Answer:
a. Ca₃(PO₄)₂.
b. 0.010 moles of Ca₃(PO₄)₂ can we expect to be produced
c. 3.1g of Ca₃(PO₄)₂
d. Percent yield = 93.5%
Explanation:
a. Based on the reaction:
3Ca(NO₃)₂(aq) + 2Na₃PO₄(aq) → Ca₃(PO₄)₂(s) + 6NaNO₃(aq)
3 moles of calcium nitrate reacts with 2 moles of sodium phosphate producieng 1 mole of calcium phosphate.
As you can see, Ca₃(PO₄)₂ is a solid product -(s)-, that means when the reaction occurs the precipitate produced is the solid,
Ca₃(PO₄)₂b. As 3 moles of calcium nitrate produce 1 mole of calcium phosphate and there are 0.030 moles of calcium nitrate
0.030 moles Ca(NO₃)₂ × (1 mol Ca₃(PO₄)₂ / 3 moles Ca(NO₃)₂) =
0.010 moles of Ca₃(PO₄)₂ can we expect to be producedc. As molar mass of Ca₃(PO₄)₂ is 310.18g/mol, the mass of 0.010 moles (The expected mass) is;
0.010 moles Ca₃(PO₄)₂ × (310.18g / mol) =
3.1g of Ca₃(PO₄)₂d. The percent yield is defined as 100 times the ratio between the obtained yield (That is 2.9g of precipitate, Ca₃(PO₄)₂) and the expected yield, 3.1g of Ca₃(PO₄)₂:
[tex]\frac{2.9g}{3.1g} *100[/tex]
Percent yield = 93.5%(a) The product in solid state would be the precipitate. Hence, the precipitate would be Ca3(PO4)2
(b) From the balanced equation of the reaction: 3 moles of Ca(NO3)2 is required for 1 mole of Ca3(PO4)2
If there are just 0.030 moles of Ca(NO3)2, then"
3 moles = 1
0.030 moles = 1 x 0.030/3
= 0.01 moles of Ca3(PO4)2
In other words, 0.01 moles of the precipitate would be expected to be produced from 0.030 moles of calcium nitrate.
(c) 0.01 moles solid (Ca3(PO4)2) is expected. Mass of Ca3(PO4)2 expected:
mass = mole x molar mass
molar mass of Ca3(PO4)2 = 310.18 g/mol
mass of Ca3(PO4)2 expected to be produced = 0.01 x 310.18
= 3.1018 g
Hence, 3.1018g of solid is expected to be produced.
(d) Percentage yield = actual yield/theoretical yield x 100
= 2.9/3.1018 x 100
= 93.5%
More on precipitation reaction can be found here: https://brainly.com/question/24158764
The two common properties of all solids are fixed _____ and _____.
Answer:
shape
volume
Hope this helps! （づ￣3￣）づ╭❤～
Explanation:
When 1604 J of heat energy is added to 48.9 g of hexane, C6H14, the temperature increases by 14.5 ∘C. Calculate the molar heat capacity of C6H14.
Answer:
THE MOLAR HEAT CAPACITY OF HEXANE IS 290.027 J/ C
Explanation:
1604 J of heat is added to 48.9 g of hexane
To calculate the molar heat capacity of hexane, it is important to note that the molar heat capacity of a substance is the measure of the amount of heat needed to raise 1 mole of a substance by 1 K.
Since 1604 J of heat = 48.9 g of hexane
Molar mass of hexane = 86 g/mol = 1 mole
then;
1604 J = 48.9 g
x = 86 g
x = 1604 * 86 / 48.9
x = 4205.4 J
Hence, 4205.4 J of heat will be added to 1 mole or 86 g of hexane to raise the temperature by 14.5 C.
In other words,
heat = molar heat capacity * temperature change
molar heat capacity = heat/ temperature change
Molar heat capacity = 4205.4 J / 14.5 C
Molar heat capacity = 290.027 J/C
The molar heat capacity of hexane is 290.027 J/ C
A compound is found to contain 11.21 % hydrogen and 88.79 % oxygen by mass. What is the empirical formula for this compound?
Answer:
H₂O
Explanation:
The empirical formular of the compound is obtained using the following steps;
Step 1: Divide the percentage composition by the atomic mass
Hydrogen = 11.21 / 1 = 11.21
Oxygen = 88.79 / 16 = 5.55
Step 2: Divide by the lowest number
Hydrogen = 11.21 / 5.55 = 2.02 ≈ 2
Oxygen = 5.55 / 5.55 = 1
This means the ratio of the elements is 2 : 1
The empirical formular (simplest formular of a compound) of the compound is;
H₂O
Answer:Empirical formula ======== H₂O
Explanation:The empirical formula of a compound shows the whole number ratio for each atom in a compound.
To find empirical formula. we follow the below steps
The total mass of the compound here is 100 grams, that is (11.21% of hydrogen + 88.79% of oxygen) we can then assume 11.21 grams of hydrogen and 88.79grams of oxygen
Hydrogen Oxygen
1.composition by mass 11.21 88.79
molecular weight 1.007g/mol 15.990g/mol
2.Divide composition by mass 11.21/1.007 88.79/15.99
by each molecular weight to get 11.13 5.553
no of moles
3 Divide by the least number of moles
to get atomic ratio 11.13/5.553 5.553/5.553
2.004 1.00
4.Convert to whole numbers 2 1
Empirical formula ======== H₂O
What is the concentration of A after 50.7 minutes for the second order reaction A → Products when the initial concentration of A is 0.250 M? (k = 0.117 M⁻¹min⁻¹)
Answer:
0.101 M
Explanation:
Step 1: Given data
Initial concentration of A ([A]₀): 0.250 MFinal concentration of A ([A]): ?Time (t): 50.7 minRate constant (k): 0.117 M⁻¹.min⁻¹Step 2: Calculate [A]
For a second-order reaction, we can calculate [A] using the following expression.
1/[A] = 1/[A]₀ + k × t
1/[A] = 1/0.250 M + 0.117 M⁻¹.min⁻¹ × 50.7 min
[A] = 0.101 M
Identify a homogeneous catalyst. Identify a homogeneous catalyst. Pd in H2 gas N2 and H2 catalyzed by Fe SO2 over vanadium (V) oxide Pt with methane H2SO4 with concentrated HCl
Answer:
H2SO4 with concentrated HCl
What are the correct half reactions for the following reaction: Cu2+ + Mg -> Cu + Mg2+
Answer:
Cu2 + 2Mg-> 2Cu+ Mg2
Explanation:
Balance the equation and make sure both the reactant and the products are the same
Hope it will be helpful
[tex]Cu^{+2} + 2Mg[/tex] -> [tex]2Cu + Mg^+2[/tex] is the correct half-reactions.
What is a balanced equation?A balanced equation is an equation for a chemical reaction in which the number of atoms for each element in the reaction and the total oxidation numbers is the same for both the reactants and the products.
[tex]Cu^{+2} + 2Mg[/tex] -> [tex]2Cu + Mg^+2[/tex] is the correct half-reactions.
Magnesium is oxidized because its oxidation state increased from 0 to +2 while Cu is reduced because its oxidation state decreased from +2 to 0.
Learn more about balanced equations here:
brainly.com/question/15052184
#SPJ5
What is the initial temperature (°C) of a system that has the pressure decreased by 10 times while the volume increased by 5 times with a final temperature of -123°C?
Answer:
27°C or 300K
Explanation
We were told that the pressureof the system decreased by 10 times implies that P2= P1/10
Where P2=final pressure
P1= initial pressure
Wew were also told that the volume of the system increased by 5 times this implies that V2= 5×V1
Where T2= final temperature =-123C= 273+(-123C)=150K
T1= initial temperature
But from gas law
PV=nRT
As n and R are constant
P1V1/T1 = P2V2/T2
T1= P1V1T2/P2V2
T1=2×T2
T1=2×150
T1=300K
=300-273
=27°C
the initial temperature (°C) of a system is 27°C
An unknown gas diffuses 5 times slower than that of H2.The moleculer mass of unknown gas is??
Answer:
50.
Explanation:
We can write Graham's Law of Diffusion as:
(Rate 1)^2 = Molecular Mass 2
-------------- -------------------------
(Rate 2)^2 Molecular Mass 1
So using the Given Information:
1^2 / (1/5)^2 = Molecular Mass of unknown gas / 2, so:
25 = M/2
M = 50.
The valves in the heart open and close to move blood in between heart chambers. O a) three directions O b) two directions O c) four directions d) one direction
Answer:
im not sure but i think its four directions
Hi,
The valves in the heart open and close to move blood in between heart chambers.
Answer:
d) one direction
oxide. b) Silicon dio
43. What is the nature of an enzyme?
a) Vitamin. b) Lipid. c) Carbohydrate. d) Protein
44. Name the enzyme which catalyzes the oxidation-reduction reaction?
a) Transaminase. b) Glutamine synthetase. c) Phosphofructokinase. d) Oxidoreductase
nontido
Answer:
43) protein
44) oxidoreductase
Name the following alkane molecule:
Br
CI
A. 6-bromo-2-chlorodecane
B. 2-chloro-6-bromodecane
C. 5-bromo-9-chlorodecane
Answer:
6- bromo- 2-chlorodecane
The name of molecule is 6- bromo- 2-chlorodecane.
What is 6- bromo- 2-chlorodecane?
It is organic molecule. There are 10 carbon present in this molecule. The bromine atom is attached with C-6 carbon where chlorine is attached with C-2 carbon.
What is molecule?A molecule is a collection of more than one atom bound together by chemical bonds; depending on the context, the phrase may or may not include ions that meet this requirement.
Therefore, the name of the given molecule will be 6- bromo- 2-chlorodecane
To know more about molecule and 6- bromo- 2-chlorodecane.
https://brainly.com/question/19922822
#SPJ2
An SN2 reaction is a type of _____________ in which the nucleophile attacks the electrophile.
Answer:
A bimolecular nucleophilic substitution (SN2) reaction is a type of nucleophilic substitution whereby a lone pair of electrons on a nucleophile attacks an electron deficient electrophilic center and bonds to it, resulting in the expulsion of a leaving group.
clacium hydroxide is slightly soluable in water about 1 gram will dissolve in 1 liter what are the spectator ions in the reaction ions in the reaction of such a dilute solution of calcium hydroxide with hydrochloric acid
Answer:
Ca²⁺ and Cl⁻
Explanation:
In a chemical reaction, spectator ions are ions that are not involved in the reaction, that means are the same before and after the reaction.
In water, calcium hydroxide, Ca(OH)₂ is dissociated in Ca²⁺ and OH⁻. Also, hydrochloric acid, HCl, dissociates in H⁺ and Cl⁻. The reaction is:
Ca²⁺ + 2OH⁻ + 2H⁺ + 2Cl⁻ → 2H₂O + Ca²⁺ + 2Cl⁻
The ions that react are H⁺ and OH⁻ (Acid and base producing water)
And the ions that are not reacting, spectator ions, are:
Ca²⁺ and Cl⁻1. What happens to global temperature averages that start an ice age?
Answer:
Around 46° F (7.8° C)
Explanation:
"Scientists have predicted that the global average temperature during the ice age was around 46 degrees Farenheit (7.8 degrees Celsius.) However, the polar regions were far colder, around 25 degrees Fahrenheit (14 degrees Celsius) colder than the global average."
Source: http://www.weforum.org
Describe the factors influencing chemical bonds and the
characteristics of an ionic and a covalent bond.
Explanation:
factors affecting chemical bonds
a. electronegativity difference
b. size
c. charges
characteristics of Ionic bond
a. high melting point
b. they are soluble in polar solvents
c. they don't conduct electricity in solid state
characteristics of covalent bonds
a. they are insoluble in polar solvents
b. they don't conduct electricity
c. low melting point
For the reaction CO2(g) + H2(g)CO(g) + H20(g)
∆H°=41.2 kJ and ∆S°=42.1 J/K
The standard free energy change for the reaction of 1.96 moles of Co2(g) at 289 K, 1 atm would be_________KJ.
This reaction is (reactant, product)___________ favored under standard conditions at 289 K.
Assume that ∆H° and ∆S° are independent of temperature.
Answer:
The ΔG° is 29 kJ and the reaction is favored towards reactant.
Explanation:
Based on the given information, the ΔH°rxn or enthalpy change is 41.2 kJ, the ΔS°rxn or change in entropy is 42.1 J/K or 42.1 * 10⁻³ kJ/K. The temperature given is 289 K. Now the Gibbs Free energy change can be calculated by using the formula,
ΔG° = ΔH°rxn - TΔS°rxn
= 41.2 kJ - 289 K × 42.1 × 10⁻³ kJ/K
= 41.2 kJ - 12.2 kJ
= 29 kJ
As ΔG° of the reaction is positive, therefore, the reaction is favored towards reactant.
An unknown compound has the following chemical formula:
Co(OH),
where x stands for a whole number.
Measurements also show that a certain sample of the unknown compound contains 5.1 mol of oxygen and 2.59 mol of cobalt.
Write the complete chemical formula for the unknown compound.
since we are given the moles for Co and O, we'll divide both of those moles by the lowest mole quantity, which is, in this case, 2.59. After dividing, we see that the ratio of O to Co is 2:1. So, for every 1 Co atom, there has to be 2 O atoms. we can then insert the 2 in for OH to satisfy this ratio.
What do you predict the chemical formula for the compound formed between calcium and sulfur?
Answer:
calcium donates two vanence electrons to sulfur atom to form Ca2+ ion and an S2+ - ion
A 2.87g sample of carbon reacts with hydrogen to form 3.41g of car fuel. What is the empirical formula of the car fuel?
Answer:
The empirical formulae for the car fuel is C4H9
What is the molarity of 4 g of NaCl dissolved in 100mL of water?
Answer:
[tex]M=0.684M[/tex]
Explanation:
Hello,
In this case, considering that the solution is formed by NaCl as the solute and water as the solvent, we can compute the molarity as shown below:
[tex]M=\frac{mol_{solute}}{V_{solution}}[/tex]
Whereas the volume of the solution must be in liters. In such a way, since the addition of sodium chloride does not significantly changes the volume of the solution we can say it remains in 100 mL (0.100 L) and the moles of sodium chloride are computed by using its molar mass (58.45 g/mol):
[tex]mol_{solute}=4g*\frac{1mol}{58.45g} =0.0684mol[/tex]
Therefore, the molarity is:
[tex]M=\frac{0.0684mol}{0.100L} \\\\M=0.684\frac{mol}{L}=0.684M[/tex]
Regards.
Complete the following reactions
need answers?
i) P + [H]
ii) O2 + [H]
iii) LiH + H2O
iv) CaC2 +H2O
v) NaH + H2O
vi) CaH2 H2O
Answer:
this reaction will produce phosphineP+H---->PH
this reaction will produce waterO2+H---->H2O
this reaction will produce lithium hydroxide and hydrogen gasLiH+H2O---->LiOH+H2
this reaction will produce calcium hydroxide and acetylene gasCaC2+H2O---->Ca(OH)2+C2H2
this reaction will produce sodium hydroxide and hydrogen gasNaH+H2O---->NaOH+H2
this type of reaction will produce calcium hydroxide and hydrogen gasCaH2+H2O---->CaOH+H2
I hope this helps
A critical reaction in the production of energy to do work or drive chemical reactions in biological systems is the hydrolysis of adenosine triphosphate, ATP, to adenosine diphosphate, ADP, as described by the reaction
ATP(aq)+H2O(l)→ADP(aq)+HPO2−4(aq) for which ΔGrxn=30.5 kJ/mol at 37.0∘C and pH 7.0.
Required:
Calculate the value of ΔGrxn in a biological cell in which [ATP]=5.0 mM, [ADP]=0.60 mM, and [HPO2−4]=5.0 mM
Answer:
ΔG = -49.64 KJ/mol
Explanation:
The actual free energy change of the reaction under the given conditions, ΔG is given by the formula below;
ΔG = ΔG'° + RT ln([ADP][HPO₂⁴⁻] / [ATP])
where ΔG'° = -30.5 KJ/mol; R = 8.315 J/mol.K; T = 37°C = 310 K; [ADP] = 5.0 mM = 0.005 M; [HPO₂⁴⁻] = 0.60 mM = 0.0006 M; [ATP] = 5.0 mM = 0.005 M
ΔG = -30.5 KJ/mol + (8.315 J/mol.K)(310 K) ln {(0.005)(0.0006)/(0.005)}
ΔG = -30.5 KJ/mol + (2.58 KJ/mol * -7.4186)
ΔG = -30.5 KJ/mol - 19.14 KJ/mol
ΔG = -49.64 KJ/mol
Sean plated an unknown metal onto his silver ring which initially weighed 1.4 g. He constructs an electrolytic cell using his ring as one of the electrodes. After running the cell, 0.022 moles of the unknown metal was plated onto his ring and the mass of the ring increased to 3.137 g. What is the atomic weight of the unknown metal in g/mol
Answer:
79 g/mol
Explanation:
Mass of unknown metal deposited = 3.137 g - 1.4 g = 1.737 g
Number of moles of metal deposited = 0.022 moles
Since;
Number of moles = reacting mass/molar mass
Molar mass = reacting mass/number of moles
Molar mass = 1.737 g/0.022 moles
Molar mass= 79 g/mol
A skydiver slows down from 65 m/s to 5 m/s by opening the parachute. If this
takes 0.75 seconds, what is the skydiver's acceleration?
A. 45 m/s2 up
B. 80 m/s2 up
C. 45 m/s2 down
D. 80 m/s2 down
Answer:
D. -80m/s^2
Explanation:
V = u + at
5 = 65 + a (0.75)
0.75a = -60
a = -60/0.75
a = -80m/s^2
Therefore, is decelerating at 80m/s^2
Answer:
[tex]\boxed {\boxed {\sf D. \ 80 \ m/s^2 \ down}}[/tex]
Explanation:
We are asked to find the acceleration of a skydiver. Acceleration is the change in velocity over the change in time, so the formula for calculating acceleration is:
[tex]a= \frac{v_f-v_i}{t}[/tex]
The skydiver was initially traveling 65 meters per second, then he slowed down to a final velocity of 5 meters per second. He slowed down in 0.75 seconds.
[tex]\bullet \ v_f = 5 \ m/s \\\bullet \ v_i= 65 \ m/s \\\bullet \ t= 0.75 \ s[/tex]
Substitute the values into the formula.
[tex]a= \frac{ 5 \ m/s - 65 \ m/s}{0.75 \ s}[/tex]
Solve the numerator.
[tex]a= \frac{-60 \ m/s}{0.75 \ s}[/tex]
Divide.
[tex]a= -80 \ m/s^2[/tex]
The acceleration of the skydiver is -80 meters per second squared or 80 meters per second squared down. The skydiver is slowing down or decelerating, so the acceleration is negative or down.
The ceramic glaze on a red-orange Fiestaware plate is U2O3 and contains 50.1 grams of 238U, but very little 235U. (a) What is the activity of the plate (in Ci)
Answer:
The correct answer is 1.68 × 10⁻⁵ Ci
Explanation:
The activity of the uranium is determined by using the formula,
R = 0.693 N/t1/2 -------------- (i)
The number of atoms is, N = nNA
Here, NA is the Avogadro number and n is the number of moles. The value of n is m/M, that is, mass/molecular mass. Now the value of N becomes,
N = (m/M) NA
The m or mass of uranium given is 50.1 grams, and the molecular mass is 238 g/mol, now putting the values we get,
N = (50 g/238 g) (6.023 × 10²³) = 1.26 × 10²³
The half-life of 238U from year to second is,
t1/2 = (4.468 × 10⁸ year) (3.16 × 10⁷ s/ 1 year) = 1.412 × 10¹⁶ s
Substituting the values of t1/2 as 1.412 × 10¹⁶, and 1.26 × 10²³ for N in equation (i) we get,
R = 0.639 (1.26 × 10²³) / 1.412 × 10¹⁶ s
= 6.18 × 10⁶ Bq (2.7027 × 10⁻¹¹ Ci/1 Bq)
= 1.68 × 10⁻⁵ Ci
Hence, the activity of the plate is 1.68 × 10⁻⁵ Ci
Atoms are indivisible spheres. 1.plum pudding model 2.Dalton model 3.Bohr model
Answer: 2. Dalton Model
Explanation:
John Dalton proposed that atoms are indivisible spheres. Although his model of an atom was not entirely new to the scientific world since the ancient Greeks has made a similar statement in the past ( all matter are made up of small indivisible particle called atom).
As of when Dalton proposed his model of an atom, electrons and nucleus where yet to be discovered.
What is the rate constant of a reaction if rate = 1 x 10-2 (mol/L)/s, [A] is 2 M,
[B] is 3 M, m = 2, and n = 1?
Answer:
[tex]0.10 \text{ L$^2$mol$^{-2}$s$^{-1}$}[/tex]
Explanation:
The general formula for a rate law is
[tex]\text{rate} = k\text{[A]}^m \text{[B]}^{n}[/tex]
With your numbers, the rate law becomes
1.2 mol·L⁻¹s⁻¹ = k(2 mol·L⁻¹)²(3 mol·L⁻¹)¹ = k × 4 mol²L⁻² × 3 mol·L⁻¹
= 12k mol³L⁻³
[tex]\\ k = \dfrac{\text{1.2 mol $\cdot$ L$^{-1}$s$^{-1}$} }{12\text{ mol$^{3}$L}^{-3}} = \mathbf{0.10} \textbf{ L$\mathbf{^2}$mol$^{\mathbf{-2}}$s$^{\mathbf{-1}}$}[/tex]
Given the balanced chemical equation for the decomposition for INO, and the rate of disappearance of INO, write the expressions for the rates of appearance of I2 and NO.
2INO(g) → I2(g) + 2NO(g)
Reactant: Product(I2): Product(NO):
-∆[INO]/2∆t = ??/??
Answer:
rate of disappearance of -0.5d[INO]/dt
rate of appearance of I2 = d[I2]/dt
rate of appearance of No = 0.5*d[NO]/dt
Explanation:
According to chemical equilibrium, d[I₂]/dt and d[NO]/dt is the expressions for the rates of appearance of I₂ and NO respectively.
What is chemical equilibrium?Chemical equilibrium is defined as the condition which arises during the course of a reversible chemical reaction with no net change in amount of reactants and products.A reversible chemical reaction is the one wherein the products as soon as they are formed react together to produce back the reactants.
At equilibrium, the two opposing reactions which take place take place at equal rates and there is no net change in amount of the substances which are involved in the chemical reaction.At equilibrium, the reaction is considered to be complete . Conditions which are required for equilibrium are given by quantitative formulation.
Factors which affect chemical equilibrium are change in concentration , change in pressure and temperature and presence of catalyst.
Learn more about chemical equilibrium,here:
https://brainly.com/question/4289021
#SPJ6
Which of the following elements is in the same group as Sulfur (S)?
Answer:
PLEASE SHOW ME THE ELEMENTS OR I WOULD ENLIST ALL THE ELEMENTS.
Explanation:
Group 6A (or VIA) of the periodic table are the chalcogens: the nonmetals oxygen (O), sulfur (S), and selenium (Se), the metalloid tellurium (Te), and the metal polonium (Po)
3. Write the following isotope in hyphenated form (e.g., "carbon-14”): Kr
a. Krypton-109
b. Krypton -37
c. Krypton -36
d. Krypton -73
Answer:
Krypton -73
Explanation:
There are 33 known isotopes of krypton (36Kr) with atomic mass numbers from 69 through 101.
Good luck!
Answer:
D. Krypton-73
Explanation:
An isotope of an element has the same atomic number and the same number of protons but a different number of neutrons and a different atomic weight. Krypton is the 36th element on the periodic table. It has 36 protons and 48 neutrons. Krypton-73 is one of 33 known isotopes of Krypton and is the only one that actually exists from the list of choices.
Hope that helps.