The mass percentage of HCl 11,900x/118 g and molality of solution is 9.915 mol L^-1.
Molarity = 11.8 M
Molarity = (moles of HCl) / (litres of solution)
Molality = (moles of HCl) / (kilograms of solvent)
=> Let number of moles of HCl present be x moles.
So, 11.8 = x/litres of solution
litres of solution = x/11.8 litres.
So, volume in mL = x/11.8 * 1000 mL =>10,000x/118 mL
Density of solution = 1.19 g/ml
So, D = m/v
Mass of solution = D * v => 1.19 * 10,000x/118 => 11,900x/118 g
=> (11,900x/118)/1000 L => 11.9x/118 litres
Moles of HCl = x moles.
Molality = x/( 11.9x/118)
=> 118x/11.9x => 118/11.9 => 9.9156 mol L-1
=> Molality of solution = 9.915 mol L-1 (approx.)
To learn more about molality visit:https://brainly.com/question/26921570
#SPJ9
I need to know what’s the answer for the check point question on the picture. please help me.
In the combustion of methane the are reactants are CH₄(g) and O₂(g). The products are CO₂(g) and H₂O(g) .
Combustion is process in which the substance react with the oxygen to produce heat. In the combustion of , the methane , CH₄ is burnt in the presence of oxygen, O₂ produce carbon dioxide, CO₂ and water H₂O. it is very useful as fuel source. the chemical reaction is given as follows :
CH₄(g) + 2O₂(g) ----> CO₂(g) + 2H₂O(g) . + heat + light
Thus, In the combustion of methane the are reactants are CH₄(g) and O₂(g). The products are CO₂(g) and H₂O(g).
To learn more about combustion here
https://brainly.com/question/6817761
#SPJ1
Which functional groups are present in carbohydrates?
alkenes, alkynes, and phenyl groups
ethers, esters, and amides
carboxylic acids and amino groups
aldehydes, ketones, and hydroxyl groups
The functional groups are present in the carbohydrates is aldehydes , ketone , and hydroxyl groups.
Carbohydrates are the essential for living thing . they provide energy to living things. simple carbohydrates are : monosaccharides , disaccharides, oligosaccharides. Carbohydrates involves in fat metabolism. carbohydrates are also called as starch , simple sugars etc. carbohydrates found in foods . sugar is a source of carbohydrates. there are good carbohydrates which is high in nutrients moderate in calories. the bad carbohydrates are low in nutrients and high in calories.
Thus, The functional groups are present in the carbohydrates is aldehydes , ketone , and hydroxyl groups.
To learn more about carbohydrates here
https://brainly.com/question/14614055
#SPJ1
Read the chemical equation shown.
3SO2 + 2HNO3 + 2H₂O → 3H₂SO4 + 2NO
Which statement is true about this chemical equation?
OH (hydrogen) was oxidized and S (sulfur) was reduced.
OH (hydrogen) was reduced and N (nitrogen) was oxidized.
OS (sulfur) was oxidized and N (nitrogen) was reduced.
OS (sulfur) was reduced and N (nitrogen) was oxidized.
The statement "OH (hydrogen) was oxidized and S (sulfur) was reduced" is true about this chemical equation.
This chemical reaction is between Sulfur dioxide and nitric acid along with water. When nitric acid reacts with Sulfur dioxide, it gives sulfuric acid and nitrogen monoxide.
In the reaction, the hydrogen atoms in H₂O are oxidized to form H₂SO₄, and the sulfur atoms in SO₂ are reduced to form H₂SO₄.
Therefore, the OH from the water molecule gets oxidized to give out Sulfuric acid. Likewise, the Sulfur from Sulfur dioxide reduces to form the product that is sulfuric acid.
Therefore, the best option that suits the reaction is OH (hydrogen) was oxidized and S (sulfur) was reduced.
To know more about oxidation reactions, click below:
https://brainly.com/question/25886015
#SPJ9
Answer:
I believe the above answer is correct after my test i will let everyone know.
Explanation:
The reaction shown has first order kinetics:
2H2 O2 (1) —> 2H2 O (1) + O2 (g)
If originally a solution of 0.600 M H2O2, its concentration was found to be 0.0750 M after 54.0 min.
In how many minutes will the concentration be 0.300M?
A) 6.80
B) 18.0
C) 14.0
D) 28.0 E) 54.0
Option B. 1n 18 minutes the concentration of a solution of 0.600 M changes to 0.300M.
An order of first-order kinetics in which the rate of the reaction relies upon the concentration of only one reactant, and is proportional to the amount of the reactant. it could be represented via the equation, charge = kA, in which ok is the reaction fee steady, and A is the concentration of the reactant.
Calculation:-
T = 2.303/k log a/(a-x)
K = 2.303/T log a/(a-x)
= 2.303/54 log(0.600/0.0750)
K = 2.303/54 log 8
= 2.303/54 × 0.9
= 0.038
new concentration = 0.300M
T = 2.303/k log a/(a-x)
= 2.303/ 0.038 log 0.600/(0.300)
= 0.693/0.038
= 18.2 minutes
or 18 minutes approx.
Learn more about first-order kinetics here:-https://brainly.com/question/18916637
#SPJ1
Why do all elements have their own unique color? Please explain.
All the element have their own unique color because the every element have their own set of energy levels.
According to the bohr model of atoms : electrons exist at certain energy levels. when we give heat to electron , it gets excited and moves from lower energy level to higher energy level. the electron is less stable in higher energy level. when an electron returns from higher energy level to lower energy level it emits some energy in form of radiation. The wavelength of light depends upon energy level . and every elements have their own unique energy levels. The color for different element is different.
Thus, All the element have their own unique color because the every element have their own set of energy levels.
To learn more about element colors here
https://brainly.com/question/5809727
#SPJ1
Which of the following is an example of an unbalanced force?
A A computer on a table
B A man leaning against a wall
C A girl serving a volleyball
D Fruit in a bowl
Explanation:
C
as the girl applies a resultant force on the volleyball causing it to accelerate, there's an unbalanced force acting on the ball.
The substances sodium (Na), oxygen (O₂), and sodium oxide (Na2O) participate in this chemical reaction:
4Na + O2 → 2Na₂O.
Which statement best describes the reaction?
Sodium oxide is created by the chemical reaction statement best describes the reaction .
What is chemical reaction ?
Chemical reactions happen absolutely everywhere. While we sometimes associate chemical reactions with the sterile environment of test tubes and laboratories, nothing is farther from the truth. In fact, a vast number of transformations are creating a dizzying and almost incomprehensible series of new matter and energy changes in our world every second of every day.
In nature, chemical reactions are much more uncontrollable and sometimes much more complex than in the laboratory. Chemical reactions usually occur as needed. The fire raging in the forest, the slow rusting process of iron over the years in the presence of oxygen and water, or the delicate ripening of the fruit on the tree, the process of transforming various chemicals... ( The transformation of one group of substances (products) into another group of substances (products) is a so-called chemical reaction.
To learn more about Chemical reaction , click the link below ;
https://brainly.com/question/11231920
#SPJ9
A sample of gas is placed in a 25.0 L sealed container at STP. The
container is heated to 25 C. What will be the pressure in the container?
The pressure of a sample of gas placed in a 25.0L container at STP is 0.98atm.
How to calculate pressure?The pressure of an ideal gas can be calculated by using the following formula:
PV = nRT
Where;
P = pressureV = volume n = number of molesT = temperatureR = gas law constantAccording to this question, a sample of gas is placed in a 25.0 L sealed container at STP. The container is heated to 25°C. The pressure in the container is as follows:
P × 25 = 1 × 0.0821 × 298
25P = 24.47
P = 0.98atm
Therefore, 0.98atm is the pressure of the gas
Learn more about pressure at: https://brainly.com/question/18124975
#SPJ1
Of the following transitions in the Bohr hydrogen atom, the ________ transition results in the absorption of the highest-energy photon.
Of the following transitions in the Bohr hydrogen atom, the ________ transition results in the absorption of the highest-energy photon.
n = 7 → n = 4
n = 3 → n = 5
n = 3 → n = 2
n = 6 → n = 3
The highest energy transition in the hydrogen atom among the following is from n=6 to n=3. Hence option d is correct.
What is Bohr model?Bohr model of atom proposed the modern atomic model based on the interpretations from quantum mechanics. According to this model, electrons are revolving around the atom through circular paths of fixed energy.
The energy of the se levels and the momentum of electrons can be determined using Bohr's equation. Electrons can transit between these energy levels. The Rydberg formula for the transition is written as follows:
[tex]\frac{1}{\lambda} = R [\frac{1}{n_{1}^2} -\frac{1}{n_{2}^2} ][/tex]
Here, R is the Rydberg constant and n1 and n2 be the first and second energy levels.
The transition n=6 to n=3 gives the higher value for this equation. Hence, this transition results highest energy absorption.
To find more about Bohr's model, refer here:
https://brainly.com/question/3964366
#SPJ1
what has the biologist Rahul Kumar came to India to find
It is to be noted that Rahul Kumar the biologist came to India to find problems that he can solve using his knowledge in Biology.
Who is Rahul Kumar?Rahul Kumar, an Indian and the son of a migrant worker from Bihar, graduated with honors from IIT Roorkee and is currently on his way to the United States to pursue his PhD at the University of Utah.
A biologist is a scientist who undertakes biological study. Biologists are interested in researching all forms of life on Earth, whether they be single cells, multicellular organisms, or communities of interacting individuals. They often specialize in a single field of biology and have a specialized research emphasis.
The majority of biologists work full-time at government agencies, private research laboratories, medical testing facilities, higher education institutions, or other research facilities.
Physician's assistants, radiation and nuclear medicine technologists, and registered nurses are among the hospital employment available to those with a bachelor's degree in biology. These positions can also be found in clinics, physicians' offices, nursing homes, rehabilitation institutions, government organizations, the military, and other settings.
Learn more about biologist:
https://brainly.com/question/14887111
#SPJ1
Which element would be expected to have properties similar to antimony
Answer:
N, P, As, Bi, Mc
Explanation:
Similar chemical properties are usually found within the same column of the periodic table.
Antimony is Sb, which is in column 15.
Therefore all the elements in column 15, including N, P, As, Bi, Mc, should have similar chemical properties
For Silicon atoms, which I value will show exceptionally large increase over preceding IE values IE1, IE2, IE3, IE4, IE5, IE6
The ionization energy of the fifth electron IE5 would be exceptionally large.
What is the exceptionally large ionization energy?We know that the ionization energy is the energy that is required to remove an electron from an atom. This is the energy that must be supplied in order to make the electron to be able to escape the attractive force of the nucleus of the atom.
We know that Silicon has four electrons in the outermost shell. It is known that electrons that are in the same shell would have relatively close values of ionization energy.
The ionization energy values IE1, IE2, IE3, IE4 all belong to the outermost shell hence we would have an exceptionally large increase over preceding IE values at IE5.
Learn more about ionization energy:https://brainly.com/question/28385102
#SPJ1
24. The thumbprint-shaped region on the pressure/enthalpy
chart is called the
A. saturation curve.
B. saturation cycle.
C. superheated curve.
D. superheated region.
The thumbprint-shaped region on the pressure/enthalpy chart is called saturation curve
An enthalpy chart show the A/C cycle and at what temprature and pressure the refrigerant changes from gas to liquid and back to gas and the vapor liquid saturation curve of the pure substances is important from both the practical and thermodynamic viewpoint because it provide basic information on the behavior of the fluid as well as on its properties and the loop is the most common type of fingerprint and the ridges form elongated loop and some people have double loop fingerprint
Know more about pressure/enthalpy
https://brainly.com/question/17074575
#SPJ9
Calculate the volume (mL) of a 2.50M NaOH solution are required to make 725 mL of a 0.150M NaOH solution?
The volume of a 2.50M NaOH solution required to make 725 mL of a 0.150M NaOH solution is 43.5mL.
How to calculate volume of a solution?The volume of a solution can be calculated using the following expression:
CaVa = CbVb
Where;
Ca = initial concentrationCb = final concentrationVa = initial volumeVb = final volumeMolarity is the concentration of a substance in solution, expressed as the number moles of solute per litre of solution.
According to this question, 2.50M NaOH solution are required to make 725 mL of a 0.150M NaOH solution. The volume required can be calculated as follows:
2.5 × Va = 725 × 0.150
2.5Va = 108.75
Va = 43.5mL
Therefore, 43.5mL is the volume of the solution.
Learn more about volume at: https://brainly.com/question/12357202
#SPJ1
a sample of an unknown gas has a volume of 8.00L at 1.00 atm and 25.0°C. How many moles of gas are present? please explain in full detail so i can learn it
0.33 mol is the amount of the unknown gas present.
What amount of moles of the gas is present?The ideal gas law states that "the pressure multiplied by volume is equal to moles multiply by the universal gas constant multiply by temperature.
It is expressed as;
P × V = n × R × T
Where P is pressure, V is volume, n is the amount of substance, T is temperature and R is the ideal gas constant ( 0.08206 Latm/molK ).
Given the data in the question;
Volume of gas V = 8.00lPressure P = 1.00atmTemperature T = 25°C = ( 25 + 273.15 )K = 298.15KAmount of gas n = ?Plug the given values into the ideal gas law formula and solve for n ( amount of gas in moles ).
P × V = n × R × T
n = ( P × V ) / ( R × T )
n = ( 1.00atm × 8.00L ) / ( 0.08206Latm/molK × 298.15K )
n = 8.00Latm / 24.466189Latm/mol
n = 0.33 mol.
Therefore, the amount of gas is 0.33 mol.
Learn more about ideal gas law here: brainly.com/question/4147359
#SPJ1
Which element is used in "yellow" muted lights?
sodium
carbon
nitrogen
aluminum
Sodium is used in "yellow" muted lights because it produces a yellow-orange light when it is heated.
What is Sodium?
Sodium is a chemical element with atomic number 11 and the symbol Na (derived from the Latin natrium). It is a delicate, silvery-white metal that is very reactive. Due to its placement in group 1 of the periodic table, sodium is an alkali metal. 23Na is the only stable isotope of it. The free metal must be prepared from compounds because it does not exist in nature. The sixth most common element in the crust of the Earth is sodium, which can be found in a variety of minerals like feldspar, sodalite, and halite (NaCl). Since the action of water has been leaching sodium ions from the minerals of the Earth for aeons, many salts of sodium are highly water-soluble. As a result, sodium and chlorine are the most prevalent dissolved elements by weight in the oceans.
To learn more about Sodium
https://brainly.com/question/27655686
#SPJ1
true or false
Newton's first law of inertia says that an object at rest will stay at rest and an object in motion will stay in motion unless acted on by a force.
Newton's first law of inertia says that an object at rest will stay at rest and an object in motion will stay in motion unless acted on by a force; thus the statement is True
What is the law of inertia?The law of inertia is also known as Newton's first law of motion.
The law of inertia states that a body at rest or that is moving at constant or uniform motion along a straight line will remain in its state of rest or motion or uniform motion along a straight line unless acted upon by an external force.
The law of inertia explains why it s difficult to start an object moving or to stop a moving object.
Learn more about the law of inertia at: https://brainly.com/question/1830739
#SPJ1
17. 1s² 2s² 2p 3s² 3p6 4s² 3d¹0 4p65s¹ symbol?
I need help with #5 please. thank you
Answer:
Atom 3
Explanation:
Because it has electronic configuration of 10 which it is an atomic number of neon. And neon is a gas which is stable, hence does not react
A known reaction has Change in U= 38 kJ/mol. The reaction is done at constant pressure and you measure the amount
of work done to be w=+2 kJ/mol. What is q in kJ/mol?
q = 36kJ/ mol amount of heat is produced according to 1st law of Thermodynamics
What is 1st law of Thermodynamics ?
The first law of thermodynamics states that energy is neither created nor destroyed, only its form can be changed. In any system, energy transfer involves exceeding control limits by mass, external work, or heat transfer beyond limits. These cause changes in the stored energy within the control volume.
The first law of thermodynamics states that heat is a form of energy and therefore thermodynamic processes obey the law of conservation of energy. This means that it cannot generate or destroy thermal energy.
ΔU = q + w
38kJ/ mol = q + 2kJ/mol = 36kJ/mol
q = 36kJ/ mol amount of heat is produced according to 1st law of Thermodynamics
To know about 1st law of Thermodynamics from the link
https://brainly.com/question/26035962
#SPJ13
I need help with this
bace, acid and I'd not
bace, acid
covert 3.20 bar to atm
Taking into account the change of units, the 3.20 bar in atm is 3.15815 atm.
Rule of threeThe rule of three is a way of solving problems of proportionality between three known values and an unknown value, establishing a relationship of proportionality between all of them.
If the relationship between the magnitudes is direct, the direct rule of three must be applied. To solve a direct rule of three, the following expression must be followed, being a, b and c known data and x the variable to be calculated:
a ⇒ b
c ⇒ x
So: x= (c×b)÷a
The direct rule of three is the rule applied in this case where there is a change of units.
Conversion of units in this caseYou can apply the following rule of three: if 1.01325 bar equals 1 atm, 3.20 bar equals how many atm?
1.01325 bar ⇒ 1 atm
3.20 bar ⇒ x
So: x= (3.20 bar× 1 atm)÷ 1.01325 bar
Solving:
x= 3.15815 atm
In summary, the pressure is 3.15815 atm.
Learn more about change of units with this example:
brainly.com/question/18185192
#SPJ1
Commercial concentrated nitric acid, HNO3, is 15.8 M. What volume of concentrated HNO3 would be required to prepare 842 mL of 7.77 M HNO3?
The volume of the concentrated HNO₃ that would be required to prepare 842 mL of 7.77 M HNO₃ is 414 mL
How do I determine the volume concentrated HNO₃ required?We can obtain the volume of the concentrated HNO₃ required to prepare 842 mL of 7.77 M HNO₃ by using the dilution formula as shown below:
Molarity of concentrated HNO₃ (M₁) = 15.8 MVolume of diluted solution (V₂) = 842 mL Molarity of diluted solution (M₂) = 7.77 MVolume of concentrated HNO₃ (V₁) =?M₁V₁ = M₂V₂
15.8 × V₁ = 7.77 × 842
15.8 × V₁ = 6542.34
Divide both side by 15.8
V₁ = 6542.34 / 15.8
V₁ = 414 mL
Thus, the volume of concentrated HNO₃ required is 414 mL
Learn more about volume:
https://brainly.com/question/24159217
#SPJ1
When 15.6 mL of 0.500 M Silver (1) Nitrate is added to 12.5 mL of 0.300 M
Ammonium chloride, how many grams of solid product (if any) formed?
Select one:
A. 0.537 g
B. 1.65 gx
C. NR
D. 1.11 g
The grams of solid product is 0.537 g.
Hence, Option A is correct.
The above equation can be solved by
The Symbol Ag used for Silver originates from the Latin word “Argentum
AgNO3 + NH4Cl ? AgCl + NH4NO3
(15.6 mL) x (0.500 M AgNO3) = 7.8 m mol AgNO3
(12.5 mL) x (0.300 M NH4Cl) = 3.75 m mol NH4Cl
7.8 m mol AgNO would react completely with 7.8 x (1/1) = 7.8 mol NH4Cl, but there is not that much NH4Cl present, so NH4Cl is the limiting reactant.
(3.75 m mol NH4Cl) / (1000 m mol/mol) x (1/1) x (143.3214 g AgCl/mol) = 0.537 g AgCl.
Hence, The grams of solid product is 0.537 g.
To know more about Silver nitrate from the given link
https://brainly.com/question/14542133
#SPJ1
What is the possible chemical formula formed between Hydrogen ion and Nitrate
ion?
H₂NO3
H₂NO3
H3NO2
HNO3
a forest is a habitat for many living things. what happens to these different living things
Forest is a habitat for many plants and animals because it provides a suitable environment for them.
Forest is a habitat for many plant life and animals as it offers a appropriate environment for them. As an instance, neem, Sheesham, Palash, tiger, porcupine, elephants, jackal and so forth. The ground beneath the tree of the forest is the forest floor.
It causes habitat destruction, accelerated chance of predation, reduced food availability, and lots greater. As a result, some animals lose their homes, others lose meals assets – and ultimately, many lose their lives. In reality, deforestation is one of the essential causes of extinction.
Weather trade also alters the life cycles of flora and animals. as an instance, as temperatures get warmer, many plant life are starting to develop and bloom earlier inside the spring and live to tell the tale longer into the fall. A few animals are waking from hibernation sooner or migrating at different instances, too.
Learn more about habitat here:- https://brainly.com/question/23780904
#SPJ9
How many grams of a 12.5 % sugar solution contain 56.0 g of sugar?
Considering the definition of percentage by mass, 448 grams of a 12.5 % sugar solution contain 56.0 g of sugar
Percentage by massThe percentage by mass expresses the concentration and is defined as the ratio of the mass of the solute to the mass of the solution, expressed as a percentage.
The percentage by mass is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage:
percent by mass= (mass of solute÷ mass of solution)×100%
Mass of sugar solutionIn this case, you know:
percent by mass= 12.5%mass of sugar= 56 gmass of solution= ?Replacing in the definition of percent by mass:
12.5%= (56 g÷ mass of solution)×100%
Solving:
12.5%÷ 100%= 56 g÷ mass of solution
12.5%÷ 100%= 56 g÷ mass of solution
0.125= 56 g÷ mass of solution
0.125× mass of solution= 56 g
mass of solution= 56 g÷ 0.125
mass of solution= 448 g
Finally, the mass of solution is 448 grams.
Learn more about percentage by mass:
brainly.com/question/19168984
brainly.com/question/18646836
#SPJ1
5. What process occurs when large swaths of forest are cut down, damaging the landscape in an area?
combustion
deforestation
denitrification
nitrogen-fixation
Answer:
deforestation
Explanation:
deforestation is clearing Earth's forests on a massive scale, often resulting in damage to the quality of the land. Forests still cover about 30 percent of the world's land area, but swaths the size of Panama are lost each and every year.
During complete combustion, natural gas combines with oxygen to produce _____.
methane and water vapor
carbon dioxide and water vapor
carbon monoxide and water vapor
carbon dioxide and carbon monoxide
Answer:
During complete combustion, natural gas combines with oxygen to produce carbon dioxide and water vapor.
Explanation:
A fuel undergoes a complete combustion process when it swiftly combines with oxygen (O2), which then forms carbon dioxide (CO2) and water (H2O).
If 2.186×10-2 mol of NH3 gas has a volume of 365 mL at 32°C, what would be the volume of 2.186×10-2 mol of N2 gas under identical temperature and pressure conditions?
The volume of the 2.186×10⁻² mole of N₂ gas under identical temperature and pressure conditions will also be 365 mL
How do I determine the volume of N₂?We'll begin by obtaining the pressure of NH₃. This can be obtained by using the ideal gas equation as illustrated below:
Mole of NH₃ (n) = 2.186×10⁻² moleVolume (V) = 365 ml = 365 / 1000 = 0.365 L Temperature (T) = 32 °C = 32 + 273 = 305 KGas constant (R) = 0.0821 atm.L/Kmol Pressure (P) = ?PV = nRT
Divide both sides by V
P = nRT / V
P = (2.186×10⁻² × 0.0821 × 305) / 0.365
P = 1.5 atm
Finally, we shall determine the volume of the N₂ under identical (i.e the same) temperature and pressure conditions. This is illustrated below:
Mole of N₂ (n) = 2.186×10⁻² moleTemperature (T) = 32 °C = 32 + 273 = 305 KPressure (P) = 1.5 atm Gas constant (R) = 0.0821 atm.L/Kmol Volume (V) = ?PV = nRT
Divide both sides by P
V = nRT / P
V = (2.186×10⁻² × 0.0821 × 305) / 1.5
V = 0.365 L
Multiply by 1000 to express in liters
V = 0.365 × 1000
V = 365 mL
Thus, the volume is 365 mL
Learn more about volume:
https://brainly.com/question/7651677
https://brainly.com/question/18449175
#SPJ1