A toroidal solenoid with 400 turns of wire and a mean radius of 6.0 cm carries a current of 0.25 A. The relative permeability of the core is 80.
(a) What is the magnetic field in the core?
(b) What part of the magnetic field is due to atomic currents?

Answer:

The critical angle phenomenon.

Explanation:

Critical angle in optics is the smallest angle of incidence of a wave, that will give total reflection of the wave. This phenomenon occurs at the boundary of two medium, where light will normally move from one medium to another.

To prevent light from entering the water, the angle of incidence of the light incident on the water must exceed the critical angle.

Answer:

1. 0.2m

1. 66m

Explanation:

See attached file

The expressions of fluid mechanics allows to find the result for the maximum height that the water leaves through the two points are;

1) The maximum height when the water leaves the hose is: Δy = 0.20 m

2) The maximum height of the water leaves the nozzle is: Δy = 68.6m

Given parameters

To find

   1. Maximum height of water in hose

  2. Maximum height of water at the nozzle

Fluid mechanics studies the movement of fluids, liquids and gases in different systems, for this it uses two expressions:

           A₁v₁ = A₂.v₂

          P₁ + ½ ρ g v₁² + ρ g y₁ = P₂ + ½ ρ g v₂² + ρ g y₂

Where the subscripts 1 and 2 represent two points of interest, P is the pressure, ρ the density, v the velocity, g the acceleration of gravity and y the height.

1, Let's find the exit velocity of the water in the hose.

Let's use subscript 1 for the nozzle and subscript 2 for the hose.

The continuity equation of the flow value that must be constant throughout the system.

      Q = A₁ v₁

      v₁ = [tex]\frac{Q}{A_1 }[/tex]  

The area of ​​a circle is:

     A = π r²

Let's calculate the velocity in the hose.

    A₁ = π (0.94 10⁻²) ²

    A₁ = 2.78 10⁻⁴ m²

    v₁ = [tex]\frac{0.55 \ 10^{-3}}{2.78 \ 10^{-4}}[/tex]

    v₁ = 1.98 m / s

Let's use Bernoulli's equation.

When the water leaves the hose the pressure is atmospheric and when it reaches the highest point it has not changed P1 = P2

      ½ ρ v₁² + ρ g y₁ = ½ ρ v₂² + ρ g v₂

      y₂-y₁ = ½  [tex]\frac{v_i^2 - v_2^2}{g}[/tex]  

At the highest point of the trajectory the velocity must be zero.

     y₂- y₁ = [tex]\frac{v_1^2}{2g}[/tex]

Let's calculate

     y₂-y₁ =  [tex]\frac{1.98^2}{2 \ 9.8}[/tex]  

     Δy = 0.2 m

2.  Let's find the exit velocity of the water at the nozzle

          A₁ = π r²

          A₁ = π (0.22 10⁻²) ²

          A₁ = 0.152 10⁻⁴ m / s

With the continuity and flow equation.

           Q = A v

            v₁ = [tex]\frac{Q}{A}[/tex]  

             v₁ = [tex]\frac{0.55 \ 10{-3} }{0.152 \ 10^{-4} }[/tex]  

             v₁ = 36.67 m / s

Using Bernoulli's equation, where the speed of the water at the highest point is zero.

           y₂- y₁ =  [tex]\frac{v^1^2}{g}[/tex]  

Let's calculate.

           Δy =  [tex]\frac{36.67^2 }{2 \ 9.8 }[/tex]  

           Δy = 68.6m

In conclusion using the expressions of fluid mechanics we can find the results the maximum height that the water leaves through the two cases are:

      1) The maximum height when the water leaves the hose is:

          Δy = 0.20 m

      2) The maximum height of the water when it leaves the nozzle is:

          Δy = 68.6 m

Learn more here:  https://brainly.com/question/4629227

Answer:

Mass of the car is independent of gravity

Explanation:

Here, we want to state the reason why even though we have the acceleration due to gravity absent on the moon, it is still difficult to accelerate a car on a level horizontal level on the moon.

The answer to this is that the mass of the car that we want to accelerate is independent of gravity.

Had it been that gravity has an effect on the mass of the said car, then we might conclude that it will not be difficult to accelerate the car on a horizontal surface on the moon.

But due to the fact that gravity has no effect on the mass of the car to be accelerated, then the problem we have on earth with accelerating the car is the same problem we will have on the moon if we try to accelerate the car on a horizontal level surface.

Answer:

Explanation:

That Universe Consists of Matter

Answer:

The percentage is  [tex]k = 12.5 \%[/tex]

Explanation:

From the question we are told that

    The  axis is is  at  [tex]\theta = 45 ^o[/tex]

Generally the of intensity light emerging from the first polarizer is mathematically represented as

                [tex]I_{1} = \frac{I_o}{ 2}[/tex]

Where  [tex]I_o[/tex] is the intensity of unpolarized light

       Now the light emerging from the second polarizer is mathematically represented as

         [tex]I_2 = I_ 1 * cos ^2(\theta )[/tex]

         [tex]I_2 = \frac{I_o}{2} * cos ^2(45 )[/tex]

        [tex]I_2 = \frac{I_o}{2} * \frac{1}{2} = \frac{I_o}{4}[/tex]

  Now the light emerging from the third  polarizer is mathematically represented as      

       [tex]I_3 = I_ 2 * cos ^2(\theta )[/tex]

       [tex]I_3 = \frac{I_o}{4} * cos ^2(45 )[/tex]

      [tex]I_3 = \frac{I_o}{8}[/tex]

Now the percentage of the intensity of light that emerged with respect to the intensity of  the unpolarized light is

      [tex]k = \frac{\frac{I_o}{8} }{I_o } * 100[/tex]

     [tex]k = 12.5 \%[/tex]

The percentage of light that gets through the three successive Polaroid filters is; 12.5%

We are given;

Angle of transmission axis; θ = 45°

Formula for intensity of light from first polarizer is;

I₁ = ¹/₂I₀

Formula for intensity of light from second polarizer is;

I₂ = I₁cos²θ

Formula for intensity of light from third polarizer is;

I₃ = I₂cos²(90 - θ)

Combining the 3 equations;

Put ¹/₂I₀ for I₁ in second formula to get;

I₂ = ¹/₂I₀cos²θ

Put ¹/₂I₀cos²θ for I₂ in third formula to get;

I₃ = ¹/₂I₀cos²θ*cos²(90 - θ)

Plugging in 45° for θ gives;

I₃ = ¹/₂I₀cos²45*cos²(90 - 45)

⇒ I₃ = ¹/₂I₀cos²45*cos²45

⇒ I₃ = ¹/₂I₀cos⁴45

Now, cos 45 in surd form is 1/√2. Thus;

I₃ = ¹/₂I₀(1/√2)⁴

I₃ = ¹/₂I₀(¹/₄)

I₃ = ¹/₈I₀

I₃/I₀ = ¹/₈

I₃/I₀ = 0.125

In percentage form, we have;

I₃/I₀ = 12.5%

Read more about unpolarized light at; https://brainly.com/question/1444040

Answer:

a) the distance between the interference fringes is reduced by half

b) the distance between stripes is doubled

Explanation:

Interference experiments constructive interference is described by the expression

          d sin θ = m λ

let's use trigonometry to find the distance between the interference fringes

              tan θ=  y / L

dodne y is the distance from the central maximum, L the distance from the slit to the observation screen. In general these experiments are carried out at very small angles

            tan θ = sin θ / cos θ = sin θ

we substitute

             sin θ = y / L

            d y / L = m  λ

           y = m λ / d L

a) it asks us when the screen doubles its distance

           L ’= 2 L

subtitute in the equation

           y ’= m λ / (d 2L)

           y ’=( m λ / d L) /2

           y ’= y / 2

the distance between the interference fringes is reduced by half

b) the density of the network doubles

      if the density doubles in the same distance there are twice as many slits, so the distance between them is reduced by half

            d ’= d / 2

we substitute

          y ’= m λ (L d / 2)

          y ’= m λ / (L d) 2

          y ’= y 2

the distance between stripes is doubled

Answer:

a. Moon around Earth.

Explanation:

Charon orbit takes around 6.4 earth days to complete its orbit. Charon does not rises or sets, it hovers over same spot around the Pluto. The same side of Charon faces the Pluto, this is called Tidal Locking.

The moon orbit takes around 27 days to complete its orbit. The moon has different sides that are faced with sun which creates light or dark face of moon on the earth. Moon has 384,400 km distance from the earth.

The object that should exhibit the longest orbital period is option a. Moon around Earth.

Charon's orbit takes around 6.4 earth days to finish its orbit. Charon does not rise or sets, it hovers over similar spot around Pluto. The same side of Charon faces Pluto, this we called Tidal Locking. Here the moon orbit should take approx 27 days to finish its orbit. The moon has various sides that are faced with the sun which developed the light or dark face of the moon on the earth. Also, Moon has 384,400 km distance from the earth.

learn more about orbit here: https://brainly.com/question/25404554

Answer:

The emerging intensity is equal to 0.75[tex]I_{o}[/tex]

Explanation:

The initial intensity of the light = [tex]I_{o}[/tex]

The angle of polarization β = 30°

We know that the polarized light intensity is related to the initial light intensity by

[tex]I[/tex] = [tex]I_{0} cos^{2}\beta[/tex]

where [tex]I[/tex] is the emerging polarized light intensity

inserting values gives

[tex]I[/tex] = [tex]I_{0} cos^{2}[/tex] 30°

[tex]cos^{2}[/tex] 30° = [tex](cos 30)^{2}[/tex] = [tex](\frac{\sqrt{3} }{2} )^{2}[/tex] = 0.75

[tex]I[/tex] = 0.75[tex]I_{o}[/tex]

Answer: f ≈ 8.5Hz

Explanation: The phenomenon known as Doppler Shift is characterized as a change in frequency when one observer is stationary and the source emitting the frequency is moving or when both observer and source are moving.

For a source moving and a stationary observer, to determine the frequency:

[tex]f_{0} = f_{s}.\frac{c}{c-v_{s}}[/tex]

where:

[tex]f_{0}[/tex] is frequency of observer;

[tex]f_{s}[/tex] is frequency of source;

c is the constant speed of sound c = 340m/s;

[tex]v_{s}[/tex] is velocity of source;

Rearraging for frequency of source:

[tex]f_{0} = f_{s}.\frac{c}{c-v_{s}}[/tex]

[tex]f_{s} = f_{0}.\frac{c-v_{s}}{c}[/tex]

Replacing and calculating:

[tex]f_{s} = 9.(\frac{340-20}{340})[/tex]

[tex]f_{s} = 9.(0.9412)[/tex]

[tex]f_{s} =[/tex] 8.5

Frequency the horns emit is 8.5Hz.

Answer:

The temperature difference [tex]\Delta T = 258.6 \ ^ o\ C[/tex]

Explanation:

From the question we are told that

   The  thickness is [tex]\Delta x = 0.630 cm = 0.0063 m[/tex]

    The  area is  [tex]A = 1.45 *10^{-2 } \ m^2[/tex]

     The rate is  [tex]P = 500 J/s[/tex]

       The  thermal conductivity is  [tex]\sigma = 0.84J[\cdot s \cdot m \cdot ^oC ][/tex]

Generally the rate heat conduction mathematically represented as

       [tex]P = \sigma * A * \frac{\Delta T}{\Delta x }[/tex]

=>    [tex]\Delta T = \frac{P * \Delta x }{\sigma * A }[/tex]

=>     [tex]\Delta T = \frac{ 500 * 0.00630 }{ 0.84 * 1.45 *10^{-2} }[/tex]

=>    [tex]\Delta T = 258.6 \ ^ o\ C[/tex]

Answer:

A) the frequency and amplitude of the output voltag

Explanation:

Changing the speed of a synchronous generator changes both the output voltage (amplitude of the wave) and frequency as they tend to increase.

Changing the speed regulator will change the engine throttle setting to maintain the speed.

While the power, torque, current, fuel flow rate and torque angle will have decreased.

Answer:

The correct answer is A. The sun is the energy source of the surface currents in the ocean

The energy transfer starts from solar energy , then wind energy and finally wind energy is the cause of surface current .

Surface currents are currents that are located in the upper feet of the ocean , they are simply how water moves from one place to another . Pattern of surface current are determined by wind direction .

Surface currents are formed by global wind system that are fueled by energy from the sun . Because of heating effect of sun , the earth's atmosphere gets warmed up . As we know , warm air is lighter then cool air , it rises up and create low pressure near the equator because of this wind causes surface currents the ocean .

hence , The energy transfer starts from solar energy , then wind energy and finally wind energy is the cause of surface current .

learn more about surface current

https://brainly.com/question/1255202?referrer=searchResults

#SPJ3

Answer:

a)3000ohm

b)4.44mA

Explanation:

a) we were given a Nine tree lights connected inparallel across 120-V potential difference, since the resistor are in parallel we use the expresion below

1/R(total)= 1/R₁ + 1/R₂ + 1/R₃ + 1/R₃ +.... 1/R₉

But according to ohm'law which can be expressed below

V=IR

R=V/I

R(total)= 120/0.36

= 333.33ohm

1/R(total)= 1/R₁ + 1/R₂ + 1/R₃ + 1/R₃ +.... 1/R₉

R₁=R₂ =R₃ =R₄= R₅=R₆=R₇=R₈=R₉

1/R(total)=9/R

1/333.33= 9/R

R= 3000ohm

Therefore, the resistance is 3000ohm

b)the bulbs were connected in series here, then for series connection we use below expression

R₁=R₂ =R₃ =R₄= R₅=R₆=R₇=R₈=R₉

R(total)=9R

= 9*3000

=27000ohm

I=VR

I=V/R

I= 120/27000

= 4.44*10⁻³A

4.44mA

Therefore, the current is 4.4mA

Answer:

Explanation:

The air enters their lungs at the same pressure as the water at that depth.

If they hold their breath as they rise to atmospheric pressure, the expanding volume of air (due to decreasing pressure) trapped in their lungs will hyperextend the alveoli in their lungs, likely tearing blood lines and risking death by drowning in their own blood.

Answer:

Explanation:

A) 131 dB = 10*log(I / 1e-12W/m²)

where I is the intensity at 2.6 m away.

13.1 = log(I / 1e-12W/m²

1.25e13= I / 1e-12W/m²

I = 1.25 x10^1W/m²

power = intensity * area

P = I * A = 12.5W/m² * 4π(2.6m)² =1061 W ◄

B) 86 dB = 10*log(I / 1e-12W/m²)

8.6 = log(I / 1e-12W/m²)

3.98e8 = I / 1e-12W/m²

I = 3.98e-4 W/m²

area A = P / I = 1061W / 3.98e-4W/m² = 2.66e6 m²

A = 4πr²

2.66e6 m² = 4πr²

r = 14.5m ◄

Answer:

α = π/3

β = π/6

Explanation:

Use arc length equation to find the sum of the angles.

s = rθ

π/20 m = (0.1 m) (α + β)

π/2 = α + β

Draw a free body diagram for each sphere.  Both spheres have three forces acting on them:

Weight force mg pulling down,

Normal force N pushing perpendicular to the surface,

and tension force T pulling tangential to the surface.

Sum of forces on A in the tangential direction:

∑F = ma

T − m₁g sin α = 0

T = m₁g sin α

Sum of forces on B in the tangential direction:

∑F = ma

T − m₂g sin β = 0

T = m₂g sin β

Substituting:

m₁g sin α = m₂g sin β

m₁ sin α = m₂ sin β

(1 kg) sin α = (√3 kg) sin (π/2 − α)

1 sin α = √3 cos α

tan α = √3

α = π/3

β = π/6

Answer:

[tex]\huge\boxed{Refracted}[/tex]

Explanation:

When a ray of light passes from glass to water, it

1) is Slightly refracted (bending of light)

2) moves away from the normal.

Whenever a light ray travels from a denser medium to a rarer medium, it bends away from the normal.

Answer:

refraction

Explanation:

Answer:

see that the inductance depends on the variation with respect to time of the current, therefore it is independent, increase decreases,

Explanation:

The express for inductance is

         [tex]E_{L}[/tex]= L dI / dt

         L = E_{L}  (di / dt)⁻¹

where L is the inductance, E_{L} the induced electromotive force, di/dt  the variation of the current as a function of time.

When analyzing this equation we see that the inductance depends on the variation with respect to time of the current, therefore it is independent, increase decreases,

Correct answer the inductance must be the same regardless of whether the current increases or decreases.

Answer:

[tex]\frac{di}{dt} = 7.31 \ A/s[/tex]

Explanation:

From the question we are told that  

     The  number of turns is  [tex]N = 450 \ turns[/tex]

      The  radius is  [tex]r = 1.17 \ cm = 0.0117 \ m[/tex]

       The  position from the center consider is  x =  3.45 cm  =  0.0345 m

       The  induced emf is  [tex]e = 8.20 *10^{-6} \ V/m[/tex]

Generally according to Gauss law

        [tex]\int\limits { e } \, dl = \mu_o * N * \frac{di}{dt } * A[/tex]

=>    [tex]e * 2\pi x = \mu_o * N * \frac{d i }{dt } * A[/tex]

Where A is the  cross-sectional area of the solenoid which is mathematically represented as

                [tex]A = \pi r ^2[/tex]

=>      [tex]e * 2\pi x = \mu_o * N * \frac{d i }{dt } * \pi r^2[/tex]

=>       [tex]\frac{di}{dt} = \frac{2e * x }{\mu_o * N * r^2}[/tex]ggl;

Here  [tex]\mu_o[/tex] is the permeability of free space with value

          [tex]\mu_o = 4\pi * 10^{-7} \ N/A^2[/tex]

=>     [tex]\frac{di}{dt} = \frac{2 * 8.20*10^{-6} * 0.0345 }{ 4\pi * 10^{-7} * 450 * (0.0117)^2}[/tex]

=>      [tex]\frac{di}{dt} = 7.31 \ A/s[/tex]

The value of di/dt from the given values of the solenoid electric field is;

di/dt = 7.415 A/s

We are given;

Number of turns; N = 450 per m

Radius; r = 1.17 cm = 0.0117 m

Electric Field; E = 8.2 × 10⁻⁶ V/m

Position of electric field; r' = 3.45 cm = 0.0345 m

According to Gauss's law of electric field;

∫| E*dl | = |-d∅/dt |

Now, ∅ = BA = μ₀niA

where;

n is number of turns

i is current

A is Area

μ₀ = 4π × 10⁻⁷ H/m

Thus;

E(2πr') = (d/dt)(μ₀niA)  (negative sign is gone from the right hand side because we are dealing with magnitude)

Since we are looking for di/dt, then we have;

E(2πr') = (di/dt)(μ₀nA)

Making di/dt the subject of the formula gives;

di/dt = E(2πr')/(μ₀nA)

Plugging in the relevant values gives us;

di/dt = (8.2 × 10⁻⁶ × 2 × π × 0.0345)/(4π × 10⁻⁷ × 450 × π × 0.0117²)

di/dt = 7.415 A/s

Read more at; https://brainly.com/question/14003638

Answer:

E = -8.23 ​​10⁻¹⁷ N / C

Explanation:

In the Bohr model, the electric potential for the ground state corresponding to the Bohr orbit is

         E = k q₁ q₂ / r²

in this case

q₁ is the charge of the proton and q₂ the charge of the electron

         E = - k e² / a₀²

let's calculate

         E = - 9 10⁹ (1.6 10⁻¹⁹)² / (0.529 10⁻¹⁰)²

         E = -8.23 ​​10⁻¹⁷ N / C

Answer:

2500 kg/m³

Explanation:

P = P

ρgh = ρgh

ρh = ρh

(1000 kg/m³) (8.9 cm) = ρ (3.5 cm)

ρ ≈ 2500 kg/m³

Answer:

A.   number of neutrons of Magnesium Mg = 13

B.   The average mass of Mg = 22.29 amu

C.   the magnesium composition on Mars is not the same as that on Earth.

Explanation:

Isotopes are atoms with the same atomic number but different mass number. This is due to the difference in mass of the neutrons.

The atomic number of Magnesium Mg = 12

The atomic number of an element is the number of protons present in the atomic nucleus of the element

i.e Atomic number = number of protons = 12

The mass number of an element is the sum of the protons and neutrons in the atomic nucleus of the element.

Mass number = number of protons + number of neutrons

Given that the mass number of Mg = 25

Then;

25 = 12 + number of neutrons

25 - 12 = number of neutrons

13 = number of neutrons

number of neutrons of Magnesium Mg = 13

B. What is the average atomic mass of magnesium in these rocks?

The average atomic mass of an element which exhibit isotopy is the average mass of its various isotopes as they occur naturally in any quantity of the element.

Therefore the average atomic mass of magnesium can be calculated as:

= [tex]\mathtt{\dfrac{(23.9872 \times 79.70) + ( 24.9886 \times 10.13) + (25.9846 \times 10.17) }{79.7 + 10.13 +10.17}}[/tex]

= [tex]\mathtt{\dfrac{(1911.77984) + ( 53.134518) + (264.263382) }{100}}[/tex]

= [tex]\mathtt{\dfrac{2229.17774 }{100}}[/tex]

The average mass of Mg = 22.29 amu

C. Is the magnesium composition on Mars the same as that on Earth? Explain.

The average atomic weight of magnesium on Earth is said to be 24.305 amu while that of Mars is 22.29 amu.

There difference in the average atomic weight result into difference in their composition. Therefore,the magnesium composition on Mars is not the same as that on Earth.

Answer: Search Results

Featured snippet from the web

Answer: Surface waves can have characteristics of both longitudinal and transverse waves in the following way; The motion of the surface waves is up and down which is perpendicular to the direction of the wave. This is similar to the motion of transverse waves whereas the the motion of longitudinal.

Explanation:

Surface waves can exhibit characteristics of both longitudinal waves and transverse waves.

Surface waves are a type of mechanical wave that propagate along the interface between two different mediums, such as the ground and air or the surface of water. These waves combine properties of both longitudinal and transverse waves

Similar to longitudinal waves, surface waves involve particles oscillating in the same direction as the wave propagation. This creates compressions and rarefactions, leading to variations in density or pressure. These compressions and rarefactions are characteristic of longitudinal waves.

However, surface waves also exhibit transverse motion. As the wave propagates along the surface, particles move in a perpendicular direction to the wave's motion. This transverse motion causes particles to displace vertically or horizontally, similar to transverse waves.

By combining both longitudinal and transverse characteristics, surface waves possess a complex motion that allows them to travel along the surface while simultaneously causing particles to oscillate both parallel and perpendicular to the direction of wave propagation.

To know more about Surface waves, click here.

https://brainly.com/question/907481

#SPJ2

Answer

3.340J

Explanation;

Using the relation. Energy stored in capacitor = U = 7.72 J

U =(1/2)CV^2

C =(eo)A/d

C*d=(eo)A=constant

C2d2=C1d1

C2=C1d1/d2

The separation between the plates is 3.30mm . The separation is decreased to 1.45 mm.

Initial separation between the plates =d1= 3.30mm .

Final separation = d2 = 1.45 mm

(A) if the capacitor was disconnected from the potential source before the separation of the plates was changed, charge 'q' remains same

Energy=U =(1/2)q^2/C

U2C2 = U1C1

U2 =U1C1 /C2

U2 =U1d2/d1

Final energy = Uf = initial energy *d2/d1

Final energy = Uf =7.72*1.45/3.30

(A) Final energy = Uf = 3.340J

Answer:

eastlove india

Answer:

Final temperature Water = 20.99-degree  celsius

Final temperature  Concrete = 24.98  degree celsius

Final temperature  Steel = 50.1 degree  celsius

Final temperature Mercury = 29.26  degree  celsius

Explanation:

Given the mass of each substance = 1.50 kg

Ti = 15

Q = 1.5 kcal = 6276 joule

We have to use the heat capacity of each object so find the heat capacity from the table.

Heat capacity of water = 4186 J/kg degree celsius.

Heat capacity of concrete = 840 J/kg degree celsius.

Heat capacity of steel = 452 J/kg degree celsius.

Heat capacity of mercury = 139 J/kg degree celsius.

Use the below formula to find the final temperature.

[tex]T_f = T_i + \frac{Q}{mc_w} \\[/tex]

[tex]\text{Temperature in the case of water.} \\= 20 + \frac{6276}{1.5 \times 4186 } \\= 20.99 \ degree \ celsius \\\text{Temperature in the case of concrete.} \\= 20 + \frac{6276}{1.5 \times 840 } \\= 24.98 \ degree \ celsius \\\text{Temperature in the case of steel.} \\= 20 + \frac{6276}{1.5 \times 452 } \\= 29.26 \ degree \ celsius \\\text{Temperature in the case of mercury.} \\= 20 + \frac{6276}{1.5 \times 139 } \\= 50.1 \ degree \ celsius \\[/tex]

Answer:

9 N

Explanation:

Treat X and y as a single book with weight 9 N.

Draw a free body diagram of this book combination.  There are two forces: weight force 9 N pulling down, and normal force F pushing up.

Sum of forces in the y direction:

∑F = ma

F − 9 N = 0

F = 9 N

Answer:

a. The reactance of the inductor is XL = V₀/I₀

b. The inductance of the inductor is L = V₀/2πfI₀

Explanation:

PART A

Since the voltage across the inductor V₀ = I₀XL where V₀ = e.m.f of voltage source, I₀ = current amplitude and XL = reactance of the inductor,

XL = V₀/I₀

So, the reactance of the inductor is XL = V₀/I₀

PART B

The inductance of the inductor is gotten from XL = 2πfL where f = frequency of voltage source and L = inductance of inductor

Since XL = V₀/I₀ = 2πfL

V₀/I₀ = 2πfL

L = V₀/2πfI₀

So the inductance of the inductor is L = V₀/2πfI₀

A) The reactance XL of the inductor :  [tex]\frac{V_{0} }{I_{0} }[/tex]  

B) The Inductance L of the inductor : [tex]\frac{V_{0} }{2\pi fl_{0} }[/tex]  

A) Expressing the Reactance of the inductor

Voltage across the Inductor = V₀ = I₀XL   ---- ( 1 )

Where :  V₀ = emf voltage ,  I₀ = current

from equation ( 1 )

∴ XL ( reactance ) = [tex]\frac{V_{0} }{I_{0} }[/tex]  

B ) Expressing the Inductance of the Inductor

Inductance of an inductor is expressed as : XL = 2πfL

from part A

XL = [tex]\frac{V_{0} }{I_{0} }[/tex] = 2πfL

∴ The inductance L of the Inductor expressed in terms of V₀, F and I₀

L = [tex]\frac{V_{0} }{2\pi fl_{0} }[/tex]

Hence we can conclude that The reactance XL of the inductor :  [tex]\frac{V_{0} }{I_{0} }[/tex]  and The Inductance L of the inductor : [tex]\frac{V_{0} }{2\pi fl_{0} }[/tex]  .

Learn more : https://brainly.com/question/25208405

Answer:

[tex]1.0\times 10^{-6}[/tex] atmospheres are equivalent to [tex]7.6\times 10^{-4}[/tex] millimeters of mercury.

Explanation:

According to current SI unit conversions, 1 atmosphere is equal to 760 millimeters of mercury. The current pressure is determined by simple rule of three:

[tex]p = \frac{760\,mm\,Hg}{1\,atm} \times (1\times 10^{-6}\,atm)[/tex]

[tex]p = 7.6\times 10^{-4}\,mm\,Hg[/tex]

[tex]1.0\times 10^{-6}[/tex] atmospheres are equivalent to [tex]7.6\times 10^{-4}[/tex] millimeters of mercury.

Answer:

g' = g/9 = 1.09 m/s²

Explanation:

The magnitude of free fall acceleration at the surface of earth is given by the following formula:

g = GM/R²   ----- equation 1

where,

g = free fall acceleration

G = Universal Gravitational Constant

M = Mass of Earth

R = Distance between the center of earth and the object

So, in our case,

R = R + 2 R = 3 R

Therefore,

g' = GM/(3R)²

g' = (1/9) GM/R²

using equation 1:

g' = g/9

g' = (9.8 m/s)/9

g' = 1.09 m/s²

Answer:

Explanation:

Surface of earth,

[tex]g = \frac{GM}{R^2}\\\\g = 9.8m/s^2[/tex]

free fall acceleration at height h,

[tex]g_h = \frac{GM}{(R+h)^2}[/tex]

where

G = gravitational constant

R = Radius of earth

M = mass of earth

therefore,

[tex]\frac{g_h}{g} = \frac{\frac{GM}{(R+h)^2}}{\frac{GM}{R^2}}\\\\ \frac{g_h}{g} = \frac{R^2}{(R+h)^2}\\\\g_h = g\frac{R^2}{(R+h)^2}[/tex]

Where height h = 2R

[tex]g_h = 9.8\frac{R^2}{(R+2R)^2}\\\\g_h = 9.8\frac{R^2}{(3R)^2}\\\\g_h = 9.8\frac{R^2}{(9R^2}\\\\g_h = 1.09m/s^2[/tex]

For more information, visit

https://brainly.com/question/17162343