If 1 kg of each substance in the table absorbs 250 kJ of thermal energy,
which substance will have the smallest change in temperature?

Answer:

Thomas is correct that the zero displacements

Lilian is right that the distance is greater than zero.

Explanation:

In this problem we have to be clear about the difference between displacement and distance.

The displacement is a vector, that is, it has a modulation and direction, in this case we can draw a vector for the outward trip and another vector for the return trip, both will have the same magnitude, but their directions are opposite, so the resulting vector is zero.

The distance is a scalar and its value coincides with the modulus of the distance vector, in our case the distance is d for the outward journey and d for the return journey, so the total distance is 2d, which is different from zero.

The two students have some reason, but neither complete,

The displacement is zero because it is a vector and

the distance is different from zero (2d) because it is a scalar

Thomas is correct that the zero displacements

Lilian is right that the distance is greater than zero.

Therefore I agree with both, because each one has a 50% of the reason

Answer:

C. 0.25J

Explanation:

Energy stored in the magnetic field of the inductor is expressed as E = 1/2LI² where;

L is the inductance

I is the current flowing in the inductor

Given parameters

L = 20mH = 20×10^-3H

I = 5A

Required

Energy stored in the magnetic field.

E = 1/2 × 20×10^-3 × 5²

E = 1/2 × 20×10^-3 × 25

E = 10×10^-3 × 25

E = 0.01 × 25

E = 0.25Joules.

Hence the energy stored in the magnetic field of this inductor is 0.25Joules

Answer:

lateral splaying of echoes in the far field can be improved by Increasing the maximum number of transmit focal zones and optimize their location.

Answer:

d.

Explanation:

Since, the capacitance( decreases )

therefore voltage between the plates(increases ).

Hence, option d is correct.

C =εA/d.

d is doubled, therefore  C decrease ( inverse relation).

D) The capacitance decreases and the voltage between the plates increases.

A battery establishes a voltage V on a parallel-plate capacitor. After the battery is disconnected, the distance between the plates is doubled without loss of charge. Accordingly, the capacitance decreases and the voltage between the plates increases.

The capacitance - (decreases)

The voltage between the plates- (increases ).

Thus, the correct answer is D.

Learn more about "Battery":

https://brainly.com/question/15648781?referrer=searchResults

Explanation:

Energy utilization focuses on technologies that can lead to new and potentially more efficient ways of using electricity in residential, commercial and industrial settings—as well as in the transportation sector

Answer:

Explanation:

The Force experienced by the wire in the uniform magnetic field is expressed as F = BILsin∝ where;

B is the magnetic field (in Tesla)

I is the current (in amperes)

L is the length of the wire (in meters)

∝ is the angle that the conductor makes with the magnetic field.

Given parameters

L = 0.56 m

I = 2.6A

F = 0.24N

∝  = 90°

Required

magnitude of the magnetic field (B)

Substituting the given values into the formula given above we will have;

F = BILsin∝

0.24 = B * 2.6 * 0.56 sin90°

0.24 =  B * 2.6 * 0.56 (1)

0.24 = 1.456B

1.456B = 0.24

Dividing both sides by 1.456 will give;

1.456B/1.456 = 0.24/1.456

B ≈ 0.165Tesla

Hence the magnitude of the magnetic field is approximately 0.165Tesla

Answer:

The distance is  [tex]y = 0.03425 \ m[/tex]

Explanation:

From the question we are told that

   The distance of separation is  [tex]d = 60.3 \mu m= 60.3 *10^{-6}\ m[/tex]

   The wavelength is  [tex]\lambda = 482.0 \ nm = 482.0 *10^{-9} \ m[/tex]

    The distance of the screen is [tex]D = 2.14 \ m[/tex]

Generally the distance of a fringe from the central maxima is mathematically represented as

      [tex]y = [m + \frac{1}{2} ] * \frac{\lambda * D}{d}[/tex]

For the first dark fringe m = 0

             [tex]y_1 = [0 + \frac{1}{2} ] * \frac{482*10^{-9} * 2.14}{ 60.3*10^{-6}}[/tex]

             [tex]y_1 = 0.00855 \ m[/tex]

For the second dark fringe m = 1

            [tex]y_2 = [1 + \frac{1}{2} ] * \frac{482*10^{-9} * 2.14}{ 60.3*10^{-6}}[/tex]

            [tex]y_2 = 0.0257 \ m[/tex]

So the distance from the first dark fringe on one side of the central maximum to the second dark fringe on the other side is

         [tex]y = y_1 + y_2[/tex]

        [tex]y = 0.00855 + 0.0257[/tex]

        [tex]y = 0.03425 \ m[/tex]

Answer:

1) a block going down a slope

2) a) W = ΔU + ΔK + ΔE, b) W = ΔE, c)  W = ΔK, d) ΔU = ΔK

Explanation:

In this exercise you are asked to give an example of various types of systems

1) a system where work is transformed into internal energy is a system with friction, for example a block going down a slope in this case work is done during the descent, which is transformed in part kinetic energy, in part power energy and partly internal energy that is represented by an increase in the temperature of the block.

2)

a) rolling a ball uphill

In this case we have an increase in potential energy, if there is a change in speed, the kinetic energy also increases, if the change in speed is zero, there is no change in kinetic energy and there is a change in internal energy due to the stationary rec in the point of contact

 W = ΔU + ΔK + ΔE

b) in this system work is transformed into internal energy

      W = ΔE

c) There is no friction here, therefore the work is transformed into kinetic energy

    W = ΔK

d) if you assume that there is no friction with the air, the potential energy is transformed into kinetic energy

      ΔU = ΔK

Answer:

d. 107 cm above the water surface.

Explanation:

The refractive index of water and air = 1.333

The real height of the girl's sole above water = 80.0 cm

From the water, the apparent height of the girl's sole will be higher than it really is in reality by a factor that is the refractive index.

The boy in the water will therefore see her feet as being

80.0 cm x 1.333 = 106.64 cm above the water

That is approximately 107 cm above the water

(C)

Explanation:

The capacitance C of a parallel plate capacitor is given by

[tex]C = \epsilon_0 \dfrac{A}{d}[/tex]

Let C' be the new capacitance where the area and the plate separation distance are doubled. This gives us

[tex]C' = \epsilon_0\dfrac{A'}{d'} = \epsilon_0\left(\dfrac{2A}{2d}\right) = \epsilon_0 \dfrac{A}{d} = C[/tex]

Answer:

in an accident, when the body collides with the air bags, the collision time of impact between the two bodies will increase due to the presence of air bags in the car. Larger is the impact time smaller is the transformation of energy between the body and air bag. That is why air bags greatly reduce the chance of injury in a car accident.

Answer:

Explanation:

Formula for calculating the relationship between  the electromotive force (emf), current and number of turns of a coil in a transformer is expressed as shown:

[tex]\dfrac{V_s}{V_p} = \dfrac{N_s}{N_p} = \dfrac{I_p}{I_s}[/tex]  where;

Vs and Vp are the emf in the secondary and primary coil respectively

Ns and Np are the number if turns in the secondary and primary coil respectively

Ip and Is are the currents in the secondary and primary coil respectively

Since the are all equal to each other, then we can equate any teo of the expression as shown;

[tex]\dfrac{N_s}{N_p} = \dfrac{I_p}{I_s}[/tex]

Given parameters

Np = 500-turns

Ns = 2000-turns

Is = 3.0Amp

Required

Current in the primary coil (Ip)

Using the relationship [tex]\dfrac{N_s}{N_p} = \dfrac{I_p}{I_s}[/tex]

[tex]I_p = \dfrac{N_sI_s}{N_p}[/tex]

[tex]I_p = \dfrac{2000*3}{500} \\\\I_p = \frac{6000}{500}\\ \\I_p = 12A\\[/tex]

Hence the current in the primary coil is 12Amp

Answer:

b

Explanation:

Answer:

Study Earth as a whole

Explanation:

ex. oxygen around Earth, layers, formations, temperature, mountains and how they form etc.

Answer:

Geologists study rocks and help to locate useful minerals. Earth scientists often work in the field—perhaps climbing mountains, exploring the seabed, crawling through caves, or wading in swamps. They measure and collect samples (such as rocks or river water), then they record their findings on charts and maps.

Explanation:

Answer:

well its about our thinking but i do believe in ghost a little

Answer:

18.5 cm

Explanation:

From;

1/u + 1/v = 1/f

Where;

u= object distance = 86cm

image height = 23 cm

Radius of curvature = 37 cm

The radius of curvature (r) is the radius of the sphere of which the mirror forms a part.

Focal length (f) = radius of curvature (r)/2 = 37cm/2 = 18.5 cm

Therefore, the focal length of the mirror is 18.5 cm

Explanation:

Recall that

[tex]K = \dfrac{v_0^2\sin2\theta}{g}\:\:\:\:\:\:\:\:\:(1)[/tex]

and

[tex]Q = \dfrac{v_0^2\sin^2\theta}{2g}\:\:\:\:\:\:\:\:\:(2)[/tex]

From Eqn(2), we can write

[tex]\sin\theta = \sqrt{\dfrac{2gQ}{v_0^2}}\:\:\:\:\:\:\:\:\:(3)[/tex]

Using the identity [tex]\sin\theta = 2\sin\theta \cos\theta[/tex], we can rewrite Eqn(1) as

[tex]\dfrac{gK}{2v_0^2} = \sin\theta \cos\theta[/tex]

Squaring the above equation, we get

[tex]\dfrac{g^2K^2}{4v_0^4} = \sin^2\theta \cos^2\theta[/tex]

[tex]\:\:\:\:\:\:\:\:\:=\sin^2\theta(1 - \sin^2\theta)\:\:\:\:\:\:\:(4)[/tex]

Use Eqn(3) on Eqn(4) and we will get the following:

[tex]\dfrac{g^2K^2}{4v_0^4} = \dfrac{2gQ}{v_0^2}(1 - \dfrac{2gQ}{v_0^2})[/tex]

This simplifies to

[tex]\dfrac{gK^2}{8v_0^2Q} = 1 - \dfrac{2gQ}{v_0^2}[/tex]

Rearranging this further, we get

[tex]1 = \dfrac{2gQ}{v_0^2} + \dfrac{gK^2}{8v_0^2Q}[/tex]

Putting [tex]v_0^2[/tex] to the left side, we get

[tex]v_0^2 = 2qQ + \dfrac{gK^2}{8Q}[/tex]

Finally, taking the square root of the equation above, we get the expression for the muzzle velocity [tex]v_0[/tex] as

[tex]v_0 = \sqrt{2gQ + \dfrac{gK^2}{8Q}}[/tex]

Answer:

Yes, yes it would

Explanation:

Answer:use the formular distance over time i.e distance/time. Make sure to convert the distance from metres to kilometers and time from minutes to hours .

Explanation:

The average speed of the car is 31,680 meters per hour.

To calculate the average speed of the car, you need to divide the total distance traveled by the time it took to travel that distance.

Given:

Time taken (t) = 10 minutes = 10 minutes × (1 hour / 60 minutes) = 10/60 hours = 1/6 hours

Distance traveled (d) = 5,280 meters

Average Speed (v) = Distance (d) / Time (t)

Average Speed (v) = 5280 meters / (1/6) hours

To simplify, when you divide by a fraction, it's equivalent to multiplying by its reciprocal:

Average Speed (v) = 5280 meters × (6/1) hours

Average Speed (v) = 31,680 meters per hour

Hence, the average speed of the car is 31,680 meters per hour.

To know more about average speed here

https://brainly.com/question/17661499

#SPJ2

Answer:

1. the sphere of the radius a

Explanation:

Because the charge distribution for each case is spherically symmetric, we can choose a spher- ical Gaussian surface of radius r , concentric with the sphere in question.

So E = k (Q /r 2) (for r ≥ R ) , where R is the radius of the sphere being considered, either a or b .

With the choice of potential at r = ∞ being zero, the electric potential at any distance r from the center of the sphere can be expressed as V = - integraldisplay r ∞ E dr = k /Q r

(for r ≥ R ) .

On the spheres of radii a and b , we have V a = k (Q/ a)and V b = k (Q/ b), respectively.

So Since b > a , the sphere of radius a will have the higher potential.

Also recall Because E = 0 inside a conductor, the potential

Answer:

W = 122.3 J

Explanation:

First, we need to find out the force applied to the smaller piston. We know that the pressure applied to smaller piston must be equally transmitted to the larger piston. Therefore,

P₁ = P₂

F₁/A₁ = F₂/A₂

F₂ = F₁(A₂/A₁)

where,

F₁ = Force of Larger Piston = Weight of car = mg = (1500 kg)(9.8 m/s²)

F₁ = 14700 N

F₂ = Force applied to smaller piston = ?

A₁ = Area of larger piston = πd₁²/4

A₂ = Area of smaller piston = πd₂²/4

Therefore,

F₂ = (14700 N)[(πd₂²/4)/(πd₁²/4)]

F₂ = (14700 N)(d₂²/d₁²)

where,

d₁ = diameter of large piston = 50 cm

d₂ = diameter of small piston = 4 cm

Therefore,

F₂ = (14700 N)[(4 cm)²/(50 cm)²]

F₂ = 94.08 N

Now, for the work done on the car:

Work Done = W = F₂ d

where,

d = displacement of car = 1.3 m

Therefore,

W = (94.08 N)(1.3 m)

W = 122.3 J

[tex]2.6×10^6\:\text{m}[/tex]

Explanation:

The acceleration due to gravity g is defined as

[tex]g = G\dfrac{M}{R^2}[/tex]

and solving for R, we find that

[tex]R = \sqrt{\dfrac{GM}{g}}\:\:\:\:\:\:\:(1)[/tex]

We need the mass M of the planet first and we can do that by noting that the centripetal acceleration [tex]F_c[/tex] experienced by the satellite is equal to the gravitational force [tex]F_G[/tex] or

[tex]F_c = F_G \Rightarrow m\dfrac{v^2}{r} = G\dfrac{mM}{r^2}\:\:\:\:\:(2)[/tex]

The orbital velocity v is the velocity of the satellite around the planet defined as

[tex]v = \dfrac{2\pi r}{T}[/tex]

where r is the radius of the satellite's orbit in meters and T is the period or the time it takes for the satellite to circle the planet in seconds. We can then rewrite Eqn(2) as

[tex]\dfrac{4\pi^2 r}{T^2} = G\dfrac{M}{r^2}[/tex]

Solving for M, we get

[tex]M = \dfrac{4\pi^2 r^3}{GT^2}[/tex]

Putting this expression back into Eqn(1), we get

[tex]R = \sqrt{\dfrac{G}{g}\left(\dfrac{4\pi^2 r^3}{GT^2}\right)}[/tex]

[tex]\:\:\:\:=\dfrac{2\pi}{T}\sqrt{\dfrac{r^3}{g}}[/tex]

[tex]\:\:\:\:=\dfrac{2\pi}{(1.44×10^4\:\text{s})}\sqrt{\dfrac{(5×10^6\:\text{m})^3}{(3.45\:\text{m/s}^2)}}[/tex]

[tex]\:\:\:\:= 2.6×10^6\:\text{m}[/tex]

Answer:

 E = - dV / dx

Explanation:

The equipotential lines are lines or surfaces that have the same power, therefore we can move in them without carrying out work between equipotential lines, work must be carried out, therefore the electric field changes.

The electric field and the potential are related by

          E = - dV / dx

therefore when the change is faster, that is, the equipotential lines are closer, the greater the electric field must be.

Answer:

Change in kinetic energy (ΔKE) = 12.8 × 10⁴ J

Explanation:

Given:

Mass of truck(m) = 2,100 kg

Initial speed(v1) = 38 km/h = 38,000 / 3600 = 10.56 m/s

Final speed(v2) = 55 km/h = 55,000 / 3600 = 15.28 m/s

Find:

Change in kinetic energy (ΔKE)

Computation:

Change in kinetic energy (ΔKE) = 1/2(m)[v2² - v1²]

Change in kinetic energy (ΔKE) = 1/2(2100)[15.28² - 10.56²]

Change in kinetic energy (ΔKE) = 1,050[233.4784 - 111.5136]

Change in kinetic energy (ΔKE) = 1,050[121.9648]

Change in kinetic energy (ΔKE) = 128063.04

Change in kinetic energy (ΔKE) = 12.8 × 10⁴ J

Answer:

the correct statement is

* atoms cannot be created or destroyed

Explanation:

The Datlon atomic model was proposed in 1808 and represents atoms as the smallest indivisible particle of matter, they were the building blocks of matter and are represented by solid spheres.

Based on the previous descriptive, the correct statement is

* atoms cannot be created or destroyed

Answer:

the Answer is b hope it help

Explanation:

Answer:

a,)3.042s

b)4.173s

c)3.281s

Explanation:

For a some pendulum the period in seconds T can be calculated using below formula

T=2π√(L/G)

Where L = length of pendulum in meters

G = gravitational acceleration = 9.8 m/s²

Then we are told to calculate

(a) What is the period of small oscillations for this pendulum if it is located in an elevator accelerating upward at 3.00 m/s2?

Since oscillations for this pendulum is located in the elevator that is accelerating upward at 3.00 then

use G = 9.8 + 3.0 = 12.8 m/s²

Period T=2π√(L/G)

T= 2π√(3/12.8)

T=3.042s

b) (b) What is the period of small oscillations for this pendulum if it is located in an elevator accelerating downward at 3.00 m/s2?

G = 9.8 – 3.0 = 6.8 m/s²

T= 2π√(3/6.8)

T=4.173s

C)(c) What is the period of this pendulum if it is placed in a truck that is accelerating horizontally at 3.00 m/s2?

Net acceleration is

g'= √(g² + a²)

=√(9² + 3²)

Then period is

T=2π√(3/11)

T=3.281s

Answer:

In a column of fluid, pressure increases with depth as a result of the weight of the overlying fluid. Thus a column of fluid, or an object submerged in the fluid, experiences greater pressure at the bottom of the column than at the top. This difference in pressure results in a net force that tends to accelerate an object upwards.

The pressure at a depth in a fluid of constant density is equal to the pressure of the atmosphere plus the pressure due to the weight of the fluid, or p = p 0 + ρ h g , p = p 0 + ρ h g , 14.4

Granite: 2.70 × 10 32.70 × 10 3

Lead: 1.13 × 10 41.13 × 10 4

Iron: 7.86 × 10 37.86 × 10 3

Oak: 7.10 × 10 27.10 × 10 2