if 243 mg of mg(oh) 2 was neutralized with 0.0500 m hcl, what volume of hcl would you need for the neutralization?

Answers

Answer 1

volume of HCl would you need for the neutralization is 4 ml .

What is neutralization reaction  ?

In chemistry, neutralization or neutralization (see spelling difference) is a chemical reaction in which acids and bases react quantitatively with each other. When reacting in water, neutralization does not generate excess hydrogen or hydroxide ions in solution. The pH of the neutralized solution depends on the acidity of the reactants.

In the context of chemical reactions, the term neutralization is used for reactions between acids and bases or alkalis. Historically, this reaction was expressed as

Example:

HCl + NaOH → NaCl + H2O

To know more about neutralization reaction , click the given link ;

https://brainly.com/question/2632201

#SPJ4


Related Questions

how could you identify a pure metal if you have a balance, a graduated cylinder, and a table of densities for metals

Answers

You can find the mass and volume of the pure metal then compare the density with the table of densities to determine which metal.

Density is a term used to describe how tightly a substance is packed. It fits that criteria of mass per unit volume. Formula for Density or Density Symbol: D The formula is: = m/V where is the object's mass, m is its density, and V is its volume. The term "mass" is used to describe how much matter there is in a thing. Mass is often represented in kilogrammes (kg) or grammes (g) (kg). The most common units of mass measurement are kilogrammes (kg) and grammes (g). No matter where in the cosmos it is or how much gravitational force is exerted on it, mass is a measure of how much matter there is.

learn more about density here:

https://brainly.com/question/15164682

#SPJ4

Draw a six‑carbon alkyne that can exist as diastereomers. You do not need to specify wedge or dashed bonds.

Answers

A six-carbon alkyne that can exist as diastereomers is 3-methyl-1-pentyne.

Alkynes are hydrocarbons which contain carbon-carbon triple bonds. Their general formula is CnH2n-2 for molecules with one triple bond (and no rings).  the compound contains 6 Carbon atoms, its said to be an alkyne therefore compound should contain a triple bond.

There should be single C as chiral centre. This means that one carbon has 4 different groups attached to it. In the diagram shown has one carbon connected to

1- Hydrogen

2 - CH3 group

3 - C2H5 group

4 - C≡CH

All these groups are of different types, hence the C is a chiral centre .

therefore A six-carbon alkyne that can exist as diastereomers is 3-methyl-1-pentyne.

learn more about alkynes at https://brainly.com/question/23508203

#SPJ4

How large a net force is required to accelerate a 2000-kg suv from rest with an acceleration of 0. 14 m/s2?.

Answers

A large net force of 280N  is required to accelerate a 2000 kg suv from rest with an acceleration of 0.14m/s2 .

According to Newton’s 2nd law of motion,  force is  equal to the change in momentum per change in time.Acceleration of an object depends on the mass of the object and the amount of force applied.

            Force=mass* acceleration

Here, mass is equal to 2000 kg and acceleration is equals to 0.14m/s/s.putting these values,

      F= ma

     F= 2000kg * 0.14 m/s2

        = 280 kg m/s2

        =280N

So, 280N of force is required.

To learn more about newton's 2nd  law please visit:

https://brainly.com/question/25545050

#SPJ4

If the balloon had a volume of 33000 L , how many kilograms of hydrogen were needed to fill the balloon at STP?

Answers

If a balloon has a volume of 33000 L, the amount of hydrogen that would be needed to fill will be 29.46 kg.

Volume of gas at STP

At standard temperature and pressure, 1 mole of any gas is equivalent to 22.4 L of the gas.

The capacity of the balloon is 33000 L. The number of moles of hydrogen gas that will fill the balloon can be calculated using dimensional analysis as follows:

1 mole = 22.4 L

33000 L = 1 x 33000/22.4

               = 1473.21 moles

This means that 1473.21 moles of hydrogen will be required to fill the balloon.

Recall that: mole = mass/molar mass

Hence: mass = mole x molar mass

Molar mass of hydrogen gas = (1+1)

                                                = 2 g/mol

We can then use the above formula to calculate the mass of 1473.21 moles of hydrogen.

mass of 1473.21 moles hydrogen = 1473.21 x 2

                                                       = 2946.43 grams

2946.43 grams to kg = 2946.43/1000

                                   = 29.46 kg

In other words, if a balloon has a capacity of 33000 L, the amount of hydrogen that would be required to fill it will be  29.46 kg.

More on the volume of gases at STP can be found here: https://brainly.com/question/28366842

#SPJ1

hat is the chemical symbol for magnesium?
Mo
Mn
Mg
Md

Answers

Answer:

The chemical symbol for Magnesium is Mg

Explanation:

As you can see on the periodic table Magnesium is in group two and has the element symbol of Mg

Hope this helps, have a great day!

how many unpaired electrons are in the oxygen atom? this atom is... a. paramagnetic ... b. diamagnetic

Answers

There are two unpaired electrons in O2. Hence, it is paramagnetic in nature with two unpaired electrons.

The term paramagnetic refers back to the appeal of material to an external magnetic discipline. The term diamagnetic refers to the repulsion of cloth from an external magnetic area. those substances have as a minimum one unpaired electron. these materials don't have any unpaired electrons.

Paramagnetic is the result of an unpaired electron having a magnetic dipole moment. QED dictates that the magnetic moment of an electron arises from its homes of spin and orbital movement, giving it angular momentum inside the quantum feel.

Paramagnetic materials are the ones which can be attracted by using magnetic area and feature impaired electrons. They lose magnetism within the absence of magnetic area. The greater the number of unpaired electrons, the greater the magnetic second of the substance and as a result extra the paramagnetism.

Learn more about paramagnetic here:- https://brainly.com/question/2272751

#SPJ4

2. what would happen to the rf if you left the tlc plate in the chamber for too long after the solvent reached the top? how does this affect the accuracy and precision of the rf value? (level 1)

Answers

If the TLC plate are left in the chamber for too long after the solvent reached the top the  [tex]R_{f}[/tex] value achieved from experimentation will be different than the expected [tex]R_{f}[/tex] .

What is [tex]R_{f}[/tex] value?

The value  [tex]R_{f}[/tex] is the ratio of the distance traveled by the solute to the distance traveled by the solvent. The term comes from chromatography when it was discovered that a particular component in a particular solvent always migrates the same distance under the same conditions.

In chromatography, the value of  [tex]R_{f}[/tex] is the basic requirement of the experiment. It indicates whether the analyte (solute) prefers the stationary or mobile phase. For stationary and mobile phases, the [tex]R_{f}[/tex]  value is used to determine polarity, relative mass, relative solubility, etc.

If the TLC plate is left in the development chamber for too long, solvent will flow to the top of the plate, causing unexpected migration of the chemicals coated on the silica plate. So the experimentally obtained value [tex]R_{f}[/tex] is different from the expected value

To know more about  [tex]R_{f}[/tex] value visit:

https://brainly.com/question/14393432

#SPJ4

the theoretical yield of a reaction is 75.0 g of product and the actual yield is 42.0 g. what is the percent yield?

Answers

The percent yield that we get is 56%.

Here it is given the actual yield is 42g and the theoretical yield is 75g

We have to find the percent yield.

Percent yield:

Percent yield is the percent ratio of actual yield to the theoretical yield. It is calculated to be the experimental yield divided by the theoretical yield multiplied by 100%. If the actual and theoretical yield ​is the same, the percent yield is 100%

Formula to calculate percent yield:

Percent yield = actual yield/ theoretical yield × 100

= 42 / 75 × 100

= 56%

Therefore the percent yield is 56%.

To know more about the percent yield refer to the link given below:

https://brainly.com/question/13005889

#SPJ4

when the amino acid glycine burns in a normal combustion reaction, the chemical equation is when this amino acid is burned by your body to obtain energy, the chemical equation is (enter your answer to three significant figures.) a question content area calculate the amount of heat produced when 8.76 g of glycine is burned in each reaction.

Answers

The normal combustion of 8.76 g of glycine produces 28.1 kcal while the combustion in the body produces  18.96 kcal.

What is the heat produced?

We know that a combustion reaction is one in which an object is burnt in oxygen. In this case, we have the reaction in which the amino acid is burnt both in oxygen (normal combustion) and the burning of glycine in the body also occurs.

In this case, we have the number of moles of the glycine that has participated in the reaction is; 8.76 g/75 g/mol = 0.12 moles

In the reaction that occurs  by normal combustion;

4 moles of glycine produces 936 kcal of energy

0.12 moles of glycine produces 0.12 moles * 936 kcal/4 moles

= 28.1 kcal

In the reaction that occurs in the body';

2 moles of glycine produces 316 kcal

0.12 moles of glycine produces 0.12 moles * 316 kcal/2 moles

= 18.96 kcal

Learn more about combustion of glycine:https://brainly.com/question/16873383

#SPJ1

Li = Li+ + e- oxidation or reduction?

Answers

Neutral lithium is oxidized and changed into Li+ at the anode. When the electrons from the anode reaction are received at the cathode, this causes the reduction of Co(IV) to Co(III).

What is the function of oxidation?

The biological aerobic system (BOD) of wastewater is decreased after oxidation, which also lessens some contaminants' cytotoxicity. Some contaminants undergo this treatment and are transformed into dioxide, water, and sludges. Disinfection is commonly accomplished using chemical oxidation.

What causes oxidation?

The reaction brought on by coming into touch with oxygen molecules is known as oxidation. These materials can be non-metals like live tissues or metals. Technically speaking, oxidation is the removal of one electrons during the phase of interaction between two or more atoms.

To know more about Oxidation visit:

https://brainly.com/question/16976470

#SPJ13

What does 2Na2O mean?

Answers

Sodium hydroxide and also sodium chloride

an ionic compound is made of 30.9% of cu, 13.6% si, and 55.5% f. a.what is the empirical formula of the anhydrous salt? b.1.00 gram of this compound is subject to high moisture environment. the resulting hydrate weighs 1.53 grams. what is the formula of the hydrate?

Answers

Empirical formula of the anhydrous salt is  CuSiF₆

The formula of the hydrate is CuSiF₆.6H₂O

What is empirical formula?

The molecular formula of a compound is the simplest integer ratio of the atoms present in the compound. As a simple example of this concept, the empirical formula for sulfur monoxide (SO) is simply SO, as is the empirical formula for Di-sulfur dioxide S₂O₂

Consider mass of Cu = 30.9 g

mass of Si = 13.6 g

mass of F = 55.5 g

Now for empirical formula, let's calculate the moles of each element:

Moles of Cu = 30.9/63.5=.49 moles

Moles of Si = 13.6/28.0=.49 moles

Moles of F = 55.5/19=2.92 moles

As you can see the moles of Cu and Si are almost 6 times the moles of F, which result in the empirical formula of salt as;  CuSiF₆

Now, for the formula of  hydrate:

Moles of CuSiF₆ = 1/205.62

= 0 .00486 moles

weight of H₂O = 1.53-1

= 0.53 g

Moles of H₂O = .53/18

= 0.029 moles

CuSiF₆ : H₂O = 0.00486 : 0.029

= 0.029/0.00486

= 1:6

So the molecular formula of hydrate is CuSiF₆.6H₂O

To know more about empirical formula visit:

https://brainly.com/question/14044066

#SPJ4

how many grams of glucose (c6h12o6) are in 4.9 moles of glucose? report your answer to the nearest 1 g.

Answers

The answer is 0.0055 grams of glucose (c6h12o6) are in 4.9 moles of glucose

The formula weight is a quantity calculated in chemistry by multiplying each element's atomic weight (measured in atomic mass units) by the number of atoms it has in the formula, and then adding up the results. Sometimes referred to as equation weights, these relative weights computed from the chemical equation. This is how isotropically weighted averages are used to get the molar mass(of glucose) (average molecular weight). This differs from molecular mass, which is the weight of a single molecule made up of distinct isotopes.

learn more about atomic weight here:

https://brainly.com/question/19756221

#SPJ4

Assignment: Identifying Types of Reactions
35 Points

Answers

1. Combustion reaction

2. Single displacement reaction

3. Neutralization reaction

4. Synthesis reaction

5. Decomposition reaction

6. Synthesis reaction

Types of reactions

There are different types of chemical reactions. The type of reaction that corresponds to each chemical equation as shown in the image respectively are:

Combustion reaction: where substances burn in oxygen. In this case, the substance is a hydrocarbon and the products are carbon dioxide and water.Single displacement reaction: where an atom displaces another atom from a compound. In this case, Ca is displacing Mg from [tex]Mg(NO_2)_3[/tex]Neutralization reaction: a reaction involving an acid and a base to yield salt and water. Here, KOH is the base while HBr is the acid. KBr is the salt that is formed.Synthesis reaction: a reaction in which two or more atoms or molecules of atoms come together to form a compound. In this case, Na and O are the atoms.Decomposition reaction: where a compound breaks down into two or more smaller compounds or atoms. Here, MgO decomposes to Mg and O.Synthesis reaction: K and Cl combine to form KCl.

More on types of reactions can be found here: https://brainly.com/question/14203092

#SPJ1

which statements collectively explain why radical bromination of 2-methylpentane selectively gives the product shown? select all that apply.

Answers

The statements that collectively explain why radical bromination of 2-methyl pentane is

the rate-determining step is endothermic, and so the most stable alkyl radical forms fastest.The product shown arises from the most stable radical intermediateThe rate-determining step in the reaction is abstraction of a hydrogen atom from 2-methylpentane

So the correct option are A, C, and D.

What is radical bromination?

Radical Bromination is described as a process in which a free-radical chain mechanism introduces bromine into a molecule.

The bromine radical removes a hydrogen atom from the methane and because the hydrogen atom only needs to bring one electron with it to form a new bond to the bromine, and so one electron is left behind on the carbon atom.

In the creation of radicals, if  bromine (Br2) is treated with light (hν) it comes to hemolytic cleavage of the Br-Br bond.

Learn more about radical bromination at: https://brainly.com/question/20372187

#SPJ1

Complete question:

Which statements collectively explain why radical bromination of 2-methylpentane selectively gives the product shown? select all that apply.

a. the rate-determining step is endothermic, and so the most stable alkyl radical forms fastest.

b. the rate-determining step is exothermic, and so the least stable alkyl radical forms fastest.

c. The product shown arises from the most stable radical intermediate

d. The rate-determining step in the reaction is abstraction of a hydrogen atom from 2-methylpentane

e. The rate-determining step in the reaction is addition of a hydrogen atom from 2-methylpentane

14.55ml of 0.3674 m naoh was required to neutralize 25.00 ml of hcl with an unknown concentration. what was the concentration of the hcl solution in the units of mol/l?

Answers

14.55ml of 0.3674 m NaOH was required to neutralize 25.00 ml of HCl with an unknown concentration.  the concentration of the HCl solution in the units of mol/l  is 0.212 mol / L.

given that :

volume V1 = 14.55 mL = 0.0145 L

Molarity M1 = 0.3674 M

Volume V2 = 25 mL = 0.025 L

molarity M2 = ?

using the formula for dilution , we get ;

M1 V1 = M2 V2

0.3674 × 0.0145 = M2 × 0.025

M2 = 0.0053 / 0.025

M2 = 0.212 M = 0.212 mol / L

Thus, 14.55ml of 0.3674 m NaOH was required to neutralize 25.00 ml of HCl with an unknown concentration.  the concentration of the HCl solution in the units of mol/l  is 0.212 mol / L.

To learn more about molarity here

https://brainly.com/question/8732513

#SPJ4

The addition of 3. 15 g of ba(oh)2*8H2O to a solution of 1. 52 g of NH4SCN in 100 g of water in a calorimeter caused the temperature to fall by 3. 1 C. Assuming the specific heat of the solution and products is 4. 20 J/g C, calculate the approximate amount of heat absorbed by the reaction, which can be represented by the following equation:

Answers

A solution of 1.52 g of NH4SCN in 100 g of water in a calorimeter decreased in temperature by 3.1 °C when 3.15 g of Ba(OH)28H2O was added. Calculate the approximate amount of heat absorbed by the reaction using the following equation, assuming the specific heat of the solution and products is 4.20 J/g °C:

Ba(OH)2 + 8H2O + 2NH4SCN = 10H2O + Ba(SCN)2(aq), 2NH3(aq), and (l)

What is Absorbed ?

A material in one state is transferred into another substance in a different state through the process of absorption in chemistry (e.g., gases being absorbed by a liquid or liquids being absorbed by a solid).

The process of absorption is how the blood takes in the byproducts of digestion so that it can supply the rest of the body. The mucous membrane allows for the passage of the digested materials into the blood or lymph during absorption. The following mechanisms allow for absorption. basic diffusion

To know more about Absorbed please click here ; https://brainly.com/question/8828503

#SPJ4


Determine the empirical formula for aspirin. It contains 60.0% C, 4.44% H and 35.56% O.

Answers

Aspirin is the sector's most regularly used medicinal drug. The chemical analysis of aspirin indicates that the molecule is 60.00% carbon, 4.44% hydrogen, and 35.56%.

Empirical records.relying on revel in or commentary by myself regularly with out due regard for system and theory. an empirical basis for the idea. Empirical research is primarily based on found and measured phenomena and derives information from actual revel in in place of from principle or perception.

An instance of empirical evaluation might be if a researcher changed into inquisitive about locating out whether or not paying attention to satisfied music promotes prosocial behaviour. An experiment might be carried out where one organization of the target audience is uncovered to happy song and the other isn't always uncovered to track at all.

A element is proof for a proposition if it epistemically supports this proposition or suggests that the supported proposition is authentic. evidence is empirical if it's miles constituted by or available to sensory revel in.

Learn more about empirical here:-

https://brainly.com/question/4822928

#SPJ1

Which two geologic events occur very slowly as a result of tectonic forces and movement?
A.Convection in the mantle
B.Earthquakes
C.Plate subduction
D.Formation of volcanoes

Answers

The two geologic events which occur very slowly as a result of tectonic forces and movement are convection in the mantle and plate subduction.

What is Subduction?

This is a term which is referred to as the process in which there is collision between two of Earth's tectonic plates, where one plate sinks into the mantle underneath the other plate.

This is caused by geologic events which occur very slowly as a result of tectonic forces while on the other hand, mountains and volcanoes occur abruptly which is therefore the reason why options A and C were chosen as the correct choice.

Read more about Subduction here https://brainly.com/question/1358208

#SPJ1

Answer: A and C

Explanation:


Can someone please answer these questions for me ??

Answers

a. NaNO3 and PbCl2
b. 2NaCl and FeCO3
c. BaSO4 and 2NaBr
d. AgI and MgNO3
e. NaClO4 and Ni3(PO4)2

Use double replacement pattern.

A + B = C+ D

AD + CB

suppose you need to prepare 100. ml of a solution with the 6.0 mg/l concentration of a dye and what you have is a 30. mg/l stock solution of the dye and pure water. what amounts of the liquids should be mixed?

Answers

To prepare 100ml of a solution with the 6.0mg/l concentration of a dye and you have a 30 mg/l stock solution of the dye and pure water, 20 ml of pure water should be mixed.

Solutions are made diluting more concentrated stock solutions.certain volume of the stock solution is transferred to a new container and is brought to a new volume.since, the total volume of solute is the same before and after dilution.

                      C0 V0  =  CdVd

            Where, C= concentration of stock solution

                         V= diluted volume of the stock solution

                          C= concentration of diluted solution

                         V= volume of the diluted solution

Here putting the values,

              30 mg/l * vo   = 6.0 mg/l  * 100ml

   

               VO =  20ml

To learn more about stock solution please visit:

https://brainly.com/question/3942978

#SPJ4

     

which one of the following best describes the difference between molar mass and formula weight? a) formula weights are measured in grams per mole, while molar masses are measured in atomic mass units. b) a formula weight is the mass of one molecule or formula unit while a molar mass is the mass of one mole of molecules or formula units. c) molar masses only describe the mass of ionic compounds, while formula weights can describe any compound. d) there is no difference between molar masses and formula weights.

Answers

The following best describes the difference between molar mass and formula weight is a formula weight is the mass of one molecule or formula unit while molar mass  is the mass of one mole of molecules or formula units.

A formula mass is the sum of all masses of atom present in empirical formula. molecular mass is the mass of one mole of molecule. formula weight base on empirical formula while molecular mass is depend on molecule.

Thus, The following best describes the difference between molar mass and formula weight is a formula weight is the mass of one molecule or formula unit while molar mass  is the mass of one mole of molecules or formula units.

To learn more about formula weight and molar mass here

https://brainly.com/question/24727547

#SPJ4

1. you suddenly notice you have forgotten to add boiling stones to your round bottomed distillation flask but the distillation is now in progress. what should you do? explain why.

Answers

Answer:

Boiling stones should never be added to a hot liquid because that would cause the liquid to boil very fiercely. Now that the distillation is already in progress, first you have to cool down the solution.

Explanation:

When you have forgotten to add boiling stones to your round bottomed distillation flask, but now the distillation is in progress. You should not add boiling stones to the hot liquid, because that can cause that hot liquid to boil fiercely. So, you have to cool down that liquid first and then add boiling stones.

But if you do not add boiling stones in this process, it produces hot spots, which causes splashing out. So, you have to cool down the solution/reaction and then reheat the solution after adding boiling stones.

Learn more about distillation from:

https://brainly.com/question/15946045

#SPJ4

5. describe a process in which 2 substances that are mixed together can be separated from each other. would this be a physical change or a chemical change? provide an explanation for your answer.

Answers

When two compounds are combined and change into a third substance, this is referred to as a biochemical reaction (or chemical reaction). When two substances are combined, not all of them react chemically.

How does chemical change?

When one chemical material changes into one or more others, as when iron rusts, this is referred to as a chemical transformation. Chemical reactions produce changes in the way that molecules and atoms are ordered, which leads to the formation of new substances with new properties.

Describe a chemical example:

Examples for chemicals include the basic building blocks, such as zinc, nitrogen, and oxygen; combinations created from these building blocks, such as water, dioxide, or salt; and more complicated substances, such as the air you breathe, rainfall, a chicken, a car, etc.

To know more about chemical change visit:

https://brainly.com/question/23693316

#SPJ4

what are the ain properties of carbon that explains its presence as a base element of organic compounds

Answers

Properties of carbon that explain its presence as a basic element of organic compounds - Catenation and Tetravalent.

Carbon is a chemical element with the symbol C and atomic number 6 (it contains 6 protons in its nucleus). As a member of group 14 in the periodic table, it is non-metallic and tetravalent – ​​making four electrons available to form covalent chemical bonds.

The most common isotope of carbon has 6 protons and 6 neutrons and has an atomic mass of 12.0107 AMU. Its basic electronic configuration is 1s22s22p2.

Properties of carbon that explain its presence as a basic element of organic compounds -

Carbon has the ability to form very long chains of strong and stable interconnecting C-C bonds. This property, called catenation allows carbon to form an almost infinite number of compounds.

Carbon has an affinity for bonding with other small atoms, including other carbon atoms, through the formation of stable covalent bonds. Despite the fact that it is present in a huge number of compounds, carbon is weakly reactive compared to other elements under normal conditions.

To know more about carbon here:

https://brainly.com/question/14760667

#SPJ4

 

a solution containing a large concentration of dissolved ions can be classified as a(n) . a solution containing a large concentration of dissolved ions can be classified as a(n) . solvent weak solution electrolyte unsaturated solution suspension

Answers

An electrolyte is a solution containing a large concentration of dissolved ions.

A solution containing a large concentration of dissolved ions is called an electrolyte. It mainly consists of dissolved cations ,anions. Some of the most important and commonly discussed electrolytes are

Calcium which plays a pivotal role in bone health in the body and muscle contraction and relaxation.

Sodium, which is responsible for maintaining osmolarity and nerve impulse conduction, the lack of sodium ions in the body may lead to Hyponatremia.

Potassium is another important electrolyte which is responsible for normal heart function and skeletal growth.

Chloride ions which are in close coordination with sodium ions in the body help in maintenance of the body's blood pressure. It can be obtained from tomatoes, olives, etc.

The shortage of these electrolytes in the body can cause physiological problems like tiredness, lethargy, sleeplessness and improper growth in case of children. Hence it is crucial for us to include all the electrolytes in our diet and have foods that are rich in water and electrolytes to stay healthy and fresh.

To learn more about Electrolytes visit

https://brainly.com/question/28699046

#SPJ4

hydrochloric acid reacts with many metals to form hydrogen gas and the corresponding metal chloride. if you needed to produce hydrogen gas as a source of fuel, and given a choice of na, mg, al, or zn as the metal, which one would you choose to maximize the amount of hydrogen gas produced per gram of metal?

Answers

Magnesium would be chosen to produce the hydrogen gas .

What is Chemical reaction ?

There are chemical reactions taking place all around us. Nothing could be further from the reality, despite the fact that we occasionally link chemical processes with the sterile surroundings of the test tube and the lab. A staggering, nearly incomprehensible variety of new substances and energy changes actually result from the enormous number of alterations that occur in our environment every second of every day.

Chemical reactions happen whether or not you want them to in nature, where they can be considerably less controlled than in a lab. They can also be more messier. Whether it be a forest fire that is blazing.

To know more about the chemical reaction ,click the link given ;

brainly.com/question/11231920

#SPJ4

what is the molarity of a solution that contains 50.0 grams of sodium hydroxide, naoh, in 855 ml of solution?

Answers

The molarity of the solution is 1.46M

What mass of hydrogen is produced when 195mg of potassium is added to water?

Answers

The mass of hydrogen that will be produced when 195 mg of potassium is added to water would be 5 mg.

Stoichiometric problem

From the balanced equation of the reaction:

[tex]2K + H_2O --- > 2KOH + H_2[/tex]

The mole number of the potassium that reacts to the mole of the hydrogen gas that is produced is 2:1.

If 195 mg of potassium reacts:

1 mg = 0.001 g

195 mg = 195 x 0.001

            = 0.195 g

Recall that: mole = mass/molar mass

Molar mass of potassium = 39 g/mol

mole of 0.195 g potassium = 0.195/39

                                             = 0.005 mol

From the stoichiometric mole ratio, the equivalent mole of hydrogen gas produced would be:

       0.005/2 = 0.0025 mol.

Molar mass of hydrogen gas = 2 g/mol

Mass of 0.0025 hydrogen gas = 0.0025 x 2

                                                   = 0.005 g

0.005 g = 0.005 x 1000

             = 5 mg

This means that 0.005 g or 5 mg of hydrogen gas will be produced when 195 mg of potassium is added to water.

More on stoichiometric problems can be found here: https://brainly.com/question/28297916

#SPJ1

short note on sodium permutit​

Answers

Explanation:

permutit is an artificial zeolite chemically it is

hydrated sodium aluminum orthosilicate with the formula

Na2AI2Si208. XH20

Other Questions
can yall help me please Does the point (-2, 7) lie on the graph of y=-2x+1?yesno Analyze why the trade empires in the Indian Ocean region succeed while the Ottoman, Safavid, and Mughal Empires declined. if you made a change in the promoter sequence in the dna that inactivates the promoter, what would happen at the rna level? group of answer choices nothing, the rna would be made as usual. the mutation of the dna would be carried through to the rna sequence. At 0.08 blood alcohol concentration you are Identify the allele that is expressed in a heterozygous individual. all of these factors contributed to the rise of nationalism in the 18th and early 19th centuries except the group of answer choices spread of printed material. replacement of latin with modern languages. secularization of societies. napoleonic wars. u.s. civil war. what is the smallest positive integer $n$ such that the rightmost three digits of $n!$ and $(n 1)!$ are the same? Dog food comes in two different sized bags. The 4 lb bag sells for $19.49 while the 30 lb bag sells for $73.99. Which is cheaper per pound and by how much? ser igualitario es estar a favor o en contra de la igualdad absoluta? what is one major difference between federal and unitary governments you have an enzyme solution and you add an inhibitor molecule and observe a marked decrease in enzyme activity. you increase the substrate concentration but this does not lead to any observable increase in enzyme activity. what can you conclude about your inhibitor? Please help! Find the amount of money( future value) in an account where 8,800 is deposited ( present value) at an interest rate 6.5% per year compounded continuously and the money is left in the account for 7 years.The final amount is $ ?Round your answer to 2 decimal places. Which one of the following terms applies to the amount of money required when a futures position is first bought or sold?A. original depositB. initial marginC. spot marginD. equity depositE. mark-to-market HELPPPP MEEEEE PLEASE!!!! How is the introduction of an essay like a map? what is the primary difference between the oxidation of glucose to co2 by glycolysis and the citic acid cycle vs by the pentose phosphate 1. _______________ the time between signals sent from the same presynaptic terminal increases the strength of the graded potential. This is an example of ________________ summation. blair works in the marketing department for a large electronics firm. he is currently trying to determine how his firm is performing relative to the other electronics firms in the industry. which marketing metric would blair use to do this? A= (a+b+c+d)/4 solve for b