How many moles are in 140 g NH,
A) 0.12 mol NH,
B) 0.33 mol NH,
C) 7.78 mol NH,
D) 6.25 mol NH,

The partial charge on a selected atom in a polar molecule because of variations in electronegativity.

Sometimes at some stage in bonding there may be an unequal sharing of electrons. This unequal sharing of electrons consequences in a partial tremendous fee and a partial terrible charge. Partial atomic or factor charges are used to symbolize the electrostatic capability round a molecule and the Coulomb interactions among those factor fees dominate the calculation of intermolecular interactions. The covalent bond among atoms with distinctive electronegative consequences in unequal sharing of electrons. This unequal sharing of electrons results in partly tremendous and partly terrible fees on the alternative ends of the bond.

To learn more about partial charge check the link below:

https://brainly.com/question/8168184

#SPJ4

In order to find out the number of moles of NaOH that are needed to completely neutralize 50 ml of a 0.2 M solution of HCl, we can use the balanced equation for the neutralization reaction:

HCl(aq) + NaOH(aq) → H2O(l) + NaCl(aq)

The above balanced equation tells us that for every mole of HCl that reacts in the reaction, one mole of NaOH is required.

Now, to find out the number of moles of HCl that are present in 50 ml of 0.2 M solution, we can use the following formula:

molarity = moles of solute / litres of solution

Therefore, to find the number of moles of HCl that are present in 50 ml of  0.2 M solution:

moles of HCl = (0.2 mol/L) x (0.05 L)

                      = 0.01 mol

Hence, one mole of NaOH is required for each mole of HCl, 0.01 mol of NaOH is needed to neutralize 50 ml of a 0.2 M solution of HCl.

To know more about neutralization reaction refer to-

brainly.com/question/23008798#

#SPJ4

We use ite and ate when named ionic compounds with oxygen.

Ionic compound names applying -ite and -ate

When an element creates two oxyanions, the name of the one with less oxygen ends in -ite, and the name of the one with more oxygen ends in -ate. For illustration, KNO2 stands for potassium nitrite and KNO3 for potassium nitrate. Cations (positive ions) and anions(negative ions)make up ionic compounds.The names of the component ions serve as the basis for the nomenclature or naming of ionic compounds. Ionic compound names always place the positively charged cation before the negatively charged anion. names of ionic compounds ending in -ite and -ate. Some polyatomic anions contain oxygen. These anions are referred to as oxyanions. The names of the two oxyanions that an element forms end in -ite and -ate, respectively, depending on how much oxygen is present in each. An illustration of a nitrite is KNO2. Nitrite, NO2 nitrate (NO3) sulfite (SO32) sulphate (SO42) sulphate.

To learn more about ionic compounds visit,

https://brainly.com/question/29005103

#SPJ4

0.01 moles of sodium hydroxide are needed to completely neutralize 50 ml of a 0.2 m solution of HCl.

In order to calculate the amount of sodium hydroxide needed to completely neutralize 50 ml of a 0.2 m solution of HCl, we need to determine the number of moles of HCl present in the solution. To do this, we will use the following formula:

Moles of HCl = Concentration of HCl (mol/L) x Volume of HCl (L)

In this case, the concentration of HCl is 0.2 mol/L and the volume of HCl is 0.05 L (50 ml is equivalent to 0.05 L).

Therefore, the number of moles of HCl in the solution is 0.2 mol/L x 0.05 L = 0.01 mol.

Since sodium hydroxide reacts with HCl in a 1:1 ratio, the amount of sodium hydroxide needed to completely neutralize the HCl is equal to 0.01 mol.

To learn more about neutralize, click here:

https://brainly.com/question/27891712

#SPJ4

When a patient is burnt by a dry chemical, the burnt surface should be cleaned with a large amount of sterile water for about 20 minutes as a first aid.

In serious conditions, the patient should be rushed to the hospital immediately.

One such dry chemical causing burns is "dry lime", which is a strong  and corrosive substance that reacts with water. It produces heat which subsequently causes thermal and chemical injuries.

In case of burns caused by dry lime, the burnt surface should be brushed off the patient gently and completely as soon as possible. Then, the contaminated area should be rinsed with large volumes of cold water.

To know more about dry chemical here

https://brainly.in/question/2640423

#SPJ4

The chemical formulas cross method worksheet are listed below in the answer.

A chemical formula lists the constituent components of a compound together with how many atoms of each are present in the complex's smallest unit, whether it be a molecule or a formula unit. We can name simple compounds based on their chemical formulas by using the names of the elements and a few simple criteria.

Cations are positive-charged ion particles. Atoms or molecules that are ionic are charged. If an electron or more are lost from a balanced atom, it will change into a positively charged cation. When a balanced atom gains one or more electrons, an anion, a negatively charged atom, forms.

1. Na₂so₄

4.  Kcl,  , , K₃PO₄, KNO₃, K₂SO4

5.  Mg₂Cl₂, Mg₃ (Po₄)₂, Mg₃ (No₂)₂, Mgso₄

6. AlCl₃, AlPo₄, Al (No₃)₃, Al₂(so₄)₃

7. HCl, H₃PO₄, HNO₃, H₂SO₄

8. FeCl₂, Fe(PO₄)₂, Fe(NO₃)₂, FeSo₄

The chemical formulas cross cross method worksheet are listed above.

To learn more about chemical formula visit:

brainly.com/question/29031056

#SPJ1

Explanation:

cu+cl2........Cucl2

this is answer also balanced

The conclusion would be that shielded protons accept radiation at higher frequencies, whereas deshielded protons absorb at lower frequencies (frequency).

The electrons surrounding the proton generate a magnetic field which is diametrically opposed to the applied field. The electrons were considered to protect the proton since this lessens the field experienced at the nucleus.

When the electron density from around nucleus was high in NMR, the opposing magnetic field towards electrons was similarly high, providing significant shielding. When the electron density surrounding the nucleus decreases, the magnetic field resisting it decreases, and the nucleus feels more than just the external magnetic field.

The conclusion would be that shielded protons accept radiation at higher frequencies, whereas deshelled protons absorb at lower frequencies (frequency).

To know more about shielded protons

https://brainly.com/question/14939585

#SPJ4

The Correct answer is Option B) Sulfur. This is the element in pyrite that contributes to acid mine drainage.

One ingredient that should never be ignored is sulphur(S). Group 16 of the periodic table is where Sulphur is located. It is obtained as a byproduct following the manufacturing of natural gas and is non-metal. It is a bright yellow colour and has a terrible smell (like rotten eggs). Sulfur has been consumed by people for a thousand years despite its apparent physical characteristics. Why? Considering that you might just come across it on the ground.

Sulfur is a straightforward element to locate both on the ground and in the periodic table. It occupies the sixteenth position, immediately below oxygen (O). Sulfur is typically found as crystal and has a yellowish color when it occurs naturally.

To learn more about Sulphur visit:

brainly.com/question/15654465

#SPJ1

c) Hydrogen bonds have similar bond strength as ionic bond interactions in aqueous solutions.

Key points:

Learn more about hydrogen bonds here:

https://brainly.com/question/17310474

#SPJ4

Answer:

Explanation:To determine the new concentration we use the following formula.

concentration (1) × volume (1) = concentration (2) × volume (2)

concentration (1) = 0.1 M

volume (1) = 100 mL

concentration (2) = unknown

volume (2) = 100 mL + 900 mL = 1000 mL

concentration (2) = [concentration (1) × volume (1)] / volume (2)

concentration (2) = (0.1 × 100) / 1000 = 0.01 M

In the redox conversion of SO₃ to SO⁻, S undergoes reduction and it's oxidation number goes from +6  to +1.

The number of electrons an atom or ion has either gained or lost in comparison to the neutral atom is known as the oxidation number or state of the atom or ion.

Group I, 2, and 3 electropositive metal atoms lose a certain number of electrons, and their positive oxidation numbers remain constant.

During a reduction reaction, the oxidation number of the element that undergoes reduction decreases.

Learn more about reduction reaction at: https://brainly.com/question/21851295

#SPJ1

If 263802 if 263 kJ are produced. Methane was burned in an amount of 3 kJkJ mol. Thus, approximately 5–6 g, or more than 1/4 mole, of methane was burned.

The pace at which mass is lost as a result of fuel combustion is known as the mass-burning rate. The rate of change in temperature from the fuel surface toward the flame can also be used to describe the temperature gradient at the fuel surface.

The product of the density of the unburned gas, the flame speed of the unburned gas, and the surface area of the flame front determines the mass burning rate of the unburned air-fuel-burned gas mixture inside the combustion chamber of an engine.

The product of the density of the unburned gas, the flame speed of the unburned gas, and the surface area of the flame front determines the mass burning rate of the unburned air-fuel-burned gas mixture inside the combustion chamber of an engine.

Combustion of methane, which you have kindly provided

CH4(g)+2O2(g)→CO2(g)+2H2O(g) ;ΔH=−802.3kJmol−1

As written, the enthalpy change is given per mole of reaction. That is, the exact amount of energy produced by burning 1 mol of methane to produce stoichiometric amounts of carbon dioxide and water vapour is 802.3 k J. In order to treat the energy as a product, I may write the reaction in this manner.:

CH4(g)+2O2(g)→CO2(g)+2H2O(g)+802.3 kJ.

o if 263 kJ are generated then

263kJ/ 802.3 kJ * 1⋅mol

methane were combusted. So this is something more than 1/4 a mole of methane combusted, approx. 5-6 g.

To know more about Mass Burning Rate refer to:

https://brainly.com/question/626058

#SPJ1

Basically a Carbon having Atomic mass of 12g is known to have 1 Mole.

Chemical element carbon has the atomic number six and the letter C assigned to it as its Symbol. It has a tetravalent atom, which means that four of its electrons can be used to create covalent chemical bonds. It is nonmetallic. The carbon is included in the Periodic Table's group 14. The  Earth's crust contains 0.025 percent carbon.

Carbon has Following Specifications:

to know more about Carbon visit:

https://brainly.com/question/22530423

#SPJ4

Similarities between neon signs and fireworks include that both involve the use of gas, emit light,  Neon signs use neon gas, which is excited by an electric current to produce light, while fireworks use a variety of gases that are excited by heat to produce light.

They both can be used to create visually appealing displays and both neon signs and fireworks can be made in a variety of colors by using different gases or by adding other chemicals.. Differences between neon signs and fireworks include that neon signs are typically used for commercial or decorative purposes and are relatively stationary, while fireworks are used for special events and are designed to be launched into the air.

At the atomic level, the light emission in neon signs occurs due to the excitation of the electrons in the neon atoms. When an electric current is passed through the neon gas, the electrons in the atoms absorb energy and become excited, moving to a higher energy level. This light is emitted as a specific color that is determined by the energy of the light waves. In contrast, fireworks emit light through a chemical reaction, where the heat generates the energy needed to excite the electrons in the atoms and molecules of the chemicals used in the firework.

Find out more on neon signs and fireworks here: https://brainly.com/question/18514765

#SPJ1

On observing the structure of CH4 we can say that there is one carbon atom in CH4 (methane).

Methane is a chemical that has the molecular formula CH4. The most basic alkane and the major component of natural gas, which is also used as fuel, is a group-14 hydride. Methane has one carbon atom and four hydrogen atoms bonded to the carbon center in a tetrahedral arrangement, making up a single isolated molecule with the formula CH4. The simplest alkane without a doubt, methane is one of the most basic organic molecules. Four additional atoms or molecules must be bonded to the carbon atom because of its quadro-valency. Thus, the basic alkane methane has 4 hydrogen atoms bonded to 1 carbon atom per molecule.

Learn more abou CH4 here:

https://brainly.com/question/28933327

#SPJ4

O₂ has a covalent bond between them.

O₂ is a covalent molecule because each oxygen atom needs two valence electrons to complete its octet. To meet this need, each oxygen atom shares two of its electrons with the other oxygen forming a strong oxygen-oxygen double shared covalent bond. covalent bond is formed when the two atoms share their electrons rather than properly transferring them like in ionic bonds. covalent bonds can be broken by giving a particular amount of heat. covalent bonds are weaker than ionic bonds but they are also strong than van der wall force. covalent bonds comes in the second number after the other atom. oxygen gas has the covalent double bond between them because they share electrons between them and they covalent force attraction between them. hence we can see that O₂ has covalent bonds between them.

Learn ore about Covalent Bond:

brainly.com/question/19382448

#SPJ4

Answer:

the stem

Explanation:

yjsbsksvznzbfb

Answer:

Hydrogen-Bonding Force

Explanation:

Molecules that can participate in Hydrogen bonding are N, O, or F. This compound also has a dipole-dipole but the hydrogen bonding is stronger. Fluorine is highly electronegative hence hydrogen bonding is the strongest.

Yes, the qs for the formation and decomposition of 1 mol of NO have opposite signs.

The heat of formation, or the heat absorbed when 1 mol of a substance is formed from its elements, represents the symbol qf. The heat of decomposition or the heat is given off when 1 mol of a substance breaks down into its elements, is represented by the symbol qd. The relationship between the two qs is that qf and qd are equal in magnitude but opposite in sign; qf is negative and qd is positive.

The relationship between qf and qd is that they are equal in magnitude but opposite in sign. For example, if qf for the formation of NO is -100 kJ, then qd for the decomposition of NO will be +100 kJ.

In summary, qf and qd is the heat absorbed or released during the formation and decomposition of a substance respectively. They are equal in magnitude but opposite in sign. The heat absorbed during formation is negative and the heat released during decomposition is positive.

Learn more about thermochemistry here: https://brainly.com/question/29137878

#SPJ4

There are 2.408 * 10²⁴ atoms  in 4 moles of gold by using Avogadro's Number.

The quantity (10) of substance having 6.02214 *10²³ particles is known as a mole. 6.02214*10²³ particles make up one mole. Avogadro's number is another name for this number. Keep in mind that a mole is defined as a quantity of stuff.

The term "mole" refers to the quantity of a material that includes the same number of elementary particles (ions, molecules, or atoms) as there are atoms in 12 g of carbon-12.

It offers a precise count of atoms or molecules in a large sample of materials.

1 mole of gold contains 6.022 * 10²³ atoms

4 moles of gold contains 4 * 6.022 * 10²³ = 2.408 * 10²⁴ atoms

To learn more about Moles refer to  :

https://brainly.com/question/8044135

#SPJ1

Hydrogen and oxygen can form both ionic and covalent bonds, depending on the circumstances.

In an ionic bond, atoms transfer electrons to one another, resulting in positively and negatively charged ions. For example, when hydrogen gas (H2) is burned in the presence of oxygen gas (O2), the hydrogen atoms lose electrons and become positively charged ions (H+), while the oxygen atoms gain electrons and become negatively charged ions (O2-), forming water (H2O). This is an ionic bond between H+ and O2-.In a covalent bond, atoms share electrons in order to achieve a full outermost electron shell, which is more stable. For example, in the diatomic molecule H2, the two hydrogen atoms share electrons in order to complete their outermost electron shell. This is a covalent bond between the two H atoms. Similarly, in the diatomic molecule O2, the two oxygen atoms share electrons in order to complete their outermost electron shell.

Learn more about ionic bond here:

https://brainly.com/question/12663276

#SPJ4

UV-visible spectroscopy  used to measure the concentration of the molecules in a dilute solution. The part of the molecule that can absorb uv-visible light is called as chromophores.

UV-visible spectroscopy  used to measure the concentration of the molecules in a dilute solution. The part of the molecule that can absorb uv-visible light is called as chromophores. The absorption of the UV - visible radiation in the organic molecules is restricted for some molecules that contains the valence electrons of low energy.

The chromophore is the region in the molecule in which the difference in the energy between the two molecular orbitals comes in the range of the visible spectrum.

To learn more about spectroscopy here

https://brainly.com/question/29461520

#SPJ4

The electronegativity decreases as you move down the group 1 elements.

What do you mean by electronegativity?

Electronegativity basically is a measure of an atom's ability to attract electrons when it is part of a chemical bond. It is the tendency of an atom to attract the electrons in a chemical bond towards itself. Electronegativity is related to a number of different other physical and chemical properties, including acidity, reactivity, and also bond strength.

The element hydrogen has an electronegativity of 2.2, lithium has an electronegativity of 0.98, sodium has an electronegativity of 0.93, and potassium has an electronegativity of 0.82 respectively.

To know more about electronegativity,

https://brainly.com/question/1163776

#SPJ1

The total mass in micrograms of cofactor A in a yeast colony containing 10 cells is 3.39 micrograms.

Colonies with typical morphologies and organizational structures are formed by yeast cells growing on solid surfaces. During the formation of a colony, yeast cells differentiate and divide into specialized cell subpopulations that are located in specific areas of the structure and carry out specific functions.

They might appear as more raised than staphylococcal colonies, small, creamy or white colonies. Observing pasty, yellow-white colonies with "feet" extending from the margins into the surrounding agar can lead to a preliminary identification of Candida albicans.

In 10⁵ cells you will have,

33.9pg×10⁵ = 3.39×10⁶

1 pg equals to 10⁻⁶ micrograms, so in cells you will have,

1 pg ----- 10⁻⁶ micrograms

3.39×10⁶ pg ----- x

x = 3.39 micrograms.

To know more about micrograms visit:

https://brainly.com/question/13197104

#SPJ4

AlP exposed to an aqueous solution in pH < 4 range will result in the largest amount of phosphine production.

Because H+ is a reactant in the equation, increasing its amount causes the reaction to move to the left. The easiest method to do this is to have an EVERY acidic atmosphere. Phosphine, also known as a pnictogen hydride, is a colourless, combustible, and extremely poisonous molecule having the chemical formula PH3. Because of the presence of substituted phosphine and diphosphane, technical grade samples have a terrible stench similar to rotting fish.

Phosphine is synthesised in the industrial sector from white phosphorus by hydrolysis with an alkali metal hydroxide or an aqueous acid-catalyzed disproportionation process. Normally, the industrial product is supplied as liquefied gas.

To learn more about phosphine production, here

https://brainly.com/question/29856318

#SPJ4

When oxygen makes two bonds, it absorbs the electron density of other atoms to produce a negative two ion.

define electron density ?

The chance of an electron being present at an infinitesimal element of space around any particular place is measured in quantum chemistry as electron density or electronic density. It is a scalar number that is determined by three spatial variables and is commonly denoted as either or. The density is defined by the normalised N-electron wavefunction, which is dependent on 4N variables spatial and N spin coordinates. In contrast, the density modulo a phase component defines the wave function, forming the theoretical foundation of density functional theory.

According to quantum physics, the exact location of an electron on an atomic scale cannot be predicted due to the uncertainty principle, only the chance of its existing in a certain place.

When oxygen makes two bonds, it absorbs the electron density of other atoms to produce a negative two ion. Explanation: Of all elements, oxygen has the second greatest electronegativity. When Oxygen establishes a bond, it moves the bond's electron density closer to the Oxygen and away from the other element.

To learn more about electron density follow the given link: https://brainly.com/question/29470398

#SPJ1

When molten material freezes quickly, the atoms do not have sufficient time to arrange themselves in an orderly crystal structure, and the resulting material is called an amorphous solid, also known as a non-crystalline solid.

Unlike crystalline solids, which have a repeating, ordered structure, amorphous solids do not have long-range order and have a disordered atomic structure. They can be found in a wide range of materials, such as glass, plastic, and some ceramics. Some examples of amorphous solids include window glass, which is formed by rapidly cooling molten silica, and some types of plastic, which are formed by rapidly cooling molten polymer. These materials have unique properties compared to crystalline solids, such as lower thermal conductivity, higher resistance to impact and compression, and a lack of cleavage planes, which makes them more difficult to break.

Learn more about molten material here: brainly.com/question/7849615

#SPJ4

The mineral is an inorganic substance because it is not produced by living organisms and does not contain carbon-hydrogen bonds.

Key points:

Learn more about minerals here:

https://brainly.com/question/89259

#SPJ4