Answer:
Ca²⁺ and Cl⁻
Explanation:
In a chemical reaction, spectator ions are ions that are not involved in the reaction, that means are the same before and after the reaction.
In water, calcium hydroxide, Ca(OH)₂ is dissociated in Ca²⁺ and OH⁻. Also, hydrochloric acid, HCl, dissociates in H⁺ and Cl⁻. The reaction is:
Ca²⁺ + 2OH⁻ + 2H⁺ + 2Cl⁻ → 2H₂O + Ca²⁺ + 2Cl⁻
The ions that react are H⁺ and OH⁻ (Acid and base producing water)
And the ions that are not reacting, spectator ions, are:
Ca²⁺ and Cl⁻Calculate a pressure at a point that is 100 m below the surface of sea water of density 1150 kgm?
Answer:
1229.08975 kPa
Explanation:
Given that:
The depth of the water = 100 m below the surface of the water.
The density of the water = 1150 kgm
The mass of the water = depth of the water × density of the water
The mass of the water = 100 m × 1150 kgm
The mass of the water = 115000 kgf/m²
The mass of the water is the pressure of the water at a depth of 100 m below the surface of the water.
Since 1 kgf/m² = 0.00980665 kPa
Then 115000 kgm² = (115000 × 0.00980665) kPa
= 1127.76475 kPa
At standard temperature and pressure , the atmospheric pressure = 101.325 kPa.
Therefore, the pressure below the surface of sea water = 1127.76475 kPa + 101.325 kPa
= 1229.08975 kPa
Classify each of the following fatty acids as saturated, monounsaturated, or polyunsaturated. Drag the appropriate items to their respective bins.
1. myristic acid
2. oleic acid
3. linoleic acid
4. palmitic acid
A. Saturated acids
B. Monounsaturated acids
C. Polyunsaturated acids
Answer:
A. Saturated acids - 1. myristic acid, 4. palmitic acid
B. Monounsaturated acids - 2. oleic acid
C. Polyunsaturated acids - 3. linoleic acid
Explanation:
Saturated fatty acids are the fats combined together with a single bond and no double or triple bond while unsaturated fatty acids are the fats having a double or triple bond between them.
Monosaturated acids have only one double or triple bond while polyunsaturated acids have more than one double or triple bond.
So, an appropriate match of given acids are:
A. Saturated acids - Myristic acid (CH3(CH2)12COOH) and Palmitic acid (CH3(CH2)14COOH) dont have any double or triple bonds.
B. Monounsaturated acids - Oleic acid (CH3(CH2)7CH=CH(CH 2)7COOH) have only one double bond.
C. Polyunsaturated acids - Linoleic acid (HOC–7CH=CH–CH 2–CH=CH–3H) has two double bonds.
Hence, the correct answer is:
A. Saturated acids - 1. myristic acid, 4. palmitic acid
B. Monounsaturated acids - 2. oleic acid
C. Polyunsaturated acids - 3. linoleic acid
Which of the following substances (along with its corresponding salt) would be best suited for generating a buffer solution with a pH below 7?
a. CH3CO2H
b. C5H5N
c. HCl
d. None of the above
Answer:
d. None of the above
Explanation:
A buffer works when pH of the buffer is ± 1. Out of this range, the buffering capacity is very low.
Acetic acid, CH₃CO₂H, has a pKa of 4.74. That means its buffering capacity is between 3.74 and 5.74 of pH. Is not a good buffer to pH 7
Pyridine is a weak base with pKa of 5.52. Its buffering capacity is between 6.52 and 4.52. Is not a good buffer to pH 7
HCl is a strong acid. Just weak acids and bases can produce a buffer with its conjugate base. HCl can't produce a buffer.
Thus, right answer is:
d. None of the aboveAnswer:
CH3CO2H
Explanation:
A weak acid, such as acetic acid, paired with its conjugate base (here, the acetate ion) will be an ideal system for creating an acidic buffer solution with a pH below 7.
of their
(c) Ethanol is an alcoholic beverage which can be brewed
from cassava. Outline the process by which ethanol can
be prepared.
[3]
(d) Ethanol is used as a fuel.construct a balanced chemical
equation for its complete combustion.
[2]
[Total:10 Marks]
s?
Answer:
the chemical equation of ethanol as fuel is
C2H5OH(l)+3 02(g)------2CO2(g)+3H2O(g)
the preparation process of ethanol from cassava is
cassava flour---liquification---saccharification---cooling---fermentation---distillation---ethanol
State Newton second law
Sometimes the oxidation state of an analyte must be adjusted before it can be titrated.
a. True
b. False
Answer:
Explanation:
True
3. HNO3 + NaHCO3 → NaNO3 + H2O + CO2
4. AgNO3 +CaCl2 → AgCl + Ca(NO3)2
5. 3 H2(g) + N2(g) → 2 NH3(g)
6. 2 H202 → 2 H2O + O2
Write word equation and type of reaction
Answer:
hydrogen nitrate + sodium hydrochlorate- sodium nitrate+ water + co2 (acid base reaction)
silver nitrate + calcium chloride - silver chloride+ calcium nitrate ( double displacement reaction)
hydrogen + nitrogen - ammonia gas ( simple contact reaction)
hydrogen peroxide - water + oxygen ( single displacement reaction)
Hope it helps :)
105/22 • (1.251 - 0.620)=
Answer:
105/22*(1.251-0.620)
105/22*0.631
4.772*0.631
3.011132
Hope it helps
Answer:
3.0
Explanation:
First, complete the operations inside the parenthesis according to the normal rules for significant figures. Because there are subsequent calculations, keep at least one extra significant figure when possible: (4.7727) × (0.631).
The final product will be rounded to two significant figures because it can’t be more precise than the least precise number in the problem, 22. The final product is 3.0.
ASSINGMENT Propane react with oxygen gas to form Carbondioxide and water a. If 2.8 mole of propone react with excess oxygen ges. how many grams of Carbondioxide will be form?
Answer:
Propane (C3H8) reacts with Oxygen gas to form Carbon Dioxide and water.
a. If 2.8 moles of Propane reacts with excess Oxygen gas how many grams of CO2 will be formed?
b. How many grams of Oxygen gas will completely react with 3.8 moles of Propane?
c. If 25 g of C3H8 reacts with excess Oxygen, how many moles of water will be formed?
d. If 38 g of water are produced in the reaction, how many moles of CO2 were produced?
In which list are the three compounds above correctly listed in order of increasing boiling point? A) lowest b.p.... isopropanol < isobutane < acetone ...highest b.p. B) lowest b.p.... isobutane < acetone < isopropanol ...highest b.p. C) lowest b.p.... isobutane < isopropanol < acetone ...highest b.p. D) lowest b.p.... acetone < isobutane < isopropanol ...highest b.p. E) lowest b.p.... acetone < isopropanol < isobutane ...highest b.p.
Answer:
The correct answer is - option B - lowest b.p.... isobutane < acetone < isopropanol ...highest b.p.
Explanation:
Isobutane has lowest boiling point due to no hydrogen bonding and no diole to dipole interaction found in them. Isobutane only shows weak dispersion force.
Acetone has dipole dipole interaction but due to lack of Hydrogen bonding they have low boiling point than isopropanol but higher than isobutanol.
Isopropanol is the compound that has ability to form hydrogen bonding with other molecule its boiling point is maximum among all three.
Thus, the correct answer is - option B - lowest b.p.... isobutane < acetone < isopropanol ...highest b.p.
A compound is found to contain 26.94 % nitrogen and 73.06 % fluorine by weight. To answer the questions, enter the elements in the order presented above. 1. What is the empirical formula for this compound? 2. The molecular weight for this compound is 104.02 g/mol. What is the molecular formula for this compound?
Answer:
THE EMPIRICAL FORMULA OF THE COMPOUND IS NF2
THE MOLECULAR FORMULA OF THE COMPOUND IS N2F4
Explanation:
To calculate the empirical formula for the compound, we:
1. Write out the percentage weight of each elements
N = 26.94%
F = 73.06 %
2. Divide each by its atomic mass
( N= 14, F = 19)
N = 26.94 / 14 = 1.924
F = 73.06 / 19 = 3.845
3. Divide each by the smaller of the values
N = 1.924 / 1.924 = 1
F = 3.845 / 1.924 = 1,998
4. Round up to a whole number and write the empirical formula
N= 1
F = 2
So the empirical formula of the compound is N F2
To calculate the molecular formula, we:
(N F2 )n = molecular weight
( 14 + 19*2) n = 104.02
52 n = 104.02
n = 2.000
The molecular formula of the compound will be:
(N F2)2 = N2F4
In conclusion, the empirical formula of the compound is NF2 and the molecular formula of the compound is N2F4
Why are cells important to an organisms survival
Answer:
Cells are the basic structures of all living organisms. Cells provide structure for the body, take in nutrients from food and carry out important functions. ... These organelles carry out tasks such as making proteins?, processing chemicals and generating energy for the cell
Answer: I absolutely love this question! Biology is so interesting, so I always love to answer the curiosity of others regarding biology, such as that!
Cells are simply the basic structures of all organisms, that are living, of course! Cells provide structure for the body, and they also take in nutrients that your body needs from food and they carry out important functions. These organelles carry out tasks such as making proteins, processing chemicals, and generating energy for the cell. Isn’t that cool?
Hope this helped! <3
Complete and balance the molecular equation for the reaction of aqueous sodium sulfate, Na2SO4, and aqueous barium nitrate, Ba(NO3)2. Include physical states.molecular equation:Na_{2}SO_{4}(aq) + Ba(NO_{3})_{2}(aq) ->Na2SO4(aq)+Ba(NO3)2(aq)⟶Enter the balanced net ionic equation for this reaction. Include physical states.net ionic equation:
Answer:
1. The balanced molecular equation is given below:
Na2SO4(aq) + Ba(NO3)2(aq) —> BaSO4(s) + 2NaNO3(aq)
2. The net ionic equation is given below:
SO4^2-(aq) + Ba^2+(aq) —> BaSO4(s)
Explanation:
1. The balanced molecular equation
Na2SO4(aq) + Ba(NO3)2(aq) —> BaSO4(s) + NaNO3(aq)
The above equation can be balance as follow:
Na2SO4(aq) + Ba(NO3)2(aq) —> BaSO4(s) + NaNO3(aq)
There are 2 atoms of Na on the left side and 1 atom on the right side. It can be balance by putting 2 in front of NaNO3 as shown below:
Na2SO4(aq) + Ba(NO3)2(aq) —> BaSO4(s) + 2NaNO3(aq)
Now, the equation is balanced.
2. The bal net ionic equation.
This can be obtained as follow:
Na2SO4(aq) + Ba(NO3)2(aq) —>
In solution, Na2SO4 and Ba(NO3)2 will dissociate as follow:
Na2SO4(aq) —> 2Na^+(aq) + SO4^2-(aq)
Ba(NO3)2(aq) —> Ba^2+(aq) + 2NO3^-(aq)
Na2SO4(aq) + Ba(NO3)2(aq) —>
2Na^+(aq) + SO4^2-(aq) + Ba^2+(aq) + 2NO3^-(aq) —> BaSO4(s) + 2Na^+(aq) + 2NO3^-(aq)
Cancel the spectator ions i.e Na^+ and NO3^- to obtain the net ionic equation.
SO4^2-(aq) + Ba^2+(aq) —> BaSO4(s)
a cup of coffee changes from a temperature of75ﾟC to 12ﾟC. What is the change in temperature in ﾟC
Explanation:
why is because I never did this class
hxhdhdvhshwhzhzbs dsybsj hshsjshdvsk hate and hensksnsb show hxbshsn Hicks ay the back
A small amount of solid calcium hydroxide is shaken vigorously in a test tube almost full of water until no further change occurs and most of the solid settles out. The resulting solution is:______.
Answer:
Lime water, [tex]Ca(OH)_{2}_({aq} )[/tex] is formed.
Explanation:
Lime-water is a clear and colourless dilute solution of aqueous calcium hydroxide salt.
Small amounts of calcium hydroxide salt, [tex]Ca(OH)_{2}_(s)[/tex] is sparsely soluble at room temperature when dispersed vigorously. if in excess, a white suspension called 'milk of lime'is formed.
I hope this explanation is helpful.
What is the energy of a photon of electromagnetic radiation with a wavelength of 963.5 nm? (c = 3.00 × 108 m/s, h = 6.63 × 10–34 J · s
Answer:
[tex]E=2.06\times 10^{-19}\ J[/tex]
Explanation:
Given that,
The wavelength of electromagnetic radiation is 963.5 nm.
We need to find the energy of a photon with this wavelength.
The formula used to find the energy of a photon is given by :
[tex]E=\dfrac{hc}{\lambda}\\\\E=\dfrac{6.63\times 10^{-34}\times 3\times 10^8}{963.5\times 10^{-9}}\\\\E=2.06\times 10^{-19}\ J[/tex]
So, the energy of a photon is [tex]2.06\times 10^{-19}\ J[/tex].
Why is it difficult to classify dissolving as simply a physical or a chemical change? (1 point)
O Some substances keep the same molecular structure when they break down, and others do not.
O Some substances release energy when they dissolve, and some absorb energy.
O Some substances taste the same after they dissolve, and others do not.
O Some substances keep the same color when they dissolve, and others do not.
Answer:
It is difficult because of C
Explanation:
The correct answer is:Some substances keep the same molecular structure when they break down, and others do not.
Some substances change their form when they dissolve and some do not. Dissolution can sometimes be regarded as a sort of reaction between a chemical substance and water.
Usually, we can consider dissolution of a substance in water as a sort of chemical reaction for some substances. For instance, an ionic substance interacts with water to form ions. similarly, some salts become hydrolysed in water and give acidic/basic solutions as result of that.
However, some substances do not interact with water upon dissolution. They rather remain as molecular entities because they are not composed of ions.
We can see that some substances keep the same molecular structure when they break down, and others do not keep the same molecular structure when they dissolve hence it is difficult to classify dissolving as a physical or a chemical change.
https://brainly.com/question/1161517
I think I'm typing it into my calculator wrong. I will give brainliest to whoever gets it right.
Answer:
36.7 mg
Explanation:
The following data were obtained from the question.
Original amount (A₀) = 65.1 mg
Rate constant (K) = 2.47×10¯² years¯¹
Time (t) = 23.2 years
Amount of substance remaining (A) =?
Thus, we can obtain the amount of substance remaining after 23.2 years as follow
ln A = lnA₀ – Kt
lnA = ln(65.1) – (2.47×10¯² × 23.2)
lnA = 4.1759 – 0.57304
lnA = 3.60286
Take the inverse of ln
A = e^3.60286
A = 36.7 mg
Therefore, the amount remaining after 23.2 years is 36.7 mg.
Which of the following is a salt that could be generated by combining a weak acid and a weak base? Select the correct answer below:
a) NaCl
b) Na2SO4
c) NH4NO3
d) NH4F
Answer:
d) NH4F
Explanation:
Hello,
In this case, the base resulting from mixing a weak acid and a weak base is d) NH4F since ammonium hydroxide is a wear base and hydrofluoric acid is a weak acid.
Ammonium hydroxide is a weak base since it is not completely ionized in ammonium and hydroxyl ions:
[tex]NH_4OH\rightarrow NH_4^++OH^-[/tex]
Moreover, hydrofluoric acid is a weak acid since it is not completely ionized in hydrogen and fluoride ions:
[tex]HF\rightleftharpoons H^++F^-[/tex]
For the both of the substances, the limit is established by the basic and the acid dissociation constant respectively.
Regards.
13. If atoms from two different elements react to form a compound, the element with a higher
number
will have a negative oxidation
A. atomic radius
B. energy
C. electronegativity
D. atomic number
Answer:
C. electronegativity
Explanation:
THE ELEMENT WITH THE GREATE ELECTRONEGATIVITY IS ASSIGNED A NEGATIVE OXIDATION NUMBER EQUAL TIO ITS CHARGE
Determine whether the following statement about reaction rates is true or false. If the statement is false, select the reason why?
Increasing the temperature of a reaction system decreases the activation energy of the reaction.
Answer:
False
Explanation:
Reaction rates is a field under chemical kinetics that deals with the measure of speed of a chemical reaction. It is the change in the concentration of a reactant or product per unit time.
Activation Energy is a theory been put forward to explain why different chemical reactions proceed at different rates.
Activation Energy theory postulates that for a reactant to transform into a product , the colliding particles or molecules of the reactant must possess a certain amount of energy so as to overcome the reaction barrier.
An important factor which may influence the attainment of activation energy by colliding particles of reactants is the temperature at which the reaction is carried out. The higher the temperature, the greater is the fraction of the reactant particles which possess the activation energy and thus the faster the reaction becomes. SO , in essence increasing the temperature of a reaction system do not decreases the activation energy of the reaction but rather also increases the activation energy of the reaction.
The literature value for the Ksp of Ca(OH)2 at 25 °C is 4.68E−6. Imagine you ran the experiment and got a calculated value for Ksp which was too high. Select all of the possible circumstances which would cause this result.
A. The HCl was more concentrated than the labeled molarity (0.0500 M).
B. The Ca[OH]2 solution may have been supersaturated.
C. The HCl was less concentrated than the labeled molarity (0.0500 M).
D. The Ca[OH]2 solution may have been unsaturated.
E. The titration flask may have not been clean and had a residue of a basic solution.
F. The titration flask may have not been clean and had a residue of an acidic solution.
Answer:
D. The Ca[OH]2 solution may have been unsaturated
Explanation:
The solubility product constant Ksp of any given chemical compound is a term used to describe the equilibrium between a solid and the ions it contains solution. The value of the Ksp indicates the extent to which any compound can dissociate into ions in water. A higher the Ksp, implies more greater solubility of the compound in water.
If the Ksp is more than the value in literature, this false value must have arisen from the fact that the solution was unsaturated hence it appears to be more soluble than it should normally be when saturated.
Which of the following is a covalent bond? A NaCl B K2O C H2O D MgO
Answer:
[tex]H_2O[/tex]
Explanation: Research has proven that ;
Water is a Polar Covalent Molecule
It consists of 2 Hydrogen molecules bonded to one Oxygen molecule and the two hydrogen atoms are not evenly distributed around the oxygen atom.
Experiment:
Part I: Voltaic Cell
Assume that you are provided with the following materials:
Strips of metallic zinc, metallic copper, metallic iron
1M aqueous solutions of ZnSO4, CuSO4, FeSO4, and aqueous iodine (I2)
Other required materials to create Voltaic cells such as beakers, porous containers, graphite rods, a voltmeter, and a few wires with alligator clips.
In this modified version of the lab, after thoroughly studying the lab hand out and watching the videos, identify 4 different combinations of Voltaic cells that are possible to be created with the above materials.
For each cell created, include the following details.
Which electrode was the anode and which was the Cathode?
The anode and cathode half reactions.
Balanced equation for each cell you propose to construct.
Calculated Eocell
Short hand notation (line notation) for each cell (be sure to include the inactive electrode if needed)
Answer:
Here are four possible voltaic cells.
Explanation:
1. Standard reduction potentials
E°/V
I₂(s) + 2e⁻ ⟶ 2I⁻(aq); 0.54
Cu²⁺(aq) + 2e⁻ ⟶ Cu(s); 0.34
Fe²⁺(aq) + 2e⁻ ⟶ Fe(s); -0.41
Zn²⁺(aq) + 2e⁻ ⟶ Zn(s); -0.76
2. Possible Voltaic cells
(a) Zn/I₂
E°/V
Anode: Zn(s) ⟶ Zn²⁺(aq) + 2e⁻; 0.76
Cathode: I₂(s) + 2e⁻ ⟶ 2I⁻(aq); 0.54
Cell: Zn(s) + I₂(s) ⟶ Zn²⁺(aq) + 2I⁻(aq); 1.30
Zn(s)|Zn²⁺(aq)∥I⁻(aq)|I₂(s)|C(s, graphite)
Zn is the anode; graphite is the cathode.
(b) Zn/Cu²⁺
E°/V
Anode: Zn(s) ⟶ Zn²⁺(aq) + 2e⁻; 0.76
Cathode: Cu²⁺(aq) + 2e⁻ ⟶ Cu(s); 0.34
Cell: Zn(s) + Cu²⁺(s) ⟶ Zn²⁺(aq) + Cu(s); 1.10
Zn(s)|Zn²⁺(aq)∥Cu²⁺(aq)|Cu(s)
Zn is the anode; Cu is the cathode.
(c) Zn/Fe²⁺
E°/V
Anode: Zn(s) ⟶ Zn²⁺(aq) + 2e⁻; 0.76
Cathode: Fe²⁺(aq) + 2e⁻ ⟶ Fe(s); -0.41
Cell: Zn(s) + Fe²⁺(s) ⟶ Zn²⁺(aq) + Fe(s); 0.35
Zn(s)|Zn²⁺(aq)∥Fe²⁺(aq)|Fe(s)
Zn is the anode; Fe is the cathode.
(d) Fe/I₂
E°/V
Anode: Fe(s) ⟶ Fe²⁺(aq) + 2e⁻; 0.41
Cathode: I₂(s) + 2e⁻ ⟶ 2I⁻(aq); 0.54
Cell: Zn(s) + I₂(s) ⟶ Zn²⁺(aq) + 2I⁻(aq); 0.95
Fe(s)|Fe²⁺(aq)∥I⁻(aq)|I₂(s)|C(s, graphite)
Fe is the anode; graphite is the cathode.
Which one of the following compounds will be soluble in water?
A) AgCI
B) PbCO3
C) CaSO4
D) Cu(OH)2
E) LiCl
The compound that has been soluble in water will be LiCl. Thus option E is correct.
The compounds that form stable bonds in water and are easy to dissociate are soluble in water. Generally, ionic compounds are easily soluble in water.
AgCl:It has been an ionic compound, but the dissociation of AgCl will simultaneously form AgCl again making the compound insoluble in water.
[tex]\rm \bold{PbCO_3}[/tex]:It has been a covalent compound, thus it has been insoluble in water.
[tex]\rm \bold{CaSO_4}[/tex]:The compound is covalent in nature, thus it has been hard to dissociate in water.
[tex]\rm \bold{Cu(OH)_2}[/tex]:The copper in the compound has been hard to dissolve and precipitate in the solution.
LiCl:It has been an ionic compound and can be easily dissociated in the water.
Thus the compound that has been soluble in water will be LiCl. Thus option E is correct.
For more information about the soluble compounds, refer to the link:
https://brainly.com/question/1397002
A student wants to examine a substance by altering the bonds within its molecules. Which of the following properties of the substance should the student examine?
Question is incomplete, the complete question is as follows:
A student wants to examine a substance by altering the bonds within its molecules. Which of the following properties of the substance should the student examine?
A. Toxicity, because it can be observed by altering the state of the substance
B. Boiling point, because it can be observed by altering the state of the substance
C. Toxicity, because it can be observed by replacing the atoms of the substance with new atoms
D. Boiling point, because it can be observed by replacing the atoms of the substance with new atoms
Answer:
B.
Explanation:
A student can examine a substance without altering the bonds within the molecules by examining its boiling point.
The boiling point is the property of a substance, at which the substance changes its state, which is from solid to liquid, liquid to gas and others. So, examining the boiling point will alter the bonds within the molecules as the state of substance will change.
Hence, the correct answer is "B".
Determine the percent water in Cuso4.5H20 to 3 significant figures
Answer:
Molar mass is the mass of one mole of a substance and is ontained by adding atomic mases of all the constituent atoms and group of atoms.
Atomic masses: Cu = 63.55 g/mol,
S = 32.07 g/mol
O x 4 = 16.00 g/mol x 4 = 64.00 g/mol
H = 1.008 g/mol,
So, H2O = (2*1.008+16.00)*5 = 90.10 g/mol
Molar mass of CuSO4,5H2O = 249.72 g/mol.
Out of that 249.72 grams, 90.10 grams is water,
So, percentage by mass of water in CuSO4,5H2O
= 90.10*100/249.72 = 36.08.
I think this is what you are asking. hope this helps
A compound is found to contain 29.68 % sulfur and 70.32 % fluorine by mass. What is the empirical formula for this compound?
Answer:
[tex]SF_4[/tex]
Explanation:
The first thing would be to calculate the number of moles of each element in the compound.
No of moles of sulfur (S) = mass/molar mass
= 29.68/32.065 = 0.9256
No of moles of fluorine (F) = mass/molar mass
= 70.32/18.998 = 3.7014
Then, let us find the atomic ratio of each of the element in the compound by dividing by the no of moles by the smallest no of mole:
S : F
[tex]\frac{0.9256}{0.9256}[/tex] = 1 : [tex]\frac{3.7014}{0.9256}[/tex] = 4
Therefore, the empirical formula for the compound is [tex]SF_4[/tex]
Where are the most gases located on the periodic table?
Answer:
They are mostly located in group 18 (column 18), or far right
Given the following equivalents, make the following conversion: 1.00 knop = ? knips
4 clips = 5 blips
1 knop = 6 bippy
3 blip = 18 pringle
1 clip = 10 knip
10 bippy = 8 pringle
Answer:
[tex]6.4knips[/tex]
Explanation:
Hello,
In this case, given the stated equivalences, we can use the following proportional factor in order to compute the required knips:
[tex]knips=1.00knop*\frac{6bippy}{1knop} *\frac{8pringle}{10bippy}* \frac{3blip}{18pringle} *\frac{4clips}{5blips} *\frac{10knip}{1clip} \\\\=6.4knips[/tex]
Regards.
1 knop=6.4 knips
First convert knop to bippy:-
[tex]1\ knop\times\frac{6\ bippy}{1\ knop} =6\ bippy[/tex]
Now, Convert 6 bippy to pringle:-
[tex]6\ bippy\times\frac{8\ pringle}{10\ bippy} =4.8\ pringle[/tex]
Now, convert 4.8 pringle to blip:-
[tex]4.8\ pringle\times\frac{3\ blip}{18\ priangle} =0.8\ blip[/tex]
Now, convert 0.8 blip to clips as follows:-
[tex]0.8\ blip\times\frac{4\ clips}{5\ blip} =0.64\ clip[/tex]
Now, convert 0.64 clip to knips:-
[tex]0.64\ clip\times\frac{10\ knip}{1\ clip} =6.4\ knip[/tex]
Hence, the following conversion is as follows:-
1.00 knop=6.4 knips
To know more about:-
https://brainly.com/question/17229463