Answer:
The spring balance (also known as spring scale) is simply a spring fixed at one end with a hook to attach an object at the other. It works by Hooke's Law, which states that the force needed to extend a spring is proportional to the distance that spring is extended from its rest position.
HOW IT WORKS:
It consists of a spring fixed at one end with a hook to attach an object at the other. It works by Hooke's Law, which states that the force needed to extend a spring is proportional to the distance that spring is extended from its rest position. Therefore, the scale markings on the spring balance are equally spaced.
Imagine you and a friend are trying to rearrange the furniture in your classroom. You push on a desk with a force of 150 N to the right. Your friend pushes on the same desk with a force of 50 N to the left. What is the net force on the desk
Answer:
100N
Step-by-step explanation:
If I push on a desk with a force of 150 N to the right and my friend pushes on the same desk with a force of 50 N to the left, this means that I pushed the desk in the positive x direction and the force I applied is F1 = +150N; my friend pushes the desk in the negative x direction and the applied force will be F2 = -50N.
The net force will the sum total of both forces acting on the desk.
Net force F = F1+F2
Given F1 = +150N and F2 = -50N
Net force F = +150N+(-50N)
Net force F = +150N-50N
Net force F = +100N
This answer is not mine so credits to abidemiokin
.2, A car starting from rest has an acceleration of
0.5m/s2, what will be its final velocity after 5
seconds? What distance will be covered by
the car at the end of 5 seconds?
Answer: 2.5 m/s and 6.25 m
Explanation:
u = 0
a = 0.5 m/s²
t = 5 s
v = u + at
= 0 + 0.5 × 5
= 2.5 m/s
s = ut + 1/2 at²
= 1/2 × 2.5 × 5
= 6.25 m
I'm taking physics and trying to figure out the 4 questions to this problem.
Answer:
Explanation:
At t = 1 velocity = 0
At t = 3 velocity = 3
slope of the line = 3-0 / 3-1 = 3/2
At t = 2
velocity = 3/2 x ( 2 - 1 )
= 1.5 m /s
velocity at t = 2 is 1.5 m /s
Position at t = 2 :
displacement at t = 2
area of graph upto t = 2
= 1 / 2 x 1 x 1.5 = .75
position at t = 2 :
= initial position + displacement
= 10 + .75 = 10.75 m
position at 6 s :
displacement at t = 6
area of curve upto t = 6
= 1 / 2 x 2 x 3 + 3 x 3 + 1/2 x 3 x ( 4.5 - 3 )
= 3 + 9 + 2.25
= 14.25 m
position at t = 6
= initial position + displacement
= 10 + 14.25 = 24.25 m
position at 9 s :
displacement at t = 9
area of curve upto t = 9
= 1 / 2 x 2 x 3 + 4 x 3 + 1/2 x 4 x ( 5 - 3 )- 1/2 x 2 x 1.5
= 3 + 12 + 4 - 1.5
= 17.5 m
position at t = 9
= initial position + displacement
= 10 + 17.5 = 27.5 m
how will the pandemic change our life?
You walk 20 feet. What is this distance in centimetres? 0.305 m 100 cm ----------- ----------- 1 ft 1 m
Answer:
609.6 cm is the answer
3) For the graph on the right, the graphical representation between speed and mass could best be described as: A. The speed of fall is directly proportional to the mass. B. The speed of the fall is proportional to the square root of the mass. C. The speed of fall is inversely proportional to the mass. D. The speed of the fall is proportional to the square of the mass. E. There is no relationship between the speed of fall and mass. speed of fall mass
Answer:
B
Explanation:
KE=0.5mv^2
The speed is inversely proportional to the square root of mass
somebody PLEASE help me on this DO NOT waste my answers PLEASE HELP ITS URGENT
This is integrated Physics and Chemistry
Answer:
#1: 8.92 x 10^6 = 8920000
#2: 3.05 x 10^-3 = 0.00305
Explanation:
2 decaliters + 800 deciliters = __________ liters?
Answer:
800 +2 is 802 is decilitre
o.802 is in l
Science occupations can have a significant impact on the economic success of a business.
True
False
Answer:
true
Explanation:
i just took the test
Answer:
TRUE!!!!!
Explanation:
TRUE!!!!!
TRU!!!!!!
TR!!!!!!
T!!!!!!
sketch a velocity time graph for the motion of the body . from the graph explain each step, calculate the total distance covered by the body
Answer: please find the attached file for the solution.
Explanation:
In a velocity time graph for the motion of the body, the total distance covered by the body is area under the graph.
Please find the attached file for the solution.
Scientific models have two basic types. Please select the best answer from the choices provided T F
Answer:
Scientific models have two basic types. FALSE.
Hoped I helped
work done as mass 1 moves to mass 2. the gravitational force between two point masses separated by a distance r is proportional to
Answer:
gravitational force
Effciency of a lever is never 100% or more. why?Give reason
Answer:
Ideally, the work output of a lever should match the work input. However, because of resistance, the output power is nearly always be less than the input power. As a result, the efficiency would go below [tex]100\%[/tex].
Explanation:
In an ideal lever, the size of the input and output are inversely proportional to the distances between these two forces and the fulcrum. Let [tex]D_\text{in}[/tex] and [tex]D_\text{out}[/tex] denote these two distances, and let [tex]F_\text{in}[/tex] and [tex]F_\text{out}[/tex] denote the input and the output forces. If the lever is indeed idea, then:
[tex]F_\text{in} \cdot D_\text{in} = F_\text{out} \cdot D_\text{out}[/tex].
Rearrange to obtain:
[tex]\displaystyle F_\text{in} = F_\text{out} \cdot \frac{D_\text{out}}{D_\text{in}}[/tex]
Class two levers are levers where the perpendicular distance between the fulcrum and the input is greater than that between the fulcrum and the output. For this ideal lever, that means [tex]D_\text{in} > D_\text{out}[/tex], such that [tex]F_\text{in} < F_\text{out}[/tex].
Despite [tex]F_\text{in} < F_\text{out}[/tex], the amount of work required will stay the same. Let [tex]s_\text{out}[/tex] denote the required linear displacement for the output force. At a distance of [tex]D_\text{out}[/tex] from the fulcrum, the angular displacement of the output force would be [tex]\displaystyle \frac{s_\text{out}}{D_\text{out}}[/tex]. Let [tex]s_\text{in}[/tex] denote the corresponding linear displacement required for the input force. Similarly, the angular displacement of the input force would be [tex]\displaystyle \frac{s_\text{in}}{D_\text{in}}[/tex]. Because both the input and the output are on the same lever, their angular displacement should be the same:
[tex]\displaystyle \frac{s_\text{in}}{D_\text{in}} =\frac{s_\text{out}}{D_\text{out}}[/tex].
Rearrange to obtain:
[tex]\displaystyle s_\text{in}=s_\text{out} \cdot \frac{D_\text{in}}{D_\text{out}}[/tex].
While increasing [tex]D_\text{in}[/tex] reduce the size of the input force [tex]F_\text{in}[/tex], doing so would also increase the linear distance of the input force [tex]s_\text{in}[/tex]. In other words, [tex]F_\text{in}[/tex] will have to move across a longer linear distance in order to move [tex]F_\text{out}[/tex] by the same [tex]s_\text{out}[/tex].
The amount of work required depends on both the size of the force and the distance traveled. Let [tex]W_\text{in}[/tex] and [tex]W_\text{out}[/tex] denote the input and output work. For this ideal lever:
[tex]\begin{aligned}W_\text{in} &= F_\text{in} \cdot s_\text{in} \\ &= \left(F_\text{out} \cdot \frac{D_\text{out}}{D_\text{in}}\right) \cdot \left(s_\text{out} \cdot \frac{D_\text{in}}{D_\text{out}}\right) \\ &= F_\text{out} \cdot s_\text{out} = W_\text{out}\end{aligned}[/tex].
In other words, the work input of the ideal lever is equal to the work output.
The efficiency of a machine can be measured as the percentage of work input that is converted to useful output. For this ideal lever, that ratio would be [tex]100\%[/tex]- not anything higher than that.
On the other hand, non-ideal levers take in more work than they give out. The reason is that because of resistance, [tex]F_\text{in}[/tex] would be larger than ideal:
[tex]\displaystyle F_\text{in} = F_\text{out} \cdot \frac{D_\text{out}}{D_\text{in}} + F(\text{resistance})[/tex].
As a result, in real (i.e., non-ideal) levers, the work input will exceed the useful work output. The efficiency will go below [tex]100\%[/tex],
A car is traveling South on I-85. It travels between two exits that are 5.40 km apart in 4.85 minutes. What is the average velocity of the car in m/s?
Answer: 18.56 m/sec
Explanation:
Average velocity =distance/time=5400/(4.85*60)=18.56 m/sec
If three forces are equal and thier resultant force is zero, then measure of its internal angle is _____
Answer:
45 degrees
Explanation:
Which material will displace a volume of water? Which material will displace a volume of water less than its own volume? Which material will displace a volume of water equal to its own volume? Which material will displace a volume of water greater than its own volume?
Answer:
1. all of them
2. cork and wax
3. iron, lead, and aluminum
4. none of them
Explanation:
1.Which material will displace a volume of water? all of them
When an object is introduced into a container with a volume of water, a volume of liquid equal to the volume of the object is displaced
2.Which material will displace a volume of water less than its own volume?
cork and wax
because the density of the object is less than that of the displaced liquid
3.Which material will displace a volume of water equal to its own volume?
iron, lead, and aluminum
because Arquimedes's principle: any body plunged inside a fluid in this case water experiences an ascending force called push, equivalent to the weight of the fluid removed by the body
4.Which material will displace a volume of water greater than its own volume?
None of them
Answer:
1. all of them
2. cork and wax
3. iron, lead, and aluminum
4. none of them
Explanation:
a man can swim with a speed of 5m/s in calm water. if this man swims crosses a specific river his speed is 3m/s. if he takes the minimum time to cross the river find the speed of the flow of water in the river...
plz answer me with all the steps!
I'll give u points ..mark brainliest and follow u
Answer:
The speed of the flow of water in the river is 4 m/s.
Explanation:
Given that,
Speed of man = 5 m/s
If this man swims crosses a specific river his speed is 3 m/s.
If he takes the minimum time to cross the river
Let the speed of flow of water be [tex]v_{r}[/tex]
We need to calculate the speed of the flow of water in the river
Using formula for velocity
[tex]v_{rs}^2=v_{r}^2+v_{s}^2[/tex]
[tex]v_{r}^2=v_{rs}^2-v_{s}^2[/tex]
Where, [tex]v_{s}[/tex] = velocity of swimmer
[tex]v_{sr}[/tex] = relative velocity
[tex]v_{r}[/tex] = velocity of river
Put the value into the formula
[tex]v_{r}^2=5^2-3^2}[/tex]
[tex]v_{r}=\sqrt{5^2-3^2}[/tex]
[tex]v_{r}=4\ m/s[/tex]
Hence, The speed of the flow of water in the river is 4 m/s.
When 10 N force applied at 30 degrees to the end of a 20 cm handle of a wrench, it was just able to loosen the nut. What magnitude of the force would require to just loosen the nut, if the force apply perpendicularly at the end of the handle
Answer:
5NExplanation:
To get the magnitude of the force would require to just loosen the nut, if the force apply perpendicularly at the end of the handle, we will have to resolve the force perpendicular to the wrench. Torque is the turning effect of a body or force about a point. It is similar to moments.
Torque = Force * radius
Note that the force must be perpendicular to the wrench. On resolving the force perpendicularly to the wrench, we will have to resolve the force to the vertical.
Fy = Fsinθ
Fy = 10sin30°
Fy = 10 * 0.5
Fy = 5N
Torque = Fy * r
Given Fy = 5N and r = 20cm = 0.2m
Torque = 5 * 0.2
Torque = 1Nm
Hence the magnitude of the force would require to just loosen the nut, if the force apply perpendicularly at the end of the handle is 5N
Convert 8.1 kilograms to grams
Answer:
8100 g
Explanation:
8.1 kg × 1000
= 8100 g
Answer:
8,100 Grams
Explanation:
To change Kilograms to Grams, you multiply the mass value by 1000.
So, 8.1kg x 1000 = 8,100g.
Hope this helps!
Define investigation to show its scientific meaning.
Answer:
the action of investigating something or someone; formal or systematic examination or research.
Explanation:
This definition is provided by Oxford Languages
50 POINTS
A graph of velocity versus time for an object shows a straight line with positive slope. What does that indicate about the acceleration of the object?
- the acceleration is changing
- the acceleration is zero
- the acceleration is constant and positive
Answer:
The acceleration is constant and positive
Explanation:
The straight line indicates that the acceleration is constant, while the positive slope indicates that the line is positive.
Answer:
^^^
Explanation:
Put a ball on the floor what forces are acting on it
Answer: Gravity
Explanation: Gravity is pulling down on the ball, making it stay on the floor
1150 g - 0.652 kg = ______________g?
Answer:
The required answer is 498 gram
this is a device used to change the flow of electricity through a circuit
Answer:
Transformers are devices used in electrical circuits to change the voltage of electricity flowing in the circuit. Transformers can be used either to increase the voltage or decrease the voltage.
6. I ran 12.2 km in 1.4 hours. Then I ran another 19.3 km uphill in 2.2 hours. What was my average speed?
Answer: 8.75 km/hr
Explanation:
Concept to know
Average speed: total distance/total time
-------------------------------------------------------
total distance/total time
=(12.2+19.3)/(1.4+2.2) ⇔ add the numbers of two time running together
=31.5/3.6 ⇔ simplify
=8.75 km/hr
Hope this helps!! :)
Please let me know if you have any question
What energy is directly dependent upon velocity and mass?
A mechanical energy
O B. total energy
C. potential energy
O D. kinetic energy
Answer:
Kinetic energy
Explanation:
In a swimming meet, the swimmers swim a total of 8 laps of a 50-meter-long swimming pool. What is the distance traveled by a swimmer in this meet? What is swimmer's displacement?
Explanation:
It is given that, swimmers swim a total of 8 laps of a 50-meter-long swimming pool. We need to find the distance traveled by a swimmer in this meet.
Distance = total path covered during entire journey
In every lap he covers a distance of 50 m. It means in 8 laps it will cover 8×50 = 400 meters.
Displacement = shortest path covered
After 8 laps, the swimmer ultimately comes to the starting point. It means its displacement is equal to 0.
The digigram shows a vertical number line.
What is the position of point X?
х
016
-12
12
16
0
Answer:
16
Explanation:
The position of X is 16 because they gap between -4 and 0 is 4.
843 L - 0.028 kL = ______________L?
Answer: 815 L
Explanation:
0.028 kL=28L (times 1000)
843 L-0.0028 kL=843L-28L=815 L
Hope this helps!! :)
Please let me know if you have any question or need any further explanation
Which of the following is an example of a primary source?
A. Scientific journal
B. Dictionary
C. Encyclopedia
D. Newspaper
Answer:
scientific journal
in my guess
Answer:
scientific journalExplanation: