From each of the following ion concentrations in a solution, predict whether a precipitate will form in the solution. (Hint: Calculate Q and compare Q to Ksp)
a) [Ba2+] = 0.020 M, [F-] = 0.015 M Ksp= 1.0x10-6
BaF2(s)  Ba2+(aq) + 2F-(aq)
b) [Pb2+] = 0.035 M, [Cl-] = 0.15M Ksp= 1.6x10-5
PbCl2(s)  Pb2+(aq) + 2Cl-(aq)

The net ionic equation for the reaction of solid barium carbonate with an aqueous solution of hydrochloric acid is,

BaCO3 (s) + 2H+ (aq) -----> Ba2+ (aq) + H2O (l) + CO2 (g)

What is a net ionic equation?

The net ionic equation is an equation in which the ions which are actively participating in a reaction are present. The ions which do not undergo any change is removed from the equation. So these ions are called as spectator ions.

The overall reaction of solid barium carbonate with an aqueous solution of hydrochloric acid can be written as,

BaCO3 (s) + 2HCl (aq) -------> BaCl2 (aq) + H2O (l) + CO2 (g)

Here the spectator ions are chloride (Cl-) ions.

Therefore, the chloride ions are removed from the overall reaction to write the net ionic reaction as,

BaCO3 (s) + 2H+ (aq) ------> Ba2+ (aq) + H2O (l) + CO2 (g)

To learn more about net ionic reactions click on the given link https://brainly.com/question/19705645

#SPJ4

⁹⁴Pu₂₄₄-------> ⁹⁵Am₂₄₃ + electron is a nuclear equation for plutonium emitting gamma radiation

Alpha particles plutonium is created in an activator when uranium atoms absorb neutrons. Nearly all plutonium is man-made. Plutonium mainly emits alpha particle is a type of radiation that is easily ceased and has a short range. It also emits neutrons, beta particles, and gamma rays. It also emits neutrons, beta particles, and gamma rays.

It is contemplated toxic, in part, because if it were to be inhaled it could deposit in the lungs and finally cause damage. There are five common isotopes of plutonium because it emits alpha particles, plutonium is most menacing when inhaled.

So we can conclude that Plutonium isotopes emit alpha rays except for plutonium-241 for which the energy of beta electrons is curiously low.

Learn more about Plutonium here: https://brainly.com/question/15186972

#SPJ1

The wavelengths of light that can break the Cl-Cl bond and the bond in O₂ will be λ = 3.53 × 10⁻⁷ m and λ =2.4 × 10⁻⁷ m respectively.

Cl-Cl- Bond energy (E)= 339 KJ/mol

O=O Bond energy (E)= 498 KJ/mol

h = 6.626 × 10⁻³⁴ J.s

c = 3 × 10⁸ m/s

N = 6.02214076 × 10²³

For Cl-Cl bond

  We will use the following formulae

     λ = Nhc/E (for one mol photons)

  Put the values

λ = [(6.02214076 × 10²³ p/mol)(6.626 × 10⁻³⁴ J.s)(3 × 10⁸ m/s) / (339 × 10³ J/mol)] × 1 nm / 10⁻⁹ m

    λ = 353 nm

    λ = 3.53 × 10⁻⁷ m

For O=O bond

  We will use the following formulae

     λ = Nhc/E (for one mol photons)

  Put the values

λ = [(6.02214076 × 10²³ p/mol)(6.626 × 10⁻³⁴ J.s)(3 × 10⁸ m/s) / (498 × 10³ J/mol)] × 1 nm / 10⁻⁹ m

    λ = 240 nm

    λ = 2.40 × 10⁻⁷ m

You can also learn about wavelengths from the following question:

https://brainly.com/question/13533093

#SPJ4

The aqueous solution here would freeze at -9.163 degree celsius.

The temperature at which it boils is 375.60 K. This gets converted into Celsius = 102.45-degree Celsius (i)

The standard temperature of boiling is = 100 degree Celsius (ii)

The standard temperature of freezing is = 0 degrees celsius (iii)

We know the formula -  

Depression in cooling/ Elevation in boiling = [tex]K_{b}[/tex] / [tex]K_{f}[/tex] (iv)

The standard values for both Ks are 0.5 and 1.87 respectively. (v)

Using the given values of (i), (ii), (iii), (iv), and (v), we find that -

= (102.45 - 100.00) / (0 - x) = 0.5 / 1.87

x, here is the temperature for freezing.

= Temperature at which it freezes = - 9.163 degree Celsius.

Learn to know more about solutions on

https://brainly.com/question/2626617?referrer=searchResults

#SPJ4

pH after adding 10.0 ml of acid = 9.81, pH after adding 20.0 ml of acid = 5.31.pH after adding 30.0 ml of acid = 1.20

In chemistry, the pH scale is used to define the acidity or alkalinity of an aqueous solution. Historically, pH stood for "hydrogen potential". The pH values ​​of acidic solutions are usually lower than those of basic or alkaline solutions.

An acid (acid catalysis) is any substance that tastes unpleasant in aqueous solution, turns blue litmus paper red, reacts with some metals to release hydrogen, combines with bases to form salts, and stimulates chemical processes. A Brnsted-Lowry acid or Lewis acid is a molecule or ion that has the ability to donate a proton or form a covalent bond with an electron pair. Proton donors, also known as Brnsted-Lowry acids, are the first class of acids.

learn more about pH here:

https://brainly.com/question/15289741

#SPJ4

cyclohexanone is the compound which is shown.

what is cyclohexanone-

The chemical substance known as cyclohexanone has the formula (CH2)5CO. The compound is a six-carbon cyclic molecule with a functional group called a ketone.

IUPAC (International Union of Pure and Applied Chemistry) nomenclature is based on the naming of a molecule's longest chain of carbons connected by single bonds, whether in a continuous chain or in a ring.

six-carbon ring with oxygen bonded to one of the carbon atoms in the ring is cyclohexanone.

learn more about cyclohexanone here;

https://brainly.com/question/28163979

#SPJ4

38.1 ml of a 12% (v/v) propyl alcohol solution would need 4.5 ml of propyl alcohol.

What purpose does the isopropyl alcohol solution serve?

To learn more about propyl alcohol, follow the link https://brainly.com/question/29219081

#SPJ4

The concentration of I- is found to be 1.25 x 10^-3 M when this solution is saturated. The solubility product constant for lead (II) iodide is: Ksp = 1,95 x 10^-9.

The balanced chemical equation of lead (II) iodide is:

PbI2(aq) <=> Pb2+(aq) + 2I-(aq)

   s                     s               2s

We can only include the ions from gas and aqueous phases in the equilibrium equation. Hence, the solubility product constant (Ksp) of this reaction is:

Ksp = [Pb2+][I-]^2

Ksp = s(s)^2

Ksp = s^3

If the concentration of I- is 1.25 x 10^-3:

Ksp = s^3

Ksp = 1.25 x 10^-3 (1.25 x 10^-3)^2

Ksp = 1.25 x 10^-3 (1,56 X 10^-6)

Ksp = 1,95 x 10^-9

Learn more about Ksp here https://brainly.com/question/25134328

#SPJ4

False. As the reaction proceeds toward equilibrium, the concentrations of [tex]H_2[/tex] and [tex]I_2[/tex] gradually decrease, while the concentration of HI gradually increases.

In a chemical reaction, an equilibrium is reached when a reaction that proceeds in both ways has both forward and backward reactions at an equal rate.

For example, consider the reaction below:

A + B <---> C + D

At equilibrium, the rate of formation of A and B will be equal to the rate of formation of C and D.

Now, let us apply this to the reaction:

[tex]H_2 + I_2 < --- > 2HI[/tex]

Since the reactants are  [tex]H_2[/tex] and [tex]I_2[/tex], initially, their concentrations will decrease while the concentration of the product, HI will increase. This will continue until the reaction reaches an equilibrium.

Thus, that the concentrations of  [tex]H_2[/tex] and [tex]I_2[/tex] will gradually increase while the concentration of HI will gradually decrease as the reaction approaches an equilibrium is false.

More on equilibriums can be found here: https://brainly.com/question/15118952

#SPJ1

Work is entropy free and it does transfer entropy but the claim is not valid, the entropy of a fluid passing through an adiabatic steady state system with a single outlet and inlet can change due to irreversibilities present in the system during the process.

What is entropy?

Why doesn't entropy change when there is a work transfer?

To know more about entropy:

https://brainly.com/question/21578229

#SPJ4

The compound that is covalent is the compound A.

We know that the forces that holds the molecules of an ionic substance together is so strong that the ionic substances are known to have a high melting and a high boiling point. Thus, it is already clear that the compounds B and C are both ionic because they are highly conducting and they also have a high melting and boiling point.

The compound A has a low melting and boiling point and also does not conduct electricity. This goes to tell us that A is a covalent compound.

Learn more about covalent compound:https://brainly.com/question/11632372

#SPJ1

Answer:

compound A

Explanation:

edge 2023

9.17ml is the volume of stock solution used in dilution.

0.24M is the concentration of the diluted solution.

The dilution formula can be used to solve

c₁v₁=c₂v₂

Here,c₁=concentration of HNO₃ used

v₁=volume of stock solution to be used (unknown)

c₂=concentration of HNO₃ to be prepared

v₂=volume of HNO₃ to be prepared

6.0M x v₁=110ml x 0.500M

v₁= (110ml x 0.500M)/6.0M

v₁= 9.17ml

b)c₁v₁=c₂v₂

c₁=concentration of HNO₃ that is used for diluting

v₁=volume for dilution

c₂=concentration of diluted solution(unknown)

v₂=volume diluted

Putting the values in the formula

6.0M x 10.0ml = c₂ x 250.0ml

=0.24M

To solve more questions on Dilution visit

https://brainly.com/question/15118137

#SPJ4

Microstructure of only alpha will represent an alloy that is below the solubility limit for component b in the alpha phase.

The alpha and beta phases are phases that represent a solid solution of elements A and B. The alpha phase will have a crystal structure like pure A and will contain some B substituting in the crystal lattice. Likewise,  beta phases will have an element B crystal structure with A substituting for some B atoms.

To know more about crystal lattice click here:

https://brainly.com/question/1669724

#SPJ4

The pressure, in atm, if the sample of helium is compressed to 125 ml is 2.32 atm

An ideal gas is a theoretical gas composed of many randomly transferring factor particles that aren't difficult to interparticle interactions. the best gasoline idea is beneficial because it obeys the precise gas law, a simplified equation of country, and is amenable to evaluation under statistical mechanics.

Volume is a degree of occupied three-dimensional space. it's far more frequently quantified numerically the usage of SI-derived gadgets or by way of diverse imperial gadgets. The definition of length is interrelated with the extent.

Using the ideal gas equation:-

At constant temperature

Given;

P₁ = 0.9 atm

V₁ = 322 ml = 0.322 L

P₂ = ?

V₂ = 125 ml = 0.125 L

P₁V₁ =P₂V₂

P₂ = P₁V₁ /V₂

    = 0.9 × 0.322 /0.125

    = 2.32 atm

Learn more about ideal gas here:-https://brainly.com/question/20348074

#SPJ4

melting of gold, burning of magnesium, and water evaporation.

One instance of a physical change is melting. A physical change is when a sample of matter experiences a change in some of its qualities but not in its identity. Water turns into water vapor when it is heated.

Physical changes, such as melting, evaporation, and condensation, are different from those that result in the synthesis of new materials through chemical reactions.

Magnesium reacts with water to produce hydrogen gas, which, when exposed to the intense heat and oxygen present in air, ignites explosively. When it reacts, the heat generated causes the water molecule to shrink and transform into hydrogen gas.

To learn more about chemical transformation refer to

https://brainly.com/question/12808682

#SPJ4

The compound  [tex]CCl_{4}[/tex] contains polar covalent bonds having partial negative charges on the Cl atoms.

So, the correct option is B.

The four polar covalent bonds between carbon and chlorine in carbon tetrachloride ( [tex]CCl_{4}[/tex]) give it its name as a covalent compound. Due to the variation in atoms' values of electronegativity, the bonds in this compound are polar. The molecule is asymmetrical, which means that the opposing opposite forces balance each other out, and as a result, the molecule is not polar.

The four bonds have symmetry and are spread out in four different directions. In each order, the dipole moments are thus canceled out. Tetrachlorocarbon is a non-polar molecule as a result. Although the electronegativities of C and Cl are different, the carbon tetrachloride molecule has no dipole moment.

Learn to know more about Covalent bonds on

https://brainly.com/question/3447218

#SPJ4

A  time when you experienced microaggression was when i wnet to college in another state. The lecturer in one of my course was very angry that i left my tribe, my state to another state to study. There was element of mockery in his voice.

I felt sad, angry and also bad at the same time. I just wanted to run away from the class because all eyes were on me.

Microaggressions relate to ionization energy through the power they command or hold. I can explain Microaggressions  as ionization energy to someone  as having the power to aggressively give out a part of you that can be good or bad.

Ionization energies gauge an atom's propensity to resist losing electrons. For instance, removing an electron from a neutral fluorine atom to create a positively charged ion requires a significant amount of energy.

Note that Microaggressions are everyday verbal, behavioral, or environmental slights that signal hostility, denigration, or negative views toward stigmatized or culturally marginalized groups. They can be deliberate or inadvertent. Chester M., a psychiatrist at Harvard University, originated the phrase.

Learn more about Microaggressions  from

https://brainly.com/question/28099077
#SPJ1

Lowering the flame can result in the tip overheating.

An overheating plasma system will wear out torch parts quickly and eventually may burn out the torch and leads.

What is an oxy-acetylene torch set?

A gas torch that burns a mixture of acetylene and oxygen to produce a high-temperature flame (3,000°C or 5,400°F) that can weld or cut metal.

Can an oxy-acetylene torch explode?

Thus, lowering the flame's size may result in the tip overheating.

To know more about oxy-acetylene torch:

https://brainly.com/question/21888168

#SPJ4

The calculations about the neutralization reaction show that;

1) hydroxide ions has a concentration of  0.0025 M

2) The amount of the HCl is 0.01 moles

3) The reaction equation is; [tex]KOH (aq)+ HCl(aq) ----- > H_{2} O (l)+ KCl(aq)[/tex]

4) The pH of the solution is 7.

We know that the addition of the potassium to the water is going to lead to a reaction that would produce potassium hydroxide as one of the products of the reaction as we can see it; [tex]2K(s) + 2H_{2} O(l) ---- > 2KOH(aq) + H_{2}(g)[/tex]

Number of moles of the potassium used =  0.195g/39 g/mol

= 0.005 moles

Since we produced 0.005 moles of hydroxide ions, the concentration of the hydroxide ions is; 0.005 moles * 500/1000 L = 0.0025 M

ii) Number of moles of the hydrogen ions =  Concentration * volume

= 0.1 * 100/1000

= 0.01 moles

The balanced reaction equation of the neutralization reaction is given by;

[tex]KOH (aq)+ HCl(aq) ----- > H_{2} O (l)+ KCl(aq)[/tex]

The pH of the solution ought to be seven.

Learn more about neutralization:https://brainly.com/question/27891712

#SPJ1

The solids are a new substance which indicate that a new substance is formed between the Kool-Aid and water as the chemical reaction has occurred between these two substances.

Chemical reaction is defined as a reaction which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical reaction.

There are several characteristics of chemical reactions like change in color, change in state , change in odor and change in composition . During chemical reaction there is also formation of precipitate an insoluble mass of substance or even evolution of gases.

There are three types of chemical reactions:

1) inorganic reactions

2)organic reactions

3) biochemical reactions

During chemical reactions atoms are rearranged and reactions are accompanied by an energy change as new substances are formed.

Learn more about chemical reaction,here:

https://brainly.com/question/14929452

#SPJ2

The mass of silver deposited in the electrode when a current of 3 ampere passes in 50 minutes is 6.71 g.

Electrolysis is the process of passing current through an electrolyte solution and results in the redox process where the reduced metal is deposited in the cathode.

The mass deposited w of a metal in electrolysis is can be calculated using the equation w = zit where, the z is the equivalent mass and t be the time I is the current passed.

The equivalent mass of Ag is 108 g. for one ampere the charge q will be 96500 C. Now,

w = 108 × 3 × ( 50 × 60 seconds) /96500 = 6.71 g.

Hence, the mass of silver deposited is 6.71 g.

To find more on electrolysis, refer here:

https://brainly.com/question/12054569

#SPJ1

The volume required is 4.86 ml that would be required to react completely with 11.73 ml of 1.006 m ca(oh)2.

This can be calculated using:

3Ca(OH)2 (aq) + 2H3PO4 (aq) ---> Ca3(PO4)2 (s) + 6H2O (l)

moles of Ca(OH)2 present: 11.00 moles

moles of H3PO4 needed: 7.33 moles

volume (mls) of H3PO4 needed: 7.33/1.508 = 4.86

To know more about this problem, click here,

brainly.com/question/29222844

#SPJ4

Answer:

Magnesium + hydrochloric acid → magnesium chloride + hydrogen

why? because the product of a neutralization reaction are always a salt and water. This reaction is the only one which does not have water as a product, so it is not neutralization.

mark as brainliest :D

The empirical formula of a compound containing c, h, and o is C₂H₆O₁.

In chemistry, the empirical formula represents the simple whole-number ratio of the atoms which are present in the compound. The initial step is to calculate and determine the masses. The next step which follows is to calculate the number of moles by dividing the grams by the atomic mass. Next, the number of moles is divided by each element by the smallest number of moles. Finally, we convert numbers to whole numbers since we don't represent empirical formulas in decimals.

To learn more about hydrocarbons and chemical compounds,

https://brainly.com/question/28482314

#SPJ4

Answer:

Fluorine does not form an ion with a charge of 1+.

A man is sitting on a chair and exerting 100 N of force downward, while a spring beneath the chair exerts 150 N of force upward. The net force acting on the system is in the upward direction with a magnitude of 50N.

Force is the product of mass and acceleration which is dependent on the rate of change of momentum.

According to the given question,

Magnitude of force in the downward direction = 100N

Downward force = 100N

Magnitude of force in the upward direction = 150N

Upward force = -150N

Net force on the system = Upward force + Downward force

Net force on the system = -150N + 100N

Net force on the system = -50N

Hence, the net force acting on the system is in the upward direction with a magnitude of 50N.

Learn more about Force here, brainly.com/question/13191643

#SPJ9

Answer: 50N

Explanation:

Answer:

Explanation:

Ionic bonds form between two or more atoms by the transfer of one or more electrons between atoms. Electron transfer produces negative ions called anions and positive ions called cations. These ions attract each other.

Explanation: An ionic bond is formed because sodium is a part of the Alkali metals and Oxygen is a non-metal and a gas. 4Na + O2 → 2Na2O (s) OR Na + O2 → NaO2 (s).

Answer:

Explanation:

Ionic bonds form between two or more atoms by the transfer of one or more electrons between atoms. Electron transfer produces negative ions called anions and positive ions called cations. These ions attract each other.

Assume at the end of step b in “The Copper Cycle” experiment, we had only solid product b and water. Considering the reactions after that, the ions present in the water before the rinsing and decanting are: copper (II) ions and hydroxide ions.

The copper cycle experiment aims to perform a series of reactions that regenerate elemental copper at the end of the copper cycle. In this cycle, the reaction series includes single replacement, double replacement, synthesis, and decomposition reactions.

In step b, the ions that exist in the water are copper (II) and hydroxide ions which are stated as: [Cu(H2O)6]2+(aq) + 2OH- --> Cu(OH)2(s) + 6H2O(l).

Learn more about the molarity of copper here https://brainly.com/question/13897172

#SPJ4

The amount of Si needed to react with an excess of nitrogen gas to prepare 125g of silicon nitride if the percent yield of the reaction is 95% is 88.20 g.

We know that,

Percentage (%) yield = ( actual yield /theoretical yield ) × 100

Using this we can derive that,

Theoretical yield = (Actual yield / Percentage(%) yield) × 100

= (125 / 85) × 100 = 147.06g Si₃N₄

The mole ratio of Si: Si₃N₄ = 3 :1

Grams of Si required to produce 147.06 g  Si₃N₄,

= ( 3 mole Si /1 mol Si₃N₄) ( 28.05 g Si /1 mole Si) * (1 mole Si₃N₄, /140.3 g Si₃N₄,) *147.06 g Si₃N₄

=  88.20 g Si

To learn more about chemical compounds,

https://brainly.com/question/11432693

#SPJ4

The type of reaction which occurs when the oxidation numbers of 2 or more atoms change is an oxidation-reduction{redox} reaction.

A redox (redox) reaction is a type of chemical reaction in which electrons are transferred between two species redox reaction is a chemical reaction in which the oxidation number of a molecule, atom, or ion changes by gaining or losing an electron.

There  are 2 classes of redox reactions  which are:

electron transfer where electrons flow from the reducing agent  to the oxidant

atom transfer atom transfers an atom from one substrate to another

There are different types of redox reactions which are:

To learn more about redox reactions see:

https://brainly.com/question/11965624?referrer=searchResults

#SJP4