An iron nail is composed of four sotopes with the Percentage abundances given in the table below average Calculate the average atomic mass of iron Isotopes - Percentage
fe-54 - 5.80
fe-56 - 91.72
fe-57 - 2.20
fe-58 - 0.28​

Yes as the temperature increases the solubility of NH3 will decrease and as we increase the pressure solubility of NH3  increases.

Solubility is defined as the maximum amount of substance that will dissolve in a given amount of solvent at a given or specified temperature. Based on solubility different types of solutions can be obtained. A saturated solution is a solution where a saturated solution is a solution where a given amount of solute is completely soluble in the solution.

Whereas a supersaturated solution are those where solute starts precipitating out after a certain concentration.

Temperature does effect the solubility of NH3 because as  the temperature increases the hydrogen bonding also decreases, due to which the NH3 molecules are no longer able to bind to water molecules hence their solubility decreases.

But as we increase the pressure on NH3 molecules the bonding with the water molecules will be higher and therefore the solubility also increases.

To know more about solubility

https://brainly.com/question/1326791

#SPJ4

Answer:

Explanation:nitrous acid

False; after coming into contact with metal cations, methylene blue solution leaches out of the lichens. Because they can accept electrons, metal cations are very electronegative.

Methylene, often known as carbene, is an organic molecule having the chemical formula CH 2 that is also formally known as methylidene and hydrocarbon (also written [CH 2]). It is a colourless gas that only persists in diluted form or as an adduct, fluorescing in the mid-infrared range. The most fundamental carbene is methylene.

A lichen is a symbiotic association between many organisms, such as a cyanobacterium or an algae. In addition to being unique from algae, cyanobacteria are also known as blue-green lichen.

Learn more about methylene here

https://brainly.com/question/24020840

#SPJ4

the concentration of lithium hydroxide in molarity was 8M

what are the properties of lithium hydroxide?

A transparent to water-white liquid with a possible strong odour is what lithium hydroxide solution looks like. Skin, eyes, and mucous membranes may have very irritating contact reactions. Through consumption, inhalation, or skin absorption, it may be harmful. Other compounds are created using it.

Given,

weight =48 g

No. of moles  =2448=2 moles

volume =250mL

Molarity Volume (in L)No. of moles=0.25L2=8M

=8M

to learn more about molarity follow the given link: https://brainly.com/question/23243759

#SPJ4

No, we cannot say that if the IR spectrum is recorded for 2 samples using the same sampling method then the resulting IR spectra are not identical.

             Because, in general, it means they have the same functional groups but do not that they have the same chemical compound, different molecules have the same functional groups and stereochemistry is not taken into consideration so these compounds can be enantiomers.

The distinction between a carboxylic acid and a ketone using the IR spectroscopy method is that both compounds have C=O but the ketone does not have OH stretch and distinguish between an aldehyde and a ketone using spectroscopy method that compounds have C=O stretch but aldehyde should have C-H stretches between the carbonyl carbon and the aldehydic Hydrogen.

To read more about the IR spectrum:

https://brainly.com/question/15452269

#SPJ4

The missing item which would complete this alpha decay reaction is: C. ²⁵³Fm₉₈.

In Science, there are three (3) main types of radioactive decay and these include the following:

An alpha decay can be defined as a type of radioactive decay in which the atomic nucleus of a radioactive element emits an alpha particle, thereby, producing chemical elements that have different atomic nucleus.

During an alpha decay, a radioactive element such as fermium (Fe) with a mass number of 257 would be decreased by four (4) while its atomic number (number of protons) of 100 is decreased by two (2), to produce an isotope and an atom of Helium (⁴He₂), as illustrated in the chemical reaction below:

²⁵⁷Fe₁₀₀  ---->   ²⁵³Fm₉₈ + ⁴He₂

Read more on alpha decay here: https://brainly.com/question/23303931

#SPJ1

The pOH of this solution is 0.3 and the pH of the solution is 13.3 .

What is pH ?

The pH of a food is a direct function of the free hydrogen ions present in that food. Acids in food release free hydrogen ions. Hydrogen ions give acidic foods their characteristic sour taste. Therefore, pH can be defined as a measure of free acid. More specifically, pH is defined as the negative logarithm of hydrogen ion concentration. The pH range is 0 to 14. The pH of pure water is exactly 7, so pH 7 is neutral. Values ​​less than 7 are acidic. Values ​​above 7 are basic or basic.

Foods are generally classified as “acidic foods” (low pH, pH 4.6 or less) or “weakly acidic foods” (high pH, ​​pH 4.6 or higher). Safe food storage is determined by the pH of the food. Acidic foods such as fruit and pickles can be safely canned in a tin can with a hot water bath. A combination of acid and hot water (212°F) destroys perishable organisms such as mold and yeast. Proper cooking water canning processes are important to prevent the growth of acid-tolerant molds and yeasts that can lead to elevated pH levels. The pH of borderline foods such as figs and tomatoes can easily exceed 4.6, so lemon juice or citric acid should be added before canning with boiling water. Low-acid foods such as vegetables and meat should be processed in a pressure preserver for safety.

To know about the pH , click the link given ;

https://brainly.com/question/26424076

#SPJ4

The  spin quantum number will be 2 and 2.5 and multiplicity in each case will be 5 and 6.

The angular momentum of such an electron is described by its spin quantum number (ms). An electron carries orbital angular momentum in addition to angular momentum around its axis of rotation. The Spin Quantum Number (s) really does have a magnitude (1/2) and a direction (+ or -) since angular momentum would be a vector.

(i) If an atom has 4 electrons then it will have total

Total spin quantum number = 1/2+1/2+1/2+1/2 = 4/2=2

Multiplicity = 2S+1= 2×2+1=5

(ii)  If an atom has 5 electrons then it will have

Total spin quantum number = 1/2+1/2+1/2+1/2+1/2 = 5/2 = 2.5

Multiplicity = 2S+1= 2×2.5+1=6

Therefore, the spin quantum number will be 2 and 2.5

To know more about  multiplicity

https://brainly.com/question/14266366

#SPJ4

Answer: 6.59 x 10^24 formula units

Explanation: Formula units are another word for atoms, meaning we use Avogadro's number (6.022x10^23 atoms per mole), we multiply 10.95 by Avogadro's number to get the answer

The solubility of the strontium iodate is 3.1 * 10^-3 M.

The term solubility has to do with the amount of a solid that is dissolved in water. We know that there are some substances that are able to dissolve better in water than others.

We now have to find the solubility of the strontium iodate from the following;

Ksp = [x] [2x]^2

Ksp = 4x^3

The solubility of the substance is x.

x= ∛Ksp/4

x =∛ 1.14 x 10^-7/4

x = 3.1 * 10^-3 M

The solubility of the solid is obtained as  3.1 * 10^-3 M.

Learn more about solubility:https://brainly.com/question/28170449

#SPJ1

The products for the balanced reaction of hydrochloric acid (HCL) and magnesium hydroxide (mg(oh)2) are salt (magnesium chloride ) and water.

The balanced equation is:

[tex]Mg(OH) _{2}+2HCl - MgCl_{2}+2H_{2} O[/tex]

What happens when magnesium hydroxide reacts with HCl?

Does magnesium hydroxide dissolve in HCl?

Magnesium Hydroxide is soluble in dilute hydrochloric acid.

Thus, products obtained from the reaction are salt and water.

To know more about magnesium hydroxide:

https://brainly.com/question/22367865

#SPJ4

The only ion that is seen to be a negative ion in cobalt III sulfide is the sulfide ion.

The term anion just means a negative ion. We know that when we have an ionic compound, the ionic compound would have a positive ion which would have a plus sign and a negative ion which would have a minus sign.

We have to look at the compound that is called cobalt sulfide. there are two ions here, the cobalt III ion and the sulfide ion. The cobalt III ion is positive while the sulfide ion is negative.

Learn more about anion:https://brainly.com/question/15578817

#SPJ1

While solids have certain shape and volume, liquids only have definite volume but not shape, gases neither have shape nor volume. The level of energy is highest in gases, medium in liquid and lowest in solids. The compression of solids is difficult, liquids are nearly incompressible, but gases can be easily compressed.

#SPJ1

Answer:

B is the outer part atom .

The outermost regions of the atom are called electron shells and contain the electrons (negatively charged). The atoms have different properties based on the arrangement and number of their basic particles.SO the hydrogen atom (H) contains only one proton, one electron, and no neutrons

Explanation:

The phrases that describes the similarities between problem space theory and how the brain looks at problems is option C: They can occur quickly or slowly.

The category of problem-solving techniques used in social science includes the problem space theory. The problem space theory employs the strategy of characterizing the issue before seeking a resolution. The focus of a problem space is on the stages and objectives involved in solving a problem rather than providing details of a solution.

Note that Your heart rate increases as your brain releases a surge of adrenaline, causing you to become stiff and shake. Despite the absence of difficulties, the brain is programmed to find solutions. The brain invents a new problem to remedy when there is nothing to tackle.

Learn more about brain  from
https://brainly.com/question/1247675

#SPJ1

See full question below

Which of the following phrases describes the similarities between problem space theory and how the brain looks at problems?

They have only three steps.

They can only be used in a laboratory setting.

They can occur quickly or slowly.

They are biased against the scientific method.

Answer:

Group VII are called halogens because react with metals to form salts

Dilute solution is the best method to get the final volume and concentration as we need.

Dilution is "the process of reducing the concentration of a solute in a solution by simply adding more solvent to the solution, eg. water." To dilute a solution, add solvent without adding solute. Adding water to a concentrated solution to achieve the required concentration is a common way to create a solution of a specific concentration. Dilution is the technical term for this process. Dilution can also be achieved by mixing high and low concentration solutions. Stock solutions are often purchased and stored at high concentrations, requiring dilution of the solution as a laboratory procedure. Solutions must be accurately diluted to known low concentrations prior to laboratory use.

Dilution Formula

Dilution is the process of adding solvent to a solution to reduce the concentration of solutes.

molarity = moles of solute / liters of solution

moles of solute = (molarity)(liters of solution)

moles of solute = MV

The initial and final conditions are expressed numerically,

M₁V₁= M₂V₂

In form of concentration equation will write as C₁V₁= C₂V₂

To learn more about Dilution method , refer:

https://brainly.com/question/11026427

#SPJ4

Apply to a gas molecule's kinetic energy is not the same as telling you the speed, so calling a thermometer a speedometer for atoms is deceptive.

Uniformly, if a sample of water is put down in the freezer, its molecules begin to move slower (with a lower speed) and this is thought the back by a lower thermometer reading. It is in this feeling that a thermometer can be thought of as a speedometer. As John Rennie broaches in the comments, thermometers work for solids, liquids, and gasses, whereas the temperature is comparable to the average. A thermometer would be an average speedometer for the primary molecules of a substance or structure, not specifically separate atoms.

So we can conclude that thermometers compute the average velocity of atoms in a given material or order volume.

Learn more about thermometers here: https://brainly.com/question/2339046

#SPJ1

2.00 [H3PO4] [H₂ PO] = 2.00 X [H₂ PO₁]

The first dissociation of phosphoric acid involves the species phosphoric acid, H2 PO4, and dihydrogen phosphate, H2 PO. The formula for the acid dissociation constant is: Ka, =2.42

the logarithm of the log On both sides of the mentioned equation, ka1 =

Pн = PKA + log [H, PO4)

Using definitions

[H3PO4] The renderson equation mentioned above will be utilized to determine the relative concentrations. log PH - Pka, 2.42; [H2 PO] =0.3

I log x = 2 = 109

Thus, X= 2.00 [H3PO4] [H₂ PO] = 2.00 X [H₂ PO₁]

Dihydrogen phosphate is present at higher concentrations than phosphoric acid.

learn more about concentrations here:

https://brainly.com/question/13872928

#SPJ4

The masses of the solutions are; 0.34 g, 0.95 g and 2.9 g respectively.

We know that in the process of electrolysis, it is possible that we can be able to deposit a given mass of the metal when we pass a direct current through the solution.

We then have;

Quantity of current passed through each solution = 100 * 10^-3 A * 4 * 60 * 60 = 1440 C

Solution 1;

23 g of sodium is deposited by 96500 C

x is deposited by 1440 C

x = 0.34 g

Solution 2

63.5 g is deposited by 96500 C

x is deposited by 1440 C

x = 0.95 g

Solution 3;

197 g is deposited by 96500

x is deposited by 1440 C

x = 2.9 g

Learn more about electroysis:https://brainly.com/question/14083730

#SPJ1

The statement best describes what Granger believes to be the major difference between man and the phoenix: that the phoenix recognizes when they have made a mistake and eventually will learn not to repeat it. Meanwhile, although a man recognizes his fault, he will continue to repeat them.

What does Granger say about the men and phoenix comparison?

Phoenix is a mythological creature that would burn itself to death only to be reborn from the ashes. As well as humans, we tend to cyclically destroy ourselves and our societies only to build them up again. Granger hopes that eventually, men will learn the lessons from history and stop destroying society.

Learn more about philosophy here https://brainly.com/question/27990948

#SPJ4

In alpha decay both the atomic number and mass number of the atom changes. Whereas, for beta decay only atomic number changes. The horizontal change is representing the change in atomic number and vertical change is for mass number.

Radioactive decay is the process of nuclear decay of an unstable radioactive atom by the emission of charged particles such as alpha, beta or gamma to form a stable isotope.

The nuclear decay by the emission alpha particle is called alpha decay in which the mass number decreases by 4 units and atomic number changes by 2 units. Hence the graph of alpha decay shows both vertical and horizontal change.

In beta decay beta particles are emitted where, no change occurs in mass number but atomic number increases by one. Hence, the graph will only shows the horizontal change.

To find more about radioactive decay, refer here:

https://brainly.com/question/1770619

#SPJ1

Iron bromide will form principate during the reaction.

When cations as well as anions in an aqueous solution combine to generate a precipitate, an insoluble solid, precipitation processes take place.

When target ion concentrations were identical, the ion that forms the poorest soluble compound would precipitate initially (at the lowest counter ion concentration), followed by the other ions as when the solubilities of respective compounds are attained.

When fe2(co3)3 reacts with mgbr2 then it will form iron bromide and magnesium carbonate.

Its chemical reaction can be written as:

[tex]Fe_{2}CO_{3} +MgBr_{2}[/tex] →[tex]FeBr_{3} +MgCO_{3}[/tex]

Here, magnesium carbonate will form ppt because it it will be a insoluble.

That's why it can be said that it will form ppt during the reaction.

To know more about precipitate

https://brainly.com/question/15119197

#SPJ4

The rate constant for the reaction is the relation between the concentration of the reactant and the chemical rate of reaction.

The rate constant of the chemical reaction is the proportionality constant  that describes the relationship between the concentration of the reactants and the chemical rate of reaction. The symbol of rate constant is k. Rate is depends on the temperature.  unit for the zero order reaction is : L⁻¹ s⁻¹. unit of rate constant for the first order reaction is : s⁻¹. unit for the rate constant for second order reaction is : mol⁻¹ L s⁻¹.

Thus, The rate constant for the reaction is the relation between the concentration of the reaction and the chemical rate of reaction.

To learn more about rate constant here

https://brainly.com/question/20305871

#SPJ4

The concentration of H₃PO₄ that is needed to neutralize 17.61 ml of 2.869 m NaOH when 31.16 ml of H₃PO₄ is used is 0.540 M.

The balanced equation is given as :

H₃PO₄    +   3NaOH    ------>  Na₃PO₄   +   3H₂O

number of  moles of  NaOH = 0.0176 × 2.869

                                  = 0.050 mol

moles of moles of  H₃PO₄  needed = 0.050 / 3 =0.0168 mol

molarity of  H₃PO₄  = moles / volume in L

                                = 0.0168 / 0.0311

                                = 0.540 M

Thus,  The concentration of H₃PO₄ that is needed to neutralize 17.61 ml of 2.869 m NaOH when 31.16 ml of H₃PO₄ is used is 0.540 M.

To learn more about molarity here

https://brainly.com/question/8732513

#SPJ4

The molarity or the molar concentration of the KOH solution is 0.18M.

The equation of reaction for KOH and HCl is,

KOH + HCl → KCl + H₂O

As we can see,

Moles of KOH = Moles of HCl.

We also know,

Moles = molarity x volume.

Molarity of KOH x Volume of KOH = Molarity of HCl x Volume of HCl

Volume of KOH is 25 ml.

Molarity of HCl is 0.212M.

Volume of HCl is 21.83 ml.

Putting values,

Molarity of KOH x 25 = 0.2120 x 21.83

Molarity of KOH = 0.18M.

The concentration of KOH solution is 0.18M/.

To know more about molarity, visit,

https://brainly.com/question/26255204

#SPJ4

The result of the test is that the smaller object will have a greater change in motion. Option A

In the simplest sense of the word, a force could be regarded as a push or a pull. We can see that the object irrespective of the mass of the object would continue to be at rest until it is acted upon by a force.

In this question, we are told that Joey is thinking about applying an equal push force to two objects, one with a small mass, and one with a large mass. The force that could move the small mass may not move the large mass due to inertia.

Learn more about inertia:https://brainly.com/question/3268780

#SPJ1

The energy of a photon whose frequency is 5.94 × 10¹⁷ Hz is 3.94 × 10-¹⁶J.

The energy of a photon wave can be calculated by using the following formula:

E = hf

Where;

According to this question, a photon has a frequency of 5.94 x 10¹⁷ Hz. The energy can be calculated as follows:

E = 6.626 × 10-³⁴J/s × 5.94 x 10¹⁷ Hz

E = 3.94 × 10-¹⁶J

Therefore, 3.94 × 10-¹⁶J is the energy of the photon.

Learn more about energy at: https://brainly.com/question/2393994

#SPJ1

The new pressure will be 1.45atm.

Ideal gas equation gave a relation between pressure, temperature and volume. It can be expressed as:

PV=nRT

Where, P is pressure, V is volume and T is temperature

The given data:

[tex]T_{1}[/tex] = 280K

[tex]T_{2}[/tex]= 406K

[tex]P_{1}[/tex] = 1 atm

[tex]P_{2}[/tex] = ?

The amount of unknown pressure can be determined by using the formula:

P1/T1=P2/T2....(i)

Now, put the values of given data in above equation.

P2= P1T2/T1

P2=1×406K / 280

P2 = 1.45atm

Therefore, the new pressure will be 1.45atm

To know more about pressure.

https://brainly.com/question/26205593

#SPJ4