A mixture of gases includes helium, neon, argon and krypton. The partial pressures are as follows:
Partial pressure, mm Hg
He 152
Ne 164
Ar 126
Kr 169
What is the total pressure of the mixture after removing the argon component? Report your answer rounded
to the nearest mm Hg but without units

Answer:

I think third C12/hv is right answer

Answer:

Anaphase

Explanation:

The centromere splits during the anaphase of the cell division. Thus, allowing the two linked chromatids to separate.

A typical chromosome is made up of two sister chromatids joined together by a structure known as the centromere. During cell division - at the metaphase stage - the chromosomes align at the equator of the cell, forming the metaphase plate. The spindle from the opposing ends of the cell engages each chromosome at the kinetochore of the centromere.

At the anaphase stage, the centromere splits, leading to the separation of the sister chromatids of each chromosome. The sister chromatids of the same then start migrating in the opposite direction as a result of the shortening of the spindle fiber.

Answer:

the answer is glu and I know

The residue that has been drawn incorrectly is option (B) i.e. glu .

Glutathione consists of a glutamate residue linked to cysteine via its γ-carboxyl rather than the α-carboxyl group and followed by a conventional peptide bond between cysteine and glycine.

It plays an important role in maintaining the proper ratio of oxidized to reduced forms of metabolically important thiols such as coenzyme A.

It also provides reducing equivalents that detoxify reactive oxygen species such as peroxides.

The tripeptide is  regenerated through the concerted action enzymes in the so-called γ-glutamyl cycle.

The residue that has been drawn incorrectly is glutamate residue ,hence option (B) is correct.

Learn more about glutamate residue ,here:

https://brainly.com/question/13873550

#SPJ2

Answer:

option c see image... and yw

The molecule shown in option C is butane.

To learn more about butane,

https://brainly.com/question/14818671

#SPJ2

The correct answer is 3 liters

Explanation:

If a substance has a solubility of [tex]12 \frac{grams}{liter}[/tex], this means in 1 liter, the grams that can be dissolved are 12 grams. Now, considering Justin and Ellie need to dissolve 36 grams to calculate the number of liters just divide the total of grams into 12 as each liter dissolves only 12 grams. The process is shown below:

36 grams (the amount that will be dissolved) ÷ 12 (grames dissolved per liter) = 3 liters (liters to dissolved 36 grams)

Answer:

It would be 3 liters

Explanation:

Answer:

E) NaF and SrO

Explanation:

The ionic bonding occurs between atoms with a great difference in electronegativity. This usually happens between a metal and a non-metal.

In which pair do both compounds exhibit predominantly ionic bonding?

A) KCl and CO₂. NO. C and O are non-metals and present covalent bonding.

B) SO₂ and BaF₂. NO. S and O are non-metals and present covalent bonding.

C) F₂ and N₂O. NO. Both compounds contain non-metals and present covalent bonding.

D) N₂O₃ and Rb₂O. NO. N and O are non-metals and present covalent bonding.

E) NaF and SrO. YES. Na and Sr are metals while F and O are non-metals.

Answer:

I don't know What can I do.

Answer:

B. 4.52 X10-9 M

Explanation:

Our goal for this question is to calculate the concentration of hydronium ions [tex]H^+[/tex] produced by water in a vessel with a concentration of hydroxide ions of [tex]2.21X10^-^6~M[/tex]. So, our first approach can be the ionization reaction of water:

[tex]H_2O_(_l_)~->~H^+~_(_a_q_)~+~OH^-~_(_a_q_)[/tex]

If we write the Keq expression for this reaction we will have:

[tex]Keq=[H^+][OH^-][/tex]

Now, water is the universal solvent, so, Keq has a special name. In the equilibrium problems for water we have to use "Kw" instead of "Keq":

[tex]Kw=[H^+][OH^-][/tex]

From this equation, we know the Kw value () and the concentration of the hydroxide ions ([2.21X10^-^6~M]). If we replace these values into the equation we can solve for [tex][H^+][/tex]:

[tex]1.0X10^-^1^4=[H^+][2.21X10^-^6~M][/tex]

[tex][H^+]=\frac{1.0X10^-^1^4}{2.21X10^-^6}=4.52X^-^9[/tex]

I hope it helps!

Answer:

B. 4.52 * 10^-9M

Explanation:

did the test

Answer:

Chromosome condensation, the landmark event at the onset of prophase, often begins in isolated patches of chromatin at the nuclear periphery. Later, chromosome condense into two threads termed sister chromatids that are closely paired along their entire lengths.

Explanation:

hope dis help & may I have brainly plz

Answer:

Entropy change of ice changing to water at 0°C is equal to 57.1 J/K

Explanation:

When a substance undergoes a phase change, it occurs at constant temperature.

The entropy change Δs, is given by the formula below;

Δs = q/T

where q is the quantity of heat absorbed or evolved in Joules and T is temperature in Kelvin at which the phase change occur

From the given data, T = 0°C = 273.15 K, q = 15.6 KJ = 15600 J

Δs = 15600 J / 273.15 K

Δs = 57.111 J/K

Therefore, entropy change of ice changing to water at 0°C is equal to 57.1 J/K

The entropy change of ice changing to water will be "57.1 J/K".

The shift in what seems like a thermodynamic system's condition of confusion is caused by the transformation of heat as well as enthalpy towards activity. Entropy seems to be greater mostly in a network with a high quantity or measure of chaos.

According to the question,

Temperature, T = 0°C or,

                          = 273.15 K

Heat, q = 15.6 KJ or,

            = 15600 J

We know the formula,

Entropy change, Δs = [tex]\frac{q}{T}[/tex]

By substituting the values, we get

                                 = [tex]\frac{15600}{273.15}[/tex]

                                 = 57.11 J/K

Thus the above answer is correct.    

Find out more information about Entropy change here:

https://brainly.com/question/6364271

Answer:

Al(OH)₃ +  OH⁻  →  Al(OH)₄⁻

The compound is called hydroxoaluminate.

Explanation:

Aluminiun Hydroxide → Al(OH)₃

NaOH → Sodium hydroxide.

The Al(OH)₃ is an amphoteric compound, while the NaOH is a strong base. When they react, we may think that, fist of all, the base can dissociate: NaOH  →  Na⁺  +  OH⁻

So the Al(OH)₃ will be a Lewis acid, as it can donate a pair of e⁻

Al(OH)₃ +  OH⁻  →  Al(OH)₄⁻

Answer:

6.93

Explanation:

Step 1: Given data

Step 2: Convert the temperature to the Kelvin scale

We will use the following expression.

K = °C + 273.15

K = 50°C + 273.15

K = 323 K

Step 3: Calculate K

We will use the following expression.

∆G° = -R × T × ln K

-5.20 × 10³ J = -(8.314 J/mol.K) × 323 K × ln K

K = 6.93

Answer:

The answer is

Explanation:

The Ka of an acid when given the pH and concentration can be found by

where

c is the concentration of the acid

From the question

pH = 5.82

c = 0.010 M

Substitute the values into the above formula and solve for Ka

We have

Multiply through by - 2

Find antilog of both sides

We have the final answer as

Hope this helps you

Answer:

3.72

Explanation:

First you need the volume.

Final level =             43.3

Initial level =            25.0

Change in volume =18.3

So the density = mass / volume

mass = 68.1

vol     = 18.3

density = 68.1 / 18.3

density = 3.72

Answer:

[tex]\boxed {\boxed {\sf 3.72 \ g/mL}}[/tex]

Explanation:

We are asked to find the density of a small object. Density is calculated using the following formula.

[tex]\rho= \frac{m}{v}[/tex]

The mass of the object is 68.1 grams.

The volume was found using water displacement. A known quantity of water was measured out (25.0 mL), then the object was added. The new water level was recorded (43.3 mL). The volume is the difference between the two water levels.

Now we know the mass and the volume, so we can substitute the values into the formula.

[tex]\rho= \frac{ 68.1 \ g }{18.3 \ mL}[/tex]

[tex]\rho = 3.721311475 \ g/mL[/tex]

The original measurements of mass and water levels have 3 significant figures, so our answer must have the same. For the number we found, that is the hundredth place. The 1 in the thousandth place tells us to leave the 2 in the hundredth place.

[tex]\rho \approx 3.72 \ g/mL[/tex]

The density of the small object is approximately 3.72 grams per milliliter.

Answer:

CO2

Molar mass: 44.01 g/mol

Explanation:

CO2

Answer:

[tex]m_{CaCO_3}=0.179gCaCO_3[/tex]

Explanation:

Hello,

In this case, since the undergoing chemical reaction is:

[tex]CaCO_3(s)\rightarrow CaO(s)+CO_2(g)[/tex]

The corresponding moles of carbon dioxide occupying 40.0 mL (0.0400 L) are computed by using the ideal gas equation at 273.15 K and 1.00 atm (STP) as follows:

[tex]PV=nRT\\\\n=\frac{PV}{RT}=\frac{1.00 atm*0.0400L}{0.082\frac{atm*L}{mol*K}*273.15 K})=1.79x10^{-3} mol CO_2[/tex]

Then, since the mole ratio between carbon dioxide and calcium carbonate is 1:1 and the molar mass of the reactant is 100 g/mol, the mass that yields such volume turns out:

[tex]m_{CaCO_3}=1.79x10^{-3}molCO_2*\frac{1molCaCO_3}{1molCO_2} *\frac{100g CaCO_3}{1molCaCO_3}\\ \\m_{CaCO_3}=0.179gCaCO_3[/tex]

Regards.

The mass of CaCO₃ required to produce 40.0 mL of CO₂ at STP is 0.179 g

From the question,

We are to determine the mass of CaCO₃ required to produce 40.0 mL of CO₂ at STP.

First, we will determine the number of mole of CO₂ required to be produced

From the formula

PV = nRT

Where

P is the pressure

V is the volume

n is the number of moles

R is the ideal gas constant

and T is the temperature

Then, we can write that

[tex]n = \frac{PV}{RT}[/tex]

From the question,

V = 40.0 mL = 0.04 L

At STP

P = 1 atm

T = 273.15 K

and

R = 0.08206 L atm mol⁻¹ K⁻¹

Putting the parameters into the formula, we get

[tex]n = \frac{1 \times 0.04}{0.08206 \times 273.15}[/tex]

∴ n = 0.0017845 mole

Now, we will write the balanced chemical equation for the decomposition of CaCO₃

CaCO₃ → CaO + CO₂

This means,

1 mole of CaCO₃ will decompose to produce 1 mole of CO₂

Since 0.0017845 mole of CO₂ is to be produced,

Then,

0.0017845 mole of CaCO₃ would be required

Now, for the mass of CaCO₃ required,

Using the formula

Mass = Number of moles × Molar mass

Molar mass of CaCO₃ = 100.0869 g/mol

∴ Mass of CaCO₃ required = 0.0017845 × 100.0869

Mass of CaCO₃ required = 0.178605 g

Mass of CaCO₃ required ≅ 0.179 g

Hence, the mass of CaCO₃ required to produce 40.0 mL of CO₂ at STP is 0.179 g

Learn more here: https://brainly.com/question/17169574

Answer:

The answer is a.

Explanation:

Most of the costs associated with using renewable resources are due to overuse of the resources.

Most of the costs associated with using renewable resources are due to overuse of resources.

Renewable resources are those resources which will be generated naturally and continously from the nature and these are also inexhaustible means non ended.

As from the definition it is clear that we can reuse or will use again and again these types of resources, that's why cost associated with these renewable resources are high.

Hence, overuse of resouces is one of the reason.

To know more about renewable resorces, visit the below link:
https://brainly.com/question/79953

Answer:

The air smelled like a compound of diesel and gasoline fumes.

Answer:

AgCl (silver Chloride) is being precipitated out as white and cloudy crystals.

Explanation:

If a student mixes 1.0 mL of aqueous silver nitrate AgNO3 (aq)  with 1.0 mL of aqueous sodium chloride, NaCl (aq), in a clean test tube.

The sodium chloride is being acidified with dilute trioxonitrate (V) acid. Then a few drops of  silver trioxonitrate(V) is added afterwards. A  white precipitate of silver chloride, which dissolves readily in aqueous ammonia indicates the presence of sodium chloride.

The reaction proceeds as follows:

[tex]\mathtt{AgNO_{3(aq)} + NaCl _{(aq)} \to AgCl _{(s)} + NaNO_3_{(aq)}}[/tex]

From the reaction between AgNO3 (aq) and NaCl (aq), AgCl (silver Chloride) is being precipitated out as white and cloudy crystals.

Answer:

C. water acts as a radiation shield to reduce the radiation level

Answer:

NO3 has 3 atoms of oxygen in it per molecule (indicated by the subscript of 3) and (NO3)2 means you have 2 NO3 molecules, meaning you double the subscript to get 6 oxygen atoms

Answer:

When balancing redox reactions under basic conditions in aqueous solution, the first step is to balance oxygen.

Explanation:

Oxidation-reduction reactions or redox reactions are those in which an electron transfer occurs between the reagents. An electron transfer implies that there is a change in the number of oxidation between the reagents and the products.

The gain of electrons is called reduction and the loss of electrons oxidation. That is to say, there is oxidation whenever an atom or group of atoms loses electrons (or increases its positive charges) and in the reduction an atom or group of atoms gains electrons, increasing its negative charges or decreasing the positive ones.

The oxidation and reduction half-reactions, in a basic medium, adjust the oxygens and hydrogens as follows:

In the member of the half-reaction that presents excess oxygen, you add as many water molecules as there are too many oxygen. Then, in the opposite member, the necessary hydroxyl ions are added to fully adjust the half-reaction. Normally, twice as many hydroxyl ions, OH-, are required as water molecules have previously been added.

In short, you first adjust the oxygens with OH-, then you adjust the H with H₂O, and finally you adjust the charge with e-

So, when balancing redox reactions under basic conditions in aqueous solution, the first step is to balance oxygen.

Answer:

c. balance the reaction as though under acidic conditions

Explanation:

When balancing redox reactions under basic conditions, a good technique is to first balance the reaction as though under acidic conditions. We then adjust the result to reflect the basic conditions.

Answer:

For the mentioned reaction, the balanced chemical equation is:  

KBr (aq) + AgNO3 (s) ⇒ KNO3 (aq) + AgBr (s)

The number written in front of the ion, atoms, and molecules in a chemical reaction so that each of the elements on both the sides of reactants and products of the equation gets balanced is known as the stoichiometric coefficient.  

From the mentioned balanced equation, the stoichiometric coefficient before KBr is 1, AgNO3 is 1, KNO3 is 1, as well as before AgBr is also 1. Thus, it is clear that 1 mole of potassium bromide reacts with 1 mole of silver nitrate to produce 1 mole of potassium nitrate and 1 mole of silver bromide.  

The element which can not loose electron easily and having electronagtive character is called non-metal it has following property-

1. it can not conduct heat and electricity

2. it is netiher ductile not malleable

3. it is not lsuturous and also not sonorous

Explanation:

a nonmetal (or non-metal) is a chemical element that mostly lacks the characteristics of a metal. Physically, a nonmetal tends to have a relatively low melting point, boiling point, and density. A nonmetal is typically brittle when solid and usually has poor thermal conductivity and electrical conductivity. Chemically, nonmetals tend to have relatively high ionization energy, electron affinity, and electronegativity. They gain or share electrons when they react with other elements and chemical compounds. Seventeen elements are generally classified as nonmetals: most are gases (hydrogen, helium, nitrogen, oxygen, fluorine, neon, chlorine, argon, krypton, xenon and radon); one is a liquid (bromine); and a few are solids (carbon, phosphorus, sulfur, selenium, and iodine). Metalloids such as boron, silicon, and germanium are sometimes counted as nonmetals.

Answer:

7.4 × 10⁻⁹ M

Explanation:

Step 1: Given data

Solubility product constant (Ksp) for Li₃PO₄: 5.9 × 10⁻¹⁷

Concentration of lithium ion: 0.0020 M

Step 2: Write the reaction for the solution of Li₃PO₄

Li₃PO₄(s) ⇄ 3 Li⁺(aq) + PO₄³⁻(aq)

Step 3: Calculate the phosphate concentration required for a precipitate to occur

The solubility product constant is:

Ksp = 5.9 × 10⁻¹⁷ = [Li⁺]³ × [PO₄³⁻]

[PO₄³⁻] = 5.9 × 10⁻¹⁷ / [Li⁺]³

[PO₄³⁻] = 5.9 × 10⁻¹⁷ / 0.0020³

[PO₄³⁻] = 7.4 × 10⁻⁹ M

Answer:

4.22

Explanation:

We know from the question, that the pOH of the solution is 9.78. Now the pOH is defined as -log [OH^-].

If the pOH of a solution is given, one may obtain the pH of such solution from the formula;

pH + pOH =14

Hence we can write;

pH = 14-pOH

pH = 14 - 9.78 = 4.22

Hence the pH of the solution is 4.22.

Answer: A. [tex]H_{2}_{(g)}+I_{2}_{(g)}=>2HI_{(g)}[/tex] and D.[tex]C_{(s)}+O_{2}_{(g)}=>CO_{2}_{(g)}[/tex]

Explanation: The relationship between internal energy change and enthalpy change during a chemical reaction occurs according to the following formula:

[tex]\Delta H=\Delta E+\Delta(PV)[/tex]

So, for changes in enthalpy and internal energy to be equal volume or pressure has to be constant, i.e., zero.

Change in the number of moles of gas during the reaction can make the difference between [tex]\Delta H[/tex] and [tex]\Delta E[/tex] be larger, so for them to be equal and pressure constant, number of moles must be the same in reagents and products.

Analysing each reaction above:

Reaction A has the same number of moles in reagents and products, so  enthalpy change and internal energy change will be equal;

Reactions B and C don't have the same number of moles at both sides, so enthalpy and energy will be different.

Reaction D, although reagent side have 2 compounds, carbon is solid, so reaction have the same number of moles in both sides. Enthalpy and Energy will be equal.

Answer:

TATGGCGTT

Explanation:

Complimentary base pairs:

A-T

C-G

Use the other letter for complimentary strands