Describe and name the different types of collision. In which are the linear momentum and kinetic energy conserved

Answer:

Therefore, the value of x is 41

Explanation:

x=5+36

x=41

Answer:

A. The sound wave will reflect off Buildings and automobiles.

Explanation:

This is because the sound waves would more likely propagate through diffraction through buildings and transmission through the air. It is also more likely to be absorbed by buildings than for multiple reflections to occur off buildings and automobiles. In the process of reflection, these materials would absorb the sound energy thereby reducing its ability to reflect.

Answer:

1.1micro meter

Explanation:

Given that

Constructive interference is

ma = alpha x sin theta

Alpha = 1 x 594 x10^ -9/ sin 32.8°

= 1.1 x 10^ -6m

Explanation:

Answer:

Subrahmanyan Chandrasekhar

Answer:

D. Subrahmanyan Chandrasekhar

Explanation:

Answer:

Torque = 0.012 N.m

Explanation:

We are given;

Mass of wheel;m = 750 g = 0.75 kg

Radius of wheel;r = 25 cm = 0.25 m

Final angular velocity; ω_f = 0

Initial angular velocity; ω_i = 220 rpm

Time taken;t = 45 seconds

Converting 220 rpm to rad/s we have;

220 × 2π/60 = 22π/3 rad/s

Equation of rotational motion is;

ω_f = ω_i + αt

Where α is angular acceleration

Making α the subject, we have;

α = (ω_f - ω_i)/t

α = (0 - 22π/3)/45

α = -0.512 rad/s²

The formula for the Moment of inertia is given as;

I = ½mr²

I = (1/2) × 0.75 × 0.25²

I = 0.0234375 kg.m²

Formula for torque is;

Torque = Iα

For α, we will take the absolute value as the negative sign denotes decrease in acceleration.

Thus;

Torque = 0.0234375 × 0.512

Torque = 0.012 N.m

Answer:

A The father should sit closer to the pivot.

C The longer wrench makes the job easier because less force is needed when there is more distance from the pivot.

A As far from the head of the hammer as possible because this will maximize torque.

D at the opposite side of the seesaw towards the middle

:) gl

Explanation:

If a father and his son want to play on a seesaw then to balance the torque of the seesaw the father should sit near the pivot as he had more weight as compared to his son, while the son should sit a little farther from the pivot point as compared to his father.

Mechanical advantage is defined as a measure of the ratio of output force to input force in a system, It is used to analyze the forces in simple machines like levers and pulleys.

Mechanical advantage = output force(load) /input force (effort)

As given in the problem statement If a father and his son wish to play on a seesaw,

The father should sit close to the pivot because he weighs more than his son, and the son should sit a little farther away from the pivot point than his father. This will help balance the torque of the seesaw.

Thus, the father should sit near the pivot on the one side and the son should sit a little farther from the pivot of a seesaw on the other side.

Learn more about Mechanical advantages, here

brainly.com/question/16617083

#SPJ2

Answer:

Matter's resistance to a change in motion is called INERTIA and is directly proportional to the mass of an object.

Explanation:

Answer:

[tex]\boxed {\boxed {\sf 100 \ J}}[/tex]

Explanation:

We are asked to calculate the work done to move a box.

Work is the product of force and distance or displacement.

[tex]W= F*d[/tex]

A 10 Newton force is applied horizontally on the box. Since the surface is frictionless, there is no force of friction, and the net force is 10 Newtons. The force moves the box 10 meters.

Substitute the values into the formula.

[tex]W= 10 \ N * 10 \ m[/tex]

Multiply.

[tex]W= 100 \ N*m[/tex]

Let's convert the units. 1 Newton meter is equal to 1 Joule, therefore our answer of 100 Newton meters is equal to 100 Joules.

[tex]W= 100 \ J[/tex]

100 Joules of work was done to move the box.

Answer:

Explanation :  B = μ₀i / 2πr

B1 = (2×10^-7) × 1.5/0.02

       = 15 μT

B2 = (2×10^-7 ) ×  1.5/0.04

       = 7.5 μT

total field = 15 μT + 7.5 μT

                  = 22.5 μT

Answer:

11

Explanation:

hope this helps!!!!!

The correct answer is B. Calcite

Explanation:

Mohs hardness scale indicates the hardness of minerals using a scale from 1 to 10 as well as defining the objects or tools that can be used to scratch the minerals. These two features of minerals are shown in the table of the image. About this, it is shown gypsum and talc can be scratched by just a fingernail, considering minerals with a hardness of 2.5 or below can be scratched by a fingernail. In the case of calcite that has a hardness of 3, this cannot be scratched by a fingernail, but it can be scratched by a penny, which works for minerals with a hardness of 3.5 or below. Thus, the correct answer is Calcite.

Answer:

[tex]\large \boxed{\mathrm{C. \ \ \frac{500}{7 \times 15 \times 8} \ g/cm^3 }}[/tex]

Explanation:

[tex]\displaystyle \sf Density = \frac{mass}{volume}[/tex]

[tex]\displaystyle \rho = \frac{m}{V}[/tex]

[tex]\sf mass=500 \ g[/tex]

[tex]\sf volume \ of \ a \ cuboid=width \times length \times height=( 7 \times 15 \times 8) \ cm^3[/tex]

[tex]\displaystyle \rho = \frac{500}{7 \times 15 \times 8}[/tex]

Answer:

The output force of the piston is 105 N.

Explanation:

Given;

the area of the input piston, A₁ = 0.5 m²

the input force of the piston, F₁ = 15 N

the area of the output piston, A₀ = 3.5 m²

the output force of the piston, F₀ = ?

The pressure of the  hydraulic lift is given by;

[tex]P = \frac{F}{A}[/tex]

where;

P is the hydraulic pressure

F is the piston force

A is the area of the piston

[tex]P = \frac{F}{A} \\\\\frac{F_o}{A_o} = \frac{F_i}{A_i} \\\\F_o = \frac{F_iA_o}{A_i} \\\\F_o = \frac{15*3.5}{0.5} \\\\F_o = 105 \ N[/tex]

Therefore,  the output force of the piston is 105 N.

Answer:

counterclockwise

Explanation:

given data

area = 25 cm²

solution

We know that a changing magnetic field induces the current and induced emf is express as

[tex]\epsilon = -N \frac{d \phi }{dt}[/tex]     ..................................1

and we will get here direction of the induced current in the loop that is express by the Lens law that state that the direction of induces current is such that the magnetic flux due to the induced current opposes the change in magnetic flux due to the change in magnetic field

so when magnetic field decrease and point coming out of the paper.

so induced current in the loop will be counterclockwise

dharna is said to be concentration.. it is true

Answer:

The  displacement is  [tex]A_r = 6.071 \ cm[/tex]

Explanation:

From the question we are told that

   The initial displacement is [tex]A_o = 10 \ cm[/tex]

     The displacement at the end of first oscillation is  [tex]A_d = 9.05 \ cm[/tex]

Generally the damping constant of this damped oscillator is mathematically represented as  

           [tex]\eta = \frac{A_d}{A_o}[/tex]

substituting values

           [tex]\eta = \frac{9.05}{10}[/tex]

        [tex]\eta = 0.905[/tex]

The displacement after 4 more oscillation is mathematically represented as

       [tex]A_r = \eta^4 * A_d[/tex]

substituting values

      [tex]A_r = (0.905)^4 * (9.05)[/tex]

      [tex]A_r = 6.071 \ cm[/tex]

Answer:

Displacement reached is 6.0708 cm

Explanation:

Formula for damping Constant "C"

[tex]C^n=\frac{A_2}{A_1}[/tex]                  where n=1,2,3,........n

Where:

[tex]A_2[/tex] is the displacement after first oscillation    

[tex]A_1\\[/tex] is the initial Displacement

[tex]A_1=10\ cm\\A_2=9.05\ cm\\[/tex]

In our case, n=1.

[tex]C=\frac{9.05}{10}\\C=0.905[/tex]

After 4 more oscillation, n=4:

[tex]C^4=\frac{A_6}{A_2}[/tex]                                        

Where:

[tex]A_6[/tex] is the final Displacement after 4 more oscillations.

[tex]A_6=(0.905)^4*(9.05)\\A_6=6.0708\ cm[/tex]

Displacement reached is 6.0708 cm

Answer:

77.96dB

Explanation:

Recall that decibels are a unit of measuring intensity of sound, and depend on the logarithm of the intensity

the intensity, measured in decibels is given by:

I(db)=10log(I/I0)

I is the intensity in MKS units; I0 is the threshold intensity for human hearing (10^-12 W/m^2)

Thus, if the two sounds together have a dB of 81, we know:

81=10log(I/I0)

using the data above, we can find the intensity of the two sounds to be

0.000125 W/m^2

therefore, one firecracker has an intensity half of that, or 0.0000625W/m^2

now use this value to find the dB of one firecracker:

I(dB0=10log(0.0000625/10^-12)=77.96dB

Answer:

testable

Explanation:

high heat can cause browning and or welting

Answer:

A

Explanation:

If it is tested, it will really changed when the plant into low temperature

Answer:

1km=1000m

700km=

700×1000=700000

=700000metres

hope this helps

Answer:

) pulls the ladder in the direction opposite

Explanation:

This is in line with lenz law that states that the magnetic field induced in a conductor act to oppose the magnetic field that produced it

Explanation:

Given that,

Linear speed of both disks is 5 m/s

Mass of disk 1 is 10 kg

Radius of disk 1 is 35 cm or 0.35 m

Mass of disk 2 is 3 kg

Radius of disk 2 is 7 cm or 0.07 m

(a) The angular velocity of disk 1 is :

[tex]v=r_1\omega_1\\\\\omega_1=\dfrac{v}{r_1}\\\\\omega_1=\dfrac{5}{0.35}\\\\\omega_1=14.28\ rad/s[/tex]

(b) The angular velocity of disk 2 is :

[tex]v=r_2\omega_2\\\\\omega_2=\dfrac{v}{r_2}\\\\\omega_2=\dfrac{5}{0.07}\\\\\omega_2=71.42\ rad/s[/tex]

(c) The moment of inertia for the two disk system is given by :

[tex]I=I_1+I_2\\\\I=\dfrac{1}{2}m_1r_1^2+\dfrac{1}{2}m_2r_2^2\\\\I=\dfrac{1}{2}(m_1r_1^2+m_2r_2^2)\\\\I=\dfrac{1}{2}\times (10\times (0.35)^2+3\times (0.07)^2)\\\\I=0.619\ kg-m^2[/tex]

Hence, this is the required solution.

Explanation:

CFL bulbs were made to take the place of incandescent bulbs, which generate light as a result of heat. ... LED (light-emitting diode) is a type of bulb that produces light using a narrow band of wavelengths. LED lighting is more energy efficient than CFL bulb.

Answer:

In an adiabatic process we have

pV γ = const..

This explains that the pressure is a function of volume, p ( V ) ,

So can be written as:

p ( V ) × V γ = p 0 V γ 0 ,

or p ( V ) = p 0 V 0 / V γ

= p 0 V 0 / V ^(7 / 5)

Answer:

Star A has a higher surface temperature than star B.

Explanation:

The effective temperature of a star can be determined by means of its spectrum and Wien's displacement law:

[tex]T = \frac{2.898x10^{-3} m. K}{\lambda max}[/tex] (1)

Where T is the effective temperature of the star and [tex]\lambda_{max}[/tex] is the maximum peak of emission.  

A body that is hot enough emits light as a consequence of its temperature. For example, if an iron bar is put in contact with fire, it will start to change colors as the temperature increase, until it gets to a blue color, that scenario is known as Wien's displacement law. Which establishes that the peak of emission for the spectrum will be displaced to shorter wavelengths as the temperature increase and higher wavelengths as the temperature decreases.

Therefore, star A has a higher surface temperature than star B, as it is shown in equation 1 since T and [tex]\lambda max[/tex] are inversely proportional.

Answer:

269 lb

Explanation:

We first find the tangential acceleration, a on the drums

a = Δv/Δt since the speed of the belt is 11 ft/s after 0.16 s, Δv = 11 ft/s and Δt = 0.16 s

a = Δv/Δt = 11 ft/s ÷ 0.16 s = 68.75 ft/s²

Since torque τ = Tk = Iα where I = moment of inertia of larger drum = Mk² where m = mass of larger drum = 4 lbs, k = radius of gyration of larger drum = 1.25 inches, T = tension due to larger drum and α = angular acceleration of larger drum.

So, T = Iα/k = Mk²α/k = Mαk = Ma (since a = αk )

T = 4 lbs × 68.75 ft/s² = 275 lb

The tension due to the smaller drum is T' = 6 lb  .

So the net tension in the belt is T'' = T - T' = 275 lb - 6 lb = 269 lb

Explanation:

u = 95 m/sec ( Initial speed)

t = 7 sec ( Time of ascent)

According to Equations of Motion :

[tex]s = ut - \frac{1}{2} g {t}^{2} [/tex]

Max. Height = 95 * 7 - 4.9 * 49 = 424. 9 = 425 m

Answer:

332.5 m

Explanation:

At the maximum height, the velocity is 0.

Given:

v₀ = 95 m/s

v = 0 m/s

t = 7 s

Find: Δy

Δy = ½ (v + v₀) t

Δy = ½ (0 m/s + 95 m/s) (7 s)

Δy = 332.5 m

Answer:

Hazards during late childhood

Answer:

No, a rigid body cannot experience any acceleration when the resultant force acting on the body is zero.

Explanation:

If the net force on a body is zero, then it means that all the forces acting on the body are balanced and cancel out one another. This sate of equilibrium can be static equilibrium (like that of a rigid body), or dynamic equilibrium (that of a car moving with constant velocity)

For a body under this type of equilibrium,

ΣF = 0   ...1

where ΣF is the resultant force (total effective force due to all the forces acting on the body)

For a body to accelerate, there must be a force acting on it. The acceleration of a body is proportional to the force applied, for a constant mass of the body. The relationship between the net force and mass is given as

ΣF = ma   ...2

where m is the mass of the body

a is the acceleration of the body

Substituting equation 2 into equation 1, we have

0 = ma

therefore,

a = 0

this means that if the resultant force acting on a rigid body is zero, then there won't be any force available to produce acceleration on the body.

Answer:

λ_A = 700 nm ,   m_B = m_a 2

Explanation:

The expression that describes the diffraction phenomenon is

         a sin θ = m λ

where a is the width of the slit, lam the wavelength and m an integer that writes the order of diffraction

a) They tell us that now lal_ A m = 1

         a sin θ = λ_A

coincidentally_be m = 2

          a sin  θ = m λ_b

as the two match we can match

         λ _A = 2 λ _B

         λ_A = 2 350 nm

         λ_A = 700 nm

b)

For lam_B

       a sin  λ_A  = m_B  λ_B

For lam_A

        a sin θ_A = m_ λ_ A

to match they must have the same angle, so we can equal

           m_B  λ_B = m_A  λ_A

           m_B = m_A  λ_A / λ_B

           m_b = m_a 700/350

           m_B = m_a 2