Helium-neon laser light (λ = 6.33 × 10−7 m) is sent through a 0.30 mm-wide single slit. What is the width of the central maximum on a screen 1.0 m from the slit?

Answer:

The average density of the rod is 1.605 kg/m.

Explanation:

The average density of the rod is given by:

[tex] \rho = \frac{m}{l} [/tex]    

To find the average density we need to integrate the linear density from x₁ = 0 to x₂ = 3, as follows:

[tex] \int_{0}^{3} \frac{8}{3(x + 1)}dx [/tex]

[tex] \rho = \frac{8}{3} \int_{0}^{3} \frac{1}{(x + 1)}dx [/tex]   (1)

Using u = x+1  →  du = dx  → u₁= x₁+1 = 0+1 = 1 and u₂ = x₂+1 = 3+1 = 4

By entering the values above into (1), we have:

[tex] \rho = \frac{8}{3} \int_{0}^{3} \frac{1}{u}du [/tex]

[tex]\rho = \frac{8}{3}*log(u)|_{1}^{4} = \frac{8}{3}[log(4) - log(1)] = 1.605 kg/m[/tex]

Therefore, the average density of the rod is 1.605 kg/m.  

I hope it helps you!    

The average density of the rod is  [tex]1.605 \;\rm kg/m^{3}[/tex].

Given data:

The length of rod is, L = 3 m.

The linear density of rod is, [tex]\rho=\dfrac{8}{x+1} \;\rm kg/m[/tex].

To find the average density we need to integrate the linear density from x₁ = 0 to x₂ = 3,  The expression for the average density is given as,

[tex]\rho' = \int\limits^3_0 { \rho} \, dx\\\\\\\rho' = \int\limits^3_0 { \dfrac{m}{L}} \, dx\\\\\\\rho' = \int\limits^3_0 {\dfrac{8}{3(x+1)}} \, dx[/tex]............................................................(1)

Using u = x+1  

du = dx

u₁= x₁+1 = 0+1 = 1

and

u₂ = x₂+1 = 3+1 = 4

By entering the values above into (1), we have:

[tex]\rho' =\dfrac{8}{3} \int\limits^3_0 {\dfrac{1}{u}} \, du\\\\\\\rho' =\dfrac{8}{3} \times [log(u)]^{4}_{1}\\\\\\\rho' =\dfrac{8}{3} \times [log(4)-log(1)]\\\\\\\rho' =1.605 \;\rm kg/m^{3}[/tex]

Thus, we can conclude that the average density of the rod is  [tex]1.605 \;\rm kg/m^{3}[/tex].

Learn more about the average density here:

https://brainly.com/question/1371999

Answer:

Explanation:

The lens equation is expressed as;

1/f = 1/u+1/v where;

f is the focal length of the lens

u is the object distance

v is the image distance

Since the near sighted person wants focus the starts at nigt, the stars at night are the images located that infinity. Hence the image distance v = ∞.

The object distance u = 130cm

Substituting the given parameters in the formula to get the focal length f

[tex]\frac{1}{f} = \frac{1}{\infty} + \frac{1}{130} \\\\As \ x \ tends \ to \ \infty, \, \frac{a}{x} \ tends \ to \ 0 \ where\ 'a' \ is \ a\ constant \\\\} \\\\[/tex]

[tex]\frac{1}{f} = 0+ \frac{1}{130}\\\\[/tex]

[tex]\frac{1}{f} =\frac{1}{130}\\cross\ multiply\\\\f = 130*1\\\\f = 130cm[/tex]

Hence the focal length of contact lenses that would allow a nearsighted person with a 130 cm far point to focus on the stars at night is 130cm

Answer:

Pressure, P = 1250 Pa

Explanation:

Given that,

Weight of a brick, F = 50 N

Dimension of the brick is 30.0 cm × 10.0 cm × 4.00 cm

We need to find the maximum pressure it can exert on a horizontal surface due to its weight. Pressure is equal to the force acting per unit area. Pressure exerted is inversely proportional to the area of cross section. So, we need to minimize area. Taking to smaller dimensions.

A = 40 cm × 10 cm = 400 cm² = 0.04 m²

So,

Pressure,

[tex]P=\dfrac{50\ N}{0.04\ m^2}\\\\P=1250\ Pa[/tex]

So, the maximum pressure of 1250 Pa it can exert on a horizontal surface.

The maximum pressure it can exert on a horizontal surface due to its weight will be 1250 Pascal.

The force applied perpendicular to the surface of an item per unit area across which that force is spread is known as pressure. It is denoted by P.

The given data in the problem is;

W is the weight of a brick = 50 N

The dimension of the brick = 30.0 cm × 10.0 cm × 4.00 cm

A is the area,

The area is found as;

A=40 cm × 10 cm = 400 cm² = 0.04 m²

The pressure is the ratio of the force and area

[tex]\rm P = \frac{F}{A} \\\\ \rm P = \frac{50}{0.04} \\\\ \rm P =1250 \ Pascal[/tex]

Hence the maximum pressure it can exert on a horizontal surface due to its weight will be 1250 Pascal.

To learn more about the pressure refer to the link;

https://brainly.com/question/356585

Answer:

a. 320.06 Nm b. 2.814 rad/s² c. 2.811 rad/s².

Explanation:

a. The torque exerted τ = Frsinθ where F = tangential force exerted = 185 N, r = radius of grindstone = 1.73 m and θ = 90° since the force is tangential to the grindstone.

τ = Frsinθ

= 185 N × 1.73 m × sin90°

= 320.05 Nm

So, the torque τ = 320.05 Nm

b. Since torque τ = Iα where I = moment of inertia of grindstone = 1/2MR² where M = mass of grindstone = 76 kg and R = radius of grindstone = 1.73 m

α = angular acceleration of grindstone

τ = Iα

α = τ/I = τ/(MR²/2) = 2τ/MR²

substituting the values of the variables, we have

α = 2τ/MR²

= 2 × 320.05 Nm/[76 kg × (1.73 m)²]

= 640.1 Nm/227.4604 kgm²

= 2.814 rad/s²

So, the angular acceleration α = 2.814 rad/s²

c. The opposing frictional force produces a torque τ' = F'r' where F' = frictional force = 20.0 N and r' = distance of frictional force from axis = 1.50 cm = 0.015 m.

So  τ' = F'r' = 20.0 N × 0.015 m = 0.3 Nm

The net torque on the grindstone is thus τ'' = τ - τ' = 320.05 Nm - 0.3 Nm = 319.75 Nm

Since τ'' = Iα

α' = τ''/I where α' = its new angular acceleration

α' = 2τ/MR²

= 2 × 319.75 Nm/[76 kg × (1.73 m)²]

= 639.5 Nm/227.4604 kgm²

= 2.811 rad/s²

So, the angular acceleration α' = 2.811 rad/s²

Answer:

Pls seeattached file

Explanation:

A resistor made of Ni chrome wire is used in an application where its resistance cannot be more than 1.35 % so its temperature range will be from 33.75 to -33.75 °C.

Electrical resistance, or resistance to electricity, is a force that opposes the flow of current. Ohms are used to expressing resistance values.

When there is an electron difference between two terminals, electricity will flow from high to low. In opposition to that flow is resistance. As resistance rises, the current declines. On the other side, when the resistance falls, the current rises.

According to the question,

R = R₀ (1 + α ΔT)

(1 + 0.0135)R₀ = R₀(1 + α ΔT)

ΔT = (1 + 0.0135) / α

= 0.0135 / 0.0004

= 33.75 °C.

ΔT = [(1 - 0.0135) -1]/0.004

= -33.75 °C

To get more information about Resistance :

https://brainly.com/question/11431009

#SPJ5

Answer:

power = 600000 W

intensity = 6666666.66 W/m²

Em = 70880.18 N/m

F = 2 × [tex]10^{-3}[/tex] N  

Explanation:

given data

frequency f = 2400 MHz

height oven cavity h = 25 cm = 0.25 m

base area measures A =  30 cm by 30 cm

total microwave energy content of cavity E = 0.50 mJ = 0.50 × [tex]10^{-3}[/tex]  

solution

first, we get here total time taken from top to bottom that is express as

Δt = [tex]\frac{h}{c}[/tex]  ...............1

Δt = [tex]\frac{0.25}{3\times 10^8}[/tex]  

Δt = 8.33 × [tex]10^{-10}[/tex] s

and

power output will be

power = [tex]\frac{E}{\Delta t}[/tex]   ..............2

power = [tex]\frac{0.50 \times 10^{-3}}{8.33 \times 10^{-10}}[/tex]

power = 600000 W

and

intensity of the microwave beam is  

intensity = power output ÷ base area    ..............2

intensity =  [tex]\frac{600000}{30 \times 30 \times 10^{-4}}[/tex]  

intensity = 6666666.66 W/m²

and

electric field amplitude is

as we know intensity  I = [tex]\frac{E^2}{c \mu o}[/tex]     ...............3

[tex]E(rms) = \sqrt{Ic\ \mu o} \\E(rms) = \sqrt{6666666.66 \times 3 \times 10^{8} \times 4 \pi \times 10^{-7} }[/tex]

E(rms) = 50119.87 N/m

and we know

[tex]E(rms) = \frac{Em}{\sqrt{2}}\\50119.87 = \frac{Em}{\sqrt{2}}[/tex]  

Em = 70880.18 N/m

and

force on the base due to the radiation is by the radiation pressure

[tex]Pr = \frac{l}{c}[/tex]    ..................4

[tex]\frac{F}{A} = \frac{l}{c}[/tex]  

so

F = [tex]\frac{6666666.66 \times 900 \times 10^{-4}}{3\times 10^8}[/tex]  

F = 2 × [tex]10^{-3}[/tex] N  

Answer:

v = 0.89 c = 2.67 x 10⁸ m/s

Explanation:

The time dilation consequence of the special theory of relativity shall be used here, From time dilation formula we have:

t = t₀/√[1 - v²/c²]

where,

t = time measured by the person on earth = 2.50 s

t₀ = rest time of the intergalactic rock star = 1.30 s

v = relative speed of the rock star = ?

Therefore,

2.5 s = (1.3 s)/√[1 - v²/c²]

√[1 - v²/c²] = 1.3/2.5

√[1 - v²/c²] = 0.52

[1 - v²/c²] = 0.52²

[1 - v²/c²] = 0.2074

v²/c² = 1 - 0.2074

v²/c² = 0.7926

v/c = √0.7926

v = 0.89 c

where,

c = speed of light = 3 x 10⁸ m/s

v = (0.89)(3 x 10⁸ m/s)

v = 0.89 c = 2.67 x 10⁸ m/s

Answer:

No

Explanation:

Moon has no light of its own. It just shines because its surface reflects light from the sun and that's what we see.

:-)

Answer:

The magnitude of the magnetic field at the center of the loop is 3.846 x 10⁻⁵ T.

Explanation:

Given;

number of turns of the flat circular loop, N = 18 turns

radius of the loop, R = 15.0 cm = 0.15 m

current through the wire, I = 0.51 A

The magnetic field through the center of the loop is given by;

[tex]B = \frac{N\mu_o I}{2R}[/tex]

Where;

μ₀ is permeability of free space = 4π x 10⁻⁷ m/A

[tex]B = \frac{N\mu_o I}{2R} \\\\B = \frac{18*4\pi*10^{-7} *0.51}{2*0.15} \\\\B = 3.846 *10^{-5} \ T[/tex]

Therefore, the magnitude of the magnetic field at the center of the loop is 3.846 x 10⁻⁵ T.

Answer:

6 rad/s²

Explanation:

Sum the torques about the hinge.

∑τ = Iα

mg(L/2) = mL²/3 α

g/2 = L/3 α

α = 3g/(2L)

α = 3 (10 m/s²) / (2 × 2.50 m)

α = 6 rad/s²

Answer:

93.3x10^-3s

Explanation:

If

Resistance = 1.8 kΩ

Current = 50 mA

Capacitor = 120 μF

Voltage = 140 V

to calculate the discharge current

Applying the formula of discharge current

io=vo/R

io= 140/ 1.8x 10³

= 0.078A

to calculate the time

Applying the formula of current

io= vo/R e-t/RC

50= 140/1800e-t/RC

0.649= e-t/RC

-t/RC= ln( 0.649)

t = 0.432x 120x10^-6x 1800

t=93.3 x 10^-3seconds

Answer:

A) 60 Hz

B) 0.04 T

Explanation:

Given that.

Number of turns, N = 200

Length of the side, l = 20 cm = 0.2 m

Speed if rotation, w = 3600 rpm

Voltage, V = 120 V

First, we try to convert the speed from rpm to rad/s

3600 * (2π/60)

3600 * 0.10473

3600 rpm = 377 rad/s

Now, we use that as our w, speed of rotation

Frequency of output, f =

w/2π

f = 377 / 6.284

f = 59.99 Hz or approximately, 60 Hz.

B

Strength of the magnetic field in which the coil is turning

E• = NABw

Where, A = l² = 0.2² = 0.04, on substituting the values to the equation, we have

120 = 200 * 0.04 * 377 * B

120

Making B subject of formula,

B = 120/ 3016

B = 0.04 T..

The frequency of the output voltage is 60 Hz and the strength of the magnetic field is 0.04 T

Answer:

The spring constant should be:

[tex]k= 98\, \frac{N}{m}[/tex]

Explanation:

Use Hooke's law for this problem, knowing that the magnitude of the force (F) on the spring equals the stretching it experiences [tex]\Delta x[/tex] times the spring constant "k":

[tex]F=k\,\Delta x[/tex]

in our case, since the mass hanging is given in kg, we need to multiply it by "g" to get the force exerted:

Then if we add to the spring in its relaxed state, a mass of 0.10 kg, and we want for that a displacement of 1 cm (0.01 m), then the value of the spring constant should be:

[tex]k=\frac{F}{\Delta x} \\k=\frac{9.8\,(0.1)}{0.01} \, \frac{N}{m} \\k= 98\, \frac{N}{m}[/tex]

Answer:

 I = 1.23 A

Explanation:

In an RL circuit current passing is described by

           I = E / R (1 - [tex]e^{-Rt/L}[/tex])

Let's reduce the magnitudes to the SI system

        L = 35 mH = 35 10⁻³ H

        t = 5.0 ms = 5.0 10⁻³ s

let's calculate

         I = 18/12 (1 - [tex]e^{-12 .. 5 {10}^{-3}/35 .. {10}^{-3} }[/tex]e (- 5 10-3 12/35 10-3))

         I = 1.5 (1- [tex]e^{-1.715}[/tex])

         I = 1.23 A

We are being given that:

A pictorial view showing the diagrammatic representation of the information given in the question is being attached in the image below.

From the attached image below, the potential difference across the conducting element of the length (dx) moving with the velocity (v) appears to be perpendicular to the magnetic field (B).

The magnitude of the potential difference induced between the center of the blade in relation to either of its ends can be determined by using the derived formula from Faraday's law of induction which can be expressed as:

[tex]\mathsf{E = B\times l\times v}[/tex]

where;

From the diagram, Let consider the length of the conducting element (dx) at a distance of length (x) from the center O.

Then, the velocity (v) = ωx

The potential difference across it can now be expressed as:

[tex]\mathsf{dE = B*(dx)*(\omega x)}[/tex]

For us to determine the potential difference, we need to carry out the integral form from center point O to L/2.

∴

[tex]\mathsf{E = \int ^{L/2}_{0}* B (\omega x ) *(dx)}[/tex]

[tex]\mathsf{E = B (\omega ) \times \Big[ \dfrac{x^2}{2}\Big]^{L/2}_{0}}[/tex]

[tex]\mathsf{E = B (\omega ) * \Big[ \dfrac{L^2}{8}\Big]}[/tex]

Recall that,

[tex]\mathsf{E = (4\times 10^{-3}) * (17) \Big[ \dfrac{(1.5)^2}{8}\Big]}[/tex]

[tex]\mathsf{E = 19.13 mV}[/tex]

Thus, we can now conclude that the magnitude of the potential difference as a result of the rotation caused by the metal blade from the center to either of its ends is 19.13 mV.

Learn more about Faraday's law of induction here:

https://brainly.com/question/13369951?referrer=searchResults

Answer:

366 N

Explanation:

  τ = Iα

FR = ½mR²α

  F = ½mR(Δω/t)

  F = ½(207)(1.50)(0.75)(2π) /2.00

  F = 365.79919...

Answer:

physical feature of a wave is related to the depth of the wave base is The circular orbital motion

B. The wave base is the depth, and the still water level is the horizontal level

Answer:

Explanation:

Given data:

power rating of the heater P= 1010 W

voltage of the heater V= 115 volts

current taken by the heater I= ?

We can apply the power formula to solve for the current in the heater

i.e P= IV

Making I the current subject of formula we have

I= P/V

Substituting our given data into the expression for I we have

I=1010/115= 8.78 A

Answer:

The velocity is  [tex]v = 8.743 \ m/s[/tex]

Explanation:

From the question we are told that

    The frequency of the signal sent out  is  [tex]f_s = 38.0 \ kHz = 38.0 *10^{3} \ Hz[/tex]

    The frequency of the signal received is  [tex]f_r = 40.0 \ kHz = 40.0 *10^{3} \ Hz[/tex]

     The  speed of sound is  [tex]v_s = 341 \ m/s[/tex]

Generally the frequency of the sound received is  mathematically represented as

         [tex]f_r = f_s [\frac{v_s + v}{v_s - v} ][/tex]

where v is the velocity of the object

       =>      [tex]40 *10^{3} = 38 *10^{3} * [\frac{341 + v}{341 - v} ][/tex]

       =>      [tex]1.05263 = \frac{341+v }{341-v}[/tex]

       =>   [tex]358.94 - 1.05263v = 341 + v[/tex]

      =>    [tex]17.947 = 2.05263 v[/tex]

      =>    [tex]v = 8.743 \ m/s[/tex]

Answer:

a)  t = 2 10⁻² s ,  t = 2.4 10-1 s

Explanation:

In this exercise they indicate the delay in two signals

a) A signal travels on an electrical cable, between New York and London.

The wave formed in this wire for the signal. This wave travels at the speed of light, c = 3 108 m / s, so the delay is very small

                t = d / c

               t = 6000 10³/3 10⁸

               t = 2 10⁻² s

b) The signal points to a satellite in geostationary orbit

                   distance traveled = √ (2 36000 10³)² + 6000²

                  distance = 72 10⁶ m

the waiting time is

                t = d / c

                t = 72 10⁶/3 10⁸

               t = 2.4 10-1 s

    we can see that the signal sent by the satellites has more delay because its distance is much greater

Answer:

Explanation:

To convert from °C to °F , the formula is

( F-32 ) / 9 = C / 5

F is reading fahrenheit scale and C is in centigrade scale .

F = 205 , C = ?

(205 - 32) / 9 = C / 5

C = 96°C approx .

Let us calculate the heat required .

Total heat required = heat required to heat up the ice at - 20 °C  to 0°C  + heat required to melt the ice + heat required to heat up the water at  0°C to

96°C.

=  5 x 2.04 x (20-0) +  5 x 336 + 5 x ( 96-0 ) x 4.2  kJ .

= 204 + 1680 + 2016

= 3900 kJ .

Complete Question

A 590-turn solenoid is 12 cm long. The  current in it is 36 A . A 2 cm straight wire cuts through the center of the solenoid, along a 4.5-cm diameter. This wire carries a 27-A current downward (and is connected by other wires that don't concern us).

What is the magnitude of the force on this wire assuming the solenoid's field points due east?

Answer:

The force is  [tex]F = 0.1602 \ N[/tex]

Explanation:

From the question we are told that

   The number of turns is  [tex]N = 590 \ turns[/tex]

   The  length of the solenoid is  [tex]L = 12 \ cm = 0.12 \ m[/tex]

   The current is  [tex]I = 36 \ A[/tex]

   The  diameter is  [tex]D = 4.5 \ cm = 0.045 \ m[/tex]

   The  current carried by the wire is  [tex]I = 27 \ A[/tex]

    The  length of the wire is  [tex]l = 2 cm = 0.02 \ m[/tex]

Generally the magnitude of the force  on this wire assuming the solenoid's field points due east is mathematically represented as

           [tex]F = B * I * l[/tex]

Here  B  is the magnetic field which is mathematically represented as

          [tex]B = \frac{\mu_o * N * I }{L}[/tex]

Here   [tex]\mu _o[/tex] is permeability of free space with value  [tex]\mu_ o = 4\pi *10^{-7} \ N/A^2[/tex]

substituting values

         [tex]B = \frac{4 \pi *10^{-7} * 590 * 36 }{ 0.12}[/tex]

           [tex]B = 0.2225 \ T[/tex]

So

      [tex]F = 0.2225 * 36 * 0.02[/tex]

      [tex]F = 0.1602 \ N[/tex]

Answer:

Number of turns of wire(N) = 3,036 turns (Approx)

Explanation:

Given:

Diameter = 13 Cm

emf = 5.6 v

Note:

The given question is incomplete, unknown information is as follow.

Magnetic field increases = 0.25 T in 1.8 (Second)

Find:

Number of turns of wire(N)

Computation:

radius (r) = 13 / 2 = 6.5 cm = 0.065 m

Area = πr²

Area = (22/7)(0.065)(0.065)

Area = 0.013278 m²

So,

emf = (N)(A)(dB / dt)

5.6 = (N)(0.013278)(0.25 / 1.8)

5.6 = (N)(0.013278)(0.1389)

N = 3,036.35899

Number of turns of wire(N) = 3,036 turns (Approx)

Answer:

The water takes longer, because it is the better insulator here.

Explanation:

Conductors and insulators work similarly in "reverse".

If something is a good heat conductor, then it's good at both absorbing heat energy and giving it away. Insulators are good at resisting temperature changes, but also take longer to cool down once they are heated up.

So because copper is the better conductor here, it will cool faster than the water at the same temperature.

Answer:

5.465 × 10^10 revolutions

Explanation:

Formula for Magnetic Field = m. v/ q . r

M = mass of electron = mass of positron = 9.11 x 10^-31 kg,

radius of the positron = 5.03 mm

We convert to meters.

1000mm = 1m

5.03mm = xm

Cross multiply

x = 5.03/1000mm

x = 0.00503m

q = Electric charge = -1.6 x 10^-19 C

Magnetic field (B) = 0.85 T

Speed of the positron is unknown

0.85 = 9.11 x 10^-31 kg × v/ -1.6 x 10^-19 C × 0.00503

0.85 × 1.6 x 10^-19 C × 0.00503 = 9.11 x 10^-31 kg × v

v = 0.85 × -1.6 x 10^-19 C × 0.00503/9.11 x 10^-31 kg

v = 6.8408 ×10-22/ 9.11 x 10^-31 kg

v = 750911086.72m/s

Formula for complete revolutions =

Speed × time / Circumference

Time = 2.30s

Circumference of the circular path = 2πr

r =0.00503

Circumference = 2 × π × 0.00503

= 0.0316044221

Revolution = 750911086.72 × 2.30/0.0316044221

= 1727095499.5/0.0316044221

= 546541562294 revolutions

Approximately = 5.465 × 10^10 revolutions

Answer:

The number of turns in the secondary coil is 4145 turns

Explanation:

Given;

the induced emf on the primary coil, [tex]E_p[/tex] = 95 V

the induced emf on the secondary coil, [tex]E_s[/tex] = 875 V

the number of turns in the primary coil, [tex]N_p[/tex] = 450 turns

the number of turns in the secondary coil, [tex]N_s[/tex] = ?

The number of turns in the secondary coil is calculated as;

[tex]\frac{N_p}{N_s} = \frac{E_p}{E_s}[/tex]

[tex]N_s = \frac{N_pE_s}{E_p} \\\\N_s = \frac{450*875}{95} \\\\N_s = 4145 \ turns[/tex]

Therefore, the number of turns in the secondary coil is 4145 turns.

Answer:

The wavelength is 2.16 m.

Explanation:

Given the speed of the sound = 343 m/s

Trombone generate the frequency = 159 Hz

Now we have to find the wavelength of the sound. Here, we can find the wavelength by dividing the speed of the sound with frequency.

The wavelength of the sound = Speed of sound/frequency

Wavelength of the sound = 343 / 159 = 2.16 m

Answer:

3. the intermolecular bonding of water

Explanation:

Anomalous behavior of water is an advantage in aquatic habitat during winter. Because of some unique properties of water, it behaves irregularly. Thus, a pond or river does not freeze completely during winter.

Water has its highest density when temperature is 4[tex]^{0}C[/tex] , and lowest volume at 4[tex]^{0}C[/tex]. Thus, the denser layers of water sink accordingly until the upper layer is the least dense during winter. This layer then freeze leaving the layers below it unfrozen.

Answer:

D. The tendency for water to freeze from the bottom up.

Explanation: