are the following materials (a) pure substances, (b) homogenous mixtures, or (c) heterogenous mixtrues?

2Al + 3Br[tex]_{2}[/tex] ⇒2AlBr[tex]_{3}[/tex]

According to the video, refilling a used chemical container should never be done because it could lead to contamination and possible safety hazards.

What is contamination?

Contamination is the presence of an ingredient, impurity or other undesirable element that spoils, corrupts, infects, renders unsuitable or inferior a material, physical body, natural environment, workplace, etc.

In chemistry, the term "contamination" typically refers to a single component, but in some specialised fields, it can also refer to chemical mixtures, even down to the level of cellular materials. There are impurities in all chemicals to some extent. If the impure chemical produces additional chemical reactions when combined with other chemicals or mixtures, contamination may be detected or not and may become a problem.

The term "contaminant" may be changed to "reactant" or "catalyst" in cases where the chemical reactions brought on by the presence of an impurity are advantageous. Depending on the type of molecule involved, additional terms like "toxin," "poison," or "pollutant" are frequently used if the additional reactions are harmful.

To know more about contamination, click the link given below:

https://brainly.com/question/29851759

#SPJ4

The density of gas is material f

To learn more about density of a gas refers to:

brainly.com/question/28380933

#SPJ1

Benzophenone will show absorption at 1720 cm-1, while benzaldehyde will show absorptions at 1600 and 1650 cm-1. Additionally, benzophenone will show absorption at 1865 cm1 and benzaldehyde will show absorptions at 2820 and 2720 cm1.

These absorption peaks can be used to distinguish between the two compounds using IR spectroscopy.

Benzophenone has a carbonyl group and shows an absorption peak at 1720 cm1, which corresponds to the C=O stretching frequency. Benzaldehyde has an aldehyde group and shows absorption peaks at 1600 and 1650 cm-1, which correspond to the C=C stretching frequency and the C-H bending frequency, respectively.

Additionally, benzophenone has a phenyl ring, which gives a peak at 1865 cm1, and benzaldehyde has a C-H stretching, giving peaks at 2820 and 2720 cm1.

Learn more about Benzophenone:

https://brainly.com/question/29753353

#SPJ4

To build a single bond in a ball-and-stick model, you need to use a single line or bond to connect the atoms in a ball-and-stick model.

In a ball-and-stick model, atoms are represented by small spheres or balls, and chemical bonds are represented by lines or sticks connecting the balls. A single bond is a chemical bond in which two atoms share one pair of electrons. In a ball-and-stick model, a single bond is represented by a single line connecting the two atoms. This is different from a double bond, which is represented by two lines connecting the atoms and a triple bond, which is represented by three lines connecting the atoms.

Learn more about ball-and-stick model here:

https://brainly.com/question/16570235

#SPJ4

Option 1 is correct answer.

To learn more about density refers to;

https://brainly.com/question/11301516

#SPJ1

Answer:

Polarity

Explanation: Because of its polarity and ability to form hydrogen bonds, water makes an excellent solvent, meaning that it can dissolve many different kinds of molecules.

In one mole of water there are considered to be two moles of hydrogen because there are two atoms of hydrogen present in the water molecule H₂O.

As it is known that one mole of water contains 6.022 X 10²³ molecules. Each H₂O molecule has two atoms h hydrogen and one atom of oxygen. Therefore, in one mole of water, there are two moles of hydrogen and one mole of oxygen atom.

All this is explained under the concept of mole and molar mass.

The mole concept is a method for determining the mass of chemical substances based on their requirements, and the entire mole concept revolves around 12 grams of the carbon isotope 12C. The mass of one atom of carbon-12 element was determined to be 1.99 X 1023 g using a mass spectrometer. Because one mole of Carbon-12 atom weighs 12g, the number of atoms in it is equal to :

12g/mol / 1.99 X 10²³ g/atom = 6.022 X 10²³ atoms/mol.

This is commonly referred to as Avogadro's Number.

Learn more about Avogadro's Number here:

https://brainly.com/question/28812626

#SPJ4

To solve this we must be knowing each and every concept related to  power plants. Therefore, in above given ways the  advantage of power plants powered by natural gas can be compared to coal and oil.

A power plant is a type of industrial facility that produces electricity using primary energy. The majority of power plants employ one or more generators to transform mechanical energy into electricity in order to offer electricity towards the electrical grid for societal purposes.

Natural gas's future position in global energy is intrinsically related to its potential to assist address environmental issues. With concern about air quality with climate change approaching, natural gas has the potential to provide several advantages if it replaces more polluting fuels.

Therefore, in above given ways the  advantage of power plants powered by natural gas can be compared to coal and oil.

To know more about power plants, here:

https://brainly.com/question/10427972

#SPJ1

The initial and final pH after adding 0.010 mol of HCI.

a. Initial pH = 7.00; Final pH = 2.30

b. Initial pH: 4.75; Final pH: 4.26

c. Initial pH: 9.45; Final pH: 8.98

Initial pH is the starting pH of a solution before any reaction has taken place. Final pH is the ending pH of a solution after a reaction has occurred. The pH of a solution can be determined using a pH meter or litmus paper.

a. The addition of 0.010 moles of HCl will reduce the pH of the pure water from 7.00 to 2.30.

b. The addition of 0.010 moles of HCl will reduce the pH of the buffer solution from 4.75 to 4.26. This is due to the buffering effect of the HC2H3O2 and NaC2H3O2, which will react with the HCl to prevent the pH from dropping too much.

c. The addition of 0.010 moles of HCl will reduce the pH of the buffer solution from 9.45 to 8.98. This is due to the buffering effect of the C2H5NH2 and C2H5NH3Cl, which will react with the HCl to prevent the pH from dropping too much.

To learn more about pH refer to:

https://brainly.com/question/22390063

#SPJ1

When methane (CH4) reacts with oxygen (O2), it produces carbon dioxide (CO2) and water vapor (H2O) through a chemical process called combustion.  CH4 + 2O2 -> CO2 + 2H2O + heat energy

Methane is a hydrocarbon and is a major component of natural gas. The oxygen (O2) is typically provided by the air we breath. The heat energy released in this reaction is used for many industrial and domestic applications, such as heating, transportation, and power generation. However, it's important to note that the combustion of fossil fuels, such as methane, can have a negative impact on the environment and human health if not properly controlled due to the emissions of CO2 and other pollutants.

To know more about O2 please refer: https://brainly.com/question/10685852

#SPJ4

The "The Chrysanthemums" is a short story by John Steinbeck. The symbolism of the chrysanthemums in the story is open to interpretation, but they are often seen as representing the protagonist Elisa's repressed sexuality and desire for a fulfilling life.

In the story, Elisa is described as a passionate gardener who takes great care in growing her chrysanthemums, but her efforts are often overlooked and underappreciated by her husband and the society in which she lives. The chrysanthemums represent Elisa's own life, as she feels trapped and unfulfilled in her domestic role.

For example, when Elisa shows her chrysanthemums to a tinker, she says, "I wish you could take them away with you. I wish I could do something for you, something important. These flowers aren't enough." This statement underscores the sense of frustration and unfulfillment that Elisa feels, as her nurturing of the chrysanthemums is a symbol of her own unrealized potential.

Overall, the chrysanthemums in "The Chrysanthemums" can be seen as a symbol of Elisa's unfulfilled desires and the frustration she feels with her limited role in society, as well as a manifestation of her inner strength and resilience.

learn more about The Chrysanthemums here:https://brainly.com/question/29406923

#SPJ4

An inorganic, naturally occurring, homogenous solid having a specific chemical makeup and organised (crystalline) atomic structures is referred to as a mineral.

Neither organic life nor the goods made from or by organic life are included in the term "inorganic."

Natural Formation: A mineral must develop naturally; it cannot be fabricated, manufactured, or produced in a laboratory.

A mineral must be chemically and physically uniform at the atomic level to be considered a homogeneous solid.

Due to the mineral's uniformity, its physical characteristics—such as hardness, density, and streak—are entirely predictable.

When a mineral has a defined chemical composition, all of its occurrences fall within a narrow range of chemical composition variations and the atoms that make up the mineral must exist in a predetermined arrangement.atomic structure with order

Learn more about mineral:

https://brainly.com/question/29970865

#SPJ4

The molecular geometry of the [tex]ax^{3}[/tex]  molecule is trigonal planar. This is represented in the VSEPR model.

The molecular geometry can be represented by the VSEPR model. This model can predict the structure of nearly any molecule or polyatomic ion in which the central atom. VSEPR model predicts the geometry of the polyatomic molecules and ions. It focuses only on the number of electron pairs around the central atom, The [tex]ax^{3}[/tex] molecule is made up of 3 equally spaced sp2 hybrid orbitals arranged at the angle of 120 degree. The shape of this orbitals is planar triangular. There is an atom at the end of each orbital. The shape of the molecule is planar triangular.

To learn more about VSEPR model please visit:

https://brainly.com/question/20195039

#SPJ4

The basic first aid procedure for any chemical splash includes washing the affected area for at least 20 minutes with water

If a person experiences a chemical splash  the first step in providing first aid is to remove any contaminated clothing and wash the affected area thoroughly with water for at least 20 minutes. This will help to remove as much of the chemical as possible and prevent further chemical absorption through the skin. If the chemical is a strong acid or base, it's recommended to neutralize the chemical by rinsing with a solution of baking soda or vinegar.

It is also important to seek medical attention immediately after washing the affected area. If the chemical has caused damage to the eyes, the person should be transported to a hospital as soon as possible. If the person has inhaled fumes, they should be moved to a location with fresh air and seek medical attention if they have any difficulty breathing.

Learn more about first aid here:

https://brainly.com/question/27974849

#SPJ4

Answer:

2x+nm^3

Explanation:

The correct reading for the graduated cylinder in the close-up is 40.5. The correct answer is the last answer.

The reading for graduated cylinder we can se that is 40 but it exces half of the scale a 50-mL graduated cylinder contains markings every 1 mL so we  simply use the reading as the nearest marking 0.5 so 40+ 0.5 = 40.5.

reading for graduate sylinder depends on the size of the graduated cylinder and the space between the marks. In general, you can interpolate (guess) to somewhat boost precision beyond the volume markers, but whether it will give you an extra sig fig varies.

A 10-mL graduated cylinder, for instance, has marks every 0.1 mL. If you merely use the reading as the closest marking, such as 4.5 mL, 9.7 mL, etc., your reading will have two sig figs. However, by interpolating, you can improve your accuracy a little bit. How near is the liquid level to the markings' halfway point

learn more about  graduated cylinder at https://brainly.com/question/14427988

#SPJ4

The cool water typically enters the condenser through an inlet at the bottom or side of the device. The water is then circulated through the condenser using a pump, and exits the condenser through an outlet at the top or side.

The purpose of the cool water is to condense the hot vapor coming from the distilling flask by providing a cool surface for the vapor to come into contact with. As the vapor cools and condenses, it turns back into a liquid, which can then be collected for further use or analysis. By using cool water to condense the vapor, the process can be made more efficient, and the temperature of the distillate can be controlled. Additionally, by controlling the temperature of the condenser, it is possible to selectively separate certain components of the mixture being distilled, based on their relative boiling points.

Learn more about Vapor here: brainly.com/question/2693029

#SPJ4

The mass percent of vitamin c is 39.34 % and sucralose is 60.66 % in the sample.

Π = iMRT (Osmotic pressure)

i = 1 (van't Hoff factor)

M = moles/ volume

Now,

ππ= inVRT ----> (1)

R = 0.0821 L.atmK-1mol-1  

T = 301K

Volume is equal to 34.3 mL in liters it is equal to 0.0343 L

Now, from equation (1)

n = (π × .0343 L) / (1× 0.0821 L.atmK-1mol-1 × 301 K)

Mole = 0.00436 moles

Considering that sucralose has a mass of Y g and vitamin C has a mass of X g and given the number of samples,

e = 1.182 g

X + Y = 1.182 g

Y = 1.182 g - X ----> (2)

Since sucralose has a molecular weight of 398 g/mol and vitamin C (VC) has a molecular mass of 176 g/mol. Therefore, the total number of moles is equal to the sum of the moles of VC and sucralose.

0.00436 moles = X/176 + (1.149 - X)/398 70048(0.00436) = 398 X + 176(1.149 - X)

222 X = 103.18528

X = 0.465 gram

Now from eq ( 2) ;

Y = 1.182g - 0465 g

Y = 0.717 gram

so Vitamin C Mass Percentage = 0.465g × 100 / 1.182g

= 39.34 %

Mass percentage of sucralose = 0.717g ×100 / 1.182g

= 60.66 %

Want to know more about mass percent visit the link which is given below;

https://brainly.com/question/5394922

#SPJ4

An atom is the smallest unit of matter that retains the properties of an element. Atoms are composed of three parts: protons, neutrons, and electrons.

Protons and neutrons form the nucleus of an atom, while electrons orbit the nucleus in a cloud-like pattern. Atoms are not visible to the eye and are instead measured in nanometers (1 nanometer = 0.000000001 meters).

Atoms are the building blocks of all elements and form all types of molecules, which are the building blocks of matter. Atoms are also the smallest components of matter that can be isolated and identified.

Learn more about atoms:

https://brainly.com/question/1494948

#SPJ4

The statement that correctly compares how adding energy affects a substance during a phase change is as follows: Particles overcome forces of attraction and the temperature rises (option A).

Phase change is a physical process in which a substance goes from one phase to another.

The change usually occurs when adding or removing heat at a particular temperature, known as the melting point or the boiling point of the substance.

This means that when energy is added to a substance (melting), the temperature rises and the particles overcome forces of attraction.

Learn more about phase change at: https://brainly.com/question/12390797

#SPJ1

5 atoms are present in 4 moles of methane (CH₄).

Atoms are the smallest unit in which matter can be divided without the release of electrically charged particles. It is also the smallest unit of matter that has the characteristic properties of a chemical element.

Methane is a chemical compound having chemical formula CH₄ (one carbon atom is bonded to the four hydrogen atoms). It is a group-14 hydride, the simplest alkane, and the main constituent of a natural gas.

One molecule of the methane having 5 atoms

So 1 mole of methane will have = 5 × 6.022 × 10²³ atoms.

Therefore, 4 moles of methane will have = 4 × 5 × 6.022 × 10²³ atoms.

To know more about atoms here

https://brainly.com/question/29695801

#SPJ4

When the number of moles is less than 0.35 Therefore, KMnO4 will not dissolve because the number of moles is less than 0.35 mol.

One mole of any substance is equal to 6.023 × 10²³ units of that substance such as atoms, molecules, or ions. The number 6.023 × 10²³ is called as Avogadro's number or Avogadro's constant.

The mole concept can be used to convert between mass and number of particles.

When we know that the solubility of KMnO4 is 6.4 g/100mL

Therefore, 6.49 g → solve in 100mL

        ?      ←  solve in 500mL

The amount of KMO4 soluble in 500mL

= (500X 6.49) /100

= 32.45 g

The molar mass of the KMnO4 = 158/mol

we can get the number of moles of KMnO4 = mass of KMnO4 / molar mass of KMnO4

number of moles of KMnO4 = 32.45 / 158

= 0.2 mol

Thus, When the number of moles is less than 0.35 Therefore, KMnO4 will not dissolve because the number of moles is less than 0.35 mol.

To learn more about the mole, follow the link;

https://brainly.com/question/26416088

#SPJ1

In two moles of CH4, the number of hydrogen atoms are 4.8 x 1024 hydrogen atoms.

The number of hydrogen atoms is also the equivalent of eight moles of hydrogen atoms. We can calculate the number of atoms using Avogadro's number. The atomic mass of methane (CH4)is 12 amu for the carbon + four x 1 amu for the 4 hydrogens, for a complete of sixteen amu. Therefore the molar mass of methane is 16g. We say that one mole of methane has a mass of sixteen g, and that there are 6.022 x 1023 atoms in that mass of methane.

Thus, the number of hydrogen atoms are 4.8 x 1024.

To learn more about Avogadro's number check the link below:

https://brainly.com/question/859564

#SPJ4

This is equivalent to CHCl3 in the chloroform solvent (CDCl3), and a singlet signal is seen at 7.26 ppm. This is CHD2OD for the methanol solvent, and at 3.31 ppm a 1:2:3:2:1 pentet signal is seen.

Chloroform is a solvent, or a chemical that aids in the dissolution of other compounds. It is also employed in the manufacture of pesticides and films, as well as in the construction, paper, and board industries. For lacquers, floor polishes, resins, adhesives, alkaloids, fats, oils, and rubber, it serves as a solvent.

It can harm the nervous system, the liver, the kidneys, the eyes, the skin, and the skin. Chloroform may be hazardous if inhaled or consumed. The exposure to chloroform itself has been connected to cancer. There is a chance that workers will be exposed.

To know more about chloroform solvent visit:

https://brainly.com/question/25116374

#SPJ4

Both a reaction that uses oxygen and releases heat and light energy is respiration. Both a reaction in which plants absorb energy from the Sun is photosynthesis. Both a reaction carried out by cells that use oxygen and release energy is combustion reaction.

Respiration: glucose + oxygen → carbon dioxide + water + energy

The cellular respiration process produces ATP with the breakdown of the glucose and oxygen. During the process of respiration , carbon dioxide is formed along with water and energy.

Photosynthesis : water + carbon dioxide + sunlight → oxygen + glucose

Plants uses the light energy from the sun in the presence of water and carbon dioxide and forms food by the process of photosynthesis. It forms glucose and oxygen.

Combustion reaction: methane + oxygen → water + carbon dioxide + heat

Combustion reaction is a chemical reaction in which methane is the main substance. Combustion takes place as things burn in the presence of methane and oxygen to produce carbon dioxide, water and heat.

Thus, to learn more about the respiration, follow the link;

https://brainly.com/question/12605249

#SPJ1

The best method of thawing the frozen foods is to thaw in the refrigerator where it will remain at the constant temperature that is below 40 degree Fahrenheit.

Thawing procedure is the process of warming food that has been frozen so that the food can be eaten or prepared to be served. For thawing are four ways in which to defrost food safely. Those are thawing in the refrigerator, in the microwave, as part of the cooking process or under cold running water. Cold running water thawing method is faster than refrigerator thawing but requires more attention. Thawing food in a microwave needs a plan to cook it immediately after thawing because some areas of the food may become warm and begin to cook during the thawing process.

To learn more about Thawing procedure for frozen food please visit:

https://brainly.com/question/11887260

#SPJ4

Answer:

250m/s

Explanation:

velocity formula is distance (m) over time(s)

3000 / 12 = 250

Answer: Your answer is 250m/s

Explanation: V= d/t

V= velocity

d= distance

t= time

So, 3000 meters divided by 12 seconds = 250 meters per second

Two moles of water are produced by the combustion of 2.00 mol of methane.

The combustion of methane means that it's possible to burn it. Chemically, this combustion process consists of a response between methane and oxygen in the air. When this response takes place, the result is CO2, H2O, and a great deal of energy. The following response represents the combustion of methaneCH4+ 2 O2-> CO2+ 2 H2O+ energy. One patch of methane, combined with two oxygen moles, reply to form a carbon dioxide patch, and two water moles generally given off as brume or water vapor during the response and energy.

Learn more about moles here:

https://brainly.com/question/29367909

#SPJ4