Calculate the solubility of BaCrO4 in water at . You'll find data in the ALEKS Data tab. Round your answer to significant digits.

Answer:

C+O2=CO2

Explanation:

no.of atoms on reactant side= no.of atoms on product side

Answer:

I. 2.79x10⁻³

II. 0.155m

III. 6.49mL of the solution you must add from the stock solution

Explanation:

A solution of 0.90% by mass NaCl means that, in 100g of solution, you have 0.90g of NaCl. In other words, there are 0.90g of NaCl + 99.1g of water.

I. Mole fraction of NaCl is the ratio between moles of NaCl and total moles of solution.

Moles NaCl:

0.90g * (1mol / 58.44g) = 0.0154 moles NaCl

Moles water:

99.1g water * (1mol / 18.01g) = 5.50 moles water.

Total moles = 5.50 +0.0154 moles = 5.518 moles

Mole fraction NaCl: 0.0154 / 5.518 moles =

II. Molality is the ratio between moles of solute (NaCl) and kg of solvent.

There are 99.1g of water = 0.0991kg.

Molality is: 0.0154 moles / 0.0991kg

II. 100mL of a 0.01M are:

100mL = 0.100L * (0.01 mol / L) = 1x10⁻³ moles of NaCl

In 100g = 100mL (Density of 1g/mL) there are 0.0154 moles. To have 1x10⁻³ moles you need:

1x10⁻³ moles of NaCl * (100mL / 0.0154 moles) =

I. Mole fraction of NaCl is 2.79x10⁻³

II. Molarity of NaCl solution is 0.155m

III. 6.49mL of the stock solution required to prepare 100 mL of 0.01 M NaCl  solution.​

What does % by mass mean?

A solution of 0.90% by mass NaCl means that, in 100g of solution, you have 0.90g of NaCl.

Or

There is 0.90g of NaCl + 99.1g of water.

We need to find:

I. Mole fraction of NaCl:

Mole fraction can is the ratio of moles of Solute  to the total number of moles of the solutes and the solvent.

Moles of  NaCl(solute) = 0.90g * (1mol / 58.44g) = 0.0154 moles NaCl

Moles of  water(solvent) = 99.1g water * (1mol / 18.01g) = 5.50 moles water.

Total moles = 5.50 +0.0154 moles = 5.518 moles

Mole fraction of NaCl =  [tex]\frac{0.0154}{ 5.518} =2.79 * 10^{-3}[/tex]

II. Molality is a measure of the number of moles of solute(NaCl) in a solution corresponding to 1 kg or 1000 g of solvent

Since, 99.1g of water = 0.0991kg.

Molality of NaCl = [tex]\frac{0.0154 moles}{0.0991 kg}=0.155m[/tex]

III. 100mL of a 0.01M is:

100mL = 0.100L * (0.01 mol / L) = 1x10⁻³ moles of NaCl

In 100g = 100mL (Density of 1g/mL) there are 0.0154 moles. To have 1x10⁻³ moles you need:

1x10⁻³ moles of NaCl * [tex]\frac{100 mL}{0.0154 moles}[/tex] = 6.49mL of the solution you must add from the stock solution

Learn more:

https://brainly.com/question/15063496

Answer:

Ksp = 8.8x10⁻⁵

Explanation:

Full question is:

After mixing an excess PbCl2 with a fixed amount of water, it is found that the equilibrium concentration of Pb2+ is 2.8 × 10–2 M. What is Ksp for PbCl2?

When an excess of PbCl₂ is added to water, Pb²⁺ and Cl⁻ ions are produced following Ksp equilibrium:

PbCl₂(s) ⇄ Pb²⁺ + 2Cl⁻

Ksp = [Pb²⁺] [Cl⁻]²

If an excess of PbCl₂ was added, an amount of Pb²⁺ is produced (X) and twice Pb²⁺ is produced as Cl⁻ (2X):

Ksp = [X] [2X]²

Ksp = 4X³

As X is the amount of Pb²⁺ = 2.8x10⁻²M:

Ksp = 4(2.8x10⁻²)³

Answer:

-973 KJ

Explanation:

The balanced reaction equation is;

N2H4(aq) + 2Cl2(g) + 4OH^-(aq)---------> 4Cl-(aq) + 4H ^+(aq) + 4OH^-(aq) + N2(g)

Reduction potential of hydrazine = -1.16 V

Reduction potential of chlorine = 1.36 V

From;

E°cell= E°cathode - E°anode

E°cell= 1.36 - (-1.16)

E°cell= 2.52 V

∆G°=- nFE°cell

n= number of moles of electrons = 4

F= Faraday's constant = 96500 C

E°cell = 2.52 V

∆G°=- (4 × 96500 × 2.52)

∆G°= -972720 J

∆G°= -972.72 KJ

Answer:

C. 3

Explanation:

12.0 - 3 significant figures 1,2 and 0, because 0 is after decimal point.

Answer:

A triple bond have two pi bonds.

Explanation:

This is an alkaline that contains one sigma bond and two pi bonds.

Hope my answer helps.

Answer:

Two

Explanation:

Answer:

The answer is

Explanation:

Since the concentration , mass and molar mass of NaOH has been given we use the formula

To find the volume

where

C is the concentration

m is the mass

M is the molar mass

v is the volume

Making volume the subject we have

From the question

C = 1.25 M

m = 60 g

M = 40.0 g/mol

Substitute the values into the above formula and solve for the volume

We have

We have the final answer as

Hope this helps you

Answer:

[tex]6118.11\frac{in}{min}[/tex]

Explanation:

Hello,

In this case, by knowing that 1 inch equals 2.54 cm and 60 seconds equals 1 min, the resulting value results:

[tex]=259\frac{cm}{s}*\frac{1in}{2.54cm}*\frac{60s}{1min}\\ \\=6118.11\frac{in}{min}[/tex]

Best regards.

Answer:

0.875 Pounds

Explanation:

Formula  is

Just divide the mass value by 16

Chemistry is vital in forensic science (used to solve crimes). With chemistry, forensic scientists demonstrate what happened on a molecular level. Chemical analysis can reveal how long ago a person died, what weapon was used, the kind of tape or rope used to tie someone up, etc. They also analyze drugs/controlled substances taken from scenes and people to identify and sometimes quantify these materials.

Answer:

The 9-v transistor battery is a direct current source, while the power supply from the wall socket is an alternating current source.

Explanation:

A direct current (DC) is one that flows continuously without any minimum and maximum values. This is majorly obtained from generators, batteries or cells etc.

An alternating current (AC) is a type that flows in a sinusoidal manner, having minimum and maximum value with respect to its flowing frequency. An example is the one obtained from the wall electrical source , generators etc.

An alternating current is not mainly used for electrolysis because of its nature. It would cause a switch of the electrodes in every cycle. Therefore, a direct current source is used.

The 9-v transistor battery is a direct current source, while the power supply from the wall is an alternating current source.

Answer:

when an acid react with a base, salt and water is produced. It is because the nature of salt formed determines whether the solution is neutral, acidic or basic

Hope this helps :)

Answer:

0.1025 g/L

Explanation:

From the question above,

The solubility of oxygen gas in water at 25°c and 1.0 atm pressure is 0.041g/L

Henry's law states at a constant temperature the solubility of a gas is proportional to the pressure

Since the temperatures are both similar (25°c) then, the solubility of oxygen in water at 2.5 atm can be calculated as follows

= 0.041/1.0 × 2.5

= 0.041×2.5

= 0.1025 g/L

Hence the solubility of oxygen in water at 2.5 atm and 25°c is 0.1025 g/L

Answer:

B) 1

Explanation:

Lithium is a univalent element, univalent means that it has only one valence electron. If this is true, then lithium can only provide this one valence electron in a voltaic cell.

From the foregoing, each lithium atom can only provide one valence electron in the voltaic cell.

Answer:

B) 1

Explanation:

I got it in class!

Hope this Helps!! :))

Hello. This question is incomplete. The full question is:

Calculate the potential of the electrochemical cell and determine if it is spontaneous as written at 25 ∘C . Cu(s) || Cu2+(0.14 M) ‖‖ Fe2+(0.0040 M) || Fe(s) E∘Cu2+/Cu=0.339 VE∘Fe2+/Fe=−0.440 V Ecell= V Is the electrochemical cell spontaneous or not spontaneous as written at 25 ∘C ? not spontaneous spontaneous

Answer:

Ecell = -0.825v

Negative results indicate that the electrochemical cell is not spontaneous.

Explanation:

You will find the result by doing the following calculation:

Cu2 + = 0.14M

Fe2 + = 0.0040M

Eº Cu2 + / Cu = 0.339V

Eº Fe2 + / Fe = -0.440V

Electron change ............ n = 2

Cu // Cu2 + (0.14M) // Fe2 + (0.0040M) / Fe (s)

Cu + Fe2 + ----> Fe (s) + Cu2 + (aq)

You should now use the formula =

Eºcell = Eº anode - Eº cathode ------> Eº = Eº (Fe2 + / Fe) - Eº (Cu2 + / Cu)

Eº Cell = -0.440 - 0.339 = -0.779V

E cell = EºCell - (0.0591 / n) log (Cu2 + / Fe2 +)

E cell = -0.779 - (0.0591 / 2) log (0.14 / 0.0040)

Ecell = -0.825

Answer:

Mg²⁺(aq) + SO₄²⁻(aq) + 2Na⁺(aq) + 2OH⁻(aq) → Mg²⁺(aq) + 2OH⁻(s) + 2Na⁺(aq) + SO₄²⁻(aq)

Explanation:

The complete ionic equation is the chemical equation where the chemical species in the aqueous phase (aq) are written as ions.

In the reaction:

MgSO₄(aq) + 2NaOH(aq) → Mg(OH)₂(s) + Na₂SO₄(aq)

MgSO₄ dissociates in Mg²⁺ and SO₄²⁻, NaOH in Na⁺ and OH⁻, Mg(OH)₂ doesn't dissociate because is as solid and NaSO₄ dissociates in Na⁺ and SO₄²⁻ ions.

That means the complete ionic equation is:

Answer:  Chemical

Explanation:

When paper is burned, it creates a chemical change.

Answer:

Explanation:

Hey, there!!

The answer is chemical change.

When the paper is burned it changes into an ash. Which is a chemical change. { as it can't be reversed }.

Hope it helps...

Answer:

Cl2/FeCl3

Explanation:

The electrophilic chlorination of aromatic compounds proceeds in the presence of Cl2/FeCl3.

The function of the Lewis acid FeCl3 is to 'activate' the chlorine molecule towards electrophilic substitution. This occurs by the formation of a 'chlorine cation' which attacks the aromatic ring followed by deprotonation of the aromatic ring to retain the aromaticity of the compound.

Answer:

2. At pH near the pI, nearly all the molecules carry no net charge

Explanation:

The general equilibrium for a molecule with multiple ionizable groups could be:

H₃A⁺ ⇄ H₂A + H⁺ ⇄HA⁻ + H⁺⇄A²⁻ + H⁺

Where each equilibrium has its own pKa

The equilibriums in which H₂A are involved (The neutral molecule), are used to determine the isoelectrical point.

The isoelectrical point is defined as the value of pH in which the molecule has no net charge.

Thus, true option is:

Answer:

Hey!

0.8730 / 9.650 = 8.42445

Explanation:

8.42445 TO 2 s.f... (best option for rounding)

= 8.4

ANSWER = 8.4 (2 s.f)

HOPE THIS HELPS!!

Answer: the time taken for the radioactivity of a specified isotope to fall to half its original value.

Explanation:

Answer:

Half-life is the time required for a quantity to reduce to half of its initial value. The term is commonly used in nuclear physics to describe how quickly unstable atoms undergo, or how long stable atoms survive, radioactive decay.

Answer:

molecular formula is "SiF4" and compound name is "silicon tetrafluoride"

Explanation:

Answer:

0.0074 cL

7.4 x 10⁻³ cL

Explanation:

Step 1: Find conversion

1 liter (L) = 100 centiliters (cL)

Step 2: Set up dimensional analysis

[tex]0.74cL(\frac{1L}{100cL} )[/tex]

Step 3: Multiply and cancel out units

cL and cL cancel out.

We are left with L.

0.74/100 = 0.0074 cL or 7.4 x 10⁻³ cL

Answer:

the right side of the periodic table are metals while the left side are non metals (with the exception of hydrogen)

The correct answer for this question is that a statement that can be proven by observation or measurement is known as a fact. The other possible answers here simply refer to idea that different individuals can place value on, but that are not necessarily known to be true.

Answer:

≅ 50, 909 nm

Explanation:

Wavelength, λ = [tex]\frac{speed}{freq}[/tex]

Given:

speed of light = [tex]3*10^{8} m/s[/tex]

f = 5.89 × [tex]10^{14}[/tex]

∴ λ = 3×[tex]10^{8}[/tex] / 5.89 × [tex]10^{14}[/tex]

= 0.0000509 m ≅ 50, 909 nm

Let me know if you need further assistance

Answer:

$195

Explanation:

Step 1: Given data

Step 2: Calculate the total estimated cost for remodelling the interior of an apartment

We will use the following expression.

C = cC × nC + cB × nB + cH × nH

C = $13.69 × 3 + $9.53 × 2 + $135 × 1

C = $195