Determine the number of atoms of O in 7.23 moles of Fe(NO₃)₃.

Answer:

The answer is if a solid gets dissolved in a liquid then sedimentation and decantation cannot be used because these methods are used to separate an insoluble solid substance but if we add a little sugar or salt it will dissolve in the liquids it is soluble solid making it hard to separate.

Explanation:

I hope this helps

Based on the mass of the sample, the percentage mass of urea in the urea/cholesterol mixture is 65.3%.

The percentage mass of urea in the urea/cholesterol mixture is determined using the formula below:

The mass of urea in the sample is obtained using the formula below:

During the separation procedure of the mixture, urea which is soluble in water goes into the solvent phase whereas cholesterol is obtained as a solid.

Hence, the 0.52 g solid sample collected is cholesterol.

mass of urea = 1.50 - 0.52

mass of urea = 0.98

Percentage urea = 0.98/1.5 * 100%

Percentage mass of urea = 65.3%

Learn more about percentage mass at: https://brainly.com/question/13896694

#SPJ1

1. Baking cookies in the oven is an example of how energy is conserved.

2. Electrical energy is neither transformed nor transferred.

3. Thermal energy either moves from one object to another as it is transferred or changes into a different form as it is transformed.

Baking is the process of cooking with dry heat, particularly in an oven. It is most likely the oldest type of cooking. Bakery goods including bread, rolls, cookies, pies, pastries, and muffins are typically made with flour or meal that comes from grains of some kind.

The stages of the ingredients originally start out in distinct states (e.g., flour is solid, eggs are liquid, etc.), and they change several times as the cookies bake. When they are combined to create cookie dough, a state known as a colloid results (like a mix between solid and liquid). Eventually, the cookies reach a solid state when baking is.

Thus, Baking cookies in the oven is an example of how energy is conserved . Electrical energy is neither transferred or transformed . Thermal energy either moves from one object to another as it is transferred or changes into a different form as it is transformed.

To learn more about conservation of energy refer- https://brainly.com/question/24772394

#SPJ1

Metallic bonds occur amid metal atoms. Whereas ionic bonds combine metals with non-metals, metallic bonding fixes several metal atoms.

An ionic bond is formed by joining a metal and a nonmetal, while a covalent bond is formed by allying two nonmetals. So we check the periodic table to see if our compound is made up of metals or nonmetals, or of two nonmetals.

Covalent compounds are built when two nonmetals react with each other. Since hydrogen is a nonmetal, binary compounds that carry hydrogen are also usually covalent compounds. Metallic elements produced compounds with non-metallic elements with the help of ionic bonds.

So we can conclude that In metals, the electrons leave the outer shells of metal atoms, devise positive metal ions and a 'sea' of delocalized electrons.

Learn more about metallic bonds here: https://brainly.com/question/20536777

#SPJ1

Answer:

It is definitely friction

Answer:

298k

Explanation:

because 298k is lower than 302k

The specific heat of a 95.01 g piece of an unknown metal that exhibits a 45.2°C temperature change upon absorbing 1870 J of heat is 0.44J/g°C.

The specific heat capacity of a metal can be calculated using the following:

Q = mc∆T

Where;

According to this question, a 95.01 g piece of an unknown metal exhibits a 45.2°C temperature change upon absorbing 1870 J of heat. The specific heat capacity can be calculated as follows:

1870 = 95.01 × c × 45.2

1870 = 4294.452c

c = 0.44J/g°C

Therefore, 0.44J/g°C is the specific heat capacity of the metal.

Learn more about specific heat capacity at: https://brainly.com/question/28302909

#SPJ1

Answer:

24.984466667

Explanation:

add all mass values and divide by amount (3)

The wavelength of the cosmic ray when the frequency is 2.3 x 10^24 Hz is 1.304 x 10^-7 nm.

What is wavelength?

Wavelength in a wave is the distance between any given point on a wave and the same point on the adjacent wave that is crest to crest or trough to trough. It can be measured in the direction of the given wave.

The wavelength in nm of the cosmic ray can be calculated as,

λ = c / ν

where λ is the wavelength, ν is frequency in Hz or s^-1 and c is velocity of light.

λ = (3 x 10^8 m/s) / 2.3 x 10^24 Hz = 1.304 x 10^-16 m = 1.304 x 10^-7 nm.

Therefore, the wavelength of the cosmic ray when the frequency is 2.3 x 10^24 Hz is 1.304 x 10^-7 nm.

To know more about wavelength click on the given link https://brainly.com/question/10750459

#SPJ1

Avogadro's constant is the same as the number of copper II sulfate formula units in 160g of copper II sulfate; option C.

Avogadro's constant is a number that describes the number of particles in 1 mole of a substance.

The value of the Avogadro constant is 6.02 * 10²³.

The carbon-12 isotope is used as the standard to define the mole of a substance.

12 grams of the carbon-12 isotope contains the Avogadro number of particles which is equal to 6.02 * 10²³.

Hence, 1 mole of a substance is defined as the amount of a substance that contains as many elementary particles as there are in 12 grams of carbo-12.

Considering the given substances:

a. 24g of magnesium off magnesium contains two moles of magnesium atoms.

b. 14g of nitrogen gas contains 0.5 moles of nitrogen gas molecules

c. 160g of copper (ii) sulfate contains 1 mole of copper (ii) sulfate formula units. Hence, this is equal to the  Avogadro constant

Learn more about Avogadro's constant at: https://brainly.com/question/15989275
#SPJ1

Volume the fluorine gas occupies = 0.73L

What is volume of a gas ?

The gas's volume:

The area occupied by gaseous particles under normal temperature and pressure circumstances is referred to as the volume of gas.

It is identified as a "V."

The letter "L" stands for "liters," the SI unit of volume.

At normal temperature, a mole of gas has a volume of 24 m3, or 24 000 cm3.

The molar volume of a gas is the name given to this quantity.

The gas equation

PV = n R T

P = pressure = 2.04 atm

T = temperature = 5.20 Celsius = 278.20K

V = volume

n = no of moles = 1.24/19 = 0.065moles

R = gas constant = 0.0821lit atm /K

V = 0.065*0.082*278.20/ 2.04 =  0.73L

Volume the fluorine gas occupies = 0.73L

To know about volume from the link

https://brainly.com/question/27100414

#SPJ1

Answer:

No entendí porfavor puedes explicarme

Based on the given frequency of the wave, the wavelength of the wave is 3.75 * 10⁻⁷ m.

The frequency of a wave is the number of complete oscillations performed by the wave per second.

The wavelength is the distance between successive points on the wave.

The relationship between the wavelength and frequency of a wave is given below:

Wavelength = velocity / frequency

Assuming the given wave is an electromagnetic wave, the velocity of the wave is 3.0 * 10⁸ m/s

Wavelength = 3.0 * 10⁸ m/s / 8.50 * 10¹⁴ s⁻¹

Wavelength = 3.75 * 10⁻⁷ m

Learn more about wavelength and frequency at: https://brainly.com/question/28816540

#SPJ1

Explanation:

Write a short report describing your ideas for a school of the future. You can suggest changes to:

• school buildings and classrooms.

• the library

• the cafeteria

• how classes are taught.

Give a reason for each of your suggestions. Use a variety of synonyms and accurate vocabulary.

200 words only

This reaction, CIO + O - CI + O2, is an example of an endothermic chemical reaction, where the reactants take heat energy from their environment and use it to create products.

Endothermic chemical reactions occur when the reactants take in heat energy from their environment to create products. A cooling effect is produced by these reactions because they cause their surroundings to become cooler.

Exothermic means that the chemical reaction releases energy. In exothermic reactions, bonds are broken in the reactants, but more energy is released when the bonds are broken in the products. Endothermic chemical processes are those that take up (or utilize) energy.

To know more about endothermic visit:

https://brainly.com/question/23184814

#SPJ13

Answer:

The answer is 117.

Explanation:

There’s not really a way to calculate atomic radius. It comes from empirical data and is in the periodic table. The only way I can think of is Bohr’s radius constant.

₀ = 4₀(ℎ bar)²/_e (_e)²

Calculating atomic radius can get complicated so it’s best to leave it at this.

The mass percentage of HCl 11,900x/118 g and molality of solution is   9.915 mol L^-1.

Molarity = 11.8 M

Molarity = (moles of HCl) / (litres of solution)

Molality = (moles of HCl) / (kilograms of solvent)

=> Let number of moles of HCl present be x moles.

So, 11.8 = x/litres of solution

litres of solution = x/11.8 litres.

So, volume in mL = x/11.8 * 1000 mL =>10,000x/118 mL

Density of solution = 1.19 g/ml

So, D = m/v

Mass of solution = D * v => 1.19 * 10,000x/118 => 11,900x/118 g

=> (11,900x/118)/1000 L => 11.9x/118 litres

Moles of HCl = x moles.

Molality = x/( 11.9x/118)

=> 118x/11.9x => 118/11.9 => 9.9156 mol L-1

=> Molality of solution = 9.915 mol L-1 (approx.)

To learn more about molality visit:https://brainly.com/question/26921570

#SPJ9

The equilibrium constant K of the electrochemical cell is 2.976.

The equilibrium constant of a chemical reaction is described as the value of its reaction quotient at chemical equilibrium, a state approached by a dynamic chemical system after sufficient time has elapsed at which its composition has no measurable tendency towards further change.

We have that:

ΔG = -nFE°cell

n = 2

Force value = 96,500 J/(V･mol)

E°cell = +0.0140 V

ΔG = -(2 *  96,500  * 0.0140)

ΔG = -2702 J

Then,

But;

ΔG = -R TlnK

lnK = -(ΔG/RT)

The value of K = e^[-(ΔG/RT))

The value of K = e^[-(( -2702)/8.314 * 298]

The value of K = 2.976

Learn more about equilibrium constant at:

https://brainly.com/question/3159758

#SPJ1

The hissing sound from the water bottle occurred due to increase in thermal energy of the car which is the immediate environment of the water bottle.

Thermal energy is defined as the type of energy that expresses the flow of heat through a medium.

When there is increase in heat energy, outside the an enclosed medium such as a car, all the contents within the medium also increases in temperature.

There is also a rise in temperature of water in the water bottle and this causes the water molecules to gain energy, vibrate and collide more often among each other.

The hissing sound occurs due to a rise in pressure of the water occuring due to rise in temperature.

Learn more about temperature here:

https://brainly.com/question/26141817

#SPJ1

Having disposal sites where people can safely dispose of medications, household cleaners and waste instead of pouring them down their sink drains impacts the environment by reducing water pollution.

What is water pollution?

Pouring chemicals down the drain poses the most immediate risk of water pollution. Chemicals are harmful for consumption by all living things when they are dumped down the drain because of the effects they have on our rivers, lakes, streams, and other water supplies.

In regions where contamination is happening, human health might suffer, which can cause serious health problems. Animals and plants that are given contaminated water get sick and die, which has an impact on agriculture as well.

To learn more about  water pollution from the given link

https://brainly.com/question/1235358

#SPJ1

Answer:

a. Yes, both W and Y have the same atomic number. Since the atomic mass equals the sum of protons (which is the atomic number) and neutrons, both W and Y have different numbers of neutrons, making them isotops of each other.

b. Both W and Y have the same atomic number, making both the same element. Therefore they have the same chemical properties.

c. W: 29 protons, 34 neutrons, 29 electrons

Y: 29 protons, 36 neutrons, 29 electrons

Explanation:

a. Yes, both W and Y have the same atomic number. Since the atomic mass equals the sum of protons (which is the atomic number) and neutrons, both W and Y have different numbers of neutrons, making them isotops of each other.

b. Both W and Y have the same atomic number, making both the same element. Therefore they have the same chemical properties.

c. W: 29 protons, 34 neutrons, 29 electrons

Y: 29 protons, 36 neutrons, 29 electrons

Remember: mass number = protons (atomic #) + neutrons

-28.1 °F is a temperature in Fahrenheit and is converted to degrees Celsius and Kelvin as follows:

Temperature is the measure of cold or heat, often measurable with a thermometer.

Temperature can be measured in the following units;

Kelvins (absolute temperature)

Kelvins (K) is the international system of units (S.I unit), the base unit of thermodynamic temperature; 1⁄273 of the thermodynamic temperature of the triple point of water.

Degrees Celsius is the metric unit of temperature, a derived unit of the International System of Units.

°F is converted to °C as follows:

(32°F − 32) × 5/9 = 0°C

-28.1°F = -33.39°C

°F is converted to K as follows:

(-28.1°F − 32) × 5/9 + 273.15 = 239.761K

= 239.76K

Learn more about temperature at: https://brainly.com/question/13421795

#SPJ1

If a gas has a volume of 145 mL at 125 °C, then it will have 108.56 mL at 25 °C.

According to Charles’ law, the volume of a gas is directly proportional to the temperature.

Thus, V1/T1=V2/T2 .......(i)

Here, V1 ⇒ initial volume

T1  ⇒ initial temperature in Kelvin

V2 ⇒ final volume

T2 ⇒ final temperature in Kelvin.

In the given question:

V1 = 145mL

T1 = 125°C= (125+273)K= 398K

T2 = 25°C= (25+273)K= 298K

Putting these values in equation (i),

145mL / 398K = V2 / 298K

Solving for V2, we get

V2 = 145mL * 298K /398 K

V2 = 108.56 mL

Therefore, at 25 °C, the gas will have a volume of 108.56 mL.

Read more about Charles' law:

brainly.com/question/16927784

The following is involved in bonding between atoms is electron

There are four type of chemical bonds essential for life to exist and it is ionic bond, covalent bond, hydrogen bond, and Vander wall interaction and all of these are different kind of bond to play various role in biochemical interaction and the electron on the outermost energy level of the atom are called valence electron and the valence electron are involved in bonding one atom yo another

Know more about atom

https://brainly.com/question/18086077

#SPJ9

The formula of the hydrate would be  [tex]MgSO_4.6H_2O[/tex].

In order to get the formula of the hydrated salt, the empirical formula method can be used to know the mole of the salt and that of the water.

The formula of magnesium sulfate = [tex]MgSO_4[/tex]

The formula of water = [tex]H_2O[/tex]

Mass of hydrated magnesium sulfate = 18.00 g

Mass of anhydrous magnesium salt = 9.211g

Mass of water = 18 - 9.211

                      = 8.789 g

Now, let's find the mole equivalent of each component:

Molar mass of magnesium sulfate = 120.366 a/mol

Molar mass of water = 18.01 g/mol

Mole of magnesium sulfate anhydrous = 9.211/120.366

                                                                 = 0.0765 mole

Mole of water = 8.789/18.01

                       = 0.4880 mole

Now, let's divide by the lowest mole:

Magnesium sulfate = 0.0765/0.0765

                                 = 1

Water = 0.4880/0.0765

           = 6.37

Thus, the mole ratio of magnesium sulfate and water of hydrate is 6 to 1. Therefore, the formula of the hydrated salt would be [tex]MgSO_4.6H_2O[/tex].

More on hydrated salts can be found here: https://brainly.com/question/5586505

#SPJ1

Answer:

0.40 mole of A

Explanation:

1 mole of A to produce 2 moles of C

so the number of mole of A to produce 0.80 mole of C is:

(0.80 x 1)/(2) = 0.40 mole

The frequency of the photon is 3.57 * 10^14 Hz. the energy in joules is 2.4 * 10^-19 J while the energy in kJ/mol is 3.9 * 10^-40 kJ/mol.

The energy of the photon can be obtained by the use of an adaptation of the Plank equation. Let us now use;

E = hc/λ

E = energy

h = Plank Constant

c = Speed of light

λ = wavelength

a)

c = λf

f = c/λ

Substituting values;

f = 3 * 10^8/839.6 * 10^-9

f = 3.57 * 10^14 Hz

b)

E = 6.6 * 10^-34 * 3 * 10^8/ 839.6 * 10^-9

E = 2.4 * 10^-19 J

c)

Energy in kJ/mole

Substituting values;

2.4 * 10^-19 J * 10^3/6.02 * 10^23

= 3.9 * 10^-40 kJ/mol

Learn more about photon:https://brainly.com/question/20912241

#SPJ1

From the mole ratio of the reaction, the mass of magnesium bromide formed when 1.00 g of magnesium reacts with 5.00 g of bromine is 2.88 g.

The mole ratio of the reaction between magnesium and bromine to form magnesium bromide is found in the equation of the reaction.

The equation of reaction is given below as follows:

Mole ratio of magnesium to bromine is 1 : 1

Moles of magnesium reacting = 1 / 24 moles

Moles of magnesium = 0.0416

Moles of bromine reacting = 5 / 180

moles of bromine reacting = 0.0277 moles

Bromine is the limiting reactant

Mass of magnesium bromide formed = 0.0277 * 104 g

Mass of magnesium bromide formed = 2.88 g

Learn more about mole ratio at: https://brainly.com/question/19099163

#SPJ1