A sample of gas is placed in a 25.0 L sealed container at STP. The
container is heated to 25 C. What will be the pressure in the container?

Kinetic energy is increasing, and potential energy is decreasing statement best describes the changes in energy as she begins to descend.

A particle or an object that is in motion has a sort of energy called kinetic energy. An item gains kinetic energy when work, which involves the transfer of energy, is performed on it by generating a net force. Kinetic energy refers to the energy that a moving thing has as a result of its motion.

Motion is kinetic energy. A object's velocity increases with pace. both the kinetic energy of water flowing (hydraulic energy) and the wind (wind energy), which can be used to produce energy. (Kinetic energy) is a type of energy.

To know more about Kinetic energy visit:

https://brainly.com/question/26472013

#SPJ13

The practice is the most sustainable is using cloth grocery bags over and over again.

The sustainable practices are the practices which supports the ecological and economic health . the is of plastic bag , paper or cloth bag over and over again . we have to reuse for the shopping purpose. go for the paperless document. cloth bag are reusable and better than a plastic bags. cloth bag will reduces the plastic use and the pollution will also reduce caused by the plastic bags.

Thus, The practice is the most sustainable is using cloth grocery bags over and over again.

To learn more about sustainable practice here

https://brainly.com/question/14815584

#SPJ1

On average, the total mass of ions in 4.75 liters of Mackenzie River water is 0.466 g grams.

The formula mass of an ionic compound is determined in the same manner as the formula mass of a covalent compound is determined: by adding the average atomic masses of all the atoms in the compound's formula.

Hence, the total mass is computed as follows:

(0.820 mM Ca 2⁺) X ( 2.25 L) = 1.845 mmoles at 40.0 g/mol = 73.8 mg

(0.430 mM Mg 2⁺) X ( 2.25 L) = 0.9675 mmoles at 24.3 g/mol = 23.51 mg

(0.300 mM Na⁺) X ( 2.25 L) = 0.675 mmol at 23.0 g/mol = 15.52 mg

(0.0200 mM K⁺) X ( 2.25 L) = 0.045 mmol at 39.1 = 1.75 mg

(0.250 mM Cl-) X ( 2.25 L) = 0.5625 mmol at 35.45 g/mol = 19.94 mg

(0.380 mM SO₄²-) X ( 2.25 L) = 0.855 mmol at 96.06 g/mol = 82.13 mg

(1.82 mM HCO₃ -) X ( 2.25 L) = 4.095 mmol at 61.02 g/mol = 249.87 mg

Thus, total mass = 73.8 + 23.51 + 15.52  + 1.75 + 19.94 + 82.13 + 249.87

= 466.52mg

Converted into grams  we have:
466.52/1000

= 0.46652

Hence, on average, the total mass of these ions 4.75 L [tex]\approx[/tex] 0.47 grams.

Learn more about Total Mass:
https://brainly.com/question/17552181
#SPJ1

Answer:

26.03 inHg

Explanation:

1 atm = 29.92 inHg

0.87 atm = 29.92 inHg x 0.87

0.87 atm = 26.03 inHg

Answer:

Third choice

Explanation

Because reactivity of the elements decrease across the periodic table and it depends on the number of protons it has. Hence low number of protons more reactive.

Heat from the burner radiates through the liquid and causes even heating. Due to this reason, the water at the top of the beaker the same temperature as that of the bottom. The correct option is option A.

Temperature is used to measure degree or intensity of heat of a particular substance. Temperature is measured by an instrument called thermometer.

Temperature can be measured in degree Celsius °c, Kelvin k or in Fahrenheit. Temperature is a physical quantity. Heat always flow from higher temperature source to lower temperature source. Heat from the burner radiates through the liquid and causes even heating. Due to this reason, the water at the top of the beaker the same temperature as that of the bottom.

Therefore, the correct option is option A.

To know more about temperature, here:

https://brainly.com/question/13694966

#SPJ1

Answer:

.......element 3 ............

Copper metal plus zinc sulfate solution : is not  possible because the copper metal is less reactive than zinc and copper cannot displace the zinc.

The copper metal with zinc sulfate reaction is not possible because copper is less reactive than the zinc cant cannot displace the zinc. so, the reaction :

Cu + ZnSO₄ ---->    no reaction

but the zinc plus copper sulfate is possible , copper is less reactive than zinc and zinc can displace the copper . and the reaction is called as displacement reaction the reacion is given as :

CuSO₄   +   Zn   ----->    ZnSO₄    +   Cu

Thus, Copper metal plus zinc sulfate solution : is not  possible because the copper metal is less reactive than zinc and copper cannot displace the zinc.

To learn more about Displacement reaction here

https://brainly.com/question/3172917

#SPJ1

According to the given information Group in which no response is expected is a negative control.

The correct option is C.

A scientist may develop the hypothesis that a given type of tomato will be red if it carries the gene for the colour red. The scientist then discovers that every tomato of this variety is red during investigation.

Hypotheses are frequently employed to promote scientific research and enhance knowledge. These clear declarations serve as the cornerstone for all research experiments. Therefore, a problem in the creation of a hypothesis may lead to errors in the design of a whole experiment.

As previously said, a hypothesis serves as a response to the research question and directs the gathering and analysis of data. Researchers can use hypotheses to both identify relationships between variables and forecast relationships based on theoretical principles and/or empirical data.

To know more about Hypothesis visit:

https://brainly.com/question/5177511

#SPJ13

The assumption that an atom is indestructible is refuted by the fact that it can be further split into protons, neutrons, and electrons.

However, an atom is the smallest particle involved in chemical reactions. According to Dalton, every aspect of an element's atoms is the same.

The atom is the smallest unit of matter that may be divided without generating particles with an electrical charge. It is also the smallest material with properties resembling chemical elements. As a result, the atom acts as the basic building block of chemistry. Examine various electron configurations in the electron shells that enclose the atomic nucleus of an atom.

Examine various electron configurations in the electron shells that enclose the atomic nucleus of an atom. An atom is primarily made of space. The rest is made up of a positively charged nucleus made up of protons and neutrons that is surrounded by a cloud of negatively charged electrons. The nucleus is small and dense in comparison to electrons, which are the lightest charged particles in nature.

To know more about  atoms visit : brainly.com/question/13654549

#SPJ1

16 grams of HCl are in 1 L of 6 M HCl

Number of moles of a substance is actually the ratio of the given mass in the chemical reaction to the mass of one mole of substance. One mole of any substance equals Avogadro's number. It is also used to express concentration units such as mole per liter or molecular weight

Formula for molarity of solute is given as:

Molarity =   moles of solute                

                  Volume of solution in liter

moles of solute = Volume of solution × Molarity

moles of solute = 1L × 6M ⇒ 6moles

Mass of HCl = Number of moles × Molecular weights

                     = 6 × 36.5 ⇒ 16 grams

Therefore the 16 grams of HCl are in 1 L of 6 M HCl

To know more about Gram or mass

https://brainly.com/question/3527852

#SPJ1

300 grams of sodium iodide, Nal, must be used to produce 90.2 g of iodine, I₂

Sodium iodide is the ionic compound formed from the chemical reaction of sodium metal and iodine

Here given data is

I₂ has the molar mass = 253.8g/mol

So how many moles of I₂ we want to produce = 90.2 g I₂ ×1mol I₂ /253.8g/mol = 0.35 mole of I₂

Then the conversion of NaI to I₂ are

2 NaI → 2Na + I₂

0.35 mole of I₂ × 2 mole of NaI/mole of I₂ = 2 mole of NaI are needed

covert this value into gram

2 mole of NaI ×150. g NaI / mole NaI = 300 gram NaI would be needed

Know more about gram

https://brainly.com/question/6579020

#SPJ1

a) The number of moles of LiOH in 1.0L of 0.25M LiOH is 0.25.

b)  The mole-to-mole ratio of LiOH to OH⁻ is  1:1.

c) The number of moles of  OH⁻ ions in 1.0L of 0.25M LiOH is 0.25.

d) The pH is equal to 13.39.

A mole can be defined as a unit for the measurement of a huge number of entities of atoms, molecules, ions, or other particular particles.  The number of entities constitute in one mole is equal to 6.023 × 10 ²³ which is known as Avogadro’s constant.

The dissociation of LiOH in water is as:

LiOH (aq) →  Li⁺(aq)  + OH⁻(aq)

The mole-to-mole ratio of LiOH to OH- in the balanced chemical equation is 1 : 1 as one mole of LiOH produces one mole of OH⁻ ions.

Given, the number of concentrations of LiOH solution = 0.25 M

The volume of the solution  = 1.0 L

The number of moles of LiOH = Molarity ×Volume

n = 0.25 × 1

n = 0.25 mol of LiOH

The number of moles of ions of OH⁻ from LiOH = 0.25 mol

We know that pH + pOH = 14

pH = 14 -pOH

pH = 14 - (-log [OH⁻])

pH = 14 + log (0.25)

pH = 13.39

Learn more about the mole, here:

brainly.com/question/26416088

#SPJ1

The Gibbs free energy of the system is - 12.7 kJ/mol.

The term Gibbs free energy has to do with the amount of thermodynamic work that could be done by a system. We know that we can find the Gibbs free energy by the use of the equilibrium constant and the temperature of the system and that is what we have to do in this question as we do it.

We know that;

ΔG = -RTlnK

ΔG = The Gibbs free energy

R = gas constant

T = temperature

K = equilibrium constant

Thus;

R = 8.314 J/K/Mol

T = 25°C + 273 = 298 K

K =  1.7 x 10^2

When we substitute the values, we have;

ΔG =-(8.314  * 298 * ln  1.7 x 10^2)

ΔG =- 12.7 kJ/mol

We can see from the calculation that we are going to have the Gibbs free energy of the system thus described as - 12.7 kJ/mol.

Learn more about Gibbs free energy:https://brainly.com/question/20358734

#SPJ1

Reaction will move forward and favor according to Le Chatelier's principle on increasing temperature of water.

According to Le Chatelier's principle, the position of equilibrium will shift if a system in a state of dynamic equilibrium is disturbed by a change in its conditions. The point of equilibrium will shift toward the products to offset the additional reactant if you raise the concentration of one of the reactants. For instance, extra N2 will react with H2 in the system if it is added. More ammonia will be produced as a result of this.

Similar to this, the location of equilibrium would move to the left if you reduced the concentration of one of the reactants. In this instance, removing N2 would cause more NH3 to break down into the reactants.

To know more about  Le Chatelier's principle visit https://brainly.com/question/2001993

#SPJ1

Explanation:

as the number of shell increased the size of the atom increase but the same shell with different number of valence electron, as electron number increase the attraction between nucleus and valance electron increased then the atom becomes shrinks and so the size of it decreased.

The set of reactions that best represents the diagram of a precipitation reaction is given below:

Li₂SO₄ (aq) + AgNO₃ (aq)  ---->

The net ionic equation is given below:

SO₄²⁺ (aq) + 2 Ag⁺ (aq)  ----> Ag₂SO₄ (s) (a precipitate)

Precipitation reactions are reactions in which two soluble solutions when they are mixed result in the formation of an insoluble precipitate.

Precipitation reactions rea usually double replacement reactions.

Double replacement reactions also known as double displacement reactions are reactions in which an exchange of radicals occurs between two metallic cations resulting in the formation of an insoluble compound that forms the precipitate observed.

Considering the given reactions and the products obtained:

NH₄Br (aq) + Pb(C₂H₃O₂)₂ (aq) ---> forms no precipitate

KNO₃  (aq) + CuCl₂(aq) ---->  forms no precipitate

Li₂SO₄ (aq) + 2 AgNO₃ (aq)  ---->  2 LiNO₃ (aq) + Ag₂SO₄ (s) (forms a precipitate)

NaClO₄ (aq) + CaCl₂ (aq)  ---->  forms no precipitate

Learn more about double replacement reactions at: https://brainly.com/question/23918356

#SPJ1

Solid potassium (K) conducts an electric current, whereas solid potassium iodide (KI) does not because solid potassium has a delocalized sea of electrons and KI has its cations and anions.

Positively charged potassium and negatively charged iodine combine to form the straightforward inorganic ionic chemical potassium iodide. It is solid at room temperature and resembles sodium chloride or table salt in terms of crystalline structure.

The major uses of potassium iodide are to treat hyperthyroidism and as a dietary supplement for those who are iodine deficient. Additionally, it is utilized as an expectorant to treat asthma and other long-term respiratory disorders, as well as to shield the thyroid gland from radiation.

When potassium iodide is dissolved in water, it splits into cations and anions, enabling free electron movement across the solution. It does not conduct electricity when it is in a dry crystal state, though, like other ionic compounds.

To know more about potassium iodide, visit:

https://brainly.com/question/12050170

#SPJ13

Answer:

this is your answer 1234

Answer:

q

=

−

176000

J

×

1

k

J

1000

J

=

−

176

k

J

The specific heat capacity of the metal can be calculated using calorimetric equation. The specific heat capacity of the metal is 0.499 J/g °C.

Specific heat capacity of a substance is the heat energy required to rise its temperature by one degree Celsius per one gram. It is an intensive property and thus constant for a substance.

The calorimetric equation connecting the mass m, specific heat capacity c, temperature difference ΔT  with the heat energy q is written as :

q = m c ΔT .

Given the heat energy of the metal is lost to ethylene glycol. Hence the heat energy change for both of the substance are equal and can be written as follows:

135 g × (153 -38.2 °C ) × c = 255 g × 2.43 J/g °C × (38.2 -25.7 °C)

c = [ 255 g × 2.43 J/g °C × (38.2 -25.7 °C) ] / [ 135 g × (153 -38.2 °C ) ]

  = 0.499 J/g °C.

Hence, the specific heat capacity of the metal is 0.499 J/g °C..

To find more on calorimetry, refer here:

https://brainly.com/question/11477213

#SPJ2

The DNA parts are identified as:

Genetic codes are nucleotide sequences in deoxyribonucleic acids (DNA) and ribonucleic acids (RNA) that determines the order of an amino acid which is the building block of proteins. It is a set of rules for translating information encoded genetic materials by living cells.

The part labelled A are called Nitrogen bases containing adenine and thymine, T pair, cytosine, C and guanine, G pair that are bound to form DNA while the Sugar phosphate backbone forms the structural base of the DNA and RNA.

The complete question is:

Use the drop-down menus to identify the parts of DNA.

Label A

Label B

Learn more on DNA here: https://brainly.com/question/16099437

#SPJ1

Answer: Label A is nitrogen bases

Label B is sugar phosphate backbone

In business, it is crucial to keep costs low because when costs exceed the profits or income then the business runs out of cash and becomes bankrupt.

A cost is the worth of money that has been used up to create something or supply a service and is thus no longer accessible for use in production, research, retail, or accounting.

In business, the cost might be one of acquisition, in which case the money spent to obtain it is recognized as cost.

Businesses incur two sorts of expenses: fixed and variable costs. Variable costs change with production, but fixed costs do not. Overhead expenses are another term for fixed costs.

Learn more about costs:
https://brainly.com/question/15135554
#SPJ1

Answer: 17.5 %

Write the equation for relative Atomic mass in terms of an ( 'a' being one isotope's mass) and solve for x:

88.7 = [tex]\frac{(a * 88) + ((100 - a) * 92)}{100}[/tex]

8870 = 88*a + 9200 - 92 * a

4*a = 330

a = 82.5

Find the value of b using a,

100 - a = b

100 - 82.5 = b

b = 17.5

So, the % abundance for the isotope with mass number 88 is 82.5% and the % abundance for the isotope with mass number 92 is 17.5% .

To learn more about natural abundance,

https://brainly.com/question/13187634

The concentration of the unknown [tex]H_3PO_4[/tex] solution would be 0.0368 M

The equation of the reaction is as follows:

[tex]H3PO_4(aq)+3NaOH(aq)--- > 3H_2O(l)+Na_3PO_4(aq)[/tex]

The mole ratio of the  [tex]H_3PO_4[/tex] solution to the NaOH solution is 1:3.

But 0.140 M, 25.24 mL of NaOH was used.

Recall that: mole = molarity x volume (in Liters)

Mole of 0.140 M, 25.24 mL of NaOH = 0.140 x 25.24/1000

                                                             = 0.0035336 mol

Following the mole ratio, the equivalent mole of [tex]H_3PO_4[/tex] would be:

0.0035336 /3 = 0.00117786666

Recall that: molarity = mol/volume (in Liters)

Molarity of 0.00117786666 mol, 32.00 mL [tex]H_3PO_4[/tex] = 0.00117786666/0.032

                                                                                  = 0.0368 M

In other words, the molarity of the [tex]H_3PO_4[/tex] solution to 3 significant figures is 0.0368 M.

More on molarity can be found here: https://brainly.com/question/8732513

#SPJ1

Answer: 6

Explanation:

If we are only looking at the number of oxygen atoms in the product then the answer is 6.

NO3 contains 3 oxygen atoms.

(NO3)2 means that we have 2 NO3 groups which means there are 6 oxygen atoms.

Yes, because of the liquid's specific heat capacity or heat capacity, different liquids heat up at varying speeds.

Which amount of heat is needed to raise the liquid's temperature by one degree Celsius? When analyzing a mass of 1 kg, the term "heat capacity" or "specific heat capacity" refers to the amount of heat needed to raise the temperature of 1 kilogram of liquid or fluid by 1°C.

area of the body's surface. nature of the body's surface. the body's surface's composition (material effects conductivity through walls of the body).

To know more about specific heat capacity visit:-

https://brainly.com/question/28302909

#SPJ1

Answer:

b.Independent variable

Explanation:

The independent variable is the one that is changed by the scientist. To insure a fair test, a good experiment has only one independent variable. As the scientist changes the independent variable, he or she records the data that they collect.

.

Explanation:

Neon is a non-metal. it belongs to group 8 or 18 of the periodic table of elements and is also referred to as a noble gas.

The reaction given below shows a balanced incomplete combustion reaction:

B. 2 C₅H₁₂ + 11 O₂--> 10 CO + 12 H₂O

A combustion reaction is a reaction that involves substances reacting exothermically with oxygen to release large amounts of heat and light energy.

Hydrocarbons are compounds that contain only hydrogen and carbon.

Hydrogen combusts completely in oxygen to produce carbon(iv) oxide and water.

However, the incomplete combustion of hydrocarbons produces carbon (ii) oxide and water instead carbon(iv) oxide and water.

Learn more about combustion reactions at: brainly.com/question/20893322

#SPJ1