The acceleration due to gravity would be 5.95 m/s²
A force is known to be a push or pull and it is the change in momentum per time. It can be expressed by using the relation.
Force = mass × acceleration.From the parameters given:
Mass = 105 kgForce = 625 NBy replacing the given values into the above equation, we can determine the acceleration.
∴
625 N = 105 kg × acceleration.
[tex]\mathbf{acceleration = \dfrac{625 \ N}{105 \ kg}}[/tex]
acceleration = 5.95 N/kg
Since 1 N/kg = 1 m/²acceleration = 5.95 m/s²
Learn more about acceleration(a) here:
https://brainly.com/question/14344386
The mass of a car is 625kg. Calculate the weight of the gravitational field strength is 10 N/kg.
Ans: 62.5
Explanation: [tex]F{net}[/tex] = m x a
1N = 1kg x 1m/ [tex]s{2}[/tex]
Which is true of gamma radiation? O A. It increases the number of protons. O B. It is the heaviest of the three types. O C. It does not cause transmutation. O D. It has a positive charge.
Answer: Your answer Is A)
Explanation:
Its direction of deflection shows it possitively charged
It brings one element into another by bombardment(transmutation)
Which is an electromagnetic wave A. The waves that heat a cup of water in a microwave oven B. A flag waving in the wind C. Turning on a flashlight D.The changes in the air that result from blowing a horn
Answer:
The answer would be A. The waves that heat a cup of water in a microwave oven
When a low-pressure gas of hydrogen atoms is placed in a tube and a large voltage is applied to the end of the tube, the atoms will emit electromagnetic radiation and visible light can be observed. If this light passes through a diffraction grating, the resulting spectrum appears as a pattern of four isolated, sharp parallel lines, called spectral lines. Each spectral line corresponds to one specific wavelength that is present in the light emitted by the source. Such a discrete spectrum is referred to as a line spectrum.
What is the wavelength of the line corresponding to n =4 in the Balmer series? Express your answer in nanometers to three significant figures. EVO AV Om ? X (n) = 4.86.10? By the early 19th century, it was found that discrete spectra were produced by every chemical element in its gaseous slale. Even though these spectra were found to share the common feature of appearing as a set of isolated lines, it was observed that each element produces its own unique pattern of lines. This indicated that the light emitted by each element contains a specific set of wavelengths that is characteristic of that element. Submit Previous Answers Request Answer X Incorrect; Try Again; 19 attempts remaining
Answer:a) λ = 4.862 10⁻⁷ m, b) λ = 4.341 10⁻⁷ m
Explanation:
The spectrum of hydrogen can be described by the expression
in the case of the initial state n = 2 this series is the Balmer series
a) Find the wavelength for n = 4
let's calculate
= 1,097 10⁷ ()
\frac{1}{ \lambda} = 1.097 10⁷ 0.1875 = 0.2056 10⁷
λ = 4.862 10⁻⁷ m
b) n = 5
\frac{1}{ \lambda} = 1,097 10⁷ ()
\frac{1}{ \lambda} = 1.097 10⁷ 0.21 = 0.23037 10⁷
λ = 4.341 10⁻⁷ m
Help me outttt pls and thanks
2. The system shown is accelerated by applying a tension Ti to the right-most cable. Assume the system is
frictionless. Solve for the tension in the cable between the blocks, T2, in terms of T. (not a).
The tension in the cable between the blocks, T₂, is [tex]\frac{2T_i}{7}[/tex]
The given parameters:
Mass of the first block, = 2 kgMass of the second block, = 5 kgThe net force on the block system is calculated by applying Newton's second law of motion as follows;
Total mass of the block-system = 2 kg + 5 kg = 7 kg
The acceleration of the block-system;
[tex]a = \frac{T_i}{7}[/tex]
The tension in the cable between the blocks, T₂, is calculated as;
[tex]T_2 = m_2 a\\\\T_2 = 2a\\\\T_2 = 2 \times \frac{T_i}{7} \\\\T_2 = \frac{2T_i}{7}[/tex]
Thus, the tension in the cable between the blocks, T₂, is [tex]\frac{2T_i}{7}[/tex].
Learn more about acceleration of two connected block systems here: https://brainly.com/question/25939890
AP Physical problem the wording is really throwing me off and im totally lost on how to do this. I would love some help please and thank you!
Explanation:
a) Here is the free-body diagram. Note that I included the components of the weight mg (shown in dotted arrows) for use in the other parts of the problem.
b) The component of the weight parallel to the plane (shown in the diagram as a dotted arrow along the x-axis) is [tex]mg\sin15[/tex] and it is equal to
[tex]mg\sin15 = (25\:\text{kg})(9.8\:\text{m/s}^2)\sin15 = 63.4\:\text{N}[/tex]
c) Applying Newton's 2nd law to the y-axis, we can write
[tex]y:\;\;\;N - mg\cos15 = 0 \Rightarrow N = mg\cos15[/tex]
[tex]N = (25\:\text{kg})(9.8\:\text{m/s}^2)\cos15 = 236.7\:\text{N}[/tex]
d) The component of the weight mg into the plane is the same as the normal force, hence it's also 236.7 N.
e) To solve for the coefficient of friction, we apply Newton's 2nd law to the x-axis:
[tex]x:\;\;\;mg\sin15 - F_f = 0[/tex]
[tex]\Rightarrow F_f = mg\sin15\;\;(2)[/tex]
where [tex]F_f[/tex] is the frictional force defined as [tex]F_f = \mu N[/tex] so we can use Eqn(1) on Eqn (2) to write
[tex]\mu (mg\cos15) = mg\sin15[/tex]
Solving for [tex]\mu,[/tex] we get
[tex]\mu = \dfrac{\sin15}{\cos15} = \tan15 = 0.27[/tex]
Fireworks have a very high reaction rate. Describe and explain what could be done to slow down their reaction.
Answer:
Don't light up the firework or put less fire
Explanation:
Using Pharaoh's serpent or "black snake" firework could be done to slow down their reaction.
What are fireworks chemically?Gunpowder is typically made using three reagents: potassium nitrate, carbon, and Sulphur. These kinds of elements are used in a combustion reaction that results in this detonation explosion. You have solid reagents reacting to produce gases in the form of solid potassium carbonate, solid potassium sulphate, nitrogen gas, and carbon dioxide gas.
The numerous metal salts that are added to produce the colours spread out all of that material, which is in a super-heated state. In such extremely intense environment, the metal salts heat up and get "excited," emitting light as a result.
If you want an explosion, you need the chemical reaction to go quickly in order to release a large volume of gas in a brief period of time. You might have a chemical reaction that happens rather slowly, like the Pharaoh's serpent or "black snake" firework.
Find more about fireworks in the link:
https://brainly.com/question/16737516
#SPJ2
Please respect! Can you answer this for me?
Answer:
ıf u find the answer can u comment me to notification thank u
Explanation:
Just like our bodies, Earth's cycles tend to maintain a balance or equilibrium .
Can someone help me with this problem?
Answer:
no
Explanation:
u flipped it i cant see
Calculate the net force acting on a body of mass 20 kg moving with a
uniform velocity of 4 ms-1.
Answer:
0 N
Explanation:
Uniform velocity means no acceleration and therefore no net force.
a plane crashes with a deceleration of 185 m/s. How many g’s is this?
Answer:
26 g's
Explanation:
Hope this helps~
Have a great day
Zero
A gazelle is grazing while standing in a fixed location. When it's startled by a predator, the gazelle accelerates uniformly for 16.8 s until it reaches a speed of 21.9 m/s. The gazelle then runs in a straight line at constant speed for an additional 16.4 s. Finally, it uniformly slows to a stop at a rate of 1.8 m/s/s. What is the total distance traveled by the gazelle in meters
Answer:
Explanation:
acceleration phase
average speed was 21.9/2 = 10.95 m/s
distance covered is 10.95 m/s(16.8 s) = 183.96 m
distance at top speed 21.9 m/s(16.4 s) = 359.16 m
distance while decelerating (0² - 21.9²)/(2(-1.8)) = 133.225 m
total = 183.96 + 359.16 + 133.225 = 676.345 = 676 m
An elephant has a mass of 55,000 kg. What is the elephant’s weight on Saturn (g= 10.4)?
Answer:
Explanation:
F = ma
F = 55000 kg(10.4)
F = 572000 N
That is an amazingly large elephant, more like 11 elephants
A more typical mass for a single elephant would be 5000 kg with a weight on Saturn of 52000 N
SOMEONE PLEASE HELP MEEEEEEE
Answer:
Weathering and erosion
Explanation:
A body is moving along a circular path with variable speed, it has both radial and tangential acceleration.
Select one:
True
False
Answer:
True; ar = v^2 / R Radial acceleration because it moves in a circular path
at = α R = tangential acceleration because its speed changes
a = at + ar total acceleration equals sum of radial and tangential
______ uses radioactive materials to create contrast in the body and help form images of the structure and function of organs.
Answer:
Nuclear medicine or PET scanning (Positron Emission Tomography)
Explanation:
Not super sure what your question is looking for but I think it can be either. PET is a technology used in the nuclear medicine field, and nuclear medicine is a broad field of using the technology the question described.
What are the two fundamental ways energy and momentum are moved from one place to another?
The two fundamental ways energy and momentum are moved from one
place to another are through the mass and velocity.
The formula for momentum is mass multiplied with velocity.
Momentum= mass × velocity
The two factors in which momentum and energy is moved from one place to
another is however through how much and how fast the object is moving
which validates the answer.
Read more on https://brainly.com/question/1042017
As the amount of charge on either of two charged objects increases, the electric force between the objects decreases.
O True O False
Answer:
False.
Explanation:
provided the distance between the forces remains the same, the force will increase with increased charge, whether attractive or repulsive.
How does an emergency action plan benefit your workplace
A fan blade Spins at 3,000 revolutions per minute.
How
many degrees does it rotate in one second?
18,000 degrees in one second i believe
A 1.95 kg box sits on an incline of 24 ° with the horizontal. If the box accelerates down the incline at 0.245 m/s 2 , what is the coefficient of kinetic friction between the box and the inclined plane?
Answer:
Explanation:
F = ma
mgsinθ - μmgcosθ = ma
gsinθ - μgcosθ = a
μgcosθ = gsinθ - a
μ = (gsinθ - a) / gcosθ
μ = (9.81sin24 - 0.245) / 9.81cos24
μ = 0.4178906...
μ = 0.418
The coefficient of kinetic friction will be equal to 0.418.
What is friction?Friction is the force that prevents solid surfaces, fluid layers, and material elements from sliding against each other. There are various kinds of friction: Dry friction is the force that opposes the relative lateral motion of two in-touch solid surfaces.
Given that a 1.95 kg box sits on an incline of 24 ° with the horizontal. If the box accelerates down the incline at 0.245 m/s 2
The coefficient of kinetic friction will be calculated as,
F = ma
mgsinθ - μmgcosθ = ma
gsinθ - μgcosθ = a
μgcosθ = gsinθ - a
Solve for the value of the coefficient of friction,
μ = (gsinθ - a) / gcosθ
μ = (9.81sin24 - 0.245) / 9.81cos24
μ = 0.4178906...
μ = 0.418
Therefore, the coefficient of kinetic friction will be equal to 0.418.
To know more about the coefficient of friction follow
https://brainly.com/question/29719172
#SPJ2
A wheel with radius 41.5 cm rotates 5.13 times every second.
Find the period of this motion.
What is the tangential speed of a wad of chewing gum stick to the rim of the wheel?
The tangential speed of a wad of chewing gum to the rim of the wheel is approximately 1337.659 centimeters per second.
Let suppose that the wheel rotates at constant angular speed ([tex]\omega[/tex]), in radians per second, the tangential speed of a wad of chewing gum to the rim of the wheel ([tex]v[/tex]), in centimeters per second, is:
[tex]v = 2\pi\cdot r\cdot f[/tex] (1)
Where:
[tex]r[/tex] - Radius of the wheel, in centimeters[tex]f[/tex] - Frequency, in hertzIf we know that [tex]f = 5.13\,hz[/tex] and [tex]r = 41.5\,cm[/tex], then the tangential speed of the chewing gum is:
[tex]v = 2\pi\cdot (41.5\,cm)\cdot (5.13\,hz)[/tex]
[tex]v \approx 1337.659\,\frac{cm}{s}[/tex]
The tangential speed of a wad of chewing gum to the rim of the wheel is approximately 1337.659 centimeters per second.
To learn more on angular speed, we kindly invite to check this verified question: https://brainly.com/question/9684874
Question 2 of 25
If JKLM is a parallelogram, what is the length of LM?
K
18
8
M
O A. 10
O B. 18
O C. 8
D. 26
SUBMIT
Answer:its 10
Explanation:
Answer:
8
Explanation:
When a hot metal cylinder is dropped into a sample of water, the water molecules
Answer:
I believe the answer is speed up.
Explanation:
this is because when water heats up the molecules move father apart from each other they speed up, eventually causing the water to boll
A roller coaster starts from rest at its highest point and then descends on its (frictionless) track. Its speed is 38 m/s when it reaches ground level. What was its speed when its height was half that of its starting point
Explanation:
look !
speed= 38m/s
start from rest= 0
If you have to measure the temperature > above 80°c, do you use an alcohol or mercury thermometer? why?
Answer:
I use mercury thermometer to measure the temperature above 80°C because the boiling point of alcohol is 78°C . So, it can't measure the temperature above 78°C.
A solid, uniform sphere with a mass of 2.5 kg rolls without slipping down an incline plane starting from rest at a vertical height of 19 m. If the sphere has a radius of 0.60 m, what is the angular speed of the sphere at the bottom of the incline plane
Answer:
1/2 m v^2 + 1/2 I ω^2 = m g h conservation of energy
I = 2/5 m R^2 inertia of solid sphere
1/2 m v^2 + 1/5 m ω^2 R^2 = m g h
1/2 v^2 + 1/5 v^2 = g h
v^2 = 10 g h / 7 = 1.43 * 9.80 * 19 m^2/s^2 = 266 m^2/s^2
v = 16.3 m/s
v = R ω
ω = 16.3 / .6 = 27.2 / sec
The density of water is 1000 kg/m the pressure pf water at 10 m depth is about
Answer:
pressure in liquids is given as:
P= hpg
where h is the depth
where p is the density
where g is 10
Explanation:
From the formula above
p = 10 X 1000 X 10
p = 100000N/m