The original concentration of the solution will be 2.1 × 10⁻³ m
What is dilution factor?Dilution factor is the ratio to dilute the stock solution. This can be expressed as the ratio of the volume of the final diluted solution to the initial volume removed from the stock solution.
Differs from dilution factor. Dilution ratio refers to a simple dilution ratio that combines a unit volume of solute with the desired volume of solvent. On the other hand, the dilution factor refers to the ratio between the volume of the initially concentrated solute and the volume of the final diluted solution. Which is DF = Vₙ / V₀
For the given question,
Vₙ = DF × V₀
Where, Vₙ = Final concentration of the serial dilution
V₀ = Original concentration of the solution
DF = Dilution factor
Since the solution is diluted 6 times then
Vₙ = 1/5⁶ × V₀
1.4x10⁻⁷ = V₀/15625
V₀ = 15625 × 1.4x10⁻⁷
V₀ = 2.1 × 10⁻³ m
To know more about dilution factor visit:
https://brainly.com/question/20113402
#SPJ4
Use this equation for the next question.
Mg(OH)2 + NaCl ® MgCl₂ + NaOH
How many hydrogen atoms are on the reactant side?
000
1
02
4
8
If the arrow is pointed this way ->, there is only one H atom on the reactant side; however, if it is pointed this way <- , there are two H atoms. The correct option is A.
Where are the hydrogen atoms?The majority of stars and the sun include it, and the giant Jupiter is primarily made of it. Water is where you'll find the most hydrogen on Earth. Less than 1 part per million cubic volume is all that is found of it as a gas in the air.
What of all atoms are hydrogen?According to the Los Alamos, hydrogen makes up more than 90% of all atoms, which is equivalent to three quarters of the universe's mass. Hydrogen is named after the Greek terms hydro for "water" or genes for "forming."
To know more about Hydrogen atom visit:
https://brainly.com/question/8806577
#SPJ13
The complete question is -
Mg(OH)2 + NaCl ® MgCl₂ + NaOH
How many hydrogen atoms are on the reactant side?
A-1
B-2
C-4
D-8
How is the bent geometry related to the trigonal planar geometry?
They are related through the trigonal planar being the electron geometry and bent is the molecular geometry for an element that has two bonds and one lone pair.
What is Geometry?This is referred to as the study of different types of shapes, figures and sizes and is used in various fields such as mathematics, chemistry etc.
In the field of chemistry, there are different types such as trigonal planar and the bent geometry which are related as a result of some shared characteristics which include the following in the subsequent paragraph.
They are related through the trigonal planar being the electron geometry and bent is the molecular geometry for an element that has two bonds and one lone pair and is therefore the correct choice in this scenario.
Read more about Geometry here https://brainly.com/question/28225420
#SPJ1
Why is group IIA elements called alkali earth metals??
Answer:
Explanation:
As alkali is a base and it produce OH- when disolved in water. So we can say that they are called "alkaline" earth metals because they form "alkaline" solutions, hydroxides, when they react with water . "Earth" was the alchemists term for the oxides of alkaline earth metals.
Calculate the potential energy of a statue with a mass of 20 kg while sitting on a table that is 2 m high
Answer:
392.4 J
Explanation:
Potential Energy = m g h = 20 * 9.81 * 2 = 392.4 J
what is the ph of a barium hydroxide solution obtained by dissolving 0.10 grams of barium hydroxide in enough water to obtain 250. ml of solution? (mm of ba(oh)2 is 171.3 g/mol)
The pH of a barium hydroxide solution obtained by dissolving 0.10 grams of barium hydroxide in 250ml of water is 17.
When barium hydroxide is dissolved in water, it forms,
Ba(OH)₂ → Ba⁺ + 2OH⁻
the concentration of the hydroxide ion in the solution will be,
Molarity = Moles of solute/volume of solution
Moles of Ba(OH)₂ = 2 moles of OH⁻
So, we can write,
0.10/171.3x2 =Moles of OH⁻
Moles of OH⁻ = 0.000291 moles.
Molarity of OH⁻ solution = 0.000291 x 1000/250
Molarity/concentration of OH⁻ solution = 0.001 mol/L
pH = 14 - p[OH]
p[OH] = log[0.001]
p[OH] = -3
pH = 14+3
pH = 17
So, the pH of the solution is 17.
To know more about pH value, visit,
https://brainly.com/question/1810086
#SPJ4
Chemical bonds contain a form of energy called chemical energy. Forming and breaking chemical bonds during reactions involves changes in energy.
---------------------------------------------------------
Identify if energy is released or absorbed when a chemical bond is broken. Then identify if energy is released or absorbed when a chemical bond is formed.
Explanation:
when a chemical bond is broken, the excess energy that was stored in the bond will be released whereas, for a bond to be formed energy is absorbed.
hope it helps. :)
13. Identify two elements on Mendeleev's table that combines with oxygen in the same ratio
as magnesium.
14. Identify one characteristic used by Mendeleev to develop his classification system of
the elements.
15. State one difference between Mendeleev's Table and the Modern Periodic Table.
Two elements on Mendeleev's table that combines with oxygen in the same ratio as magnesium are Beryllium and Calcium.
They form in a ratio of 1:1 with oxygen.
What is the reason behind Berylium and Calcium in the ratio of 1:1 with oxygen?
The one-to-one charge ratio results in the formula CaO. Calcium and Oxygen have iconic bonding because calcium loses two electrons and oxygen gains two to complete their octet.
BeO can be produced by the reaction between beryllium and oxygen .In this reaction , each Be atom loses its two valence electrons to 0 atoms , forming Be2+ions and O2- ions. The electrostatic attraction between the oppositely charged ions forms the iconic bond .
One characteristic used by Mendeleev to develop his classification system of the elements:
Mendeleev was directed by two variables: Expanding nuclear masses, and Gathering of components having comparative properties. Mendeleev thought about formulae of hydrides and oxides as one of the fundamental models for order, among substance properties.
One difference between Mendeleev's Table and the Modern Periodic Table is :
Mendeleev's periodic table is based on atomic mass whereas +The modern periodic table is based on the atomic number.
To learn more about Mendeleev's Periodic table from the given link:
https://brainly.com/question/11505562
#SPJ1
What is the reaction and product of each of the formulas
HCI + NaOH --> H₂O + NaCl
_C3H8 + 502 --> 3CO₂ + 4H₂O
2Li+F2 --> 2LiF
2AgNO3 + CuCl2 --> _Cu(NO3)2 + 2AgCl
Explanation:
1. HCI + NaOH --> H₂O + NaCl is a neutralisation reaction. The product is soluble sodium chloride salt and water.
2. _C3H8 + 502 --> 3CO₂ + 4H₂O is a propane combustion reaction. The product is carbon dioxide gas and water.
4. 2Li+F2 --> 2LiF is a combination reaction. The product is insoluble lithium fluoride solid
5.2AgNO3 + CuCl2 --> _Cu(NO3)2 + 2AgCl is a precipitation reaction. The product is copper(II) nitrate and an insoluble silver chloride salt(precipitate)
how many electrons does it take to fill the mos formed from the combination of the 3s orbitals of two atoms?
The number of electrons it take to fill the mos formed from the combination of the 3s orbitals of two atoms simply is 14 electrons.
How electrons are distributed in the 3s orbitals.The 3s orbital possess two different spherical nodes which is highly connected with the principal quantum number. In order words, it has 2 radial nodes. Also the shape of the 3s orbital is spherical in shape.
That being said, from the context of the above given task, the number of electrons which fill the mos formed from the combination of the 3s orbitals of two atoms is fourteen electrons.
However, the electron configuration of an atom simply is the arrangement of electrons in the electron shell or orbit of the atom of that element.
In conclusion, it can be deduced from above s orbital has a maximum of two electrons and this energy increases as the orbitals increases.
Read more on electron:
https://brainly.com/question/860094
#SPJ1
How many moles are equal to 4.0 x 1025 atoms of tungsten
The number of moles are equal to 4.0 × 10²⁵ atoms of tungsten is 0.6624 moles.
Mole is the amount of substance that contain the element chemical units present in 12 g of carbon - 12.
given that :
number of present in atoms of tungsten = 4.0 × 10²⁵
1 mole contains = 6.022 × 10²³ atoms
therefore, 4.0 × 10²⁵ atom will contains :
number of moles = 4.0 × 10²⁵ / 6.022 × 10²³
number of moles = 0.6642 moles.
Thus, The number of moles are equal to 4.0 × 10²⁵ atoms of tungsten is 0.6624 moles.
To learn more about moles here
https://brainly.com/question/26416088
#SPJ1
a balloon is partially inflated with 5.00 l of helium at sea level where the atmospheric pressure is 1.00 atm. the balloon ascends to an altitude of 1600 m where the pressure is 0.83 atm. a) what is the volume of the balloon at the higher altitude if the temperature of the helium does not change during the ascent? b) what is the percent increase in volume?
[tex]P 1 V 1 = P 2 V 2[/tex] ..we get [tex]V 2 = 6 . L[/tex] Explanation: [tex]V 2 = P 1 V 1 /P 2[/tex] = [tex]992 X 5.15 /857[/tex] mbar
what is volume and pressure?
Decreasing the volume of a contained gas will increase its pressure, and increasing its volume will decrease its pressure. In fact, if the volume increases by a certain factor, the pressure decreases by the same factor, and vice versa.The relation between volume V pressure P and absolute temperature T of an ideal gas is PV = xT where x is a constant.Boyle found that when the pressure of gas at a constant temperature is increased, the volume of the gas decreases. when the pressure of gas is decreased, the volume increases. this relationship between pressure and volume is called Boyle's law.The equations describing these laws are special cases of the ideal gas law, PV = nRT, where P is the pressure of the gas, V is its volume, n is the number of moles of the gas, T is its kelvin temperature, and R is the ideal (universal) gas constant.Boyle's law is a gas law that states that a gas's pressure and volume are inversely proportional. When the temperature is kept constant, as volume increases, pressure falls and vice versa.The reduction in the volume of the gas means that the molecules are striking the walls more often increasing the pressure, and conversely if the volume increases the distance the molecules must travel to strike the walls increases and they hit the walls less often thus decreasing the pressure.The principal effect of high pressure, observed in all materials, is a reduction in volume and a corresponding shortening of mean interatomic distances.to know more about volume and pressure follow
https://brainly.com/question/5018408
#SPJ4
H₂O polar or non polar
Answer:
Water is a Polar Covalent Molecule
Water (H2O), like hydrogen fluoride (HF), is a polar covalent molecule. When you look at a diagram of water (see Fig. 3-2), you can see that the two hydrogen atoms are not evenly distributed around the oxygen atom.
Explanation:
Water (H2O), like hydrogen fluoride (HF), is a polar covalent molecule. When you look at a diagram of water (see Fig. 3-2), you can see that the two hydrogen atoms are not evenly distributed around the oxygen atom. Water is a polar molecule. While the overall charge of the molecule is neutral, the orientation of the two positively charged hydrogens (+1 each) at one end and the negatively charged oxygen (-2) at the other end give it two poles.
consider one glucose unit in glycogen. what is the overall or net reaction for the conversion of this unit into 2 pyruvate, starting with phosphorolysis of the glucose unit?
This cycle is known as Glycolysis
Glycolysis is the 10 step process, which occurs in cytoplasm of cell and is conversion of glucose to pyruvate.
There are several steps and enzymes that is required in glycolysis pathway.
STEP 1: PHOSPHORYLATION
This is irreversible reaction.
Here glucose is phosphorylated to glucose 6 phosphate with the help of enzyme hexokinase and 1 ATP is utilized.
STEP 2 : ISOMERISATION
The isomerization of Glucose-6-phosphate to Fructose-6-phosphate, done with the help of enzyme phosphoglucoisomerase.
STEP 3 : SECOND PHOSPHORYLATION
Fructose-1,6-bisphosphate is phosphorylated to Fructose 1,6 bisphosphate which is catalyzed by phosphofructokinase and cost another ATP.
STEP 4: BREAKDOWN
The fructose-1,6 bisphosphate is breaken down too produce two 3carbon molecules - Glyceraldehyde-3-phosphate, or GADP, and a molecule of Dihydroxyacetone phosphate or DHAP.
The reaction is catalyzed by aldolase.
STEP 5 : CONVERSION OF DHAP INTO GADP
DHAP is oxidized to form GADP.
The reaction is catalyzed by triose phosphate isomerase enzyme.
STEP 6: OXIDATION
Here 2 mol. of GADP are oxidized.The GDAP is converted to 1,3 bisphosphoglycerate with the help of glyceraldehyde phosphate dehydrogenase. This requires NAD+ and a free phosphate.
STEP 7: DEPHOSPHORYLATION
First substrate level phosphorylation ( addition of phosphate to ADP to give ATP )
1,3 bisphosphoglycerate with the help of Phosphoglycerate kinase become 3-phosphoglycerate and will produce 1 ATP.
STEP 8: PHOSPHATE TRANSFER
The phosphate ester linkage in 3 phosphoglycerate is moved from 3 C to 2 , because of low free energy to form 2 phosphoglycerate with the help of phosphoglycerate mutase .
STEP 9: DEHYDRATION
2 phopshoglycerate is dehydrated by enolase to form Phosphoenolpyruvate ( PEP)
This is reversible reaction.
STEP 10: SECOND DEPHOSPHORYLATION
2 substrate level phosphorylation which gives out ATP.
Non - oxidative phosphorylation.
Here Phosphoenolpyruvate ( PEP) is converted to last product of glycolysis pyruvate releasing ATP by pyruvate kinase.
The first five step is production of GADP, And usage of ATP and the next five steps are the formation of ATP and pyruvate. The net formation of ATP is 2 mol. of ATP and 2 mol. of NADH. This pyruvate then move to the TCA cycle.
To know more about glycolysis -
https://brainly.com/question/26990754
#SPJ4
What is like the mitochondria?
O Excretory system
Digestive system
O Nervous system
O Skeletal System
Answer:
digestive system
.
Explanation:
Complete the notation configuration for Neon.
The electronic configuration of an element represent the filling of electrons in various orbitals or subshells. The configuration of the element neon is 1s² 2s² 2p⁶.
What is neon?Neon is 10th element in periodic table. It is a noble gas also called an inert gas since the inert gas group that is group 18 gases are commonly unreactive. The group members are neon, argon, krypton, xenon and radon.
The elements in group 18 have the general electronic configuration for valence electrons ns² np⁶. Therefore, they have a completely filled orbital and attained octet which means they are all highly stable.
Neon have 10 electrons and these electrons are arranged in orbitals in the increasing order of energy levels. Thus its electronic configuration is 1s² 2s² 2p⁶.
To find more on neon, refer the link :
https://brainly.com/question/25174831
#SPJ1
calculate the theoretical yield of all products when 18.9 grams of lithium phosphate reacts with excess gold (i) acetate
The yield of products formed is:
gold phosphate equals 111.93 grams and the yield of lithium acetate 32.30 grams.
This theoretical yield can be calculated as:
Molar masses of reactants and products that they need. lithium phosphate equals 115.79 grams per mole. Mass of gold phosphate equals 685.87 grams per mole and the molar mass of lithium acetate equals 65.98 grams per mole. Using number of moles and mass of substance produced we can calculate the products formed.
To know more about theoretical yield, click here,
brainly.com/question/25996347
#SPJ4
what is the minimum light-photon energy that can dissociate a hydrogen molecule? express your answer to one significant figure and include the appropriate units.
The lowest energy of a light-photon that may split a hydrogen molecule is 7*10-19J. The energy of a quantum of light is known as a photon. Light is both a wave and a particle, according to its dual nature.
The light-photon or quanta of light are other names for the light particle. The most basic molecule is a hydrogen molecule. Electrostatic forces hold together its two protons and two electrons, which are bound together. The assemblage can exist at various energies, similar to atomic hydrogen. both para- and orthohydrogen. The energy that is equal to the minimum amount of light-photon energy is equal to the bond energy of the hydrogen molecule molecule, according to the energy diagram of hydrogen as a function of atomic separation.
Light photon energy at the minimum is 7*10-19 J.
Learn more about hydrogen molecule here
https://brainly.com/question/22549256
#SPJ4
why should reflux of the micro-scale reaction be gentle, with the condensation ring remaining close to the surface of the liquid in the test tube?
The reflux of the micro-scale reaction should be gentle because since solvents are present in small quantities, the reaction might dry up and burn.
What is reflux?
Reflux can be analogous to distillation. The condenser is present in reflux. The solvent boils and gets condensed back to the same flask. The equipment for reflux are RB flask, heat source, condenser and a water bath.
In reflux reactions, the micro-scale reactions use very small amount of solvents and reagents as the name suggests. During the reaction some solvent might boil and leave the reaction vessel. Then the solvent molecules condense below. Higher the condensation ring, lesser solvent present in the reaction.
Therefore, during reflux reactions, the reaction might dry up and burn since the solvent condenses and only few molecules of solvent are present in the reaction mixture. So, the reaction needs to be gently done.
To learn more about reflux reactions click on the given link https://brainly.com/question/15185307
#SPJ4
which of the following best summarizes the composition of hydrocarbon molecules in this outcrop of tar sand? choose one: a. small, simple hydrocarbon molecules b. moderate-length chain hydrocarbon molecules c. large, complex chain hydrocarbon molecules
The Correct answer is A) small, simple hydrocarbon molecules the following best summarizes the composition of hydrocarbon molecules in this outcrop of tar sand.
Crude oil, natural gas, and coal all contain hydrocarbons, which are organic molecules made of hydrogen and carbon. Humans have modified them to be utilized as an energy source, such as in the production of gasoline and jet fuel.
The simplest organic molecules, hydrocarbons are composed exclusively of hydrogen and carbon atoms.
Fuel is the most significant application of hydrocarbons. Among the most widely used hydrocarbon fuels include gasoline, natural gas, fuel oil, diesel, jet fuel, coal, kerosene, and propane. Plastics and synthetic fabrics like polyester are made using hydrocarbons as well.
Read more about hydrocarbon molecules at
https://brainly.com/question/16497760
#SPJ4
A student performed the following steps in an investigation:
1. Add a few drops of red food coloring to 50 mL of water in a beaker.
2. Stir the contents of the beaker using a glass stir rod.
3. Add 20 mL of yellow vegetable oil.
4. Stir the contents of the beaker using a glass stir rod.
5. Leave the beaker undisturbed for 24 hours.
Which of the following statements about the investigation is most accurate?
A The student made a compound out of pure substances and then made a homogeneous mixture.The student made a compound out of pure substances and then made a homogeneous mixture.
B The student made a solution and then a heterogeneous mixture.The student made a solution and then a heterogeneous mixture.
C The student made a homogeneous mixture and then made a pure substance through a chemical reaction.The student made a homogeneous mixture and then made a pure substance through a chemical reaction.
D The student made a heterogenous mixture and then stirred it until it was a homogeneous mixture.The student made a heterogenous mixture and then stirred it until it was a homogeneous mixture.
The statement that is true is that; the student made a solution and then a het---erogeneous mixture.
What is true about the set up?We know that a solution is composed of a substance that dissolves in a solvent. The solution is made when the red coloring is dissolved in the water and then when we add the oil, there is now a layer that is not in phase with the rest of the solution.
The vegetable oil would then tend to separate out of the rest of the solution and then form a het--erogenous mixture. We can be able to have the two of them come together by stirring the mixture for some time.
Learn more about mixture:https://brainly.com/question/24898889
#SPJ1
How many atoms thick is graphene?
One atom thick film of carbon known as graphene is 200 times stronger than steel and one hundred times thinner than a sheet of paper.
How thick is a graphene atom?1 atom thick
Pure carbon atoms are arranged in a hexagonal lattice in a single layer to form graphene, which is held together by sp2 bonds. Graphite is composed of layers of graphene. The thinnest material known to exist is graphene, which measures one atom thick (0.345Nm). Actually, it is two-dimensional.
A hexagonal honeycomb lattice securely holds a single layer (monolayer) of carbon atoms together to form graphene. It is an allotrope of carbon with sp2-bonded atoms arranged in a plane and a molecular bond length of 0.142 nanometers.
To know more about atom visit:
https://brainly.com/question/1566330
#SPJ13
Determine the number of valence electrons and what the atoms charge will be when it forms an ion
A. O
B. As
C.N
D.AI
E.K
Please leave instructions.
The valence electron on O = 6, As = 5, N = 5, Al = 3, K = 1
Valence electrons are the electrons in the outermost shell, or energy level, of an atom. For example, oxygen has six valence electrons, two in the 2s subshell and four in the 2p subshell. We can write the configuration of oxygen's valence electrons as 2s²2p⁴.
Similarly we can see that the outermost orbit in As is 4[tex]s^{2}[/tex]4[tex]p^{3}[/tex] hence it has 5 valence electron and the charge on Arsenic ion is +5.
The outermost orbit in N is 2[tex]s^{2}[/tex]2[tex]p^{3}[/tex] hence it has 5 valence electron and the charge on Nitrogen ion is 3-
The outermost orbit in Al is 3[tex]s^{2}[/tex]3[tex]p^{1}[/tex] hence it has 3 valence electron and the charge on Aluminum ion is 3+
The outermost orbit of K is 4[tex]s^{1}[/tex] hence it has 1 valence electron and the charge on Potassium ion is 1+
To know more about valence electrons
https://brainly.com/question/18690146
#SPJ1
molecular hydrogen effuses 4.0 times as fast as gas x at the same temperature. what is the molar mass of gas x?
The molar mass of gas x is 2.0g/mol.
Solution:
Molecular hydrogen effuses four times as fast as gas x at the same temperature
Oxygen is diatomic (O2)
Oxygen's molar mass = 32.0 g/mol.
Certain Gas = fast/light and Oxygen = slow/heavy
Set rate expression equal to the molar mass expression
[tex]\frac{4}{1}[/tex] = [tex]\sqrt{\frac{32}{x} }[/tex]
X = 2.0g/mol
Moles do not change with temperature because temperature affects volume, not mass. When a liquid or gas is heated, the molecules move faster, collide and spread. Since the molecules are distributed, they occupy more space. they are less dense. The opposite happens when a liquid or gas cools.
As the kinetic energy of the molecules in the gas increases, an increase in temperature causes the gas to expand, thus increasing in volume. When the same number of gas molecules occupy more volume, the density of air decreases. Volume is simply defined as the amount of space occupied by a three-dimensional solid.
Learn more about The molar mass here:-https://brainly.com/question/837939
#SPJ4
if the mass of agno3 is 5,3g per spoon. calculate the concentration of the solution after two spoons have been added
Assuming the solution is taken in 1 L volume so that the number of moles of AgNO₃ with 10.6 g or two spoon is 0.062 moles. Thus the concentration of the solution is 0.06 molar.
What is molarity?Molarity of a solution is the ratio of its number of moles of solute to the volume of solution in liters. Molarity is a temperature dependent quantity. This is the most common term for concentration of a solution.
The molar mass of AgNO₃ is 169.9 g/mol. One tea spoon silver nitrate is 5.3 g thus, two tea spoon is 10.6 g. The number of moles of 10.6 AgNO₃
= mass/weight
= 10.6 g / 169.9 g/mol
= 0.062 moles.
Thus the concentration of 0.062 moles in 1 L solution is 0.062 molar.
To find more on molarity, refer here:
https://brainly.com/question/8732513
#SPJ1
at 1 atm pressure the heat of sublimation of gallium is 277 kj/mol and the heat of vaporization is 271 kj/mol. how much heat is required to melt 0.500 mol of gallium at 1.00 atm pressure?
At 1 atm pressure the heat of sublimation of gallium is 277 kJ/mol and the heat of vaporization is 271 kJ/mol. heat is required to melt 0.500 mol of gallium at 1.00 atm pressure is 3 kJ.
The data given as follows :
The heat of sublimation of gallium = 277 kJ/mol
The heat of vaporization = 271 kJ/mol
The difference between the heat of sublimation of gallium and the heat of vaporization is given as :
ΔH = heat of sublimation - heat of vaporization
ΔH = 277 kJ/mol - 271 kJ/mol
ΔH = 6 kJ/mol
The heat required = n ΔH
= 0.500 × 6
= 3 kJ
Thus, At 1 atm pressure the heat of sublimation of gallium is 277 kJ/mol and the heat of vaporization is 271 kJ/mol. heat is required to melt 0.500 mol of gallium at 1.00 atm pressure is 3 kJ.
To learn more about heat of sublimation here
https://brainly.com/question/12999750
#SPJ4
A chemist burns isopropyl alcohol (C3H8O) according to the following equation: C3H8O + 3 O2 → 3 CO + 4 H2O If he burns 275 grams of C3H8O in excess oxygen, how many grams of water will be made?
Answer:
329.8g of H2O are produced
Explanation:
You have to do stoichiometry to convert grams of isopropyl alcohol to grams of water.
Convert grams of isopropyl alcohol to moles of isopropyl alcohol (use molar mass of isopropyl alcohol) Convert this to moles of water using molar coefficients Convert moles of water to grams (use molar mass of water)What will you do if a polyatomic ion is included in the ionic formula
The number of ionic compounds grows dramatically
what is polyatomic ion?
A polyatomic ion, also referred as a molecular ion, is a covalently bound set of two or more atoms or a metal complex that behaves as a single unit and has a net charge that is more than zero. Depending on the meaning, the phrase molecule may or may not be used to describe to a polyatomic ion. In Greek, the word poly- means "many," however even ions of two atoms are generally marked as polyatomic.
when polyatomic ions are added. Polyatomic ions are present in the majority of ionic substances. Sodium hydroxide (NaOH), which includes the polyatomic anion OH-, calcium carbonate (CaCO3), and ammonium nitrate (NH4NO3), which contains two polyatomic ions: NH+ and NO3-, are well-known examples.
The following table contains a list of the more significant polyatomic ions, which may be used as a reference when studying about polyatomic ion charges. A large number of them are oxyanions (polyatomic ions that contain oxygen)
Charge Name Formula
-3 Phosphate PO43-
Arsenate AsO43-
-2 Carbonate CO32-
Peroxide O22-
To learn more about polyatomic ion follow the given link: https://brainly.com/question/13659069
#SPJ1
Two magnets push away from
each other and do not attract.
What do we know to be true and
what type of force is being
demonstrated?
write 2 or more sentences
When two magnets are repelling each other, the following are true:
They are faced each with similar poles (negative + negative or positive + positive).When two magnets are placed with similar poles, the lines of force are in opposing directions and must repel one another.What are magnets?
A magnet is a substance or item that generates a magnetic field. This magnetic field is invisible, but it is responsible for a magnet's most remarkable property: a force that attracts or repels other ferromagnetic elements such as iron, steel, nickel, cobalt, and so on.
Magnets are classified into three types: perpetual magnets, temporary magnets, and electromagnets. Permanent magnets produce a magnetic field without requiring any external magnetism or electrical power.
Learn more about magnets:
https://brainly.com/question/2841288
#SPJ1
what happens when hydrogen peroxide is added to a catalase-positive culture? what is the appearance of the catalase-negative culture when hydrogen peroxide is added?
When hydrogen peroxide is added to catalase positive culture, there is a formation of bubbles of oxygen. When hydrogen peroxide is added to catalase negative culture, there is no formation of bubbles. This is called catalase test.
What is catalase test?
Catalase test determines if the catalase enzyme is present. Catalase enzyme catalyses the release of oxygen gas from hydrogen peroxide, when it is added to it. There is also formation of water by catalase enzyme.
When hydrogen peroxide is added to catalase positive culture, the catalase enzyme in it releases the oxygen gas from hydrogen peroxide in the form of bubbles. In the catalase negative culture, there is no catalase enzyme to release oxygen. This is called catalase test.
Therefore, in the catalase test, if the hydrogen peroxide is added to catalase positive culture there is a formation of bubbles due to the release of oxygen. In the absence of catalase enzyme there is no formation of bubbles due to the absence of oxygen gas.
To learn more about catalase test click on the given link https://brainly.com/question/13063218
#SPJ4
Write the balanced neutralization reaction that occurs between h2so4 and koh in aqueous solution. Phases are optional.
The equilibrium equation for the neutralization reaction between H2SO4 and KOH in aqueous solution is
[tex]H_2SO_4 + 2KOH= > K_2SO_4 +H_2O[/tex]
Neutralization is a chemical reaction in which acids and bases react quantitatively with each other. When reacted in water, the neutralization effect works because there is no excess hydrogen or hydroxide ions in the solution.
A neutralization reaction is when an acid and a base react to form a salt with water, and H+ and OH ions mix to form water. Neutralizing strong acids and strong bases results in a pH of 7.
The reaction between an acid and a base is called a neutralization reaction, which can be thought of as a kind of substitution reaction in which the protons of an acid are replaced while being given to another species.
Learn more about neutralization here: brainly.com/question/203541
#SPJ4