Answers
Answer:
Vertical velocity = 8.28 m/s
Horizontal velocity = 28.3 m/s
__________________________________________________________
We are Given:
Initial velocity of the ball = 40 m/s
Angle of elevation of the ball = 45°
Time interval = 2 seconds
__________________________________________________________
Vertical and Horizontal Components:
Vertical Component:
The vertical component of the ball can also be written as:
40*Sin(45°)
40*(1/√2) [since Sin(45°) = 1/√2]
40/√2 m/s
Horizontal Component:
The horizontal component of the ball can also be written as:
40*Cos(45°)
40*(1/√2) [Since Cos(45°) = 1/√2]
40/√2 m/s
__________________________________________________________
Speed of the Ball after 2 seconds:
Horizontal Velocity:
Since the horizontal velocity is not affected by any force during the flight, the horizontal velocity after 2 seconds will also be 40/√2 m/s
Since √2 = 1.41:
Horizontal velocity = 28.3 m/s
Vertical Velocity:
v = u + at [First equation of motion]
v = 40/√2 + (-10)(2)
[g is negative because it is acting against the direction of motion]
v = 40/√2 - 20
v = [tex]\frac{40-20\sqrt{2} }{\sqrt{2} }[/tex] [taking the LCM]
v = 8.28 m/s [√2 = 1.41]
Related Questions
what energy transfer will a stretched rubber band have when let go
Answers
Answer:
when the rubber band is realeased the potential energy is quickly converted to kinetic energy this is equal to one mass of the the rubber band multiplied by its velocity( in meters per second)
Which statement correctly describes the diferences between positive and negative acceleration
O Positive acceleration describes a change in speed, negative acceleration desxibes no change in speed,
Positive acceleration describes no change in speed, negative acceleration desibes a change in speed,
Positive acceleration describes an increase in speed, negative sexeleration desnibes a decrease in speed
O Positive acceleration describes a decrease in speed, negative sideration describes an increase in sarees
Answers
Answer:The answer is this Positive acceleration describes an increase in speed, negative sexeleration desnibes a decrease in speed
Explanation:
When are zeros significant when found in front of (to the left) of the decimal point?
Answers
Answer:
If a zero is found between important digits, it is important. Zeros are also used as (not salient) holders to the left of digits if the number is in fact a decimal. Example from www.rpi.edu: , a mass of 42 g has two significant digits. Expressed in kilograms, the mass of 0.042kg should still have two significant digits.
Explanation:
Zeros are also used as (not salient) holders to the left of digits if the number is in fact a decimal. Example from www.rpi.edu: "A mass of 42 g has two significant digits. Expressed in kilograms, the mass of 0.042kg should still have two significant digits."
Hope this comes in handy, have a great day!
1. A person weighs 155 lbs and is walking 3.1 miles per hour. How much kinetic energy does the person have? (Keep in mind, 1 kg is 2.2 lb, and 1 m/s is 2.24 mi/h.)2. What is the kinetic energy of a 5 g bullet travelling 400 m/s?
3. Is it possible to have a negative KE? Why or why not?
Answers
Answer:
Explanation:
Kinetic energy is expressed as;
KE =1/2 mv²
M is the mass
v is the velocity of the object
1) Given
Mass = 155lb
Velocity = 3.1mi/hr
Since 1kg = 2.2lb
x = 155lb
x= 155/2.2
x = 70.45kg
Also
1m/s = 2.24mi/hr
y = 3.1mi/hr
y = 3.1/2.24
y = 1.384m/s
KE = 1/2(70.45)(1.384)²
KE = 0.9577×70.45
KE = 67.47Joules
2) M = 5g =0.005kg
V = 400m/s
KE = 1/2(0.005)400²
KE = 80000×0.005
KE = 400Joules
3} Since a body decelerates (negative acceleration) this mean that the velocity of a body can be a negative value showing that it is possible for a moving body to possess negative kinetic energy.
Some examples from everyday life of thermal radiators include:______.A. Humans.B. The Sun.C. Incandescent light bulbs.D. Lasers.E. Accelerating electrons.
Answers
Answer: A. Humans B. The sun C. Incandescent light bulbs
Explanation:
Thermal radiators are simply referred to as the heat exchangers that are designed in order to transfer thermal energy from one particular place to another.
Some examples from everyday life of thermal radiators include humans, the Sun and incandescent light bulbs. All these help in transfer of hear from one medium to another medium
A 300 g object attached to a horizontal spring moves in simple harmonic motion with a period of 0.340 s. The total mechanical energy of the spring–object system is 3.00 J.
(a) What is the spring constant (in N/m)?
(b) What is the amplitude (in m) of the motion?
(c) What is the percentage change in amplitude of motion if the total energy of the system is increased to 5.00 J?
Answers
Answer:
Explanation:
angular velocity ω = 2π / T where T is time period of rotation .
= 2 x 3.14 / .34 = 18.47 rad /s
Total mechanical energy = 1/2 m ω²Α² where A is amplitude .
spring constant = k
[tex]\omega=\sqrt{\frac{k}{m} }[/tex]
m is mass
[tex]\omega^2=\frac{k}{m} }[/tex]
18.47² = k / .3
k = 102.34 N /m
b )
energy = 1/2 m ω²Α²
3 = .5 x 18.47² x A²
A² = .01759
A = .1326
13.26 cm .
c )
If energy becomes 5 J
5 = .5 x 18.47² x A²
A² = .0293
A = .1711
= 17.11 cm
percent increase
= (17.11 - 13.26 )x100 / 13.26
= 29%
Which is NOT a property of the organisms that have become useful index fossils
Answers
Answer: I dont understand
Explanation:
A heavy bank-vault door is opened by the application of a force of 300 N directed perpendicular to the plane of the door at a distance of 0.80 m from the hinges. What is the torque?
Question 4 options:
1.) 120 Nm
2.) 240 Nm
3.) 375 Nm
4.) 300 Nm
Answers
Answer:
240Nm
Explanation:
Given parameters:
Force on the bank vault = 300N
Distance to the plane of the vault = 0.8m
Unknown:
Torque = ?
Solution:
Torque is the component of force that causes an object to rotate about an axis;
Torque = Fr x sinФ
Here Ф = 90°
r = distance
Torque = 300 x 0.8 x Sin 90°
Torque = 240Nm
Someone help me please it’s urgent
Answers
Can you help me with this question please
Answers
Answer:
9.6 Ω
Explanation:
Notice that this circuit is the same as the one shown in the attached image.
Then we calculate the parallel of R1 and R3 first:
Since R1 = 30 Ω and R2 = 20 Ω, the parallel equivalent of this is 12 Ω and this in series with R5 (4 Ω) is 16 Ω.
Now we calculate the parallel circuit of the three resistors
40 Ω, 60 Ω, and 16 Ω, which gives us: 9.6 Ω
Which direction of motion is affected by gravity?
Answers
Answer:
Gravity can also cause an object that is thrown into the air to change its upward motion, slow down, and fall back toward Earth's surface. The pull of Earth's gravity keeps the Moon in orbit; the moon is constantly changing direction because of gravity.
The gravitational field or gravitational potential has no direction; it's just a value that varies from place to place and over time.
Explanation:
A jogger runs 4 km in 0.4 hr, then 8 km in 0.8 hr. What is the average speed of the jogger?
Answers
The jogger would have ran about 10 km/h.
Q17: The coefficient of linear expansion of steel is a = 11 x 10-6 / °C. A steel
ball has a volume of exactly 100 cm3 at 0°C. When heated to 100°C, its
volume becomes in (cm3):
A
B
D
E
100.33
100.11
100.0011
100.0033
None of them
Answers
Solution:
The coefficient of volume expansion
p = ΔV/V1Δt
3a = V2-V1/V1Δt
Given
a = = 11 x 10-6 / °C
V2 is the final volume
V1 is the initial volume = 100cm³
Δt = 100-0 = 100°C
Substitute
3(11 x 10-6) = V2-100/100(100)
33*10^-6 * 10000 = V2-100
33*10^-2 = V2-100
V2 = 100 + 0.33
V2 = 100.33
Hence the new volume is 100.33cm³
Is a compound considered a pure substance?
Answers
Answer:
It depends on which compound you use carbon dioxide can be while helium will not but if you where to sum it up it would be use because simply most compounds are considered pure substance.
Explanation:
Left Force
150N
50N Right Force
Calculate the net force acting on the object. Show your work and be sure to
clude the correct unit.
Answers
Answer:
100 N to the left
Explanation:
Left force:150 N
Right force:50 N
So 150 - 50 = 100 N
Since the left force is greater, the resultant force is to the left
Imagine that you drop an object of 10 kg, how much will be the acceleration and
how much force causes the acceleration?
Answers
If you do this on Earth, then the acceleration of the falling object is 9.8 m/s^2 ... NO MATTER what it's mass is.
If its mass is 10 kg, then the force pulling it down is 98.1 Newtons. Most people call that the object's "weight".
A pendulum is transported from sea-level, where the acceleration due to gravity g is 9.80 m/s2, to the bottom of Death Valley. At this location, the period of the pendulum is decreased by 3.00%. What is the value of g in Death Valley
Answers
Answer: the value of g in Death Valley is 10.417 m/s²
Explanation:
Given that;
acceleration due to gravity at the point is g = 9.8 m/s²
Lets say the acceleration due to gravity at the bottom of Death valley is g'
as the period of the pendulum is decreased by 3.00%
T' = 0.97 T
T is the period of the pendulum at sea level and T' is the period of the pendulum at bottom of Death valley
therefore from the relation
T = 2π√(l/g)
g'/g = T²/T'²
g' = (T²/ (0.97T)²)g
g' = 1.063g
g' = 10.417 m/s²
therefore the value of g in Death Valley is 10.417 m/s²
In an experiment, a research collected the following informationabout a solution made from a certain
food. What can we conclude about the food?
• pH = 3.0
• Taste = Sour
A. Acid
B. Base
C. Neutral
D. Salt
Answers
Answer:
salt
Explanation:
Rocks that do not allow water to pass through them are said to be impermeable. True or false?
Answers
Answer:
true plz mark me as the brainliest
Explanation:
Answer:
TrueSome rocks have pores in them, which are empty spaces. If these pores are linked then fluid can flow through the rock.However,if the pores are not linked,then no liquid can flow through the rocksWhen pores are not linked,the rock is permiable.n
Which of these is a base?
HNO3
vinegar
ammonia
HCl
Answers
The correct answer is Ammonia
At what condition does a body becomes weightless at the equator?
Answers
Answer:
The decrease is due to the bulge at the equator (putting more distance between the rest of the planet and the surface
Explanation:
4). A basketball player shoots the ball in the air. It moves through the air
at 20 m/s and travels 25m. How long was the ball in the air? *
Answers
Let's start from this equation:
s = vt + s0
Know what it is? Of course you do. It's the equation used for knowing the position of an object in a certain period of time t.
s is space, v is speed, t is time, s0 is the initial space.
In this case the initial space is equal to 0 so our equation will become:
s = vt
Let's find t:
t = s/v
So:
t = 25m/20m/s = 1,25 s
---
Hope it was helpful. Have a great day!
What is the mechanical advantage of a nail puller where you exert a force 45 cm from the pivot and the nail is 1.8 cm on the other side? What minimum force must you exert to apply a force of 1250 N to the nail?
Answers
Answer:
Explanation:
Mechanical Advantage is the ratio of the distance of the input load (Li)from the pivot to the output load applied to the pivot(Lo)
MA = Li/Le
Given;
Li = 45cm
Lo = 1.8cm
MA = 45/1.8
MA = 25
Hence the mechanical advantage is 25
Also MA is expressed in terms of the force ratio which is the ratio of the Load to the effort applied.
MA = Load/Effort
Given
Load = 1250N
MA = 25
Effort = ?
Substitute
25 = 1250/Effort
Effort = 1250/25
Effort = 50N
Hence the minimum force exerted on the load is 50N
it is not uncommon for us to hold stereotypes toward people. The main advantage of forming a stereotype is that it______. The main disadvantage is that it_____.
Answers
Answer:
It is not a me mental shortcut
Explanation:
Can be changed easily
It is not uncommon for us to hold stereotypes toward people. The main advantage of forming a stereotype is that they make fast and quick decision. The main disadvantage is that they make generalized decision.
Who is a stereotype person?A stereotype is a persistent, vastly oversimplified view about a particular group or category possesses. A stereotype person make his own belief for the peoples.
A stereotype has the advantage of allowing us to respond quickly to events, since we may have had a similar experience before.
One negative is that it causes us to overlook individual distinctions, leading us to believe things about others that are not always true.
It is not uncommon for us to hold stereotypes toward people. The main advantage of forming a stereotype is that they make fast and quick decision. The main disadvantage is that they make generalized decision
The correct option for the blanks are make fast and quick decision and generalized decision.
To learn more about the stereotype, refer to the link;
https://brainly.com/question/13281670
#SPJ2
Please answer ASAP, and please don't joke around and actually do answer my question. I will give you brainliest if you answer it well:
A girl, standing on a bridge, throws a stone vertically downward with an initial velocity of 12.0 m/s, into the river below. If the stone hits the water 2.50 seconds later, what is the height of the bridge above the water?
Remember to identify all your data, write the equation, and show your work.
Answers
Answer:
30 feet
Explanation:
First off, if they are throwing at 12.0 m/s and it takes 2.5 seconds. It will be the act of multiplication.
12 times 2.5 is 30, because 12 times 2 is 24 plus 12 divided by 2 which is 6 so 24 plus 6 is 30.
If it takes 820 Joules of heat to warm a sample of zinc from 0°C to 50°C, what would be the mass of the zinc? Note: Zinc has a specific heat of 380 J/kg °C.
Answers
Answer:
m = 43.1 g
Explanation:
Given that,
Heat to warm the sample, Q = 820 J
Initial temperature = 0°C
Final temperature = 50°C
The specific heat of zinc is, c = 380 J/kg °C
We need to find the mass of the zinc. The specific heat in terms of mass and temperature is calculated by the relation as follows :
[tex]Q=mc\Delta T\\\\m=\dfrac{Q}{c\Delta T}\\\\=\dfrac{820}{380\times (50-0)}\\\\=0.0431\ kg\\\\=43.1\ g[/tex]
So, the mass of the sample is 43.1 g.
Answer:
43.1 g
Explanation:
A student builds an electromagnet using a battery, an iron nail, and some insulated wire. The wire is wrapped around the nail 50 times, then connected to the
battery. What changes could the student make to increase the strength of the electromagnet?
1. wrap more wire around the nail
2. increase the voltage of the battery
3. use a switch to turn the electromagnetic on and off
4. increase the size of the nail
A. 1 and 2
B. 2 and 4
C. 1,2 and 4
D. 1,2,and 3
Answers
Answer:
a
Explanation:
its right
To increase the electromagnet's strength, the student must enlarge the nail, wrap more wire around the nail, and increase the voltage of the battery. Option c is the correct answer.
How does an electromagnet work?The mechanics of an electromagnet are not overly complicated. It is accomplished by wrapping a length of conductive wire, usually copper, around a metal object.Until electricity is introduced, this appears to be nothing more than a jumbled collection of parts, similar to Frankenstein's monster. An electromagnet, on the other hand, does not require a storm to be activated. A current is introduced and flows through the wire, which can come from a battery or another source of power.As a result of the magnetic field created around the coiled wire, the metal is magnetized as if it were a permanent magnet. Electromagnets are useful because they can be activated and deactivated by closing and opening a circuit.To learn more about electromagnet, refer to
brainly.com/question/7382276
#SPJ2
When a balloon is rubbed on a surface and then touched to hair it will attract the hair, causing it to stick to the balloon. Explain why this happens.
Answers
Answer:
electricity
Explanation:
Answer:
This is called static electricity
Explanation:
The reasoning behind this is because the negative electrons in your hair are being transferred to the balloon, then when the balloon is removed it pulls on the hair with an attractive electric force.
angle of reflection
Answers
The angle of reflection equals the angle of Incidence
Explanation:
The Law Of Reflection
The engine of a boat (m = 2280 kg) exerts an
1800 N force northward, while the current
pushes it 1050 N eastward.
What is the magnitude of the acceleration
of the boat?
Answers
Answer:
a = 0.9139 [m/s²]
Explanation:
To solve this problem we must use Newton's second law, which tells us that the sum of forces on a body is equal to the product of mass by acceleration.
The forces are on two different axes, x & y axes (North and East). In this way, the Pythagorean theorem should be used to determine the total force.
Fx = 1800 [N]
Fy = 1050 [N]
[tex]F = \sqrt{(F_{x} )^{2} +(F_{y} )^{2} } \\F=\sqrt{(1800)^{2} +(1050)^{2} } \\F=2083[N][/tex]
Now using Newton's second law.
ΣF = m*a
where:
F = force = 2083.8 [N] (units of Newtons)
m = mass = 2280 [Kg]
a = acceleration [m/s²]
2083.8 = 2280*a
a = 0.9139 [m/s²]