield = 68.1%
11. How many oxygen atoms are there in one formula unit of Ca2+?
Answer:
NO3 has 3 atoms of oxygen in it per molecule (indicated by the subscript of 3) and (NO3)2 means you have 2 NO3 molecules, meaning you double the subscript to get 6 oxygen atoms
o prepare vegetables for finishing by grilling, sautéing, pan frying, deep frying, or stewing, you should _______ them to cook them to partial doneness
Answer:
To prepare vegetables for finishing by grilling, sautéing, pan frying, deep frying, or stewing, you should parboil them to cook them to partial doneness.
Which of the following processes is spontaneous? Select the correct answer below:
a. carbon graphite turning to carbon diamond at normal pressure
b. carbon diamond turning to carbon graphite at normal pressure
c. carbon diamond turning to carbon graphite at high pressure
d. none of the above
Answer:
b. carbon diamond turning to carbon graphite at normal pressure.
Explanation:
Graphite is the stable form of the carbon element under normal ambient pressure. The process of conversion of carbon diamond to carbon graphite is a spontaneous process under typical ambient conditions, since diamonds are said to be thermodynamically unstable but kinetically stable under ambient conditions, and the process of conversion can take place without a continuous input of energy from an external source.
By December 31, 2003, concerns over arsenic contamination had prompted the manufacturers of pressure-treated lumber to voluntarily cease producing lumber treated with CCA (chromated copper arsenate) for residential use. CCA-treated lumber has a light greenish color and was widely used to build decks, sand boxes, and playground structures.
Required:
Draw the Lewis structure of the arsenate ion (ASO4^3-) that yields the most favorable formal charges.
Answer:
Explanation:
lewis structure can be defined as a process of how the valence shell electrons of a molecule is being arranged, the pattern of it arrangement and the relationship between the bonding atoms and the lone pairs present in the molecule.
In order to draw the Lewis structure for Arsenate ion [tex]\mathsf{AsO \ _4^{3-}}[/tex], first thing is to count the valence electrons in the molecule. Once we determine the valence electrons, then we distribute them around the central atom. The Arsenate ion structure is tetrahedral in nature with a bond angle of 109.5° and it is sp³ hybridized.
The formula of complex ion formed when aluminum hydroxide dissolves in sodium hydroxide will be: Select the correct answer below: [AlOH]2+
Answer:
Al(OH)₃ + OH⁻ → Al(OH)₄⁻
The compound is called hydroxoaluminate.
Explanation:
Aluminiun Hydroxide → Al(OH)₃
NaOH → Sodium hydroxide.
The Al(OH)₃ is an amphoteric compound, while the NaOH is a strong base. When they react, we may think that, fist of all, the base can dissociate: NaOH → Na⁺ + OH⁻
So the Al(OH)₃ will be a Lewis acid, as it can donate a pair of e⁻
Al(OH)₃ + OH⁻ → Al(OH)₄⁻
Without doing any calculations, determine the sign of ΔSsys for each of the following chemical reactions. Drag the appropriate items to their respective bins.
1. 2H30' (aq) + CO23- (aq) - CO2(g) +3H2O(1)
2. CH4(g) + 202,(g) - CO2(g) + 2H2O(l)
3. Mg (s) + Cl2(g) - MgCǐ2(s)
4. SO3(g) + H2O(I) - H2SO4(I)
A. ΔSsys greater than
B. ΔSsys smaller than
Answer:
Answers are in the explanation.
Explanation:
In a chemical reaction we can determine the sign of ΔSsys based on the states of products and reactants knowing that:
Entropy of gases >>> entropy of liquid > entropy of solids.
The entropy of solids is lower than entropy of liquids that is lower than entropy of gases.
In the reactions:
1. 2H₃O⁺(aq) + CO₃²⁻(aq) → CO₂(g) +3H₂O(l)
As 1 gas is produced, entropy of products is higher than entropy of reactants. That means ΔSsys > 0 (That because ΔSsys is ΔSProducts - ΔSReactants)
2. CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(l)
3 moles of gas are converted in 1 mole of gas in products. Entropy of reactants is higher than entropy of products, ΔSsys < 0.
3. Mg(s) + Cl₂(g) → MgCǐ₂(s)
You have 1 mole of gas in reactants and 1 mole of solid in products. ΔSProducts <<< ΔSReactants. ΔSsys < 0.
4. SO₃(g) + H₂O(I) → H₂SO₄(I)
1 mole of gas in reactants, a liquid in products. ΔSProducts <<< ΔSReactants. ΔSsys < 0.
Determining the sign of ΔSsys for each given chemical reaction, the following can be obtained without calculations:
1. ΔSsys > 0.
2. ΔSsys < 0
3. ΔSsys < 0
4. ΔSsys < 0
Recall:
The states of the reactants and the products in a chemical reaction determines the sign of ΔSsys of the reaction.The entropy of gasses is greater than the entropy of liquid and solids.The entropy of solids is less than the entropy of liquid and gasses.Gasses have the highest entropy, while solids have the least.Thus:
In the first chemical reaction, 1 mole of gas is produced, therefore: ΔSsys > 0.
In the second chemical reaction, 3 moles of gasses gives a products of 1 mole of gas, therefore: ΔSsys < 0.
In the third chemical reaction, 1 mole of gas gives 1 mole of solid as product, therefore: ΔSsys < 0.
In the fourth chemical reaction, 1 mole of gas gives 1 mole of liquid as product, therefore: ΔSsys < 0.
Learn more here:
https://brainly.com/question/1218700
Please help, Which type of molecule is shown below?
Answer:
Carbohydrate
Explanation:
A.pex
For which of the following elements (in their normal, stable, forms) would it be correct to describe the bonding as involving "a sea of electrons"?
a. hydrogen
b. nellum
c. sulfur
d. Iodine
e. Ethium
Answer:
e. Lithium
Explanation:
Correct list of options!
a. hydrogen b. Helium c. sulfur d. Iodine e. Lithium
Sea of electrons generally refers to metal atoms. This is because of the delocalized nature of the electrons compared to non metals where the electrons are localized (fixed to a specific atoms).
Among all the elements in the options, the metal is option e. Lithium
At a constant temperature, a sample of gas occupies 1.5 L at a pressure of 2.8 ATM. What will be the pressure of this sample, in atmospheres, if the new volume is 0.92 L?
Using boyles law
[tex]\boxed{\sf v\propto \dfrac{1}{p}}[/tex]
[tex]\\ \sf\longmapsto P_1V_1=P_2V_2[/tex]
[tex]\\ \sf\longmapsto P_2=\dfrac{P_1V_1}{V_2}[/tex]
[tex]\\ \sf\longmapsto P_2=\dfrac{2.8\times 1.5}{0.92}[/tex]
[tex]\\ \sf\longmapsto P_2=\dfrac{4.2}{0.92}[/tex]
[tex]\\ \sf\longmapsto P_2=4.56atm[/tex]
[tex]\\ \sf\longmapsto P_2\approx 4.6atm[/tex]
Answer:
[tex]\boxed {\boxed {\sf 4.6 \ atm}}[/tex]
Explanation:
We are asked to find the new pressure given a change in volume. We will use Boyle's Law, which states the volume of a gas is inversely proportional to the pressure. The formula for this law is:
[tex]P_1V_1= P_2V_2[/tex]
Initially, the gas occupies 1.5 liters at a pressure of 2.8 atmospheres.
[tex]1.5 \ L * 2.8 \ atm = P_2V_2[/tex]
The volume is changed to 0.92 liters, but the pressure is unknown.
[tex]1.5 \ L * 2.8 \ atm = P_2* 0.92 \ L[/tex]
We are solving for the final pressure, so we must isolate the variable P₂. It is being multiplied by 0.92 liters. The inverse operation of multiplication is division, so we divide both sides by 0.92 L.
[tex]\frac {1.5 \ L * 2.8 \ atm}{0.92 \ L} = \frac{P_2* 0.92 \ L}{0.92 \ L}[/tex]
[tex]\frac {1.5 \ L * 2.8 \ atm}{0.92 \ L}= P_2[/tex]
The units of liters cancel each other out.
[tex]\frac {1.5 * 2.8 \ atm}{0.92 }=P_2[/tex]
[tex]\frac {4.2}{0.92} \ atm= P_2[/tex]
[tex]4.565217391 \ atm = P_2[/tex]
The original measurements of pressure and volume have 2 significant figures, so our answer must have the same. For the number we calculated, that is the tenths place. The 6 in the hundredth place tells us to round the 5 up to a 6.
[tex]4.6 \ atm \approx P_2[/tex]
The pressure is approximately 4.6 atmospheres.
A sample of a hydrocarbon is found to contain 7.99g carbon and 2.01g hydrogen. What is the empirical formula for this compound
Answer:
The empirical formulae for the compound is CH3.
Write down the molecular formula and molecular weight of carbon dioxide .
Answer:
CO2
Molar mass: 44.01 g/mol
Explanation:
CO2
why Ethyl amine is more basic than aniline?
Answer:
Because a Lone pair of electrons on nitrogen is involved in delocalization.
Hope this helps you ( ◕ᴗ◕✿)
If it doesn't i'm sorry(◞ ‸ ◟)
Explanation:
In ethylamine ethyl is electron donating group. So more electrons are available aroudn nitrogen for donation. But in aniline phenyl group is electron attracting group.
The rate constant for the decay of a radioactive element is 3.68 × 10⁻³ day⁻¹. What is the half-life of this element?
Answer:
half life=0.693/rate constant =188.3
The half-life of this element is 188.32 years
The formula for calculating the half-life of an element is expressed according to the equation:
[tex]t_{1/2}=\frac{ln 2}{\lambda}[/tex]
[tex]\lambda[/tex] is the decay constantt1/2 is the half-lifeGiven the following parameters:
The rate constant for the decay = 3.68 × 10⁻³ day⁻¹.
Substitute into the formula for calculating the half-life as shown:
[tex]3.68\times 10^{-3}=\frac{0.693}{\lambda}\\ 0.00368=\frac{0.693}{\lambda}\\\lambda=\frac{0.693}{0.00368}\\\lambda = 188.32 years[/tex]
Hence the half-life of this element is 188.32 years
Learn more on half-life here: https://brainly.com/question/23438944
It would require ? Liters of water to dissolve 36 grams of the substance.
The correct answer is 3 liters
Explanation:
If a substance has a solubility of [tex]12 \frac{grams}{liter}[/tex], this means in 1 liter, the grams that can be dissolved are 12 grams. Now, considering Justin and Ellie need to dissolve 36 grams to calculate the number of liters just divide the total of grams into 12 as each liter dissolves only 12 grams. The process is shown below:
36 grams (the amount that will be dissolved) ÷ 12 (grames dissolved per liter) = 3 liters (liters to dissolved 36 grams)
Answer:
It would be 3 liters
Explanation:
11mg of cyanide per kilogram of body weight is lethal for 50% of domestic chickens. How many grams per kilogram of body weight is a lethal dose for 50% of domestic chickens?
Answer:
[tex]0.033g[/tex]
Explanation:
Hello,
In this case, since 11 mg per kilogram of body weight has the given lethality, the mg that turn out lethal for a chicken weighting 3 kg is computed by using a rule of three:
[tex]11mg\longrightarrow 1kg\\\\x\ \ \ \ \ \ \longrightarrow 3kg[/tex]
Thus, we obtain:
[tex]x=\frac{3kg*11mg}{1kg}\\ \\x=33mg[/tex]
That in grams is:
[tex]=33mg*\frac{1g}{1000mg} \\\\=0.033g[/tex]
Regards.
Consider the reaction: NaNO3(s) + H2SO4(l) NaHSO4(s) + HNO3(g) ΔH° = 21.2 kJ
How much heat must absorbed by the reaction system to convert 100g of NaNO3 into NaHSO4(s)?
Please anyone help me out
Data obtained from the question
NaNO₃ + H₂SO₄ —> NaHSO₄(s) + HNO₃ ΔH° = 21.2 KJ
Heat absorbed by converting 100 g of NaNO₃ =? Step 2Determination of the mass of NaNO₃ that was converted from the balanced equation.
Molar mass of NaNO₃ = 23 + 14 + (16×3)
= 23 + 14 + 48
= 85 g/mol
Mass of NaNO₃ from the balanced equation = 1 × 85 = 85 g
Thus, 85 g of NaNO₃ were converted from the balanced equation.
Step 3Determination of the heat absorbed by converting 100 g of NaNO₃.
From the balanced equation above,
When 85 g of NaNO₃ were converted, 21.2 KJ were absorbed by the system.
Thus, the conversion of 100 g of NaNO₃ will cause the system to absorb = [tex]\frac{100 * 21.2}{85} =[/tex] 24.9 KJ of heat energy.
Therefore, the system will absorb 24.9 KJ of heat energy.
Learn more: https://brainly.com/question/13728390
Name the following alkane molecule:
CH3
|
CH3CHCH2CHCH2CHCH3
CH
CH2CH2CH3
A. 2,4,6-trimethylheptane
B. 4-ethyl-2,6-dimethylheptane
C. 2,6-dimethyl-4-propylheptane
Answer:
2,6dimethyle-4-propylheptane
I guess!
The correct name of the compound is 4-ethyl-2,6-dimethylheptane.
What is IUPAC nomenclature?The IUPAC nomenclature shows the correct way to name a compound this rule is established by the International Union of Pure and Applied Chemistry.
Looking at the structure of the compound as shown, the correct name of the compound is 4-ethyl-2,6-dimethylheptane.
Learn more about IUPAC nomenclature: https://brainly.com/question/14356798
The surface of silver metal, Ag(s), became tarnished when it was exposed to oxygen, producing Ag2O. In Ag2O, the oxidation state of silver is 1. According to this information, silver metal was _____. Please choose the correct answer from the following choices, and then select the submit answer button. Answer choices reduced
Answer: The silver metal was OXIDIZED.
Explanation:
OXIDATION is defined as loss of electrons and increase in oxidation number of an atom.
Oxidation number is the charge on an ion in an ionic compound or the charge that an atom in a covalent compound would have it it were ionic. There are basic rules governing oxidation number, they include:
--> the oxidation number of elements in their free states is ZERO. Example O2, Cl2,Na, Al, Ag.
-->The oxidation number for an ion is the same as the size and sign of the charge on the ion. For example the oxidation number of Zn2+ is +2.
--> the sum of all the oxidation numbers of the elements in a compound is zero.
--> oxidation numbers are always written with either a positive or a negative sign.
On the other hand, reduction is the opposite of oxidation. As oxidation is taking place, reduction is also taking place. Reduction involves:
--> Gain of electron and
--> decrease in oxidation number
From the question, the silver metal had ZERO as it's oxidation number because it's in free state. After being exposed to oxygen to form silver oxide, the oxidation number became +1.
Since there is an increase in the oxidation number, the silver metal was OXIDIZED