Calculate ΔS∘rxn for the balanced chemical equation 2H2S(g)+3O2(g)→2H2O(g)+2SO2(g) Express the entropy change to four significant figures and include the appropriate units.

Answer:

[tex]r_A=-1\frac{M}{s}[/tex]

Explanation:

Hello,

In this case, given the rate of production of C, we can compute the rate of consumption of A by using the rate relationships which include the stoichiometric coefficients at the denominators (-1 for A and 2 for C) as follows:

[tex]\frac{1}{-1} r_A=\frac{1}{2}r_C[/tex]

In such a way, solving the rate of consumption of A, we obtain:

[tex]r_A=-\frac{1}{2} r_C=-\frac{1}{2}*2\frac{M}{s}\\ \\r_A=-1\frac{M}{s}[/tex]

Clearly, such rate is negative which account for consumption process.

Regards.

Answer:

See explanation

Explanation:

The reaction of chlorine with the pictured compound will occur via free radical mechanism. The stability of the free radical formed will depend on its structure.

The order of stability of free radicals is methyl < primary < secondary < tertiary. Hence a tertiary carbon free radical is the most stable.

Looking at the compound, the radical will form at the position shown in the image attached since it will lead to a secondary free radical which is more stable.

The structure that should be drawn is shown below.

It should be within the pictured compound that will arise via a free radical mechanism. The stability should be based on the structure. The stability of the order of free radicals should be methyl < primary < secondary < tertiary. Thus, a tertiary carbon free radical should be most stable.

Here look at the compound, the radical should form at the position that should be shown in the image that resulted in the secondary free radical i.e. more stable.

Answer:

Explan ionization energy, atomic radius, and electron affinityation:

This question most likely has answer choices. The possible answer choices are as followed:

The answers are Ionic radii tend to increase down a group, Cationic radii tend to decrease across a period, and Ionic radii increase when switching from cations to anions in a period (1st, 4th, and 5th options).

Answer:

Bronsted lowry base = Proton acceptor = H2O

Bronsted lowry acid = Proton donor = HF-

Explanation:

The equation is given as;

HF-(aq) + H2O(l) --> F-(aq) + H3O(aq)

A bronsted lowry base is any specie that can accept hydrogen ion (proton) from another molecule.

Basically a bronsted lowry base is  a proton acceptor while a bronsted lowry acid is a proton donor.

In the reaction above, upon comparing both the reactants and products;

Bronsted lowry base = Proton acceptor = H2O

Bronsted lowry acid = Proton donor = HF-

Answer:

Mole = molecular weight / molecular mass

Mole = 16/16

Mole= 1

Answer:

a. is released in the process

Explanation:

In fusion reaction the nucleus is unstable so it releases its binding energy resulting in decreasing its mass so it becomes more stable.

Both sides of the equation must be multiplied by 1/cd to give the following equation: b = a/cd

a x 1/cd = bcd x 1/cd

a/cd = b

Therefore, b = a/cd

Learn more: https://brainly.com/question/21866313

The predominant consequence to an individual who is genetically deficient in liver fructose 1,6-bisphosphatase would be failure to resynthesize glucose from lactic acid.​

WHAT IS FRUCTOSE 1,6-BISPHOSPHATASE:

CONSEQUENCES OF DEFICIENCY OF FRUCTOSE 1,6-BISPHOSPHATASE:

Therefore, the predominant consequence to an individual who is genetically deficient in liver fructose 1,6-bisphosphatase would be failure to resynthesize glucose from lactic acid.​

Learn more at: https://brainly.com/question/13717824

Answer:

As hydrogen is more electronegative than boron, in BH3 the oxidation number of hydrogen should be taken as -1. (E. N. of B = 2.0 & E. N. of H = 2.1)

Suppose, oxidation number of B is x.

So, we can write, x + 3*(-1) = 0

=> x = +3

Therefore, oxidation num

Explanation:

As hydrogen is more electronegative than boron, in BH3 the oxidation number of hydrogen should be taken as -1. (E. N. of B = 2.0 & E. N. of H = 2.1)

Suppose, oxidation number of B is x.

So, we can write, x + 3*(-1) = 0

=> x = +3

Therefore, oxidation num

Answer:

Ka = 6.15x10⁻⁷

Explanation:

Ka is defined as dissociation constant in the equilibrium of a weak acid with water. The general reaction is:

HA(aq) + H₂O(l) ⇆ H₃O⁺(aq) + A⁻(aq)

And Ka is defined as the ratio between molar concentrations in equilibrium of products over reactants as follows:

Ka = [H₃O⁺] [A⁻] / [HA]

You don't take water in the equilibrium beacuse is a pure liquid

Replacing with the concentrations of the problem:

Ka = [H₃O⁺] [A⁻] / [HA]

Ka = [4.00x10⁻⁴] [4.00x10⁻⁴] / [0.260]

Answer:

Sorry I don't know what you

According to law of conservation of mass as mass is neither created nor destroyed mass of compound should be reported as 1.86 g that is by subtracting mass of compound from mass of compound and container.

According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .

Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.

Law needs to be modified in accordance with laws of quantum mechanics under the principle of mass and energy equivalence.This law was proposed by Antoine Lavoisier in the year 1789.

Learn more about law of conservation of mass,here:

https://brainly.com/question/13383562

#SPJ2

Answer:

acetic acid and phosphoric acid

Explanation:

After refluxing the reaction mixture ( synthesis of isoamyl acetate ) what is likely present in the solution is acetic acid and phosphoric acid, this due to the fact that if the reaction time between the reactants was less than the refluxing time which is 25 minutes,

there will be no reactant ( 3-methylbutanol )left in the reaction mixture

Answer:

Kb = [CH₃NH₃⁺] × [OH⁻] / [CH₃NH₂]

Explanation:

According to Brönsted-Lowry acid-base theory:

When methylamine reacts with water, it behaves as a Brönsted-Lowry base, according to the following reaction.

CH₃NH₂(aq) + H₂O(l) ⇄ CH₃NH₃⁺(aq) + OH⁻(aq)

The basic equilibrium constant (Kb) is:

Kb = [CH₃NH₃⁺] × [OH⁻] / [CH₃NH₂]

Answer:

a. Sodium cyclopentanecarboxylate

b. No reaction

Explanation:

In this case, in the cyclopentanecarboxylic acid we have a carboxylic acid functional group. Therefore we have an "acid". The acids by definition have the ability to produce hydronium ions ([tex]H^+[/tex]).

With this in mind, for molecule a. we will have an acid-base reaction, because NaOH is a base. When we put together an acid and a base we will have as products a salt and water. In this case, the products are  Sodium cyclopentanecarboxylate (the salt) and water.

For the second molecule, we have the hydronium ion  ([tex]H^+[/tex]). This ion can not react with an acid. Because, the acid will produce the hydronium ion also, so a reaction between these compounds is not possible.

See figure 1

I hope it helps!

Answer:

Toxins

Explanation:

H2CO3 is an acid because it gave away a proton to become HNO3~.

HNO3~ is a conjugate Base because Acids become conjugate Bases after giving away a proton.

C5H5N is a base because it accepted the proton from H2CO3 to become HC5H5N+.

HC5H5N+ is a conjugate Acid because Bases become Conjugate Acids after accepting a proton.

Answer:

When equation for neutralization of HBr by Ca(OH)₂ is correctly balanced, 1.2046*10²⁴ molecules of water will be formed

Explanation:

A neutralization reaction is one in which an acid (or acidic oxide) reacts with a base (or basic oxide). In the reaction a salt is formed and in most cases water is formed. A Salt is an ionic compound formed by the union of ions and cations through ionic bonds.

In the reactions of a strong acid (those substances that completely dissociate) with a strong base (they dissociate completely, giving up all their OH-), the complete neutralization of the species is carried out:

2 HBr (aq) + Ca(OH)₂ (s) → CaBr₂ (aq) + 2 H₂O (l)

The reaction is already balanced, complying with the law of conservation of matter. This law states that since no atom can be created or destroyed in a chemical reaction, the number of atoms that are present in the reactants must be equal to the number of atoms present in the products.

By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), 2 moles of water H₂O are formed.

On the other hand, Avogadro's Number or Avogadro's Constant is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole of said substance. Its value is 6.023 * 10²³ particles per mole. Avogadro's number applies to any substance.

Then you can apply the following rule of three: if 1 mole of H₂O contains 6.023*10²³ molecules, 2 moles of H₂O, how many molecules does it contain?

[tex]amount of molecules=\frac{2moles*6.023*10^{23}molecules }{1 mole}[/tex]

amount of molecules= 1.2046*10²⁴ molecules

When equation for neutralization of HBr by Ca(OH)₂ is correctly balanced, 1.2046*10²⁴ molecules of water will be formed

Answer:

[tex]Ksp=1.07x10^{-8}[/tex]

Explanation:

Hello,

In this case, the dissociation reaction is:

[tex]PbI_2(s)\rightleftharpoons Pb^{2+}(aq)+2I^-(aq)[/tex]

For which the equilibrium expression is:

[tex]Ksp=[Pb^{2+}][I^-]^2[/tex]

Thus, since the saturated solution is 0.064g/100 mL at 20 °C we need to compute the molar solubility by using its molar mass (461.2 g/mol)

[tex]Molar solubility=\frac{0.064g}{100mL}*\frac{1000mL}{1L}*\frac{1mol}{461.2g}=1.39x10^{-3}M[/tex]

In such a way, since the mole ratio between lead (II) iodide to lead (II) and iodide ions is 1:1 and 1:2 respectively, the concentration of each ion turns out:

[tex][Pb^{2+}]=1.39x10^{-3}M[/tex]

[tex][I^-]=1.39x10^{-3}M*2=2.78x10^{-3}M[/tex]

Thereby, the solubility product results:

[tex]Ksp=(1.39x10^{-3}M)(2.78x10^{-3}M)^2\\\\Ksp=1.07x10^{-8}[/tex]

Regards.

Solubility product constant for the product of lead(II) iodide is [tex]\bold { 1.07x 10^-^8}[/tex].

The dissociation reaction for lead (II) iodide

[tex]\bold {Pb I^2 (s) \leftrightharpoons Pb^2^+ + 2I^- }[/tex]

Solubility product constant at equilibrium.

[tex]\bold {Ksp = [Pb^2^++[I^-]^2}[/tex]

The molar solubility of the substance can be calculated by using the molar mass,

[tex]\bold {s = \dfrac {0.064}{100 mL} \times 461.2 g/mol = 1.39x10^-^3}[/tex]

Molar ratio between between PbI to lead and iodide ions is 1:1 and 1:2 respectively.

Thus Ksp will be,

[tex]\bold {Ksp =(1.39x10^-^3)(2.78x10^-^3 )^2}\\\\\bold {Ksp = 1.07x 10^-^8}[/tex]

Therefore, solubility product constant for the product of lead(II) iodide is [tex]\bold { 1.07x 10^-^8}[/tex].

To know more about  solubility product constant,

https://brainly.com/question/1419865

Answer:

[tex]C_{C_4H_6}=0.179M[/tex]

Explanation:

Hello,

In this case, the undergoing chemical reaction is:

[tex]2C_4H_6\rightarrow C_8H_{12}[/tex]

And the rate law is:

[tex]\frac{dC_{C_4H_6}}{dt}=kC_{C_4H_6}^2[/tex]

Which integrated is:

[tex]\frac{1}{C_{C_4H_6}} =\frac{1}{C_{C_4H_6}^0}+kt[/tex]

In such a way, the concentration after 10.0 min is:

[tex]\frac{1}{C_{C_4H_6}} =\frac{1}{0.200M}}+5.76x10^{-2}\frac{L}{mol*min}*10.0min\\ \\\frac{1}{C_{C_4H_6}}=5.58\frac{L}{mol} \\\\C_{C_4H_6}=\frac{1}{5.58\frac{L}{mol} } \\\\C_{C_4H_6}=0.179M[/tex]

Regards.

The wavelength of the color cyan is 508 nm.

To solve the problem, we use the following equation that relates the frequency (ν) and the wavelength (λ) of a wave:

c = λ x ν

Given:

c = speed of light = 3.00 x 10⁸ m/s (is a constant)

ν = 5.902 x 10¹⁴ Hz = 5.902 s⁻¹

We introduce the data to calculate the wavelength in m:

λ = c/ν = (3.00 x 10⁸ m/s)/(5.902 s⁻¹) = 5.08 x 10⁻⁷ m

We know that 10⁻⁹m = 1 nm, so we convert λ to nm:

λ = 5.08 x 10⁻⁷ m x 1 nm/10⁻⁹m = 508 nm

To learn more about the relationship between frequency and wavelength in a wave, you can visit: https://brainly.com/question/4386945

Answer:

0.032 moles

Explanation:

no of moles =

[tex] \frac{mass \: in \: grams}{relative \: molecular \: mass} [/tex]

=

[tex] \frac{2.4}{40 + 32 + 2} [/tex]

= 0.032

Calcium hydroxide reacted with nitric acid the total number of moles will be 0.032 moles.

A mole is Avogadro's number of particles, which is exactly 6.02214076×1023.

The mole is widely used in chemistry as a convenient way to express amounts of reactants and products of chemical reactions. For example, the chemical equation 2H2 + O2 → 2H2O can be interpreted to mean that for each 2 mol dihydrogen (H2) and 1 mol dioxygen (O2) that react 2 mol of water (H2O) form.

Number of moles = Mass of substance / Mass of one mole Number of moles

mass of substance = 2.4g

molar mass of calcium hydroxide is  (1 ×40.078g/mol Ca) +(2 × 15.999g/mol O) + (2 × 1.008g/mol H) = 74.092 g/mol Ca (OH)2

substituting the value,

number of moles = 2.4 / 74.029

                          = 0.032 moles

Therefore, moles of calcium hydroxide will be 0.032 moles

Learn more about moles, here :

https://brainly.com/question/15209553

#SPJ2

Explanation:

After combining hydrogen ions and hydroxide ions combine to form water molecules, the next step is the  last step when balancing a redox reaction under basic condition.

The last step is to cancel all common terms that arises as a result of the formation of the water molecule. Usually, there's need to balance the water molecules in the reactant and product side of the reaction.

Answer:

a. In the nickel-aluminum galvanic cell, the cathode is nickel electrode.

b. Therefore electrons flow from the aluminium electrode to the nickel electrode.

c. The aluminium electrode loses mass, while the nickel electrode electrode gains mass.

Explanation:

Voltaic or galvanic cells are electrochemical cells in which spontaneous oxidation-reduction reactions. The two halves of the redox reaction are separate and electron transfer is required to occur through an external circuit for the redox reaction to take place. That is, one of the metals in one of the half cells is oxidized while the metal of the other half cell is reduced, producing an exchange of electrons through an external circuit. This makes it possible to take advantage of the electric current.

Given:

E ⁰N i ⁺² = − 0.23 V   is the standard reduction potential for the nickel ion

E ⁰  A l ⁺³ =  − 1.66  V  is the standard reduction potential for the aluminum ion

The most negative potentials  correspond to more reducing substances. In this case, the aluminum ion is the reducing agent, where oxidation takes place. In the anodic half cell oxidations occur, while in the cathode half cell reductions occur. So the aluminum cell acts as the anode while the nickel cell acts as the cathode.

So a. In the nickel-aluminum galvanic cell, the cathode is nickel electrode.

The metal that is oxidized gives electrons to the metal that is reduced through the outer conductor. Then the electrons flow spontaneously from the anode to the cathode.

Then b. Therefore electrons flow from the aluminium electrode to the nickel electrode.

Ni⁺², being the cathode, accepts electrons, becoming Ni (s) and depositing on the Ni electrodes.

So, c. The aluminium electrode loses mass, while the nickel electrode electrode gains mass.

Answer:

B. The atom

Explanation:

Cells are the most basic unit of structure and the smallest unit of matter is the atom.

Answer:

B. The atom

Explanation:

yeee it was right

Answer:

Bisphenol A (BPA)

Explanation:

Bisphenol A (BPA) is a chemical additive commonly found in resins and plastics, such as water bottles or food containers. It can also be found in household electronics, medical devices, dental fillings and sales receipts, just to name a few other applications.

Answer:

0.16 M

Explanation:

Data provided as per the question is below:-

Volume of [tex]HNO_3[/tex] = 0.22 L

The Volume of NaOH = 0.18 L

Morality of NaOH = 0.2

According to the given situation, the calculation of the concentration of the [tex]HNO_3[/tex] is shown below:-

For equivalence,

Number of the equivalent of [tex]HNO_3[/tex] = Number of equivalents of NaOH

[tex]= \frac{0.18\times0.2}{0.22}[/tex]

[tex]= \frac{0.036}{0.22}[/tex]

= 0.16363 M

or

= 0.16 M

Answer:

1. the siren has a lower pitch to Jane

2. the siren has a higher pitch to John

3. sound different due to moving away from Jane making the sound wave lengths longer and moving toward John making the wave lengths shorter

Explanation:

The Doppler effect expresses that sound is comparative with the spectator or observer. This is demonstrated valid by the model given with Jane and John. To one individual it could sound low and to someone else it could sound high, in light of where they are tuning in from. To John, the police alarm playing is a higher pitch. Be that as it may, to Jane this equivalent alarm is a totally extraordinary pitch and is heard lower than in comparison to the john.

This is a prime case of the Doppler Effect. They sound distinctive on the grounds that the sound is moving far from Jane making the sound frequencies longer and it is advancing toward John making the frequencies shorter. This impacts how the sound is heard by the human ear.

Answer:

13.11 g.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below :

N2 + O2 —> 2NO

Next, we shall determine the mass of O2 that reacted and the mass of NO produced from the balanced equation. This is illustrated below:

Molar mass of O2 = 16x2 = 32 g/mol

Mass of O2 from the balanced equation = 1 x 32 = 32 g.

Molar mass of NO = 14 + 16 = 30 g/mol

Mass of NO from the balanced equation = 2 x 30 = 60 g.

From the balanced equation above,

32 g of O2 reacted to produce 60 g of NO.

Finally, we shall determine the theoretical yield of NO as follow:

From the balanced equation above,

32 g of O2 reacted to produce 60 g of NO.

Therefore, 6.99 g of O2 will react to produce = (6.99 x 60)/32 = 13.11 g of NO.

Therefore, the theoretical yield of nitrogen monoxide, NO is 13.11 g.