Copper mass percentage in the sample = 32%, Nitrogen dioxide is a gas generated by several metal-acid interactions that has some intriguing health consequences.
Nitrogen dioxide is a hazardous dark gas that causes respiratory issues. It is frequently created by high-temperature combustion in automobile engines. During rush hour in several cities in the 1970s, this pollution would pile up, causing public health problems.
As a result, several nations began implementing regulations requiring the installation of catalytic converters on automotive exhaust systems, which break down nitrogen dioxide into atmospheric nitrogen and oxygen.
Equation of the reaction producing Cu(NO₃) is given below:
Cu(s)+ 4HNO₃(aq) ---> Cu(NO₃)(aq) + 2NO₂(g) + 2H₂O(l)
From the equation of reaction, 1 mole of Cu(NO₃) is produced from 1 mole of copper. Therefore, 0.010 moles of Cu(NO₃) will be produced from 0.010 mole of copper.
Molar mass of copper = 64 g/mol
mass of copper = number of moles * molar mass
mass of copper = 0.01 mol * 64 g/mol = 0.64 g
Percentage by mass of copper in the 2.00 g sample = (0.64/2.00) * 100%
Percentage mass of copper in the sample = 32%
Learn more about Nitrogen dioxide
https://brainly.com/question/6840767
#SPJ4
Full Question ;
Each student in a class placed a 2.00-gram sample of a mixture of Cu and Al in a beaker and placed the beaker in a fume hood. The students slowly poured 15.0 mL of 15.8 M HNO3
(aq) into their beakers. The reaction between copper in the mixture and HNO3 is depicted above.
The students observed that a brown gas was released from the beakers and that solutions turned blue, indicating the formation of Cu2+. The solutions were then diluted with distilled water to known volumes. The students determined that the reaction produced 0.010 moles of Cu(NO3)2
. Based on the measurement, what was the percent of Cu by mass in the original 2.00-gram sample of the mixture?
A) 16%
B) 32%
C) 64%
D) 96%
1. What would happen to a balloon's volume, originally at 20 °C,
if you took the balloon outdoors in a temperature of 40 °C?
Assume that pressure is constant and the balloon does not
allow any gas to escape.
pop by nayeon is the answer fs
an amino acid chain a. is also known as a monomer. b. ultimately folds into a three-dimensional shape. c. becomes a triglyceride when folded. d. is held together by ionic bonds.
An amino acid chain is also known as a monomer ultimately folds into a three-dimensional shape.
An amino acid chain, also known as a monomer, is the building block of proteins. Proteins are made up of one or more amino acid chains that are linked together. These chains ultimately fold into a three-dimensional shape, which determines the protein's function. The specific sequence of amino acids in a chain, as well as the way the chain folds, are determined by the genetic code. The folding process is influenced by various factors such as temperature, pH, and the presence of other molecules. The three-dimensional shape of a protein is crucial for its function, as it determines how the protein interacts with other molecules in the cell.
To know more about protein
https://brainly.com/question/29776206
#SPJ4
which phase change occurs when steam is cooled to 100°c?
What is 22.4 liters at STP?
At STP(Standard temperature pressure) 1 mole of any gas occupies a volume of 22.4 L.
A mole of any gas occupies 22.4L at standard temperature and pressure (273K and 1atm).The molar volume of a gas is the volume of one mole of a gas at STP. Substitute the values n =1, R=0.82057 L atm mol-1K-1, T=273.15K and P= 1atm so after applying the formula V= nRT/P and putting these vaue we got the total volume is 22.4L.So at STP, 1 mole of any gas occupies a volume of 22.4L.
Learn more about mole here:
https://brainly.com/question/26416088
#SPJ4
.
Since plays do not have narrative (like short stories or novels), does that put more importance on having memorable dialogue and “well-thought-out” stage directions?
Answer:
This can be true. Since plays rely on dialogue and stage directions, It creates a lot of opportunities to have memorable dialogue, and "well-thought-out" stage directions. But, nevertheless, short stories and novels, can also have memorable dialogue, though they are most often narrative. So, yes, it is important for plays to have important dialogue and stage directions.
Explanation:
I hope this helps! Great to be of service to you!
Which of the following battery labels might be required to be placed on
packages containing lithium batteries?
(Select the correct answer.)
a. Alkaline battery hazard warning
b. UN3480, UN3481, UN3090, UN3091
c. Dangerous when wet
d. Fully regulated class 9 lithium-battery label
The danger of alkaline batteries UN3480, UN3481, UN3090, and UN3091 are hazardous when wet. Completely regulated class 9 lithium-ion battery label.
Which labels must be affixed to products containing lithium batteries?The danger of alkaline batteries UN3480, UN3481, UN3090, and UN3091 are hazardous when wet. Completely regulated class 9 lithium-ion battery label.Use a battery label with UN3090 if you are delivering lithium metal batteries as a stand-alone package (no additional items included). Use a battery label with UN3091 if you are transporting lithium metal batteries that are integrated into or packed with other equipment.Item description Packages using lithium ion or lithium metal batteries must bear the Lithium Battery Mark. Chemtrec's emergency contact details and UN3480 are preprinted on these markers.To learn more about lithium batteries refer to:
https://brainly.com/question/14344688
#SPJ1
Can silver and oxygen form an ionic bond?
Yes Silver and oxygen form an ionic bond as Ag+1 as cation silver reacts with anionic oxide 02-.
What is Silver?Silver is a chemical element with the atomic number 47 and the universally known symbol Ag (derived from Latin word Argentum, which is derived from the Proto-Indo-European "bright" or "white").Basically Silver is a transition metal which is soft, white, and lustrous as well as has the highest electrical, thermal, and reflectivity than any other metal.
There are three main ways to find the metal in the crust of the Earth: as an alloy with other metals like gold, as pure, unadulterated elemental silver (also termed as "native silver"), and in minerals like argentite and chlorargyrite. The process of refining copper, gold, lead, and zinc produces a significant amount of silver as a byproduct.
To know more about Silver Visit
https://brainly.com/question/6434391
#SPJ4
18.6 ml of 0.48 m naoh is used to titrate an unknown concentration of vinegar, what is the molarity of the acetic acid
To determine the molarity of the acetic acid in the vinegar, we can use the information provided about the volume and concentration of the NaOH solution used to titrate it.
First, we need to calculate the number of moles of NaOH used in the titration:
moles of NaOH = concentration x volume
moles of NaOH = 0.48 M x 0.0186 L = 0.00884 moles
Since acetic acid (CH3COOH) and sodium hydroxide (NaOH) react in a 1:1 ratio, the number of moles of acetic acid in the vinegar is also 0.00884 moles.
To calculate the molarity of the acetic acid, we need to divide the number of moles by the volume of the vinegar solution:
Molarity = moles/volume
Molarity = 0.00884 moles / (unknown volume)
We can then use the molarity of the acetic acid, to find the concentration of acetic acid in the vinegar. To find the unknown volume we have to use the formula of the reaction of acetic acid and NaOH.
Find more about Molarity here: https://brainly.com/question/8732513
#SPJ4
How is the body a system of multiple interacting subsystems?
Answer:
The human body is a complex system made up of multiple interacting subsystems, each with its own specific functions and roles. These subsystems include, but are not limited to:
The Skeletal system: It provides structural support for the body and protects vital organs.
The Muscular system: It allows for movement, generates heat and maintains posture.
The Nervous system: It controls and coordinates the body's responses to internal and external stimuli.
The Cardiovascular system: It circulates blood, oxygen and nutrients throughout the body.
The Respiratory system: It brings oxygen into the body and removes carbon dioxide.
The Digestive system: It breaks down food and absorbs nutrients.
The Urinary system: It eliminates waste products from the body.
The Endocrine system: It regulates hormones that control metabolism, growth, and development.
The Integumentary system: It protects the body from environmental insults and helps regulate body temperature.
The Immune system: It protects the body from pathogens and other foreign invaders.
All these subsystems are interconnected and dependent on one another to maintain homeostasis and keep the body functioning properly. For example, the cardiovascular system delivers oxygen and nutrients to the muscles, allowing them to contract and move. The nervous system controls the muscles' movements, allowing for fine motor control. The immune system defends the body against harmful microorganisms and foreign invaders, protecting the body from disease. And so on.
In summary, the human body is a system of multiple interacting subsystems, with each subsystem having a specific function that contributes to the overall functioning of the body as a whole.
In aqueous solutions, which type of bond or force has similar bond strength as ionic bond interactions?
a) Polar covalent bond
b) Hydrophobic clustering
c) Hydrogen bonds
d) Nonpolar covalent bond
Hydrogen bonds have similar bond strength as ionic bond interactions in aqueous solutions.
Ionic bonds are formed between positively and negatively charged ions and are characterized by a large difference in electronegativity between the atoms involved. The bond strength of ionic bonds is quite high. In aqueous solutions, hydrogen bonds also have a relatively high bond strength, as they are formed between a partially positively charged hydrogen atom and a partially negatively charged atom, such as oxygen or nitrogen. Hydrogen bonds are weaker than ionic bonds, but they are still relatively strong compared to other types of interactions such as dipole-dipole interactions or London dispersion forces. Hydrophobic clustering and nonpolar covalent bonds are not as strong as hydrogen or ionic bonds.
To know more about ionic bond
https://brainly.com/question/11527546
#SPJ4
Subatomic particles are particles that are smaller than an atom. There are many different types, but three of the most common are protons, neutrons, and electrons. Protons and neutrons are found in the nucleus of atoms.
Protons and neutrons are the subatomic particles that can be found in the oxygen atoms' nuclei.
An electron is a negatively charged subatomic particle that can be either bonded to or free from an atom. Electrons, proton, and neutron make form an atom's nucleus. The electron is a fundamental particle and is not composed of anything. Since electrons are present in nature freely and are made up of atoms, this describes their nature as being free. The primary duty of an electron is to serve as a negatively charged atom component. The major source of current conductivity is the electron, and both the number of electrons and the atomic number of an element are always the same or equal. Although there is no such thing as an electron, it has a mass of 9 10–31.
Learn more about The electron here:
https://brainly.com/question/19206266
#SPJ4
How many phosphite polyatomic ions do you have in 0.887 moles of iron(II) phosphite.
We have about 1.1 * 10^24 ions phosphite polyatomic ions in the iron(II) phosphite.
What is the number of moles?We know that the number of moles can be used to determine the amount of substance that is present in the system. We are dealing with the compound that is called iron(II) phosphite here.
In this compound there are two moles of the phosphite ion and three moles of the iron II ion and this is what we would use for the calculation.
Number of phosphite polyatomic ions = 2 * 6.02 * 10^23 * 0.887 moles
= 1.1 * 10^24 ions
Learn more about ions:https://brainly.com/question/29183072
#SPJ1
What is reduction reaction in simple words?
Reduction is a half-reaction in which a chemical species reduces its oxidation number by gaining electrons. Reduction is the gain of electrons or a decrease in the oxidation state of a chemical or atoms within it.
Definition of Reduction ReactionA reduction reaction is a reaction when an atom experiences a decrease in its oxidation number. It can be said that a reduction reaction is a reaction when a substance loses oxygen. Examples of redox reactions in everyday life are rusting, combustion, decay, photosynthesis and metabolism.
Many things can be done with reduction events, for example dissolving nitric acid for raw materials for the chemical industry or agricultural fertilizers, testing for sulfate content in salt, avoiding seawater contamination in the process of cyanidation of gold minerals, and the chemical element arsenic.
Learn more about reduction at https://brainly.com/question/28813812.
#SPJ4
1. what is the molar solubility in water of ag2cro4 ? (the ksp for ag2cro4 is 8 x 10-12.) (a) 8 x 10-12 m (b) 2 x 10-12 m (c) (d) (e)
The molar solubility in water of Ag₂CrO₄ is ∛ 2x 10⁻¹². The correct answer is E.
Solubility is the measure of the degree to which a substance gets dissolved in a solvent to become a solution.
The formula for determination of molar solubity is
Ksp=[A⁺]ᵃ[B⁻]ᵇ
where
Ksp = solubility product constant
[A⁺] = cation in an aqueous solution
[B⁻] = anion in an aqueous solution
a, b = relative concentrations of a and b
Data are provided as follows:
Ksp for Ag₂CrO₄ is 8 x 10⁻¹²
The solubility of silver chromate would be just half that of the Ag+ concentration.
We express Ag2CrO4's solubility as S mol L⁻¹.
Then for a saturated solution, we have
[Ag⁺]=2S
[CrO₂⁴⁻]=S
The stoichiometry of the dissolving reaction determines the relationship between the solubility and the solubility product constant.
(2S)²(S)=4S³ = 8 * 10⁻¹²
S=∛ (2*10⁻¹²)
S= 1.26 * 10⁻⁴ M
2S = 2.52 * 10⁻⁴ M
Therefore the molar solubility in water of Ag₂CrO₄ is 2.52 * 10⁻⁴ M .
Your question is incomplete but most probably your full question attached below
To know more about Solubility
brainly.com/question/8591226
#SPJ4
a substance formed chemically by a fixed ratio of elements is a
A substance formed chemically by a fixed ratio of elements is a compound.
A compound is a substance formed by the chemical combination of two or more elements in a fixed ratio by weight. The elements in a compound are chemically bonded together and have unique properties that are different from the properties of its individual elements. Compounds can be represented by chemical formulas, which specify the ratio of atoms of each element present in the compound. Examples of compounds include water (H2O), carbon dioxide (CO2), and table salt (NaCl).
Learn more about compound here:
https://brainly.com/question/13516179
#SPJ4
Why is the third ionization energy of magnesium so much greater than the second ionization energy?
Answer:
The second ionization energy of Mg is larger than the first because it always takes more energy to remove an electron from a positively charged ion than from a neutral atom. The third ionization energy of magnesium is enormous, however, because the Mg2+ ion has a filled-shell electron configuration.
Explanation:
MAKE SURE TO REPHRASE
Calculate the efficiency of a simple 5 pulley machine that pulls bucket of 50 liters of water with an effort of 250N.
Answer:
Explanation:
A machine's efficiency is a measure of how much of its input energy is turned into usable output. The following formula is used to calculate a machine's efficiency:
(Output Work / Input Work) x 100% = Efficiency
The output work in this situation is the work done by the machine to draw the bucket of water, and the input work is the effort exerted by the person running the machine.
Work produced = Force x Distance
Distance = the distance traveled by the bucket = 50 liters
As a result, the output work = 250 N x 50 L = 12500 J. (Joules)
Work input = effort x distance
Distance = the distance over which effort is exerted = 5 pulleys
So the input work is 250 N multiplied by 5 pulleys is 1250 N.
(Output Work / Input Work) x 100% = Efficiency
(12500 J / 1250 J) x 100% = Efficiency
10 × 100% Equals 1000% efficiency
It should be noted that the efficiency is expressed as a percentage and should be less than 100%. However, in this example, the answer is 1000%, which is implausible.
This might be because of an error in the input data or a misunderstanding of the situation.
A sample of aluminum (c = 0. 900 J/gºC) is heated from 20. 8°C to 38. 7 °C using 3,750 ) of energy. What is the mass of the aluminum sample?
A sample of aluminum (c = 0. 900 J/goC) is heated using 3,750) of energy from 20. 8°C to 38. 7°C. mass of the aluminum sample is 153.4 g.
We can use the equation Q = mcΔT, where Q is the heat energy, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature, to find the mass of the aluminum sample.
Given:
c = 0.900 J/gºC
Initial temperature = 20.8 °C
Final temperature = 38.7 °C
Q = 3,750 J
To use the equation, we need to convert the temperature to Kelvins.ΔT = 38.7 - 20.8 = 17.9 °C
T₁ = 20.8 + 273 = 293.8 K
T₂ = 38.7 + 273 = 311.7 K
ΔT = T₂ - T₁ = 311.7 - 293.8 = 17.9 K
Now we can plug in the values and solve for m:
Q = mcΔT
m = Q / cΔT
m = 3750 / (0.900 x 17.9)
m = 153.4 g
So the mass of the aluminum sample is 153.4 g.
Learn more about specific heat capacity here:
https://brainly.com/question/29766819
#SPJ4
you have 125 g of a certain seasoning and are told that it contains 68.0 g of salt. what is the percentage of salt by mass in this seasoning?
The percentage of salt by mass in this seasoning will be 54.4%
A percentage is a number or ratio expressed as a fraction of 100.
The formula to calculate the percentage is iven below
Percentage = (Original number/Another number) x 100
so according to the question
seasoning = 125g
salt = 68g
% of salt by mass= ?
The formula will be
% = (salt /mass) × 100
By putting the values in the mentioned formula we will get the result as follows
% = (68 / 125)×100
%= 0.544 ×100
%= 54.4%
So the percentage of salt by mass in this seasoning is 54.4%.
To look more about percentage click here
brainly.com/question/29306119
#SPJ4
What happens when h2 and O2 combine?
When hydrogen (H2) and oxygen (O2) combine, they form water (H2O) and release energy in the form of heat and light, a process known as combustion. This is represented chemically as follows: 2H2 + O2 -> 2H2O + energy (heat and light).
Hydrogen (H2) is a colorless, odorless, and flammable gas that is the lightest element on the periodic table. It is the most abundant element in the universe and can be found on Earth in both gaseous and liquid form. Oxygen (O2) is a colorless and odorless gas that makes up about 21% of the Earth's atmosphere. It is necessary for the survival of most living organisms, as it is used in the process of respiration.Combustion is a chemical process in which a substance reacts with oxygen to produce energy in the form of heat and light.The process of combustion can be exothermic, meaning it releases heat, or endothermic, meaning it absorbs heat. The combustion of hydrogen and oxygen is an exothermic reaction, which releases a large amount of energy.
Learn more about Combustion here:
https://brainly.com/question/15117038
#SPJ4
In the extraction of titanium from its ore, the final stage involves the reaction between titanium(IV) chloride, TiCl4,
and sodium.
TiCl4 + 4Na →→ Ti + 4NaCl
Calculate the maximum mass of titanium that can be obtained from 500 tonnes of titanium(IV) chloride in this
reaction.
(relative atomic mass: Ti = 48
relative formula mass of TiCl4 = 190)
(2)
The maximum mass of titanium that can be obtained from 500 tonnes of titanium(IV) chloride in this reaction is 24,000 tonnes.
The maximum mass of titanium500 tonnes x (1000 kg/tonne) x (190 g/mole TiCl4) = 95 x 10^6 g TiCl495 x 10^6 g TiCl4 x (48 g Ti/190 g TiCl4) = 24.7 x 10^6 g Ti.Therefore, the maximum mass of titanium that can be obtained from 500 tonnes of titanium(IV) chloride is 24.7 x 10^6 g.This can be calculated using the stoichiometry of the equation. First, calculate the number of moles of titanium(IV) chloride present in 500 tonnes.This is done by dividing the mass by the relative formula mass of the compound, giving 26,316 moles of TiCl4. The equation of the reaction shows that for every 1 mole of titanium chloride, 4 moles of sodium are required to produce 1 mole of titanium.Therefore, there are 104,264 moles of sodium required for the reaction. Since the mass of sodium is the same as its molar quantity, the mass of sodium required is 104,264 tonnes. Since the ratio of titanium produced to titanium chloride used is 1:1, the mass of titanium produced is 26,316 tonnes.This is equal to 24,000 tonnes when converted to kilograms. This process is known as stoichiometric calculations.To learn more about The maximum mass of titanium refer to:
https://brainly.com/question/30004075
#SPJ1
What amount of heat, in KJ, would be involved in condensing 12. 9 g of ch3OH ?(hvap=38. 0 kj/mol
The amount of the heat in kJ , would be involved in the condensing 12.9v g of the CH₃OH is the 15.2 kJ.
Given that :
The mass of the CH₃OH = 12.9 g
The ΔH = 38 kJ/mol
The molar mass = 32 g/mol
The number of the moles = mass / molar mass
The number of the mole = 12.9 / 32
= 0.403 mol
The number of the moles is 0.403 mol
The amount of the heat is given as :
Q = n ΔH
Q = 0.403 × 38
Q = 15.2 kJ.
Thus, the amount of the heat is 15.2 kJ.
To learn more about heat here
https://brainly.com/question/21655944
#SPJ4
How many moles of HCI can be produced from 0.424 gram of SOCI₂?
SOCI2 + H₂O → SO₂ + 2HCI
700 moles
0.00700 moles
0.0038 moles
0.040 moles
Mole of HCI = 0.00700 moles
what is moles?The mole is the amount of substance of a system which contains as many elementary entities as there are atoms in 0.012 kilogram of carbon 12; its symbol is “mol”A mole is a very important unit of measurement that chemists use. A mole of something means you have 602,214,076,000,000,000,000,000 of that thing, like how having a dozen eggs means you have twelve eggs. Chemists have to measure using moles for very small things like atoms, molecules, or other particles., a mole of water contains NA number of H2O molecules. However, each water molecule contains 2 hydrogen atoms and one oxygen atom. Therefore, one mole of H2O contains 2 moles of hydrogen and one mole of oxygenTo learn more about moles refers to:
brainly.com/question/15356425
#SPJ1
What prediction can you make about the relationship between the variables a pressure and temperature of a gas?
The Charles law prediction can you make about the relationship between the variables a pressure and temperature of a gas.
What is Charles law ?
According to Charles' law, an ideal gas's volume under constant pressure increases directly as the absolute temperature does. As long as the pressure placed on a sample of a dry gas remains constant, the equation also stipulates that the Kelvin temperature and volume will be directly proportional.
What is pressure ?
The SI unit for pressure, the pascal (Pa), which equals one newton per square metre (N/m2) of surface area, is the measure of pressure. An object's pressure is inversely proportional to its area under which it is being forced and is directly proportional to the force it generates.
Therefore, Charles law prediction can you make about the relationship between the variables a pressure and temperature of a gas.
Learn more about Charles law from the given link.
https://brainly.com/question/16133810
#SPJ1
Two types of spiral galaxies exist. A normal spiral galaxy is one kind. Which phrase best describes the second type of spiral galaxy?
Barred spiral galaxies have a bright linear feature called a bar that straddles the nucleus, with the arms unwinding from the ends of the bar.
This is one key difference from regular spiral galaxies that can describe a barred spiral galaxy efficiently.
Help what’s the answer?
The supplied solution will have a volume of 1.01 mi, or 0.00101 Liters.
How much is a liter?The metric unit of volume known as the liter is mostly used to measure liquids. Liters are denoted by the letters "L" or "l". Milliliters are the unit of measurement for smaller liquid amounts (mL). 1000 milliliters make up one liter.
What is equivalent to 1 liter?The liter is a metric unit of volume that can be written with the letters L or l in the SI. Its American English equivalent is the liter. It is equivalent to one cubic decimeter (dm3), one thousand cubic centimeters (cm3), or one thousandth of a cubic metre (m3).
To know more about solution visit:-
https://brainly.com/question/7932885
#SPJ1
Select the ΔH values associated with the dissolution of lithium chloride that are exothermic.
Check all that apply.
A. ΔH1: energy associated with the separation of water molecules
B. ΔH2: energy associated with the separation of LiCl ions
C. ΔH3: energy associated with the formation of water-ion interactions
D. ΔHsoln: the enthalpy of solution
B. ΔH2: energy associated with the separation of LiCl ions
C. ΔH3: energy associated with the formation of water-ion interactions
D. ΔHsoln: the enthalpy of solution
Options A and B refer to the enthalpy change associated with the separation of the ions of lithium chloride and the formation of water-ion interactions, both of them are endothermic processes and would require energy to be added to the system.
Option D refers to the enthalpy of solution which is the enthalpy change associated with the dissolution of a substance in a solvent, and it is exothermic when the enthalpy change is negative.
So, options B, C and D are exothermic and need to be selected.
Learn more about Enthalpy Change here: https://brainly.com/question/29556033
#SPJ4
Options C and D are associated with the dissolution of lithium chloride which is exothermic.
C. ΔH3: energy associated with the formation of water-ion interactions
D. ΔHsoln: the enthalpy of solution
The dissolution of a solid in a liquid is an exothermic process, it means that heat is released. So, the enthalpy change (ΔH) for the dissolution of lithium chloride will be negative.
ΔH3 represents the energy associated with the formation of water-ion interactions and ΔHsoln represents the enthalpy of the solution, which is the overall enthalpy change for the dissolution process.
Both of these values will be negative for an exothermic process.
ΔH1 and ΔH2 represent the energy associated with the separation of water molecules and LiCl ions respectively, which are not relevant to the dissolution process.
To learn more about the exothermic process:
https://brainly.com/question/2924714
#SPJ4
A is a solution of HCL containing 7.30g/dm3.B is a solution ofX2CO3 containing 10.6g/dm3.assume that average volume of acid is 2.81cm3 and the volume of base is 25.00cm3.from your result and information .calculate (I)concentration of A in mol/dm3(ii)concentration of B in mol/dm3 (H-1.00 cl-35.5 O-16.00 C-12.0
Answer:
To calculate the concentration of A in mol/dm3, we need to know the molar mass of hydrochloric acid. Since the molar mass of hydrochloric acid is 36.46 g/mol, we can calculate the concentration of A by dividing the mass of hydrochloric acid, 7.30g/dm3, by its molar mass, 36.46 g/mol. This gives us a concentration of 0.2 mol/dm3 for A.
To calculate the concentration of B in mol/dm3, we need to know the molar masses of the elements in X2CO3. Since the molar masses of hydrogen, chlorine, oxygen, and carbon are 1.00 g/mol, 35.5 g/mol, 16.00 g/mol, and 12.0 g/mol, respectively, we can calculate the molar mass of X2CO3 as (21.00) + (135.5) + (316.00) + (112.0) = 90.90 g/mol. We can then calculate the concentration of B by dividing the mass of X2CO3, 10.6g/dm3, by its
give me brainiest
How many atoms are present in ch4?
Methane's chemical structure is CH4. Four hydrogen atoms and one carbon atom make up this formula. Methane has five atoms in total.
We can infer from the structural formula of methane (CH4) that this compound molecule has a total of 5 atoms: 1 carbon atom surrounded by 4 hydrogen atoms.
The simplest alkane without a doubt, methane is one of the most basic organic molecules.
Four additional atoms or molecules must be bonded to the carbon atom because of its quadro-valency.
As a result, each basic alkane methane molecule contains 4 hydrogen atoms bonded to 1 carbon atom.
Learn more about CH4 from here:
https://brainly.com/question/27926556
#SPJ4
Ethanol has a density that is about 0. 8 g/mL. This means that a certain volume of ethanol will ________
Ethanol has a density of approximately 0.8 g/mL, which means that for a given volume of ethanol, the mass of the ethanol will be 0.8 times the volume.
For example, if you have 100 mL of ethanol, then the mass of the ethanol would be 80 g. This density is slightly lower than the density of water, which is 1 g/mL, so a volume of ethanol will be slightly lighter than an equal volume of water.
Ethanol is a relatively volatile substance, meaning that it evaporates easily. At normal temperatures and pressures, it will evaporate at a faster rate than water. This means that if you have a certain volume of ethanol, some of it will evaporate over time, reducing the total mass of ethanol. In addition, ethanol has a lower boiling point than water, so it will evaporate more quickly at higher temperatures.
Ethanol has many uses, such as in fuel, as a solvent, and as an ingredient in alcoholic beverages. It is important to be aware of its density when measuring and using ethanol so that you can accurately measure and use the correct amount of ethanol for the desired purpose.
Learn more about ethanol:
https://brainly.com/question/28490764
#SPJ4