Find the minor measurement of the vernier scale by taking 49, 1mm divisions of the main scale and dividing it into 50 vernier divisions.​

Answers

Answer 1
♨ANSWER♥

length of V-50 = 49mm

length of V-1 = 49/50mm

= 0.98mm

so,

minor measurement = (M-1) - (V-1)

= 1mm -0.98mm

= 0.02mm

☆ Therefore,

The minor measurement of the vernier scale is 0.02mm.

...hope this helps...

_♡_mashi_♡_


Related Questions

A 25. 00 ml sample of acetic acid containing phenolphthalein indicator is titrated with 0. 1067 m naoh. The solution changes color after 30. 07 ml naoh has been added. What is the concentration of the acetic acid before titration?.

Answers

The concentration of the acetic acid:

The concentration of the acetic acid before titration is 0.128M

Reaction of phenolphthalein with NaOH:

The sodium hydroxide will start interacting with phenolphthalein as soon as enough sodium hydroxide has been added to the acetic acid such that there is no longer any unreacted acetic acid. Pink solution is produced when phenolphthalein and sodium hydroxide combine.

Calculation:

The balanced equation:

CH₃COOH + NaOH ⇒ CH₃COONa + H₂O

Given:

Quantity of NaOH = 0.1067 M

Volume of NaOH = 30.07 ml

                             = 30.07 / 1000

                             = 0.03007 L

For weak acid and strong base titration =  Moles of acetic acid =  moles of NaOH

Moles of NaOH = concentration X volume

0.1067 X 0.03007 = 0.0032

Thus, moles of acetic acid  = 0.0032mole,

By employing the formula,

Concentration = Moles/Volume

                         = 0.0032/0.025

                         = 0.128M

Learn more about the concentration of acetic acid here,

https://brainly.com/question/15065009

#SPJ4

What force is large enough to change the direction of a planet?
A. Gravity
B. Friction
C.Tension
D. Air Resistance

Answers

Answer:

Gravity

Explanation:

The more massive the object is, the higher the gravity

Hence, a massive star, like our sun, has enough gravity to pull on planets and keeping them in orbit

The holding coil on a hydromatic propeller feathering button switch holds a solenoid relay closed that applies power to the propeller?

Answers

An electric propeller is powered by a solenoid relay that is kept closed by the holding coil on a hydromatic propeller feathering button switch. It is a kind of feathering pump motor.

What does it mean to feather an engine?

If an engine needs to be turned off, the feather is used. The blades are rotated during feathering such that the extent to which a leader is virtually pointing in the flying direction. The propeller's aerodynamic forces cause a low drag state in this position. It is composed of a solenoid relay.

What is meant by solenoid relay?

A form of relay designed to wirelessly change a stronger current is called a solenoid. A coil is utilized to create an electromagnetic environment when power is transferred through it, similarly to the tiny motorized cube relays, that efficiently open or shut the circuit.

Learn more about solenoids here:

https://brainly.com/question/15504705

#SPJ1

Use Hooke's Law to determine the variable force in the spring problem. A force of 7 pounds compresses a 15-inch spring a total of 3 inches. How much work is done in compressing the spring 7 inches

Answers

Work done in compressing spring =  40.833


It simply needs a three-inch compression by applying a compressive force to a 15-inch long spring. we know that  F(x)=kx. To act in displacement X and the poles' values cannot be substituted. Consequently, there will be 4. The spring constant K is therefore equal to 5, so. Three fit within this slot. We consequently derive the compressing spring constant K from this. , which is 5, 3. Now change this formula to include the value of the compressing spring constant. Four f will therefore equal 5.3 x and vice versa. Integration of four factors equals W.

In order to ensure the limit and further all of this, we currently have the range 0–7. Thus, this compressing spring task is completed. W is equal to  40.833

To learn more about Compressing spring please visit
https://brainly.com/question/14770700
#SPJ1

Air that is not saturated will cool or heat at a rate of __________________ as it rises or descends, respectively

Answers

Air that is not saturated will cool or heat at a rate of 10 degrees C/1000 meters as it rises or descends, respectively

The rate of the change in temperature which is observed while moving upward in the earth's atmosphere with elevation. It can be positive, negative and zero when the temperature decreases, increases or is constant with the elevation respectively.

For the atmosphere, the drop in temperature of rising air that is  unsaturated air is about 10 degrees C/1000 meters (5.5 °F per 1000 feet) altitude.

That means if a there occur a rise of 1000 m , then the temperature of that thing will decrease to 10 degrees. Every 10°C of temperature from the given temperature will decrease at every rise of 1000 m .Air that is not saturated will cool or heat at a rate of 10 degrees C/1000 meters as it rises or descends, respectively

To learn more about unsaturated air here

https://brainly.com/question/13434971?referrer=searchResults

#SPJ4

A carnival ferris wheel has a 15-m radius and completes five turns about its horizontal axis every minute. What is the acceleration of a passenger at his lowest point during the ride?.

Answers

The acceleration of the person is 4.108 m/s^2.

What is acceleration?

The acceleration is the rate of change in the velocity in a unit of time.

Angular velocity: The change in angular displacement in a unit of time is called angular velocity.

Tangential velocity: The tangential velocity can be defined as the velocity of an object which is perpendicular to the radius in the rotational motion.

The relation between angular velocity ω, tangential velocity v, and radius r from the axis when the radius is perpendicular to the tangential velocity is,

v=ω*r

Given r=15 m, and ω=5 turns/minutes, substitute these values in the above formula.

Note: 1 turn/minute = 2π/60 rad/s.

v=(5 turns/minutes)*15 m

v=(5*2π/60 rad/s)* 15 m

v=7.85 m/s

Since the motion is circular, and the person is at the lowest point of the wheel, so the acceleration due to gravity will have no effect as it is perpendicular to tangential velocity here. The acceleration a for rotational motion is given by,

a=v^2/r

Substitute v=7.85 m/s, and r=15 m in this equation and solve it.

a=(2.094)^2/(15)

a=4.108 m/s^2

Learn more about acceleration here:

https://brainly.com/question/12550364

#SPJ4

The international Space Station (ISS) orbits the Earth once every 90 mins at an altitude of 409 km. How high would it have to be in order to be to be in geosynchronous orbit

Answers

It would have to be 36,719 Km high in order to be to be in geosynchronous orbit.

To find the answer, we need to know about the third law of Kepler.

What's the Kepler's third law?It states that the square of the time period of orbiting planet or satellite is directly proportional to the cube of the radius of the orbit.Mathematically, T²∝a³What's the radius of geosynchronous orbit, if the time period and altitude of ISS are 90 minutes and 409 km respectively?The time period of geosynchronous orbit is 24 hours or 1440 minutes.As the Earth's radius is 6371 Km, so radius of the ISS orbit= 6371km + 409 km = 6780km. If T1 and T2 are time period of geosynchronous orbit and ISS orbit respectively, a1 and a2 are radius of geosynchronous orbit and ISS orbit, as per third law of Kepler, (T1/T2)² = (a1/a2)³a1= (T1/T2)⅔×a2

           = (1440/90)⅔×6780

           = 43,090 km

Altitude of geosynchronous orbit = 43,090 - 6371= 36,719 km

Thus, we can conclude that the altitude of geosynchronous orbit is 36,719km.

Learn more about the Kepler's third law here:

brainly.com/question/16705471

#SPJ4

   

A car is traveling north on a straight road at 20 mys and a drone is flying east at 6 mys at an elevation of 25 m. At one instant the drone passes directly over the car. How fast is the distance between the drone and the car changing 5 seconds later

Answers

The distance between the drone and the car will be 20,3 m/s.

What is average velocity?

In physics, velocity is a quantity that identifies the displacement of a body in a given time. Thus, the average velocity measures in an average time interval, the speed of displacement of a body.

With that being said, Suppose that both car and drone starts from 0 and move towards north and east, respectively. So, after T time:

Distance covered by the car, [tex]y = 20.T.m[/tex]

Distance cover by the drone, [tex]x = 6.T.m[/tex]

Considering the elevations of 25m, the actual distance between them at any T instant:

[tex]A = \sqrt{(20T)^{2} } + (6T)^{2} +25^{2}[/tex]

Speed, [tex]V = \frac{ds}{dt} = \frac{[2(20T).20+2(6T).8}{\sqrt{(20.5)^{2}+(6T)^{2}+25^{2} } }[/tex]

[tex]V = 20,3 m/s[/tex]

So, the distance between the drone and the car will be 20,3 m/s.

See more about mechanics at: brainly.com/question/23561157

#SPJ1

Answer:

20.3 m/s

Explanation:

dx / dt = 20 m / s

dy / dt = 6 m / s

dj / dt = ? when t = 5 s

The trick here is that the drone is flying at an elevation of 25 m.

x^2 + y^2 = j^2

Implicit Differentiation: 2x dx / dt + 2y dy / dt = 2j dj / dt

We are not given x and y values. Solve by d = vt. Distance = velocity * time

x = 20(5) = 100 m

y = 6 (5) = 30 m

Now we need to solve for j, but we need to solve the hypotenuse z of the right triangle first.

z = [tex]\sqrt{(100)^2 + (30)^2[/tex] ≈ 104.4 m

A mistake occurs when z is used as the distance between the drone and the car. Visualize the distance between the drone and the car as the right triangle where j is the hypotenuse, z is the x value, and 25 m is the y value.

j = [tex]\sqrt{(104.4)^2+(25)^2[/tex] ≈ 107.35 m

dj / dt = 1 / 2(107.35)((4000 + 360)) ≈ 20.3 m/s

If a truck in front of your car begins to turn left, but its right turn signals are flashing, it is most likely that the truck driver __________________.

Answers

If a truck in front of your car begins to turn left, but its right turn signals are flashing, it is most likely that the truck driver is making a mistake or he is not conscious of his driving

What is traffic light?

Traffic light can simply be defined as a set of automatically operated coloured lights such as red, amber, and green, for controlling traffic at road junctions, pedestrian crossings and roundabouts.

Below are the meaning of some traffic light colours:

Red means stop or dangerGreen means go. I.e it is safe to proceedYellow means move with caution or get ready to stop

So therefore, if a truck in front of your car begins to turn left, but its right turn signals are flashing, it is most likely that the truck driver is making a mistake

Learn more about traffic light:

https://brainly.com/question/24759367

#SPJ1

Which planet has the most extreme temperature difference between day and night?

Answers

Answer:

Explanation:

Mercury, the first planet from the Sun, endures drastic temperature changes from day to night. During the day, the planet is incredibly near to the Sun, with temperatures reaching 430°C.

As the volume of a chamber decreases, the pressure inside the chamber ____________ . as the volume increases, the pressure ____________ .

Answers

Answer: Increases, decreases

Explanation:

As the volume of a chamber decreases the pressure inside the chamber increases. As the volume increases the pressure decreases

Two 5000-kg passenger cars roll without friction (one at 1 m/s, the other at 2 m/s) toward one another on a level track. They collide, couple, and roll away together with a combined momentum of

Answers

The combined momentum of the passengers is 5000 kgm/s.

Combined momentum of the passenger

The combined momentum of the passengers is calculated as follows;

P = mv1 + mv2

where;

m is mass of the passengersv1 is velocity of the first passengerv2 is velocity of the second passenger

P = m(v1 + v2)

P = 5000(-1 + 2)

P = 5000 kgm/s

Thus, the combined momentum of the passengers is 5000 kgm/s.

Learn more about momentum here: https://brainly.com/question/7538238

#SPJ1

describe how you would connect a voltmeter to measure the potential difference across a resistor and an ammeter to measure the current through a resistor

Answers

A voltmeter needs to be connected in parallel to the two sites in order to measure the potential difference between them.

What is a voltmeter?The electrical potential difference between two locations in an electric circuit is measured using a voltmeter.The potential difference between two ends of a current-carrying conductor is measured using a voltmeter.On a scale that is typically measured in volts, millivolts (0.001 volts), or kilovolts, a voltmeter primarily monitors the voltage of direct or alternating electric current (1,000 volts).Numerous voltmeters are digital and display readings as numbers.How is a voltmeter connected?A galvanometer with high resistance is a voltmeter.Any portion of an electrical circuit can be measured.Due to its high resistance, it is linked in parallel so that it does not impact the circuit's overall net resistance and does not draw any current by itself.A device's voltage is measured by a voltmeter connected in parallel, and its current is measured by an ammeter connected in series.

Learn more about voltmeters here

https://brainly.com/question/83321

#SPJ4

with the enterprise of video-gaming technology growing every year, researchers have ercently become interested in the effects of violent video games

Answers

Meta-analysis indicates that violent video games increase aggressive thoughts, aggressive affect, and aggressive behavior.

What are the effects of Violent video games ?

Children who play violent video games have increased aggressive cognitions, aggressive behavior, psychological arousal as well as antisocial behavior.

Furthermore, exposure to violence in the games leads to desensitization- “a reduction in emotion-related physiological reactivity to real violence”

The downside of video games is that the more time children and teens spend playing violent video games the more likely they are to display aggressive behavior.

Learn more about Violent video games here:

https://brainly.com/question/27985026

#SPJ4

Why is it so much easier to determine the length of the day on mars than on venus?

Answers

The thick cloud cover of Venus makes it difficulty in visibility  because of impenetrable in visible light which has made it tough for astronomers to measure the length of the planet's day . Whereas Mars have clear atmosphere which do not hinder visibility

The most important reason of why is it difficult to measure the length of the day on Venus is tougher than in mars is that Mars' atmosphere is generally clear because of which their is no visibility issue on mars but due to the thick cloud covering of Venus makes it impenetrable in visible light , due which visibility is not that clear  and it become tough to observe the length of the day on Venus.

Mars is much larger than Venus in size which makes easier to observe

To learn more about Mars' atmosphere

https://brainly.com/question/25880013?referrer=searchResults

#SPJ4

What is constant in the horizontal direction for a projectile?

Answers

Answer:

initial velocity is the constant in horizontal projectile

A 350-g mass is attached to a spring whose spring constant is 64 N/m. Its maximum acceleration is 5.3 m/s2. What is the frequency of its oscillations?

Answers

The frequency of oscillation is 2.153 Hz

What is the frequency of spring?

Spring Frequency is the natural frequency of spring with a weight at the lower end. Spring is fixed from the upper end and the lower end is free.

For the mass-spring system in this problem,

The Frequency of spring is calculated with the equation:

[tex]f = \frac{1}{2\pi } \sqrt{\frac{k}{m} }[/tex]

Where,

f = frequency of spring

k = spring constant = 64 N/m

m = mass attached to spring = 350g = 0.350 kg

a = maximum acceleration = 5.3 m/s^2

Substituting the values in the equation,

[tex]f = \frac{1}{2\pi } \sqrt{\frac{64}{0.350} }[/tex]

[tex]f = \frac{1}{2\pi } ( 13.522)[/tex]

[tex]f = 2.1535 Hz[/tex]

Hence,

The frequency of oscillation is 2.153 Hz

Learn more about frequency here:

https://brainly.com/question/13978015

#SPJ4

A hydraulic system contains 3 pistons. The input piston has an area of 0.625 in2, one of the output pistons ( piston A ) has an unknown area and the other piston ( Output Piston ) has a diameter of 3.75 inches. If system pressure is 1,440 psi, and Piston A is supporting 20,000 lb, what is the area of Piston A

Answers

The area of Piston A is 13.88 in^2

What is a hydraulic system?

The hydraulic system functions by using pressurized fluid.  The power of liquid fuel in hydraulics is significant and as a result, they are commonly used in heavy equipment.

Hydraulic system simply means a mechanical function that operates through the force of liquid pressure.

Here

A hydraulic system contains 3 pistons.

Pressure, P = 1440 psi

for piston A:

Area, A= 0.625 in^2

Force, F = 20,000 lb

We know that,

Force = Pressure x Area

F = P x A

Area ( piston A) = F / P

A = 20,000 / 1440

A = 13.88 in^2

Hence,

The area of Piston A is 13.88 in^2

Learn more about hydraulic system here:

https://brainly.com/question/27961071

#SPJ4

mechanical equivalent of heat Do the data for the second part of the experiment support or refute the second hypothesis

Answers

The data for the first part of the experiment support the first hypothesis. As the force applied to the cart increased, the acceleration of the cart increased. Since the increase in the applied force caused the increase in the cart's acceleration, force and acceleration are directly proportional to each other, which is in accordance with Newton's second law.

When we state something about the results on the basis whether the observed data supports the original hypothesis, we say that we are concluding the results.

What is the relationship between force and acceleration based on Newton's 2nd law?

Newton's second law of motion can be formally stated as follows: The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.

Learn more about Newton's second law of motion brainly.com/question/13447525

#SPJ4

Refer to the image. Calculate the magnitude of change in velocity of the cue ball.


The answer is 2.83 m/s. Please explain the step.

Answers

Answer:

If you add the 2 velocity vectors you get the velocity of the third vector which is the (change in) velocity of the cue ball after striking the cushion

V * 2 * cos 45 = 4 * cos 45 = 2.83 m/s

Would the numerical values of the thermal coefficients would have been the same if the temperatures had been measured in Fahrenheit instead of Celsius

Answers

The numerical values of the thermal coefficients would change if the temperatures had been measured in Fahrenheit instead of Celsius.

Why would the numerical values of thermal coefficients change if the temperature is measured in Fahrenheit instead of Celsius?The amount it expands is, of course, a property of the material and cannot be altered. When we use alternative units of measurement, though, we communicate this differently. It will therefore be 9/5 of its value in "per degree C" if it is stated as "per degree F".For example:Saying the speed of light is 299792458 m/s, or 186282.397 miles per second, is equivalent. The representation alters but not the speed of light.What is the Coefficient of thermal expansion?The rate at which a material expands as temperature rises is known as the coefficient of thermal expansion (CTE). The material is assumed to still be in its solid or fluid form as this coefficient is calculated at constant pressure and without a phase transition.A material will expand more in response to heat if its coefficient of thermal expansion is higher.

T o learn more about thermal coefficients visit:

https://brainly.com/question/15557568

#SPJ4

A substance has life of 40 years. In how many years will the substance disintegrate to 1/8 of its initial size

Answers

Answer:

5 years

Explanation:

[tex]\frac{1}{8}(40)\\\\= 5[/tex]

Differences between sublimation and condensation

Answers

The difference between sublimation and condensation is that

Sublimation is used to in a separation technique to separate sublime substance from a mixture while condensation is the

is the process where water vapor becomes liquid

What is separation technique?

This technique is used in chemistry to separate two or more constituents from a mixture

In conclusion, sublimation differs from condensation because sublimation is used to in a separation technique to separate sublime substance from a mixture while condensation is the

is the process where water vapor becomes liquid

Learn more about separation technique:

https://brainly.com/question/10862519

#SPJ1

if the force acting on a body of mass 40 kg is doubled . by how much will the acceleration change

Answers

The acceleration will be doubled because the force and the acceleration are directly proportional please make my answer the brainliest. Thanks :)

A small mailbag is released from a helicopter that is descending steadily at 1.53 m/s. (a) After 4.00 s, what is the speed of the mailbag? v = m/s (b) How far is it below the helicopter? d = m (c) What are your answers to parts (a) and (b) if the helicopter is rising steadily at 1.53 m/s?

Answers

Answer: A small mailbag is released from a helicopter that is descending steadily at 1.53 m/s. Then,

a) after 4s, the speed of the mailbox will be, 40.73m/s downwards.

b)78.4m downwards.

c) v=37.67m/s downward. and d=78.4m downward.

Explanation: To find the answer, we need to know more about the equations of uniformly accelerated motion.

What are the equations of uniformly accelerated motion?The equations of uniformly accelerated motion under gravity are,

                                [tex]v=u+at\\S=ut+\frac{1}{2}at^2\\ v^2-u^2=2aS\\S=\frac{v+u}{2}t[/tex]

How to solve the problem?a) speed of the mailbag after 4s,

            [tex]v=u+gt=-1.53-(9.8*4)=-40.73 m/s^2[/tex]

b) How far it is below the helicopter,

           [tex]d_1=ut+\frac{1}{2}gt^2=(-1.53*4)+\frac{-9.8*16}{2} =-84.52 m\\d_2=vt=-40.73*4=-162.92 m\\d=-162,92+84.52=-78.4m[/tex]

c) If the helicopter is rising steadily, then v and d will be,

                 [tex]v=u+gt=1.53-(9.8*4)=-37.67 m/s[/tex]

                 [tex]d_1=ut+\frac{1}{2}gt^2=(1.53*4)+\frac{-9.8*16}{2} =-72.28 m\\ d_2=vt=-37.67*4=-150.68 m\\d=-150.68+72.28=-78.4 m[/tex]

Thus, we can conclude that, the answers to the question are, a) after 4s, the speed of the mailbox will be, 40.73m/s downwards.

b)78.4m downwards.

c) v=37.67m/s downward. and d=78.4m downward.

Learn more about the equation of uniformly accelerated motion here:

https://brainly.com/question/28044927

#SPJ4

A certain frictionless simple pendulum having a length l and mass m swings with period t. If both l and m are doubled, what is the new period?.

Answers

If l and m both are doubled then the period becomes √2*T

what is a simple pendulum?

It is the one which can be considered to be a point mass suspended from a string or rod of negligible mass.

A pendulum is a weight suspended from a pivot so that it can swing freely.

Here,

A certain frictionless simple pendulum having a length l and mass m

mass of pendulum = m

length of the pendulum = l

The period of simple pendulum is:

[tex]T = 2\pi \sqrt{\frac{l}{g} }[/tex]

Where k is the constant.

Now the length and mass are doubled,

m' = 2m

l' = 2l

[tex]T' = 2\pi \sqrt{\frac{2l}{g} }[/tex]

[tex]T' = \sqrt{2}* 2\pi \sqrt{\frac{l}{g} }[/tex]

[tex]T' = \sqrt{2} * T[/tex]

Hence,

If l and m both are doubled then the period becomes √2*T

Learn more about Simple Harmonic Motion here:

https://brainly.com/question/17315536

#SPJ4

A 67 V power supply is connected to three identical resistors in series. If the current through the resistors is measured at 0.95 A, what is the value of each resistor? Round your answer to 2 decimal places.

Answers

The value of each resistor is 23.51 ohms.

Value of each resistor

The value of each resistor is calculated as follows;

R₁ = R₂ = R₃ = R

Total resistance, Rt = 3R

V = IRt

V = I(3R)

R = V/3I

R = (67)/(3 x 0.95)

R = 23.51 ohms

Thus, the value of each resistor is 23.51 ohms.

Learn more about resistor here: https://brainly.com/question/24858512

#SPJ1

The rarest type of stars are A. stars that are about 1 solar mass. B. stars that are more than 50 solar masses. C. stars that are about 10 solar masses. D. stars that are about 0.5 solar mass.

Answers

The rarest type of stars is those that are more than 50 solar masses.

How are stars categorized?

Stars are categorized on the basis of mass, spectral behavior, and temperature.

There are 7 spectral types of stars:

O-type (Blue) stars have more than 50 times the solar mass of the sun and are the rarest main sequence stars present in the universe. Their abundance is merely 0.000001% of known stars.

B-type (Blue) stars have 10 times the solar mass of the sun with a surface temperature of over 20,000 K and their abundance is 0.1% of known stars.

A-type (Blue) stars have 2 times the solar mass of the sun with a surface temperature of 8500 K. Their abundance is 0.7% of known stars.

F-type (Blue/white) stars have 1.5 times the solar mass of the sun with a surface temperature of 6500 K. Their abundance is 2% of known stars.

G-type (White/yellow) stars have 1 times the solar mass of the sun with a surface temperature of 5700 K. Their abundance is 3.5% of known stars.

K-type (Orange/red) stars have 0.7 times the solar mass of the sun with a surface temperature of 4500 K. Their abundance is 8% of known stars.

M-type (Red) stars have 0.2 times the solar mass of the sun with a surface temperature of 3200 K. Their abundance is 80% of known stars.

Thus, the rarest type of stars are the O-type stars that have more than 50 times the solar mass of the sun.

Learn more about stars here:

https://brainly.com/question/11624159

#SPJ4

what is Doppler effect

Answers

Doppler effect is the shift in frequency as the object gets near an object/person or far away from an object or person.

When the frequency of a police car is heard from far away, the frequency is low and long wave lengthsWhen the frequency of a police car is heard from near, the frequency is high and short-wave lengths

Hope it helps!

1. Determine the energy released per kilogram of fuel used.
Given MeV per reaction, calculate energy in joules per kilogram of reactants.
Consider 1 mole of uranium-235 to be a mole of “reactions” (molar mass = 235 grams).

2. Determine the energy released per kilogram of fuel used.
Given MeV per reaction, calculate energy in joules per kilogram of reactants.
Consider 1 mole of uranium-235 to be a mole of “reactions” (molar mass = 235 grams).

Answers

200 MeV of energy is the energy released per kilogram of fuel used. 
E1/E2=7.61=8 (E1 , E2 are energies)

U is equal to 1 kilogram or 1000 g.
There are 6.02310 23 atoms in one mole, or 235 g, of uranium. Therefore, 6.02310 23 atoms are present in 1000 g of 92/235 U.
It is understood that one atom releases 200 MeV of energy during its fission.

As a result, the energy released from the fission of one kilogram of 92/235 is given by E 2 = 6.02310 23 1000200/235 =5.10610 26 MeV E1/E2=7.61=8

In light of this, the energy released during the fusion of one kilogram of hydrogen is roughly eight times greater than the energy generated during the fission of one kilogram of uranium.

To learn more about Fission please visit -
https://brainly.com/question/27923750
#SPJ1

Answer:

200 MeV of energy is the energy released per kilogram of fuel used.

E1/E2=7.61=8 (E1 , E2 are energies)

U is equal to 1 kilogram or 1000 g.

There are 6.02310 23 atoms in one mole, or 235 g, of uranium. Therefore, 6.02310 23 atoms are present in 1000 g of 92/235 U.

It is understood that one atom releases 200 MeV of energy during its fission.

As a result, the energy released from the fission of one kilogram of 92/235 is given by E 2 = 6.02310 23 1000200/235 =5.10610 26 MeV E1/E2=7.61=8

In light of this, the energy released during the fusion of one kilogram of hydrogen is roughly eight times greater than the energy generated during the fission of one kilogram of uranium.

Other Questions
What is Right to information? and What is the importance of Right to information? Letitia's first experience at the dentist was a traumatic one. During that first visit, the dentist used no anesthetic before drilling her teeth. Now, just sitting in the waiting room and hearing the sound of the drill makes Letitia nauseous. This is an example of what kind of conditioning You are evaluating the following two mutually exclusive projects: Project Year 0 Year 1 Year 2 A -$100 $100 $200 B -$50 $60 $125 Both have 15% cost of capital. Using NPV profiles for Projects A and B, determine which project would be chosen under each of IRR rule and NPV rule. (Hint: Draw the NPV profiles.) Triangle is reflected across the y-axis and then dilated by a factor of centered at the origin. Which statement correctly describes the resulting image, triangle ?Image of right triangle ABC in a graph with vertices A (minus 4, minus 2), B (4, minus 2), and C (4, 4)A. The reflection preserves the side lengths and angles of triangle . The dilation preserves angles but not side lengths.B. Both the reflection and dilation preserve the side lengths and angles of triangle .C. Neither the reflection nor the dilation preserves the side lengths and angles of triangle .D. The dilation preserves the side lengths and angles of triangle . The reflection does not preserve side lengths and angles. Company TYK forecasts that it will begin paying dividends seven years from now, at which point dividends are $1 per share. Thereafter, dividends are expected to growth at a constant rate of 6% per year. The discount rate for TYK is 10%. How much would you pay for one share in Company TYK? Why did designers of the hall of mirrors in versailles use expensive, imported glass? Suppose you are looking to purchase a new TV. You are placing it in an opening that is 136 cm wide but want to leave at least 2 cm of room on either side of the TV. If the TV screen measures 86 cm high, what is the largest size TVin inches, that you can purchase? TV's are measured based on the diagonal measure. (1inch = 2.54cm) Write your answer as an integer Which of the following is NOT one of a wholesaler's channel functions? Group of answer choices off-price retailing financing risk bearing bulk breaking transportation according to research, __________. group of answer choices detecting strangers' lies is fairly easy very few people are even minimally good at detecting strangers' lies the polygraph is very accurate in determining when one is lying we are better at detecting our lovers' lies when we suspect that they are not telling the truth to begin with In making sound capital budgeting decisions, the principal focus is on: Write a short program that asks the user to enter a month & prints a message based on the month Write the pseudocode of the recursive algorithm for solving the towers of hanoi problem and computing the greatest common divisor of two integers The diagonals of a rectangle measure x+5 feet and 2x+1 feet what is the value of x? Which practice was the top priority for New England settlers during the early colonial era? Which of the following can be used to measure absolute time? Select all that apply.A. varvesB. tree ringsC. law of superpositionD. ratio of C-12 to C-14 in a bone sample I WILL GIVE BRAINLIEST!!!!2 step equation:4x + 3 = 192 step equation w/ fractions:(4/3)x + 5 = 17Distributive Property:4x(6 - 2) - 10 = 20Decimals:4.3x + 0.7 = 5Real world equation:Sharon's restaurant is bringing in money from customers, and she needs to know how much she needs to pay off the bill for the electricity to run the place. To turn the electricity on, she has to pay $25. For every hour that the electricity is on for, she has to pay $4. How many hours can she have the electricity on for if she makes $49 profit?i really need some help solving these Which player in the economy supplies labor in the factor market? Government Households Business firms Rest of the world Tom has 7 hamsters. If each hamster weighs 11 pounds, how much weight is there in total? Select all of the following true statements if R = real numbers, N = natural numbers, and S = {10, 11, 12,...}.A. -15NB. NRC. SND. NE. NSF. {10.11.12,...}S The nutrient needs of young boys and girls do not differ until about the age of 8 or 9 years.a. true b. false