Determine whether each phrase describes carboxylic acids or esters.a. Do not form hydrogen bonds amongst themselves and have higher vapor pressureb. Form hydrogen bonds amongst themselves and have lower vapor pressurec. Notable for their pleasant fragrancesd. Their reactions with base are kn. own as saponificationse. Usually have a sour odorf. Their reactions with base are known as neutralizations

Answer: [tex]\Delta H = -272.25kJ[/tex] for 1 mole of NO.

Explanation: Hess' Law of Constant Summation or Hess' Law states that the total enthalpy change of a reaction with multiple stages is the sum of the enthalpies of all the changes.

For this question:

1) [tex]N_{2}_{(g)} + 3H_{2}_{(g)}[/tex] => [tex]2NH_{3}_{(g)}[/tex]       [tex]\Delta H=-92kJ[/tex]

2) [tex]4NH_{3}_{(g)}+5O_{2}_{(g)}[/tex] => [tex]4NO_{(g)}+6H_{2}O_{(g)}[/tex]       [tex]\Delta H=-905kJ[/tex]

Amonia ([tex]NH_{3}_{(g)}[/tex]) appeares as product in the first equation and as reagent in the 2 reaction, so when adding both, there is no need to inverse reactions. However, in the 2nd, there are 4 moles of that molecule, so to cancel it, you have to multiply by 2 the first chemical equation and enthalpy:

[tex]2N_{2}_{(g)} + 6H_{2}_{(g)}[/tex] => [tex]4NH_{3}_{(g)}[/tex]     [tex]\Delta H=-184kJ[/tex]

Now, adding them:

[tex]2N_{2}_{(g)} + 6H_{2}_{(g)}[/tex] => [tex]4NH_{3}_{(g)}[/tex]     [tex]\Delta H=-184kJ[/tex]  

[tex]4NH_{3}_{(g)}+5O_{2}_{(g)}[/tex] => [tex]4NO_{(g)}+6H_{2}O_{(g)}[/tex]       [tex]\Delta H=-905kJ[/tex]

[tex]2N_{2}_{(g)}+6H_{2}_{(g)}+5O_{2}_{(g)}=>4NO_{(g)}+6H_{2}O_{(g)}[/tex]  [tex]\Delta H = -185-905[/tex]

[tex]2N_{2}_{(g)}+6H_{2}_{(g)}+5O_{2}_{(g)}=>4NO_{(g)}+6H_{2}O_{(g)}[/tex]  [tex]\Delta H = -1089kJ[/tex]

Note net enthalpy is for the formation of 4 moles of nitric oxide.

For 1 mole:

[tex]\Delta H = \frac{-1089}{4}[/tex]

[tex]\Delta H=-272.25kJ[/tex]

To form 1 mol of nitric oxide from nitrogen, oxygen and hydrogen, net change in enthalpy is [tex]\Delta H=-272.25kJ[/tex].

Answer:

B. pOH = 14 - pH and D. pH = 14 - pOH.

Explanation:

Hello,

In this case, we must remember that pH and pOH are referred to a measure of acidity and basicity  respectively, since pH accounts for the concentration of H⁺ and pOH for the concentration of OH⁻ in a solution. In such a way, since the maximum scale is 14, we say that the addition between the pH and pOH must be 14:

[tex]pH+pOH=14[/tex]

Therefore, the correct answers are B. pOH = 14 - pH and D. pH = 14 - pOH since the both of them are derived from the previous definition.

Best regards.

Answer:

D: by subtracting the pOH from 14.

Explanation:

Answer:

The products are KNO3 + PbCl2.....

Espero que te sirva.

Answer:

[tex]m_{AgBr}=1.48gAgBr[/tex]

Explanation:

Hello,

In this case, the undergoing chemical reaction is:

[tex]KBr(aq)+AgNO_3(aq)\rightarrow AgBr(s)+KNO_3(aq)[/tex]

Thus, since the potassium bromide and silver nitrate are in a 1:1 mole ratio, the first step is to identify the limiting reactant, by considering the reacting volumes of reactants in order to compute the available moles of potassium bromide and the moles of potassium bromide consumed by the 15.4 mL of 0.512-M solution of silver nitrate:

[tex]n_{KBr}=0.0599L*0.282\frac{molKBr}{L} =0.0169molKBr\\\\n_{KBr}^{consumed}=0.0154L*0.512\frac{molAgNO_3}{L} *\frac{1molKBr}{1molAgNO_3}=0.00788molKBr[/tex]

In such a way, since less moles are consumed than available, we infer that silver nitrate is the limiting reactant, for which the resulting grams of silver bromide (molar mass 187.8 g/mol) result:

[tex]m_{AgBr}=0.00788molAgNO_3*\frac{1molAgBr}{1molAgNO_3} *\frac{187.8gAgBr}{1molAgBr} \\\\m_{AgBr}=1.48gAgBr[/tex]

Best regards.

Answer:

Explanation:

Answer:

Pb + 2H2O --> PbO2 + 2H2

Explanation:

Products:

Solid metal; PbO2

Hydrogen; H

Reactants:

Metal; Pb

Steam; H2O

Reactants --> Products

Pb + H2O --> PbO2 + H2

Upon balancing we have;

Pb + 2H2O --> PbO2 + 2H2

Answer:

W = 278.64375 Joules

Explanation:

The information given in this problem are;

Initial volume = 0L

Final volume = 2.50L

ΔV = 2.50 - 0 = 2.50 L

External pressure, P =  1.10 atm

Work = ?

These parameters are related by the equation;

w = - P ΔV

W = - (1.10 )(2.50)

W = 2.75 L atm

Upon conversion to joules;

1 liter atmosphere is equal to 101.325 joule

W = 278.64375 Joules

Answer and Explanation:

a. The equation of K of this reaction is shown below:-

3 A + 5 B + 4 C↔5 D + 7 E + F

[tex]K = \frac{(D)^5 (E)^7 (F)}{(A)^3 (B)^5 (C)^4}[/tex]

b. The moles of compound F is shown below:-

3 A + 5 B + 4 C↔5 D + 7 E + F

               2 moles

Now, the mole of produced is

[tex]= \frac{1}{4} \times \ moles\ of\ c[/tex]

Now, we will the value of c by using the above equation

[tex]= \frac{1}{4} \times 2[/tex]

After solving the above equation we will get

0.5 moles

DNA and RNA can also be ISOLATED from the same biological sample.

So the answer is no, both DNA and RNA are together.

Answer:

so the answer is no

both DNA and RNA are together.

Explanation:

DNA and RNA can also be ISOLATED from the same. biological sample

Answer:

Fe(s) + Cu^2+(aq) ---> Fe^2+(aq) + Cu(s)

Explanation:

The ionic equation shows the actual reaction that took place. It excludes the spectator ions. Spectator ions are ions that do not really participate in the reaction even though they are present in the system.

For the reaction between iron and copper II nitrate, the molecular reaction equation is;

Fe(s) + Cu(NO3)2(aq)----> Fe(NO3)2(aq) +Cu(s)

Ionically;

Fe(s) + Cu^2+(aq) ---> Fe^2+(aq) + Cu(s)

The total kinetic energy of a body is known as Thermal energy. Option A

Thermal energy is the direct sum of all the available random kinetic energies of molecules.

Also note that thermal energy is directly proportional to temperature in Kelvin.

Thus, the total kinetic energy of a body is known as Thermal energy. Option A

Learn more about thermal energy here:

https://brainly.com/question/19666326

#SPJ1

Answer:

A.) Thermal energy

Explanation:

I got it correct on founders edtell

Based on comparison of energy produced per kilogram, a given mass of methane produces more energy than similar masses of either paraffin or isopropanol, therefore;

Methane is a good choice as a fuel

The reason for the above comparison conclusion is as follows:

The given information:

The details of the combustion of the methane gas, CH₄, are as follows;

The mass of the methane gas placed in the calorimeter, m = 40.0 g

The amount of heat released from the combustion of the 40.0 grams of methane = 2,800 kJ

The data from online resources of paraffin  and isopropanol includes

1. The energy value of paraffin = 46 MJ/kg

The energy value of isopropanol = 33.6 MJ/kg

The energy produced from 1 kilogram of methane gas is given as follows;

40.0 g of methane gas produces 2,800 kJ of energy, therefore;

1 kg = 1,000 g of methane gas will produce, 2,800kJ/(40.0 g) × 1,000 g = 70,000,000 J

Therefore;

1 kg of methane produces 70,000,000 J = 70 MJ of energy

Therefore, energy produced from methane = 70 MJ/kg

Given that methane produces more than twice the amount of energy that

is produced from similar mass of isopropanol and more than one and half

times the amount of energy that is produced from the same mass of

paraffin, methane is a good choice as a fuel for energy

Learn more about the calorific value of fuels here:

https://brainly.com/question/24095281

Answer:

when you're diluting a solution, you're adding in more solvent, so the solute will maintain the same (D)

Answer:

[tex]\large \boxed{1.10 \times 10^{-3}\text{ mol/L}}[/tex]

Explanation:

1. Concentration of SO₄²⁻

SrSO₄(s) ⇌ Sr²⁺(aq) +SO₄²⁻(aq); Ksp = 3.44 × 10⁻⁷

                   0.0150          x

[tex]K_{sp} =\text{[Sr$^{2+}$][SO$_{4}^{2-}$]} = 0.0150x = 3.44 \times 10^{-7}\\x = \dfrac{3.44 \times 10^{-7}}{0.0150} = \mathbf{2.293 \times 10^{-5}} \textbf{ mol/L}[/tex]

2. Concentration of Pb²⁺

PbSO₄(s) ⇌ Pb²⁺(aq) + SO₄²⁻(aq); Ksp = 2.53 × 10⁻⁸

                        x          2.293 × 10⁻⁵

[tex]K_{sp} =\text{[Pb$^{2+}$][SO$_{4}^{2-}$]} = x \times 2.293 \times 10^{-5} = 2.53 \times 10^{-8}\\\\x = \dfrac{2.53 \times 10^{-8}}{2.293 \times 10^{-5}} = \mathbf{1.10 \times 10^{-3}} \textbf{ mol/L}\\\\\text{The concentration of Pb$^{2+}$ is $\large \boxed{\mathbf{1.10 \times 10^{-3}}\textbf{ mol/L}}$}[/tex]

Answer:

atagcca

Explanation:

t goes with a, and c goes with g

atagcca matches with

ta tcggt

Answer:

Flooded evaporator

Explanation:

It is flooded evaporator because the liquid refrigerant covers the entire heat transfer surface thereby operating with a low pressure receiver.

The receiver acts to separate gaseous and liquid refrigerant after the expansion valve and make sure there is a feed of 100% liquid refrigerant to the evaporator. This make it to have saturated liquid entering the evaporator and saturated liquid throughout the evaporator.

Answer:

- Aluminium sulfate Al2(SO4)3 dissociates in two aluminium ions and three sulfate ions, therefore, van't Hoff factor is 5 (incorrect).

Explanation:

Hello,

In this case, since the van't Hoff factor is related with the species that result from the ionization of a chemical compound, we can see that that

- Aluminium sulfate Al2(SO4)3 dissociates in two aluminium ions and three sulfate ions, therefore, van't Hoff factor is 5 (incorrect).

- Ammonium nitrate NH4NO3 dissociates in one ammonium ions and one nitrate ion, therefore, van't Hoff factor is 2 (correct).

- Sodium sulfate Na2SO4 dissociates in two sodium ions and one sulfate, therefore, van't Hoff factor is 3 (correct).

- Sucrose is not ionized, therefore, van't Hoff factor is 1 (correct).

Best regards.

Answer:

c is answwe

Explanation:

none of these

The difference between voltaic and electrolytic cells is that voltaic cells generate electricity through a spontaneous reaction while electrolytic cells absorb electricity to drive a non-spontaneous reaction. option A is correct.

Voltaic cells are spontaneous chemical reaction happens at which results in the generation or production of electrical energy or electricity. voltaic cell are made on basis on with modern-day batteries.

Electrolytic cells are the cells which do not generate  electricity with the help of a chemical reaction, instead of it electrolytic cell creates a useful chemical reaction with the help of an externally applied potential or external applied energy difference.

Therefore, voltaic cells generate electricity through a spontaneous reaction while electrolytic cells absorb electricity to drive a non-spontaneous reaction. option A is correct.

Learn more about voltaic cells and electrolytic cells, here:

https://brainly.com/question/3718731

#SPJ5

Answer:

Yes

Explanation:

The balanced equation of the reaction is;

FeBr2 (aq) + Cl2 (g) → FeCl2 (aq) + Br2 (aq)

This reaction is possible because chlorine is more electronegative than bromine and can displace it from its salt.

In group seventeen, electro negativity decreases down the group. Hence as we move down the group, elements become less electronegative and can be displaced from their salt by more electronegative elements found earlier in the group.

Hence chlorine can displace bromine in FeBr2 to form FeCl2.

Answer:

Yes, because Cl2 has higher activity than Br2

Explanation:

Answer:

-31.72°F

Explanation:

(-35.4°C × 9/5) + 32 = -31.72°F

The average temperature at the South Pole In January is - 35.4 °C. This temperature in Fahrenheit is -31.72 °F

To convert Celsius to Fahrenheit, you can use the formula:

°F = (°C × 9/5) + 32

Let's calculate the temperature at the South Pole in degrees Fahrenheit:

°F = (-35.4 × 9/5) + 32

°F = (-63.72) + 32

°F = -31.72

Rounding to three significant digits, the temperature at the South Pole in degrees Fahrenheit is approximately -31.7 °F. The negative sign indicates that the temperature is below the freezing point in both Celsius and Fahrenheit scales. The South Pole experiences freezing temperatures, as it is located near the Earth's southernmost point and experiences long periods of darkness during January.

Hence, the temperature in Fahrenheit is -31.7 °F.

Learn more about temperature here:

https://brainly.com/question/7510619

#SPJ 4

Answer:

It is a hydrogen bond but if I had to coose one of thee answers it is b. chemical bonding

Explanation:

Answer:

The coefficients are; 4, 0, 2, 2

Explanation:

The equation is given as;

HCl + O2 --> H2O + Cl2

Upon balancing the equation, we have;

4HCl + O2 --> 2H2O + 2Cl2

Answer:

Explanation:

Answer in attached file .

Answer:

d

Explanation:answer is d on edg 2020

Answer:

d. north pole on the top edge and south pole on the bottom edge

Explanation:

Answer:

Water when it freezes into ice

Explanation:

Most liquids expand when heated and contract when cooled, water behaves in an anomalous fashion. Water rather expands when cooled and contracts when heated.

Water usually contracts on cooling from any temperature until 4°C, after 4°C, the water begins to expand rapidly. Hence water has its least volume at 4°C and increases rapidly afterwards.

Thus the largest volume change for water occurs during freezing since it expands when cooled.

Answer:

c

Explanation:

it takes 10,000 years to just reduce down the decay

Answer:

[tex]Kp=5.14[/tex]

Explanation:

Hello,

In this case, the undergoing chemical reaction is:

[tex]N_2+3H_2\rightarrow 2NH_3[/tex]

Thus, the equilibrium expression is written as:

[tex]Kp=\frac{p_{NH_3}^2}{p_{N_2}p_{H_2}^3}[/tex]

And in terms of the reaction extent:

[tex]Kp=\frac{(2x)^2}{(10-x)(10-3x)^3}[/tex]

Thus, from the equilibrium pressure of ammonia we can compute the reaction extent:

[tex]p_{NH_3}=2x=6.0 atm\\\\x=3.0atm[/tex]

Therefore, the equilibrium constant turns out:

[tex]Kp=\frac{(2*3.0)^2}{(10.0-3.0)(10.0-3*3.0)^3}\\\\Kp=5.14[/tex]

Regards.