Answer: [tex]ZnBr_2\rightarrow Zn^{2+}+2Br^-[/tex]
Explanation:
For formation of a neutral ionic compound, the charges on cation and anion must be balanced. The cation is formed by loss of electrons by metals and anions are formed by gain of electrons by non metals.
Here zinc is having an oxidation state of +2 called as [tex]Zn^{2+}[/tex] cation and bromide is an anion with oxidation state of -1. Thus 2 atoms of [tex]Br^-[/tex] will combine with one [tex]Zn^{2+}[/tex] and written in simplest whole number ratios to give neutral [tex]ZnBr_2[/tex]
[tex]ZnBr_2\rightarrow Zn^{2+}+2Br^-[/tex]
hurry
A solution:
A. is a mixture that is made when a solid dissolves and combines with a liquid.
B. is the amount of a substance that will combine with another substance before they begin to chemically combine.
C. is the amount of a substance that will dissolve in 1 dm3 of water at 25 C .
D. is two or more substances that are combined together but not chemically joined.
Reset Selection
Answer:
b is the correct answer ok
A solution is made up of solute and solvent. It is an addition of two or more substances to each other that combines physically and chemically. Thus, option B is correct.
What is a solution?A solution is the mixture of solutes that can be more than one in a solvent that has the same composition all over (homogenous). A solution comprises two main elements called a solute and a solvent.
A solute is the part of the solution that has been added to the solvent for desolvation. On the other hand, the solvent is the substance that dissolves the solute in them to make a solution.
The homogenous mixture or the solution can be created by mixing salt and water, sugar and water, mercury in amalgamated zinc, coffee, vinegar, etc.
Therefore, option B. a solution is the addition of the substances that combine physically.
Learn more about solutions here:
https://brainly.com/question/13790411
#SPJ2
Convert 16.7 inches to yards (there are 3 feet in a yard)
Using the method of dimensional analysis
Answer:
Explanation:
16.7 inches [1 foot / 12 inches] [1 yard / 3 feet] Notice how the units cancel each other out. You do have numbers in the denominator. What you get, looks like this
16.7
------
(12 * 3)
16.7 / 36
0.4639 yrds
What is the order, plz answer
Answer:
C A B
Explanation:
come on, you also know this from normal water waves.
which ones are stronger (= have more energy) ? the small ones or the big ones ?
and the same applies to all waves. the bigger the waves (higher amplitude), the more energy.
PLZ HELP ME A single bacterial cell divides to make new bacterial cells. Which of the following is true of this kind of reproduction? A Two parents come together to produce offspring with different characteristics
B. Two parents come together to produce offspring that are exact copies of one parent
C One parent produces offspring that are exact copies of the parent
D. One parent produces of sening with different charactenstes SUERT
Answer:
its C
Explanation:
what are two consents in this experiment
The number of cricket chirps
The temperature of each container
The kind of containers used
The number of crickets in each container
Answer:
the number of crickets in each container
Explanation:
to participate in the experiment you will have to know the crickets in the container
Cho 17,7 gam kim loại Fe tác dụng với dung dịch HCl loãng, dư thu được V lít khí H2
a) Viết PTHH và tính giá trụ của V
b) Cho lượng Fe ở trên tác dụng với dung dịch H2SO4 đặc nóng, dư thấy thoát ra V1 lít khí SO2. Viết PTHH và tính giá trị của V1
Answer:
A
Explanation:
خثحصزصزصوصخصزصنثهبخبخلنلولزفكقطيجحسظصمصمسنيبنبهؤخءمقز
Match the chemical equation with the correct reaction type:
Column A
Column B
1.
Fe +52 - Fe253
2.
Pb(NO3)2 + K2CrO 4 PbCrO 4 +KNO3
a. single replacement
b. double replacement
C. decomposition
3.
H2 + N2 + NH3
d. combustion
4.
Fe + CuCl2 - FeCl2 + Cu
e synthesis
5.
KCIO3 -KCI + O2
6.
Mg + HCI-H2 + MgCl2
7.
C3Hg + O2 CO2 + H2O
8.
Zn + HCI - ZnCl2 + H2
9.
NH3-N2 + O2
10.
AgNO3 + Cu Cu(NO3)2 + Ag
f70X
1.
Fe +52 - Fe253
SYNTHESIS REACTION
A synthesis reaction occurs when two or more reactants combine to form a single product.
2.
Pb(NO3)2 + K2CrO 4 PbCrO 4 +KNO3
DOUBLE REPLACEMENT
A double-replacement reaction exchanges the cations (or the anions) of two ionic compounds.
3.
H2 + N2 + NH3
SYNTHESIS REACTION
A synthesis reaction occurs when two or more reactants combine to form a single product.
4.
Fe + CuCl2 - FeCl2 + Cu
SINGLE REPLACEMENT
A single-displacement reaction, is a chemical reaction in which one element replaces an/other element in a compound.
Note. An element can only replace an element that it is higher than in the electrochemical series or an element that is less reactive than itself.
5.
KCIO3 -KCI + O2
DECOMPOSITION REACTION
A decomposition reaction is a reaction in which a compound breaks down into two or more simpler substances.
Most times this type of reaction requires an in put of energy.
It is usually an endothermic reaction as heat is mostly absorbed.
6.
Mg + HCI-H2 + MgCl2
SINGLE REPLACEMENT
A single-displacement reaction, is a chemical reaction in which one element replaces an/other element in a compound.
Note. An element can only replace an element that it is higher than in the electrochemical series or an element that is less reactive than itself.
7.
C3Hg + O2 CO2 + H2O
COMBUSTION REACTION
Combustion reaction is a high-temperature exothermic redox chemical reaction between a fuel (example propane C3H8) and an oxidant, usually atmospheric oxygen, that produces oxidized, often gaseous products.( mostly C02)
It can also be referred to as burning.
Combustion reaction is one of the chemical characteristics of hydrocarbons.
8.
Zn + HCI - ZnCl2 + H2
SINGLE REPLACEMENT
A single-displacement reaction, is a chemical reaction in which one element replaces an/other element in a compound.
Note. An element can only replace an element that it is higher than in the electrochemical series or an element that is less reactive than itself.
9.
NH3-N2 + O2
DECOMPOSITION REACTION
A decomposition reaction is a reaction in which a compound breaks down into two or more simpler substances.
Most times this type of reaction requires an in put of energy.
It is usually an endothermic reaction as heat is mostly absorbed.
10.
AgNO3 + Cu Cu(NO3)2 + Ag
f70X
SINGLE REPLACEMENT
A single-displacement reaction, is a chemical reaction in which one element replaces an/other element in a compound.
Note. An element can only replace an element that it is higher than in the electrochemical series or an element that is less reactive than itself.
In 1838 botanist Matthias Schleiden determined that all plants are composed of cells. In 1839, anatomist Theodor Schwann proposed that all animals are composed of cells. In 1855, biologist Rudolph Virchow added to Schleiden's and Schwann's observations and proposed that all living things are composed of cells. Which statement is also part of Virchow's cell theory?
Answer:
cells arose from preexisting cells
Explanation:
Rudolph Virchow is a German biologist that built on the work of other scientists such as Theodor Schwan to contribute his own quota to the development of the cell theory as it is currently known.
After several studies, Virchow rejected the idea of spontaneous generation and accepted the initially rejected idea of cell division. He earlier believed that cell division only takes place is some special type of cells and not in all cells.
Even though Virchow was not the first to bring the idea of cells arising from preexisting cells, he was the one that popularized the idea and added it to the earlier belief that all living organisms are made up of cells.
Answer:
B
Explanation:
[tex]v=0.164m*8.3cm*12.4cm[/tex]
Answer:
helloooo
0.164m * 100 = 16.4 cm
now multiplying all of em
v = 1,687.888
If 25.0 g of carbon monoxide react with 8.50 g of ammonia and 10.0 g of hydrogen to produce water and acetonitrile (CH3CN), what mass of each excess reactant is left over after the reaction is complete?
Answer:
The mass of NH₃ left over = 0.91 g of NH₃
The mass of H₂ left over = 8.2 g of H₂
Explanation:
The given information are;
The mass of the carbon monoxide present in the reaction = 25.0 g
The mass of the ammonia present in the reaction = 8.50 g
The mass of the hydrogen present in the reaction = 10.0 g
The above masses reacts to produce water and acetonitrile (CH₃CN)
The balanced chemical equation for the reaction is given as follows;
2CO + NH₃ + 2H₂ → CH₃CN + 2H₂O
Therefore, two moles of CO reacts with one mole of NH₃ and two moles of H₂ to produce one mole of CH₃CN and two moles of H₂O
The molar mass of CO = 28.01 g/mol
The molar mass of NH₃ = 17.031 g/mol
The molar mass of H₂ = 2.0159 g/mol
The molar mass of H₂O = 18.015 g/mol
The molar mass of CH₃CN = 41.05 g/mol
The number of moles of CO present = 25/28.01 = 0.893 moles
The number of moles of NH₃ present = 8.5/17.031 = 0.5 moles
The number of moles of H₂ present = 10/2.0159 = 4.96 moles
Therefore, 0.893 moles of CO reacts with 0.893/2 mole of NH₃ and 0.893 moles of H₂ to produce 0.893/2 mole of CH₃CN and 0.893 moles of H₂O
The excess reactants left are;
0.5 - 0.893/2 = 0.0535 moles of NH₃ with mass 0.0535 × 17.031 = 0.91 g
4.96 - 0.893 = 4.067 moles of H₂ with mass 4.067 × 2.0159 = 8.2 g
The mass of NH₃ left over = 0.91 g of NH₃
The mass of H₂ left over = 8.2 g of H₂.
What is the complete ionic equation for this reaction?
2KOH(aq) + H2SO4(aq) → 2H20(1) + K2SO4(aq)
O A. 2K+ + OH + H2SO4 → OH + 2H+ + K2SO4
B. OH + 2H+ + 2H20()
C. 2KOH + H2SO4 → 2H20 + K2SO4
D. 2K+ + OH + 2H+ + SO42- → 2H20() + 2K+ + SO42-
SUBMIT
Answer:
The answer is "Option D".
Explanation:
The entire ionic equation for all the substances, which are ionic compounds but are available in an aquatic is represented in the form with ions in the full ionic equation.
In the Net ionic equation, it doesn't have the particulate matter throughout the net ionic equations throughout the equations.
In the Spectator ions, it doesn't participate in interactions mostly on reaction and the material hand. From both sides, the very same ions are present.
The evenly balanced chemical formula is,
[tex]2KOH (aq)+ H_2SO_4(aq) \longrightarrow 2H_2O(l) + K_2SO_4[/tex]
It is the separate organic compound that full ion formula will match the choice D.
If the red car travels from 50 m to -25 m in 5 seconds, what is its velocity?
Answer:
V = 14m/s
Explanation:
velocity is the rate of change in displacement
V = (change in displacement)/time
V = (50 - (-20) )/5
V = (70)/5
V = 14m/s
Which is not a characteristic of all metals? Select one: a. soft and easy to cut b. Good electrical conductors c. Ductile and malleable
Ethane- (-89) Butane- (0) Methanol- (64.7) Hexane- (69) Pentadecane- (270) Heptadecane- (302) a) A mixture of pendtadecane and heptadecane can be separated by______ b) Which pair of compounds are easiest to separate (i) Ethane and Pentadecane (ii) Ethane and Heptadecane (iii) Butane and Hexane (iv) Butane and Heptadecane
Answer:
(ii) Ethane and Heptadecane
Explanation:
The separation of all the species listed in the answer options for the question depends on the molar mass of each specie.
Ethane is a low molecular mass gas. It exists in the gaseous state at room temperature. However, heptadecane appears as a liquid because it has a greater relative molecular mass.
It is very easily to distinguish between the gas, ethane and the liquid heptadecane which is a high molecular mass alkane, hence the answer.
You work in the special effects department of a movie studio. You are
currently working on a superhero movie where the hero is very strong
and can punch through metal. For the next scene you need to replace a
6 inch by 6 inch square of a metal wall with a different material that will
crumble when the actor hits it. What could you use?
A. You could use Carbon(C)
B. You could use Potassium (k)
C. You could use Titanium (T)
D. You could use Manganese (Mn)
Answer:
The correct option is;
D. Manganese (Mn)
Explanation:
Manganese is very brittle, hard, iron like silvery-gray metal, that is difficult to melt. In air, Manganese slowly disintegrate in a similar manner to iron rusting in water
Manganese and iron have similar chemical and physical properties however manganese is more harder and more brittle than iron
A brittle material is one that easily breaks without deforming elastically
Therefore, manganese, due to its very iron like appearance and brittle nature will be suitable to replace the metal wall and crumble easily when the actor hits it.
Which of the following is NOT the property of a non-metal? A. Non-rigid structure B. Not ductile C. Low density D. Malleable
Answer:
The answer is D.
Explanation:
Malleable is the property of metal not non-metal.
Answer:
malleable
Explanation:
because a non metal cannot be harmmed into sheetsFor the set of ionic compounds, CaSO4, CaCO3, Ca(OH)2, choose the correct characterization of their solubilities in water from the response list. Group of answer choices None of the three salts are soluble. All three salts are soluble. Two of the three salts are soluble. One of the three salts is soluble.
Answer:
None of the three salts are soluble.
Explanation:
According to the solubility rule, the carbonates and sulphates of group two elements are insoluble in water.
All three substances mentioned possess very low solubility in water and can be said to be slightly soluble in water. If we compare them with other ionic substances that dissolve readily in water, we can rightly say that they are insoluble in water.
Hence all three substances are insoluble in water.
Sulphur dioxide is a common pollutant from burning coal.State two effects caused by this pollutant and also write the chemical equation.
Heya!
Sulfur dioxide - ( SO2 )
Answer:
Sulfur dioxide is a common pollutant caused due to the burning of coal,Is very harmful for the environment and health.Effects:
Health effects-Sulfur dioxide effects the respiratory system which includes the functioning of lungs,respiratory track and causes infections,can also effect and irritate the eyes and causes aggravating conditions such as asthma and chronic bronchitis.As most sulfur dioxide air pollution comes from the burning of coal and oil in power plants. It is a emitted by trains, large ships and other diesel objects that burns alota sulfur fuel so this also effects the environment like plants and others as the air lacks oxygen ,but with more sulfur dioxide.Hope this helps!
Have a nice day!:)
Was is meant by the term suprenatural? Does science deal with the supernatural?
A. The term supernatural literally means (within nature) Science deals with the supernatural because it works within nature, not above it
B. The term supernatural literally means (above nature) Science does not deal with the supernatural because it works within nature, not above it
C. The term supernatural literally means (within nature) Science does not deal with the supernatural because it works above nature, not within it
D. The term supernatural literally means (above nature) Science deals with the supernatural because it also works with nature, not within it
Answer:
it's option D
If each geometric shape represents a different type of atom, and atoms that are touching have chemically bonded with each other, which best describes this model? * 1. An element 2. A compound 3. A homogeneous mixture of two compounds 4. A heterogeneous mixture of two compounds 5. A homogeneous mixture of four elements 6. A heterogeneous mixture of four elements
Answer:
The correct option is;
3. A homogeneous mixture of two compounds
Explanation:
An homogeneous mixture is one where the components of the mixture are evenly dispersed such that the individual components cannot be seen to be isolated and distinguishable and having a constant composition of the constituents
The image displays three atoms (red circle, cyan triangle, and orange rectangle). The red circle appear to be bonded in pairs while the cyan triangles are bonded to the orange rectangles making a total of two compounds
The arrangement of the compounds in the mixture appear to be very evenly distributed to suggest an homogeneous mixture
The visibility of the compounds should be for an illustrative purpose.
Which of the following is an example of combustion?
O A. potassium chlorate -> potassium chloride + oxygen
B. aluminum + cobalt chloride -> aluminum chloride + cobalt
O c. hexane + oxygen carbon dioxide + water
OD. sodium cyanide + hydrochloric acid -> sodium sulfate + hydrogen cyanide
CH4 + 2O2 → CO2 + 2H2O In the chemical reaction, if 10 moles of H2O are produced, moles of CO2 are also produced
Answer:
The correct answer is 5 moles of CO2 are produced.
Explanation:
The given reaction:
CH₄ (g) + 2O₂ (g) ⇔ CO₂ (g) + 2H₂O (g)
The given reaction is an illustration of a combustion reaction. Any reaction in which a substance is burnt in excess of oxygen to generate water and carbon dioxide is termed as a combustion reaction. From the given equation, it is clear that the moles of the formation of the products are in the ratio 1: 2, that is, if 10 moles of H₂O is produced, the production of 5 moles of CO₂ will be produced.
Let us multiply, the given equation with 5 we get,
5CH₄ + 10O₂ ⇔ 5CO₂ + 10H₂O
Hence, it is clear that with the formation of 10 moles of H₂O, formation of 5 moles of CO₂ will also take place.
Which element increases its oxidation number in this reaction? 3KOH + H3PO4 → K3PO4 + 3H2O
Answer:
The answer is "no changes in oxidation number "
Explanation:
Given equation:
[tex]3KOH + H_3PO_4 \longrightarrow K_3PO_4 + 3H_2O[/tex]
In the above-given equation, there are no changes in the oxidation number which can be defined as follows but first we defined the oxidation: In the chemical process, it requires the transfer of ions is oxidation. In particular, it means that products that supply electrodes are oxidized. In the given equation, when 3Potassium hydroxide reacts with phosphoric acid it will produce potassium phosphate and 3 moles of water.
which state of matter is Na OH(s)
Explanation:
SOLID
Sodium hydroxide exists in the solid phase at room temperature. You would find it in the lab as hemispherical white solid pellets. The phase of a substance depends on temperature and pressure. As you heat a solid, it will melt and change to the liquid phase.
what is mean by vector
Answer:
A quantity having direction as well as magnitude is called vector.
The melting points of ionic compounds _____
Explanation:
ionic compounds have high melting points
Which of the following properties would helium have?
A. Closely packed and structured particles
B. Fills entire container
C. Definite volume
D. Definite shape
Reset Selection
Answer:
B
Explanation:
It is a gas and therefore according to particle model of matter it has large spaces between them and does not have a definite shape
Among the following properties, Helium would fills entire container. Hence Option (B) is correct.
What is States of Matter ?
A “state of matter” is a way to describe the behaviour of atoms and molecules in a substance.
There are three common states of matter: Solids – relatively rigid, definite volume and shape. In a solid, the atoms and molecules are attached to each other. They vibrate in place but don't move around.
Helium is a gas in nature and thus fills entire container.
Therefore, Among the following properties, Helium would fills entire container. Hence Option (B) is correct.
Learn more about States of Matter here ;
https://brainly.com/question/9402776
#SPJ2
When a single salt crystal is added to a cool liquid, large crystals form. Which statement about the original cool liquid is correct?
A) The liquid is a heterogeneous mixture because the crystals can be easily separated from the liquid
B) The liquid is a pure substance because it was made up of a single compound
C) The liquid is a pure substance because it was uniform before the crystal was added
D) The liquid is a homogenous mixture because the substance that formed the large crystals was uniformly dissolved
The liquid is a homogeneous mixture because the substance that formed the large crystals was uniformly dissolved.
A solution is composed of a solute and a solvent. A solution is a typical example of a homogeneous mixture.
We define a solution as any combination of solute and solvent. A solution can be regarded as a homogeneous mixture since the solute is uniformly distributed throughout the solution. The solute and solvent constitutes one phase.
When a salt crystal is added to the solution, crystallization is induced and large crystals of solute form.
https://brainly.com/question/9970247
A salt crystal is a cubic form of sodium chloride that is closely bounded together by the reaction of sodium and chlorine ions during electrovalent bonding.
Taking a look at a heterogeneous mixture;
It refers to the mixtures that are not thoroughly mixed and uniform in composition.
On the other hand, homogeneous mixtures are formed when a substance i.e. solute (here, it is the salt crystal) is being added to a cool liquid(solvent) is thoroughly mixed.
From the given information, we are being told that when this single salt crystal is added to the cool liquid, large crystals are formed.
This implies that the formation of large crystals is brought about by the action of crystaliization rendering the liquid to be a homogeneous mixture.
We can therefore conclude that the correct statement about the original cool liquid is in Option D.
Learn more about Solution here:
https://brainly.com/question/1616939?referrer=searchResults
Which best describes the importance of the microscope to the development of the cell theory?
Answer:
The answer is "all the cells are too small, which is not seen by the naked eye, that's why we use a microscope to see it".
Explanation:
In the given question the choices were missing so, we define the correct answer only.
Cells are the essential building blocks of all living entities. There will be trillions of cells within the body. They construct a body shape, absorb nutrients, transform them into energy, and conduct specialized features.
It provides stability and guidance, encourages mitotic cell development, encourages active and passive transfer, generates energy, induces metabolic processes, and contraceptive support.
calculate the pH of 500cm3 of 0.2mol/dm3 Ca(OH2), assume complete ionisation
Answer:
The pH of 500 cm³, 0.2 mol/dm³, Ca(OH₂) is ≈ 13.6
Explanation:
The given parameters are;
Concentration of the calcium hydroxide, Ca(OH₂) = 0.2 mol/dm³
Volume of the calcium hydroxide, Ca(OH₂) = 500 cm³
Given that the calcium hydroxide, Ca(OH₂), undergoes complete ionization in water, complete dissociation, we have;
Ca(OH₂) ⇄ Ca²⁺ + 2 OH⁻
Therefore, we have;
2 moles of [OH⁻] for each mole of Ca(OH₂) which gives the concentration of [OH⁻] as
[OH⁻] = 2 × 0.2 ≈ 0.4 mol/dm³
The pH is given by the formula
pH = 14 + ㏒₁₀ [OH⁻]
pH = 14 + ㏒₁₀ (0.4) = 14 - 0.3979 = 13.6021 ≈ 13.6
The pH of the 500 cm³ 0.2 mol/dm³ Ca(OH₂) ≈ 13.6.