A string with both ends held fixed is vibrating in its third harmonic. The waves have a speed of 193 m/s and a frequency of 235 Hz . The amplitude of the standing wave at an antinode is 0.380 cm.
A) Calculate the amplitude at a point on the string a distance of 18.0 cm from the left-hand end of the string.
B) How much time does it take the string to go from its largest upward displacement to its largest downward displacement at this point?
C) Calculate the maximum transverse velocity of the string at this point.
D) Calculate the maximum transverse acceleration of the string at this point.

Answers

Answer 1

Answer:

A. We know that amplitude at x is

Asin (kx)

But k= 2πf/v

k= 2*3.132*235/193= 7.65

So A = 0.35*sin( 7.65x 0.18)= 0.00841m

C

Vmax = Amplitude x angular velocity

= 0.0084 x 2πf

= 0.0084* 2*3.142* 235= 12.4m/s

D. Maximum acceleration = omega² x Amplitude

= (2πf)²* 0.00841= 183.40m/s²


Related Questions

A baseball has a mass of about 155 g. What is the magnitude of the momentum of a baseball thrown at a speed of 86 miles per hour

Answers

Answer:

Magnitude of the momentum (P) = 5.96 Kg.m /s (Approx)

Explanation:

Given:

Mass of baseball (m) = 155 gram = 0.155 kg

Velocity (v) = 86 miles/ hour

Find:

Magnitude of the momentum (P)

Computation:

1 mile = 1,609.344 meters

So,

Velocity (v) = 86 × (1,609.344 / 3600)

Velocity (v) = 38.45 m/s

Magnitude of the momentum (P) = mv

Magnitude of the momentum (P) = (0.155)(38.45)

Magnitude of the momentum (P) = 5.96 Kg.m /s (Approx)

Find the angles of the first three principal maxima above the central fringe when this grating is illuminated with 672 nm light.

Answers

Complete Question

A grating has 767 lines per centimetre.Find the angles of the first three principal maxima above the central fringe when this grating is illuminated with 672 nm light.

Answer:

The  first is  

      [tex]\theta_1 = 2.92^o[/tex]

 The second is  

       [tex]\theta _2 = 5.93^o[/tex]

 The third is  

        [tex]\theta _3 = 8.92^o[/tex]

Explanation:

From the question we are told that

        The  number of lines per cm is  [tex]I = 767 \ lines/cm = 76700 \ lines / m[/tex]

        The  wavelength is  [tex]\lambda = 672nm = 672 *10^{-9} \ m[/tex]

       

Generally the condition for constructive  interference is  

            [tex]dsin (\theta ) = n\lambda[/tex]    

Here d is the distance of separation of the slit which is mathematically represented as

             [tex]d = \frac{1}{l}[/tex]

             [tex]d = \frac{1}{76700}[/tex]

             [tex]d = 1.30*10^{-5} \ m[/tex]

So          

           [tex]\theta_1 = sin^{-1} [\frac{ n \lambda }{ d} ][/tex]

For the  first angle  n =  1  

  So  

        [tex]\theta_1 = sin^{-1} [\frac{ 1 * 672 *10^{-9} }{ 1.30 *10^{-5}} ][/tex]

          [tex]\theta_1 = 2.92^o[/tex]

For  the second angle  n  =  2

      So  

            [tex]\theta_2 = sin^{-1} [\frac{ 2 * 672 *10^{-9} }{ 1.30 *10^{-5}} ][/tex]

            [tex]\theta _2 = 5.93^o[/tex]

For  the second angle  n  =  3

      So  

           [tex]\theta_3 = sin^{-1} [\frac{ 3 * 672 *10^{-9} }{ 1.30 *10^{-5}} ][/tex]

          [tex]\theta _3 = 8.92^o[/tex]

         

Two asteroids identical to those above collide at right angles and stick together; i.e, their initial velocities were perpendicular to each other (take A initially moving to the right and B initially moving up). Use momentum conservation (make a complete Momentum Chart) to find the velocity (magnitude and direction with-respect-to the velocity asteroid A had before the collision) of the asteroids after the collision.

Answers

Answer:

velocity = 62.89 m/s  in 58 degree measured from the x-axis

Explanation:

Relevant information:

Before the collision, asteroid A of mass 1,000 kg moved at 100 m/s, and asteroid B of mass 2,000 kg moved at 80 m/s.

Two asteroids moving with velocities collide at right angles and stick together. Asteroid A initially moving to right direction and asteroid B initially move in the upward direction.

Before collision Momentum of A = 1000 x 100 = [tex]$ 10^5$[/tex] kg - m/s in the right direction.

Before collision Momentum of B = 2000 x 80 = 1.6 x [tex]$ 10^5$[/tex]  kg - m/s in upward direction.

Mass of System of after collision = 1000 + 2000 = 3000 kg

Now applying the Momentum Conservation, we get

Initial momentum in right direction = final momentum in right direction = [tex]$ 10^5$[/tex]

And, Initial momentum in upward direction = Final momentum in upward direction = 1.6 x [tex]$ 10^5$[/tex]

So, [tex]$ V_x = \frac{10^5}{3000} $[/tex]  = [tex]$ \frac{100}{3} $[/tex]  m/s

and [tex]$ V_y=\frac{160}{3}$[/tex]  m/s

Therefore, velocity is = [tex]$ \sqrt{V_x^2 + V_y^2} $[/tex]

                                   = [tex]$ \sqrt{(\frac{100}{3})^2 + (\frac{160}{3})^2} $[/tex]

                                   = 62.89 m/s

And direction is

tan θ = [tex]$ \frac{V_y}{V_x}$[/tex]     = 1.6

therefore, [tex]$ \theta = \tan^{-1}1.6 $[/tex]

                   = [tex]$ 58 ^{\circ}$[/tex]  from x-axis

What is the strength of the electric field 0.1 mmmm below the center of the bottom surface of the plate

Answers

Complete Question

A thin, horizontal, 12-cm-diameter copper plate is charged to 4.4 nC . Assume that the electrons are uniformly distributed on the surface. What is the strength of the electric field 0.1 mm above the center of the top surface of the plate?

Answer:

The  values is  [tex]E =248.2 \ N/C[/tex]

Explanation:

From the question we are told that

   The  diameter is  [tex]d = 12 \ cm = 0.12 \ m[/tex]

    The charge  is  [tex]Q = 4.4 nC = 4.4 *10^{-9} \ C[/tex]

    The  distance from the center  is  [tex]k = 0.1 \ mm = 1*10^{-4} \ m[/tex]

Generally the radius is mathematically represented as

        [tex]r = \frac{d}{2}[/tex]

=>     [tex]r = \frac{0.12}{2}[/tex]

=>       [tex]r = 0.06 \ m[/tex]

Generally electric field is mathematically represented as  

       [tex]E = \frac{Q}{ 2\epsilon_o } [1 - \frac{k}{\sqrt{r^2 + k^2 } } ][/tex]

substituting values  

      [tex]E = \frac{4.4 *10^{-9}}{ 2* (8.85*10^{-12}) } [1 - \frac{(1.00 *10^{-4})}{\sqrt{(0.06)^2 + (1.0*10^{-4})^2 } } ][/tex]

     [tex]E =248.2 \ N/C[/tex]

1. A paper pinwheel is spinning in the wind. Which statement is correct about the forces responsible for the rotation?

The components of gravity and the force of wind that point through the pivot are responsible for the rotation.

Only the perpendicular component of wind is responsible for the rotation, because gravity points downward.

Only the perpendicular component of gravity is responsible for the rotation, because wind points toward the pivot. <- MY ANSWER

The perpendicular components of gravity and the force of wind are responsible for the rotation.

2. Which statement about kinetic and static friction is accurate?

Static friction is greater than kinetic friction, but they both act opposite the applied force.

Static friction is greater than kinetic friction, and they both act in conjunction with the applied force.

Kinetic friction is greater than static friction, but they both act opposite the applied force.

Kinetic friction is greater than static friction, and they both act in conjunction with the applied force.

3. A group of engineers is preparing a satellite to land by moving it 10% closer to Earth in each rotation. Which statement is correct about the rotational inertia of the satellite?

Rotational inertia decreases proportional to the decrease in the radius of rotation.

Rotational inertia increases proportional to the decrease in the radius of rotation. <- MY ANSWER

Rotational inertia first decreases and then increases as the satellite is ready to land.

Rotational inertia does not change because it is conserved.

4. In the experimental setup shown (see image attached), a car has one end of a string attached to it. The other end of the string has a hanger on which metal discs can be added or removed. The car moves along the table, and two photogate probes sense the motion of the car. The probes send information to a computer that displays the experimental results.
Which quantity is being held constant in this experiment?

mass
force
acceleration
velocity <- MY ANSWER

Answers

Answer:

1) Only the perpendicular component of wind is responsible for the rotation, because gravity points downward.

2) static friction is greater than kinetic friction and the applied force acts oppositely

3)   Inertia decreases with decreasing radius of the orbit.

4) constant is the mass of the car

Explanation:

1) In order to know which statement is correct, let's analyze the movement of the mill.

The rotation of the blades due to a force perpendicular to each one, which creates a torque that results in its rotation.

The true force does not affect the movement because it is applied at the center of mass of the mill that coincides with its axis of rotation.

Of the statements, the correct one is:

The perpendicular to the wind is responsible for the movement

2) static friction is the result of microscopic bonds between two surfaces when there is no relative motion between them

kinetic friction is the result of the unions between the two surfaces when there is a relative movement between them.

From these statements it follows that friction is contrary to motion, static friction must be greater than kinetic friction.

Of the statements the correct one is:

static friction is greater than kinetic friction and the applied force acts oppositely

3) The inertia of a particle is

         I = m R²

where m is the mass of the satellite and R is the distance from the center of the Earth, decreasing with each orbit

           

The correct answer is:

  Inertia decreases with decreasing radius of the orbit.

4) From the figure it can be seen that the motorist subjected to a constant force, for which we can apply Newton's second law

          F = m a

The force equals the applied weight.

The quantity that is held constant is the mass of the car

since the applied force and therefore the acceleration can be changed by changing the applied weight.

Answer:

1. The perpendicular components of gravity and the force of wind are responsible for the rotation.  

2. Static friction is greater than kinetic friction, but they both act opposite the applied force.

3. Rotational inertia decreases proportional to the decrease in the radius of rotation.

4. mass

Two scientist did the same experiment but arrived at different results.the results would most likely

Answers

Answer:

provide new testble ideas

Asteroid X orbits moon XYZ with a speed of 500m/s and a centripetal force of 1500N. Asteroid X, Y and Z all have the same mass. If asteroid Y orbits moon XYZ with the same orbital radius as asteroid X but at a speed of 100m/s. What is the centripetal force acting acting on asteroid Y? If asteroid Z orbits moon XYZ with a speed of 1500m/s but on orbital radius that is half of asteroid X, what is the centripetal force acting asteroid Z? ​

Answers

Answer this question

Explanation:

On a straight road (taken to be in the x direction) you drive for an hour at 60 km per hour, then quickly speed up to 120 km per hour and drive for an additional two hours. What is your average x component of velocity

Answers

Answer:

The average velocity is 180 km/hr

Explanation:

Given;

initial velocity, u = 60 km per hour

final velocity, v = 120 km per hour

initial time = 1 hour

final time = 2 hour

Initial position = 60 km/h x 1 hour = 60 km

final position = 120 km/h x 2 hour = 240 km

The average velocity is given by;

[tex]V_{avg} = \frac{Final \ position\ - \ Initial \ position}{final \ time\ - \ initial \ time}\\\\V_{avg} = \frac{240km \ - \ 60km}{2hr\ - \ 1hr} \\\\V_{avg} = \frac{180 \ km}{1hr} \\\\V_{avg}= 180 \ km/hr[/tex]

Therefore, the average velocity is 180 km/hr

it is better to sell used paper then to burn them​

Answers

Answer:

Using sold paper is better than to burn it because burning paper may cause pollution.

Explanation:

Hope it will help ^_^

User paper is the correct answer

7. A local sign company needs to install a new billboard. The signpost is 30 m tall, and the ladder truck is parked 24 m away from the bottom of the post due to an uneven ravine. How long must the ladder be in order to reach the top of the signpost from the ladder truck?​

Answers

Solution :

Here ,

• Height of sign post = 30 m

• Distance between signpost and truck = 24 m

Let the

• Top of signpost = A

• Bottom of signpost = B

• The end of truck facing sign post be = C

Now as we can clearly imagine that the ladder will act as an hypotenuse to the Triangle ABC .

Where

• AB = Height of signpost = 30 m

• BC = distance between both = 24 m

• AC = Minimum length of ladder

→ AC² = AB² + BC² ( As we can see AB is perpendicular to BC )

→ AC² = (30)² + (24)²

→ AC² = 900 + 576

→ AC² = 1476

→ AC = 38.41875

or AC apx = 38.42

So minimum height of ladder = 38.42

This question can be solved by using the formula of "Pythagora's Theorem".

The ladder must be "38.42 m" long.

If we imagine the whole situation in terms of a right-angled triangle, we can safely assume the height of the billboard (which is the pole supporting the billboard) as the perpendicular of the right-angled triangle. The distance between the signpost and the truck can be assumed as the base of the triangle. The length of the ladder will then be acting as the Hypotenuse of the right-angled triangle.

The attached picture clearly depicts the condition explained in the above paragraph.

Now applying Pythagora's Theorem to this situation, we get:

[tex]Hypotenuse^2 = Perpendicular^2+Base^2\\Length\ of\ Ladder^2 = (30\ m)^2+(24\ m)^2\\L^2 = 1476\ m^2\\[/tex]

L = 38.42 m

Learn more about Pythagora's Theorem here:

https://brainly.com/question/343682?referrer=searchResults

A rock is thrown horizontally from a cliff with a speed of 15 m/s. It falls half the height of the cliff in the last three seconds of its fall.
a. What is the total fall time?
b. How high is the cliff?
c. What is the horizontal distance from the cliff when it hits the ground?

Answers

Answer:

A) 10.243 s

B) 514.64 m

C) 153.645 m

Explanation:

From projectile motion;

y(t) = h - ½gt²

Where;

h is the height of cliff

t is the time taken to fall from top of cliff down to half the height of the cliff

y(t) is height of the rock as function of time

We are told the rock falls half way of the cliff height.

Thus;

y = h/2

So;

h/2 = h - ½gt²

This gives;

h - h/2 = ½gt²

h/2 = ½gt²

h = gt² - - - - (1)

Also,the total free fall time from top of the cliff to ground would be;

T = t + 3

Thus, distance at this point is zero.

So;

0 = h - ½gT²

h = ½gT²

Putting t + 3 for T, we have;

h = (1/2)g(t + 3)² - - - 2

Inspecting eq 1 and eq 2,we have;

gt² = (1/2)g(t + 3)²

g will cancel out to give;

2t² = t² + 6t + 9

t² - 6t - 9 = 0

The roots are -1.243 or 7.243.

We will pick the positive value as time can't be negative.

Thus, T = 7.243 + 3 = 10.243 s

h = gt² = 9.81 × 7.243²

h = 514.64 m

Formula for horizontal distance is given by;

x = uT

Where u is initial speed given as;

u = 15 m/s

Thus;

x = 15 × 10.243

x = 153.645 m

Fluid flows at 2.0 m/s through a pipe of diameter 3.0 cm. What is the volume flow rate of the fluid in m^3/

Answers

Answer:

Volume flow rate = [tex]1.41 \times 10^{-3}m^3/s[/tex]

Explanation:

The volume flow rate through a channel can be gotten by multiplying its area and its velocity.

The channel under consideration is a circular channel. Hence, the cross-sectional area can be calculated by using the relation for calculating the area of a circle

Cross-sectional area = [tex]\pi \times d^{2}/4[/tex]

[tex]A = \pi \times (3\times 10^-2)^2 /4 = 7.07 \times 10 ^-4 m^2[/tex]

volume flow rate= [tex]A = 7.07 \times 10 ^-4 m^2 X 2.0 = 1.41 \times 10^{-3}m^3/s[/tex]

Volume flow rate = [tex]1.41 \times 10^{-3}m^3/s[/tex]

In physics, a field refers to a quantity that has a value for every point in a space. In a sense, a field is like a function in mathematics; the input is some point in space and the output is some object. A familiar example of a field is elevation. At every point on earth's surface, we can ask how far above or below sea level we are.
1) (Introduction) For the following physical quantities, decide which are fields and which are not. You may remember that vectors are physical quantities that have a direction (and magnitude) and scalars physical quantities that are just numbers. If you decide the quantity is a field, s it a scalar field?
a) Temperature at ground level
b) Wind velocity at 100 feet above the ground.
c) Gravitational force on Roessler Hall.
d) Height of a person in your group.
e) Height (above sea level) of the ground.
f) Slope of the surface of the earth.

Answers

Answer:

Explanation:

a ) Temperature at ground level is a field and it is scalar field .At any point in space near ground level  , the temperature is specific so it is a field .  It is scalar  because temperature has no direction .

b )

 Wind velocity at 100 feet above the ground is also a field but it is a vector field . At any point in space , the wind velocity is specific so it is a field .  It is vector   because velocity  has a particular  direction at any point .

c )

Gravitational force on Roessler Hall is a vector field because gravitational force also depends on location in space and it has direction.

d )

Height of a person in your group is not a space because it does not depend upon  location is space . It is same for all location .

e )

Height (above sea level) of the ground is a field  because it also depends upon location in space . It is scalar field .

f )

Slope of the surface of the earth is a scalar field .

If an electron emits 3 eV of energy, what is the corresponding wavelength of the emitted photon?

Answers

Answer:

The wavelength of the emitted photon is 413.6 nm

Explanation:

Given;

energy of the emitted photon, E = 3 eV = 3 x 1.602 x 10⁻¹⁹ J

speed of light, c  = 3 x 10⁸ m/s

The energy of the emitted photon is given by;

E = hf

where;

h is Planck's constant = 6.626 x 10⁻³⁴ J/s

f is the frequency of the light = c / λ

λ is the wavelength

[tex]E = \frac{hc}{\lambda}\\\\\lambda = \frac{hc}{E}\\\\\lambda = \frac{(6.626*10^{-34})(3*10^8)}{3*1.602*10^{-19}}\\\\\lambda = 4.136 *10^{-7} \ m\\\\\lambda = 413.6 *10^{-9} \ m\\\\\lambda = 413.6 \ nm[/tex]

Therefore, the wavelength of the emitted photon is 413.6 nm

three equal charges are fixed at the howdy corners of a rectangle what is the force on the top left charge from the bottom left

Answers

Answer:

Let the resultant be

A= ( C2 + B2 )1/2

So

sin = B / ( C2 + B2 )1/2

And

cos = C / ( C2 + B2 )1/2

So the total force is

F = FA + FC + FY

= - k y2 i / c2 + k y2 j / B2 + k y Q ( -cos i + sin j ) / ( C2 + B2 )

F = 0

- k y2 i / C2 + k y2 j / B2 + k y Q ( -sin i + sin j ) / ( L2 + H2 ) = 0

- k y2 i / C2 + k y2 j / B2 + k y Q ( - C / ( C2 + B2 )1/2 i + B/ ( C2+ B )1/2 j ) / ( C2 + B2 )1/2 = 0

Q = - y ( C2 + B )3/2 / C3

k y2 / B2 + k y Q B/ ( C2 + B2 )3/2 = 0

Q = -y ( C2 + b2 )3/2 / B

So equating both " Q " values

- y ( C2 + B2 )3/2 / L3 = - y( C2 + B2 )3/2 / B

so the possible length and the relationship is C= B

The graphs display velocity data Velocity is on the y-axis (m/s), while time is on the x-axis (s). Based on the graphs, which data set represents constant acceleration?​

Answers

Answer:

The first graph is showing the constant acceleration (1 m/s)

Explanation:

The second graph showing the flexible velocity therefore a in the graph is different at t1, t2, t3, t4

The last graph is showing constant velocity therefore there is no acceleration (a = 0)

Answer:

A

Explanation:

on edge

Convert the number from scientific into standard notation: 5.9 x 10-2

Answers

Move the decimal point to:
Left : (if the exponent of ten is a negative number -) ... OUR CASE HERE (-2)
or to
Right : (if the exponent is positive +).

You should move the point as many times as the exponent indicates.
Do not write the power of ten anymore.

So, standard form is:
Two points to the left {Exponent of Ten is Negative (-2)}
0.059 ... (without the 10)

What is the average velocity of a car starting from 0 and travels 7 meters in 9 seconds?

Answers

Your question has been heard loud and clear.

Averge velocity formula=  Total distance travelled / total time taken.

Total distance=7meters

Total time taken=9 seconds.

Average velocity = 7/9= 0.77 metres/second

Average velocity= 0.77m/s

Thank you.

what do we have to take note of when completing a ray diagram?

Answers

Answer:

Marked image of the top of the object

What is the threshold velocity vthreshold(water) (i.e., the minimum velocity) for creating Cherenkov light from a charged particle as it travels through water (which has an index of refraction of n

Answers

Complete Question

The  complete question is shown on the first uploaded image  

Answer:

A

   [tex]v_w = 2.256 *10^{8} \ m/s[/tex]

B

  [tex]v_e = 2.21 *10^{8} \ m/s[/tex]

C

The  correct option is  B  

Explanation:

From the question we are told that

      The refractive  index of water is  [tex]n_w = 1.33[/tex]

      The  refractive  index of ethanol is  [tex]n_e = 1.36[/tex]

       

Generally the threshold velocity for creating Cherenkov light   from a charged particle as it travels through water is mathematically evaluated as

       [tex]v_w = \frac{c}{n_w }[/tex]

Where  c is the speed of light with value  [tex]c = 3.0 *10^{8} \ m/s[/tex]

       [tex]v_w = \frac{3.0 *10^{8}}{1.33 }[/tex]

       [tex]v_w = 2.256 *10^{8} \ m/s[/tex]

Generally the threshold velocity for creating Cherenkov light   from a charged particle as it travels through water is mathematically evaluated as

            [tex]v_e = \frac{ c}{n_e }[/tex]

  =>       [tex]v_e = \frac{3.0 *10^{8}}{1.36 }[/tex]

=>          [tex]v_e = 2.21 *10^{8} \ m/s[/tex]

A 3.0kg mass tied to a string
is swirled round with a uniform
speed of 20.0mls. If the length of
the string is 40cm Find the
tension in the string ​

Answers

Answer:

[tex] \boxed{\sf Tension \ in \ the \ string \ (T) = 3 \ kN} [/tex]

Given:

Mass (m) = 3.0 kg

Uniform speed (v) = 20 m/s

Length of string (r) = 40 cm = 0.4 m

To Find:

Tension in the string (T)

Explanation:

Tension (T) is the string will be equal to centripetal force ([tex] \sf F_c [/tex]).

[tex] \boxed{ \bold{ T = F_c = \frac{m {v}^{2} }{r} }}[/tex]

Substituting value of m, v & r in the equation:

[tex] \sf \implies T = \frac{3 \times {20}^{2} }{0.4} \\ \\ \sf \implies T = \frac{3 \times 400}{0.4} \\ \\ \sf \implies T =3 \times 1000 \\ \\ \sf \implies T =3000 \: N \\ \\ \sf \implies T =3 \: kN[/tex]

[tex] \therefore[/tex]

Tension in the string (T) = 3 kN

How can Newton’s laws explain why the brain is in danger of injury when there is impact to the head? A. The brain is fixed in one place inside the skull and cannot move away from the impact. B. The brain moves inside the skull with a force equal and opposite to that of the impact. C. The blood vessels of the brain expand, so more blood flows to the brain. D. The blood vessels of the brain shrink, so less blood flows to the brain.

Answers

Answer:

B.  The brain moves inside the skull with a force equal and opposite to that of the impact.

Explanation:

Just took the test and got it correct.

Applying Newton's laws the brain is in danger of injury when an impact is made to our head because ; ( B ) The brain moves inside the skull with a force equal and opposite to that of the impact

According to Newton's law an object will continue to be at rest except a force ( impact ) acts on it. also the third law of Newton states that when two objects interact ( The brain and the impact to the head ) they apply forces of equal magnitude to each other but in opposite directions from one another.

The Impact to the head will have a direct effect on the brain because the brain will move in opposite direction to the direction of the impact and with the same magnitude which will lead to an injury to the brain because the brain is suppose to be at rest at all times and not in motion.

Hence we can conclude that Applying Newton's laws the brain is in danger of injury when an impact is made to our head because The brain moves inside the skull with a force equal and opposite to that of the impact.

Learn more : https://brainly.com/question/13532462

Which of the following situations describes static friction? a. A heavy crate standing on a rough patch of mud and is being pushed by two workers, but they cannot get it to move b. A large piano resting on a sheet of ice is being pushed by a child, but the child is not strong enough to get it to move

Answers

Answer:

A.

Explanation:

The answer is A because the weight of the crate is sitting on something rough. The roughness is going to resist anything that tries to move against it because the force being exerted by the 2 workers is not strong enough to get the crate to move out of its place on the mud since it's static.

The answer can't be B because ice is smooth and doesn't have any friction, the little girl can't move it because it's to heavy for her to move, not because there's friction acting against it.

The resistance one encounters when attempting to move a stationary object over a surface without also moving their bodies in relation to the surface is known as static friction. Thus, option A is correct.

What the best situations describes static friction?

An object cannot move down the path due to a force known as static friction. Two materials sliding over one another causes this friction. Conflict can be found everywhere around us. Consider how the ground is in contact with our feet when we walk.

When there is no relative motion between the object and the surface, a body is subjected to the effects of static friction. As a result, it can still act when the body is moving, but there shouldn't be any relative motion.

Therefore, Static friction slows the car down if the tire is moving so smoothly that the ground-contact surface is never slipping. Kinetic friction will cause the wheels to slow down if they are locked and sliding.

Learn more about Static friction here:

https://brainly.com/question/13000653

#SPJ3

A proton at location A makes an electricfield E-->1 atlocation B. A different proton, placed atlocation B, experiences a force F--->1.
If |E-->|= 300 N/C, what is |F-->1|?
|F-->1|= N
Now the proton at B is removed and replaced by alithium nucleus, containing three protons and four neutrons. Theproton at location A remains in place.
What is the magnitude of the electric force on the lithium nucleus?
|F-->Li| = N
Now the Lithium nucleus is removed, and an electron is placed atlocation B. The proton atlocation A remains in place. What is the magnitude of the electric force on the electron?
|F-->1| = N

Answers

Answer:

Explanation:

 |F-->1| =  E-->1 x charge on proton

= 300 x 1.6 x 10⁻¹⁹

Magnitude of electric force on proton

|F-->1| = 480 x 10⁻¹⁹ N .

Inside lithium nucleus , there are three protons so charge on it

= 3 x 1.6 x 10⁻¹⁹ = 4.8 x 10⁻¹⁹ C .

Magnitude of electric force on lithium nucleus

|F-->Li|  =   E-->1 x charge on lithium nucleus

= 300 x  4.8 x 10⁻¹⁹

= 1440 x 10⁻¹⁹ N .

Electron has same charge as that possessed by proton so charge on electron = 1.6 x 10⁻¹⁹ C

Magnitude of force on electron

|F-->1| =  E-->1 x charge on electron

= 300 x 1.6 x 10⁻¹⁹

=  480 x 10⁻¹⁹ N .

Galileo drops a ball from the Leaning Tower of Pisa. Consider the ball's motion from the moment it leaves his hand until a microsecond before it hits the ground. Your diagram should be vertical.

Answers

Answer:

Following are the answer to this question:

Explanation:

Galileo claims that perhaps the air resistance is due to an object falling slower. The object gradually falls under its control of free-fall gravity.  

A free-falling object is also an object, which is affected by gravity only. The object operated only by the gravitational force is considered to get into a condition of free fall and the Items, that fall free may not feel air resistance.

please find the attachment.

How many time constants must elapse if an initially charged capacitor is to discharge 90% of its stored energy through a resistor

Answers

Answer:

t = log9/10 x RC

Explanation:

Let's say initial energy is

E= 1/2Q²/C

But if 90% is discharged what will be remaining will be

E= E"/100= 1/2Q²/C

So if we divide the first by the second equation we have

Q'= Q/10

Then using

q=q0(1-e^-t /RC)

So that

Q= Q/10(1-e^-t /RC)

t/RC= log9/10

So t = log9/10 x RC

A weightlifter holds a 1,700 N barbell 1 meter above the ground. One end of a 2-meter-long chain hangs from the center of the barbell. The chain has a total weight of 800 N. How much work (in J) is required to lift the barbell to a height of 2 m

Answers

Answer:

W = 5000 J

Explanation:

Weight hold by a weightlifter is 1700 N, 1 meter above the ground.

One end of a 2-meter-long chain hangs from the center of the barbell. The chain has a total weight of 800 N.

We need to find the work is required to lift the barbell to a height of 2 m.

Total force is : 1700 N + 800 N = 2500 N

Work done in Physics is given by :

W = F×d

So,

W = 2500 N × 2 m

W = 5000 J

Hence, 5000 J of work is required to lift the barbell to a height of 2 m.

A 15.0 nC point charge is 15 m from a second point charge, and the electric force on one of them due to the other is 5.0 N. What is the magnitude of t

Answers

Answer:

t = 125 C

Explanation:

The force on a charge due to other charge is given by Coulomb's Law, as follows:

F = kq₁q₂/r²

where,

F = Electric Force = 5 N

k = Coulomb Constant = 9 x 10⁹ N.m²/C²

q₁ = magnitude of first charge = 15 nC = 1.5 x 10⁻⁸ C

q₂ = Magnitude of 2nd Charge = t = ?

r = distance between charges = 15 m

Therefore,

5 N = (9 x 10⁹ N.m²/C²)(1.5 x 10⁻⁸ C)t/(15 m)²

t = (5 N)/(0.04 N/C)

t = 125 C

[tex]\huge\underline\mathcal \pink{QUESTION:-}[/tex]

THREE DISADVANTAGES OF NUCLEAR POWER.​

Answers

Answer:

Here are some of the main cons of nuclear energy.

•Expensive to Build. Despite being relatively inexpensive to operate, nuclear power plants are incredibly expensive to build—and the cost keeps rising. ...

•Accidents. ...

•Produces Radioactive Waste. ...

•Impact on the Environment. ...

•Security Threat. ...

•Limited Fuel Supply.

[tex]\huge\underline\mathcal\pink{Answer:-}[/tex]

The nuclei of atoms contain a large amount of energy. Releasing this energy would free the world from having to use fossil fuels. There are two methods of doing this: fission and fusion.

1. Nuclear is a bad match for renewables.

2. Building nuclear power stations is very expensive.

3.There are huge costs beyond simply constructing the power stations.

4 Nuclear power stations take at least a decade to build.

[tex]\huge\red{kya \: aap \: samajhe?}[/tex]

Would hurt if u have a baby?

Answers

Answer:

yes it would.

Explanation:

It varies with the women her self and her tolerance for pain .
Other Questions
What are the subsidiaries of ViacomCBS? An experiment requires that enough SiCl2Br2 be used to yield of bromine . How much SiCl2Br2 must be weighed out? Are climate change models accurate enough for costal city infrastructure planning? f(x) = -4x - 3Evaluate f(9) + f(5)= jo is 5cm taller than Kathy.Let j=jo height.Then? =kathys height. When politicians allow federal deficits to mushroom to the point where future generations will suffer, they may be violating _____. Determine whether the variable is qualitative or quantitative. Explain your reasoning. favorite city If two separate containers A and B have the same volume and temperature, but container A has more gaseous molecules than B, then container A will have: What individual is most likely to be considered somewhat insular? a.) a football player b.) a teacher c.) a Hawaiian dancer d.) a nurse Which of these are dynamics?a. Piano, mezzo piano, forteb. Staccato, legato, marcatoc. Largo, andanted. Allegro, presto Which of these classification categories contains the most closely related group of organisms? A) domain B) genus C) family D) phylum E) kingdom What two tasks can be executed from the service console for Autonomous Databases? (Choose two.) A. Autonomous Databases monitoring for usage and query performance. B. Creating schemas. C. Creating and scaling of Autonomous Database service. D. Wizard to download connection wallet for connection from desktop tools. A light plane must reach a speed of 33 m/s for takeoff. How long a runway is needed if the constant acceleration is 3.0 m/s2 Which of the following statements is true?A. A government free of corruption is an example of a bad institution.B. Human creativity allows for existing products to improve.C. Wealthy countries tend to have fewer innovative individuals.D. Wealthy nations tend to have weak institutions. Jason states that -5.0 is not an integer because it is a decimal. Is he correct? Why or why not? A United States senator from Maine wants to find out the opinion of Maine voters on issues concerning education. The office of the senator sends out a survey to state residents who have contacted the senator in the past year. Is this sampling method random? Explain hank values creativity. which of these careers is most likely the best for him? A. truck driver B. artist C. file clerk D. roofer Rivera Company has several processing departments. Costs charged to the Assembly Department for November 2020 totaled $2,292,384 as follows. Work in process, November 1 Materials $78,900 Conversion costs 48,300 $127,200 Materials added 1,598,460 Labor 225,200 Overhead 341,524 Production records show that 35,200 units were in beginning work in process 30% complete as to conversion costs, 663,700 units were started into production, and 25,900 units were in ending work in process 40% complete as to conversion costs. Materials are entered at the beginning of each process.Required:a. Determine the equivalent units of production and the unit production costs for the Assembly Department.b. Determine the assignment of costs to goods transferred out and in process.c. Prepare a production cost report for the assembly dept. The word marries illustrates an inflection to a verb which includes a spelling change to the base word. True or false? What is the smallest integer greater than the square root of 22