To find the collision rate, known the magnitude.
What is magnitude?
Magnitude typically refers to size or distance. By comparing the size and motion speed of the thing, we can relate magnitude to movement. The object's or quantity's size determines its magnitude.
What is mean by collision rate?
The frequency of collisions between a single particle of radius m and particles with masses ranging from (m1, m1 + m1) to (m, m1) is proportional to their concentration, n(m1) m1, where (m, m1) is the rate constant for collisions between the two particles of masses m and m1 and depends on the process.
u=140kmph
t=7.oms
v=0
E=M(V-U)/t
⇒m(0-140)/0.007×5/18m/s
⇒5555.55 (m) N
E=(5555.55) (mass) N
Therefore, the collision lasts is 5555.55(m) N.
Learn more about magnitude from the given link.
https://brainly.com/question/24569005
#SPJ4
what is the average magnitude of the poynting vector 5.00 mi from a radio transmitter broadcasting isotropically (equally in all directions) with an average power of 250 kw?
307.4 μW/m² average magnitude of the poynting vector 5.00 mi with an average power of 250 kw?
S-average=power/area
power=250 kw
area=4π(8045)²
S-average=250/4π(8045)²
S-average=307.4 μW/m²
Power is produced when a force causes a displacement. Power has no bearing on how long it takes for a force to cause a displacement. The process's pace might range from swiftly concluding to taking some time. For example, it takes an abnormally long time for a rock climber to elevate her body a few meters over the cliff's edge. On the other hand, a trail hiker may swiftly raise her body a few meters if she selects the faster path up the mountain. Despite making the same amount of work, the hiker completes the task far quicker than the rock climber..
To know more about power visit : brainly.com/question/11800127
#SPJ4
the airplane in the image below is flying horizontally (parallel to the ground) with a velocity of 65.0 m/s and an altitude of315 m when it releases a care package. if we ignore air resistance, how far (measured in meters)will the package travel along the horizontal,x-dimension (range) before hitting the ground?
The package travel along the horizontal 516.1 m before hitting the ground.
When an object was released from a plane with a constant speed, the object also has a gravity force. So the object has a projectile motion.
Along the x-axis, the object gets uniform velocity.If the problem didn't give the magnitude of the acceleration due to gravity, we can assume it's 10 m/s².
Calculate elapsed time.
[tex]h = \frac{1}{2} gt^2[/tex]
[tex]315 = \frac{1}{2} \times 10 \times t^2[/tex]
315 = 5 × t²
[tex]t^2 = \frac{315}{5}[/tex]
t² = 63
[tex]t = \sqrt{63}[/tex]
t = 7.94 s
Calculate the displacement.
d = uₓ × t
d = 65.0 × 7.94
d = 516.1 m
Learn more about
Projectile motion here: https://brainly.com/question/24888457
#SPJ4
1. If you wanted to make a piece of silk fabric become negatively charged, what might you rub it with? Explain your reason.
2. If you wanted to make a piece of silk fabric become positively charged, what might you rub it with? Explain your reason.
The silk can get a negative charge if it is rubbed against iron rod and it can get a positive charge if it is rubbed against hair.
How to make charges?We know that a charge is made when there is either an excess or a deficit of electrons. When there is an excess of the positive charge on an object, we can say that the object ha become positively charged. If there is an excess of negative charges, we can say that the material is negatively charged. We now want to determine how we could make silk to become positively or negatively charged.
If we want the silk to have a negative charge then we have to rub the silk with a glass rod. If the silk is rubbed with a glass rod, what would happen is that electrons would be transferred from the rod to the silk leaving the silk with a negative charge.
If you want the silk to have a positive charge, you could rub it against hair. In that way, the hair would get an negative charge while excess electrons are transferred to the silk making it to have a positive charge.
Learn more about charges:https://brainly.com/question/9201910
#SPJ1
A polar bear walks 40 meters North, then 20 meters East , then 40 meters south. The bear completes his trip in 10 seconds. what is the bear's total distance traveled ?
The total distance travelled is 100 m.
What is the total distance traveled ?We know that distance is a scalar quantity. Let us note that scalar quantities are the quantities that do not have a direction rather they do have magnitude. This is where the vector is different from the scalar quantity in physics.
Looking at this description, we are told that the polar bear walks 40 meters North, then 20 meters East , then 40 meters south. We can see that the total distance can be obtained by the addition of all the distances travelled.
Total distance travelled is; 40 + 20 + 40 = 100 m
Learn more about total distance:https://brainly.com/question/6516113
#SPJ1
a 22.0 kg child is riding a playground merry-go-round that is rotating at 40.0 rev/min. what centripetal force must she exert to stay on if she is 0.891 m from its center? (hint: it's more than double her weight).
342.5 N of force must she exert to stay on if she is 0.891 m from its center while 22.0 kg child is riding a playground merry-go-round that is rotating at 40.0 rev/min
Since we are given the mas of the child which is 22.0 kg and the number of revolutions which is 40.0 rev/min which will be :
n=2*3.14 *40.0 /60 = 4.18 radians/s
and the distance from the center is 0.891 m( r). The formula we are referring to calculates the centripetal force :
F= m(n)²* r
=22(4.18)²*0.891
= 342.49 = 342.5 N
to know more about centripetal force refer to the link https://brainly.com/question/11324711?referrer=searchResults.
#SPJ4
what physical feature of mars is atypical compared with the other terrestrial planets? what physical feature of mars is atypical compared with the other terrestrial planets? its size its rotation rate its atmospheric content its density its surface composition
The answer of this is "Its surface composition"
Mars is the fourth planet from the Sun and the next planet beyond Earth. It is, on average, more than 142 million miles from the Sun.
Its surface is rocky, with canyons, volcanoes, dry lake beds and craters all over it. Red dust covers most of its surface. Mars has clouds and wind just like Earth. Sometimes the wind blows the red dust into a dust storm. Tiny dust storms can look like tornados, and large ones can be seen from Earth. Mars’ large storms sometimes cover the entire planet.
Mars has about one-third the gravity of Earth. A rock dropped on Mars would fall more slowly than a rock falls on Earth. A person who weighs 100 pounds on Earth would only weigh about 38 pounds on Mars because of the reduced gravity.
To know more about Mars composition, visit here
https://brainly.com/question/411227
#SPJ4
spring a is stiffer than spring b (ka > kb). the spring force of which spring does more work if the springs are compressed (a) the same distance and (b) by the same applied force?
Given that A was stiffer than B (KA > KB), the force given to both springs is the same for A, whose spring constant is higher than B's but whose expansion is smaller, and whose work will thus be less than B's.
What does physics' ideal spring look like?The equilibrium length of a perfect spring exists. When a spring is squeezed, a force pushing each end apart has a magnitude proportional to the length drop from the equilibrium length.
What is the Spring-Hooke law?Hooke aimed to show how a spring's elasticity and the forces acting on it are related. According to Hooke's Law, a spring's extension is proportional to the load placed on it. As long even as load does not exceed a material's elastic limit, a variety of materials abide by this rule.
To know more about springs visit:
https://brainly.com/question/14159361
#SPJ4
You throw a ball straight forward with a velocity of 20
m/s, from a height of 1 meter. How far will it be when it hits the ground after 0.45 seconds?
The ball will continue to advance at a speed of 2.0 m/s once it rolls off the edge of the table until it lands on the ground after 0.45 seconds.
Why do we do it?The ball is behaving just like it has been dropped. Nature is unconcerned by the fact that it is also advancing.
D=1/2gt2 and T=√2d/g
By entering the table's height and the gravitational acceleration, we can calculate the time in seconds:
t= √2(1.5m)/9.8m⋅s−2 = 0.553s
So, for a little bit longer than a half-second, the ball will be in the air (and thus able to move ahead). To find the distance travelled, we simply reverse the speed equation, s=dt, and insert in the speed and time:
d= 20m/s(0.553s)= 1.11m
To know more about Projectile, visit-https://brainly.com/question/28692427
#SPJ13
why does the atmosphere of saturn appear to have only half the helium content of jupiter? why does the atmosphere of saturn appear to have only half the helium content of jupiter? much of saturn's helium has reacted with water and formed helium oxide. much of saturn's helium has differentiated towards its center. because saturn is so much colder, helium does not show up as strongly in its spectrum. a red dwarf, jupiter has fused some of its hydrogen into helium, whereas saturn, a colder planet, has not. saturn was formed farther from the helium rich sun.
The correct answer is option C.
The atmosphere of Saturn appear to have only half the helium content of Jupiter because Saturn is so much colder, helium does not show up as strongly in its spectrum.
The planet Saturn is a giant ball of gases including hydrogen, helium and methane. All these gases make up a thick atmosphere of the planet.
In general, the concentration of hydrogen is about 96.3%, helium 3.25% and methane 0.45%.
Clouds on Saturn are composed of ice crystals of ammonia and the temperature is around -400F which is much colder then Jupiter.
Thus, atmosphere of Saturn appear to have only half the helium content of Jupiter because Saturn is so much colder.
If you need to learn more about Saturn click here:
https://brainly.com/question/840383
#SPJ4
a father uses a rope to pull a child on a sled at a constant speed. of the ones listed which forces are present?
When father uses a rope to pull a child on a sled at a constant speed then the sum of all the forces acting on sled is zero.
What are the forces present while pulling a child on sled using rope?Forces such as normal force, force of gravity, force of friction, tension and air resistance are present.
But as the father pulls the sled with constant speed then the the sum of all the forces acting on the sled becomes zero.
As there is no movement in upward or downward directions then the weight of the child and the sled is equal to the normal force acted upon the sled by ground.
The force which is applied by the father on the rope is equal to the tension in the rope.
Friction and air resistance act opposite to the direction of motion of the sled and as sled moves at constant speed, tension in the rope must be equal to the sum of friction and air resistance forces.
To know more about forces, refer
https://brainly.com/question/12970081
#SPJ4
a 2.0-kg object is moving without friction along the x-axis. the potential energy curve as a function of position is shown in the figure, and the system is conservative. if the speed of the object at the origin is 4.0 m/s, what will be its speed at 7.0 m along the x-axis?
The speed at 7.0 m along the x-axis is 4.24 m/s.
Which speed is it?the rate at which the location of an object changes in any direction. The ratio of distance traveled to the time required to travel that distance is known as speed. Considering that speed only has a direction and no magnitude.
given,
speed of the object at origin = 4 m/s
potential energy at origin = 10 J
mass of the object = 2 kg
potential energy at 7 m = 8 J
since the system is conservative so it'll follow the conservation of energy
that is,
initial energy = final energy
kinetic energy = 0.5 ×m× v²
initial potential energy + initial kinetic energy = final potential energy + final kinetic
energy
10+ 0.5 × 2 × 4² = 8 + 0.5 × 2 × v²
v = 4.24 m/s
speed at 7m = 4.24 m/s.
To know more about speed visit:
https://brainly.com/question/28224010
#SPJ4
computerized x-ray imaging in the transverse plane: a.magnetic resonance imaging (mri) b.ultrasonography c.lymphadenectomy d.lymphangiogram e.ct scan
CT scan stands for computerized x-ray imaging in the transverse plane.
What is CT scan?X-rays can flow through it. Images of the body are produced in three planes using magnetic fields and radio waves (coronal, sagittal and axial).Through computer processing, cross-sectional images (slices) of bones, blood arteries, and soft tissues inside your body are produced during a computerized tomography (CT) scan, which combines a number of X-ray images collected from various angles all over your body.The body is divided into superior and inferior halves by an anatomical plane called the transverse plane, also referred to as horizontal plane, axial plane, and transaxial plane.CT images, which are two-dimensional images of three-dimensional physical things, are commonly used. In order to create the photographs, electrical energy (moving electrons) must first be converted into X-ray photons, which must then be passed through an object and detected before being converted back into electrons.To learn more about CT scan refer to :
https://brainly.com/question/1524856
#SPJ4
a car traveling but at 100 km/h and applies it's brake to stop the acceleration is -10 m/s2 how long does it take for the car to stop?
Answer:
10s [seconds]
Explanation:
[tex]t = \frac{v}{a} [/tex]
t = v/at = 100/-10t = -1010s [seconds]joey is riding in an elevator which is accelerating upwards at 2.0 m/s2. The elevator weighs 300.0 kg, and Joey weighs 60.0 kg. What is the tension in the cable that pulls the elevator upwards?
The tension in the cable is 4248 N.
what is tension?The force transmitted through a rope, string, or wire when two opposing forces pull on it is known as tension. The tension force pulls energy equally on the bodies at the ends and is applied along the entire length of the wire.
Given parameters:
Weighs of the elevator, M = 300.0 kg.
weighs of Joey, m = 60.0 kg.
Upward acceleration of the elevator, a = 2.0 m/s².
And, acceleration due to gravity, g = 9.8 m/s².
So, net tension in the cable, T = (M + m)g + (M + m)a
= ( 300.0 + 60.0 ) × 9.8 N + (300.0 +60.0 )× 2.0 N
= 4248 N.
Hence, the tension in the cable that pulls the elevator upwards is 4248 N.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ1
A block of mass m1 = 14.4 kg is on a frictionless table to the left of a second block of mass m2 = 20.2 kg, attached by a horizontal string (see the figure below).
(a) If a horizontal force of 1.53 ✕ 102 N is exerted on the block m2 in the positive x-direction, use the system approach to find the acceleration (in m/s2) of the two blocks.
(b) What is the tension (in N) in the string connecting the blocks?
(a) The acceleration (in m/s²) of the two blocks is 4.42 m/s².
(b) The tension (in N) in the string connecting the blocks is 63.65 N.
What is the acceleration of the blocks?
The acceleration of the blocks is determined by applying Newton's second law of motion as shown below.
F(net) = ma
where;
F(net) is the net force on the blocksm is the mass of the blocksa is the acceleration of the blocksF = m₁a + m₂a
F = a(m₁ + m₂)
a = F/(m₁ + m₂)
where;
a is the common acceleration of the blocksm₁ is the mass of the first block = 14.4 kgm₂ is the mass of the second block = 20.2 kgF is the applied force on the blocks = 153 Na = (153) / (14.4 + 20.2)
a = 4.42 m/s²
The tension (in N) in the string connecting the blocks is calculated as follows;
T = m₁a
T = 14.4 x 4.42
T = 63.65 N
Learn more about tension in strings here: https://brainly.com/question/24994188
#SPJ1
which factor is not usually considered by physicians when determining how much to charge for a procedure
The charge for a procedure or accepting fees that are predetermined by the plan is dependent on the patient's ability to pay.
What does a physician do?Doctors and surgeons deal with maintaining health as well as diagnosing and treating illnesses and injuries. In addition to conducting physical examinations and medical history inquiries, doctors also order, carry out, and interpret diagnostic tests. Patients frequently receive advice from them on food, cleanliness, and preventative healthcare.
Physician labor is the part of the Medicare Physician Fee Schedule that represents the overhead expenses related to a service.
Mistaken cost.practice cost.Factor of conversion.While precertification gives the provider permission to provide the medical service, preauthorization specifically establishes the dollar amount approved for the medical procedure.
The main distinction between doctors and physicians is that doctors typically specialize in a field of practice while physicians typically have a more general background.
To learn more about physician refer to:
https://brainly.com/question/925545
#SPJ4
what phase is the moon in when it rises around noon? what phase is the moon in when it rises around noon? third quarter first quarter new full none of the above because the moon always rises around sunset.
First Quarter phase is the moon in when it rises around noon.
When the Moon rises at noon, what phase is it in?During the first quarter phase, the western half of the Moon is illuminated to resemble the letter "D." The Moon rises at noon that day and sets at midnight. When the Moon is in its waxing gibbous phase, it is mostly bright, and the illuminated area is egg-shaped (gibbous), with the eastern edge shadowed.
Lunar phases are the many phases of the moon. The sun's light is reflected by the moon, which does not produce any light of its own. New moons occur when the distant side of the moon is illuminated by sunlight. A new moon is visible when it reflects from a side that is close to it.
The moon goes through eight phases: new moon, waxing crescent, first quarter, full moon, waxing gibbous, third quarter, and declining crescent.
It takes the moon 29.5 days, or roughly one month, to go through all of these phases. This cycle of the moon changing phases is known as the lunar cycle.
Gibbous phases appear when more than half of the moon is illuminated, while crescent phases occur when just half is lighted.
Waxing is an increase in illumination, whereas waning is a reduction.
To know more about phases of moon visit:
https://brainly.com/question/8648517
#SPJ4
when an object is moving in a circle at constant speed, its acceleration is a. constantly increasing b. constant in direction
The acceleration of an object is moving in a circle at constant speed is just constant (or constant in magnitude). It is not constant in direction nor constantly increasing.
What is acceleration?Acceleration in physics is defined to be the rate of change of the velocity of an object with respect to time. Acceleration, including centripetal acceleration, is a vector quantity because it has magnitude as well as direction. Objects that are changing speeds or changing directions (or changing both) are said to be accelerating.
Centripetal acceleration is the acceleration of a body traversing a circular path. It is equal to velocity squared over radius. Since an object traveling on a circular path is constantly changing directions, even at constant speed, the object is accelerating as well.
Learn more about acceleration here: https://brainly.com/question/460763
#SPJ4
Determine the direction of the magnetic field of the current-carrying wire in the vicinity of the loop.
To determine the direction of the magnetic field of the current-carrying wire in the vicinity of the loop, you can use the right-hand rule.
How do you use this right-hand rule?If you're confused of what the direction of the magnetic field around a current-carrying wire is supposed to be, you can use the right-hand rule to conveniently figure out the direction. To use this right-hand rule, first curl your right-hand fingers and then point your right thumb in the direction of the current in the wire. Your right-hand fingers will be curled in the same direction as the direction of the magnetic field around the current-carrying wire.
There is another type of the right-hand rule. This type of right-hand rule is used to identify the direction of axes or parameters that point in three dimensions.
Learn more about the right-hand rule here: https://brainly.com/question/26414662
#SPJ4
In Figure 4.7, the net external force on the 24-kg mower is stated to be 51 N. If the force of friction opposing the motion is 24 N, what force F (in newtons) is the person exerting on the mower? Suppose the mower is moving at 1.5 m/s when the force F is removed. How far will the mower go before stopping?
The force (F) exerted on the mower of mass 24 kg is 2.125 N and The distance the mower will travel when before it stopping when F is removed is 0.53m.
What is force?Force can be defined as the product of mass and acceleration.
To calculate the force the person is exerting on the mower, we use the formula below.
Formula:
F = F'+f......... Equation 1Where:
F = Net external force on the mowerf = Force of frictionFrom the question,
Given:
F' = 51 Nf = 24 NSubstitute these values into equation 1
F = 51+24F = 75 NAlso, To calculate the distance the mower will move before stopping, We need to first find the acceleration of the mower using the formula below.
Formula:
a = F/m................. Equation 2Where:
F = Net external force of the mowerm = Mass of the mowera = Acceleration of the mowerFrom the question,
Given:
F = 51 Nm = 24 kgSubstitute these values into equation 2
a = 51/24a = 2.125 m/s²Finally, we use the formula below to calculate the total distance the mower will travel before stopping
Formula:
s = (v²-u²)/2a......... Equation 3Where:
s = Total distancev = Final velocityu = Initial velocityFrom the question,
Given:
v = 1.5 m/su = 0 m/sSubstitute these values into equation 3
s = (1.5²-0²)/(2×2.125)s = 0.53 mHence, the force exerted on the mower is 2.125 N and the distance the mower will travel before it stops is 0.53m.
Learn more about force here: https://brainly.com/question/25239010
#SPJ1
suppose a ship flies toward you at nearly lightspeed. in the ship's reference frame, it is 10 m long (front to back). when you measure its length, what is the result?
Its length is 6.6m.
How is length contracted defined?Length contraction is a phenomena where a moving object's length is measured to be less than it actually is.
When an object is travelling faster than the viewer, but not at the speed of light, length contraction is seen. The relativity of space and time is the cause of this. The two extremes of a moving object will send out signals like light at somewhat different intervals to an observer watching the thing.
Using the relationship between length contraction,
l = l₀[tex]\sqrt{1-\beta^{2} }[/tex]
β = v/c
l₀ = 10m
v = 0.75c
v/c = 0.75
In place of, we have
l = 10×[tex]\sqrt{1-0.75^{2} }[/tex]
l = 10× 0.66
l = 6.6m.
To know more about length contraction visit:
https://brainly.com/question/17193574
#SPJ4
What is the process that causes harmful materials to seep into the ground and move through rock and soil and contaminate ground water?.
a boy pushes a wheelbarrow with a force of 36 n to the left. a frictional force of 13 n opposes the motion. the wheelbarrow and its contents have a mass of 37 kg. calculate the acceleration of the wheelbarrow:
The acceleration of the wheelbarrow is 0.621 m/s^2 .
There will be equal force applied on both side, in that case the object will be having zero motion and zero acceleration.
But in the case when there is more force applied in one direction than other side force then there will be acceleration on the object.
This acceleration is equal to the ΔF/m.
where ΔF is the difference of the forces applied on the both direction
and m is the total mass of the object.
According to the question, we have m = 37Kg
ΔF = (36-13) n = 23 n
so a = 23/37 = 0.621 m/s^2
so acceleration of the wheelbarrow is 0.621 m/s^2 .
To learn more about acceleration, visit here
https://brainly.com/question/12550364
#SPJ4
an outboard motor for a boat is rated at 35 hp. if it can move a particular boat at a steady speed of 35 km/h, what is the total force resisting the motion of the boat?
The total force resisting the motion of the boat will be 26850.6 Newton when an outboard motor for a boat is rated 35 hp.
What is force and what is the total force resisting the motion of the boat?Force is the quantity which is technically the product of mass and acceleration .Here the question is about a boat which is rated at 35 hp and speed of 35 km/h and the force resisting the motion of the boat is asked.Putting the formula P = F x v , that is power equals force multiply speed we can calculate the speed.F= P/V , converting power to watt , 35 hp= 35 x 745= 26,075 watt of the power used.Now converting speed into m/s , 35 km/hr = 35 x 5/18 = 9.7 m/s and then diving power and speed , 26075/ 9.7 = 26850 N.To know more about force visit:
https://brainly.com/question/13191643
#SPJ4
When using a schematic for
troubleshooting, which of these is the best
property to follow?
A. the service
B. the meter
C. the power
When using a schematic for troubleshooting, the best property to follow is the meter and is denoted as option B.
What is Meter?This is referred to as any type of device which is built to accurately detect and display an electrical quantity in a form which is readable by a human being.
Examples of meters which are used by people include voltmeter, ohmeter etc which are used to read voltage and current respectively. It is used to troubleshoot when schematics are used as certain parameters are detected and analyzed so as to detect the issue and solve it appropriately.
Read more about Meter here https://brainly.com/question/13170748
#SPJ1
the current on a solenoid is 3 a, the radius of the windings are 2 m , length of the solenoid is 10m , number of windings is 100. calculate the self inductance of this solenoid.
The self inductance of a solenoid is 157.9 * [tex]10^{-4}[/tex] H
Self inductance is defined as the property of a current-carrying coil that resists or prevents the current passing through it from changing.
• It is represented by L
• The unit for the self inductance is Henry denoted by H.
• Mathematically, it is L = ц[tex]N^{2}[/tex]A / l
where
ц is the vacuum permeability = 4π * [tex]10^{-7}[/tex]
N is the number of turns of the solenoid = 100
A is the area of one loop of the solenoid = π [tex]r^{2}[/tex]
( r = 2m )
A = π [tex]r^{2}[/tex] = 4π
l is its length
So the self inductance of the solenoid will be
L = 4π * [tex]10^{-4}[/tex] * 100*100 * 4π / (10)
L = 16π² * [tex]10^{-4}[/tex] H
L = 157.9 * [tex]10^{-4}[/tex] H
The self inductance of this solenoid is 157.9 * [tex]10^{-4}[/tex] H
To know more about self inductance,
https://brainly.com/question/9808543
#SPJ4
1.what did you observe about the motion of objects during and after collisions? 2. based on the velocity change of each object, what did you infer about the direction of forces during a collision?
1.When two objects collide, both objects experience forces that are equal in magnitude and opposite in direction. Such forces often cause one object to accelerate (gain speed) and another object to slow down (lose speed).
2. The effect of the forces experienced on the objects during the collision is different if the masses of the objects are different. The same force causes different changes in velocity for objects with different masses. An object with a smaller mass has a greater change in velocity when the same force is applied.
What is collision?A collision means that two objects collide with each other for a very short time. In other words, a collision is the interaction of two masses in a very short period of time, where the momentum and energy of the colliding masses change.
The law of conservation of momentum usually applies to collisions between two masses, but some collisions may involve kinetic energy. Depending on the conservation of energy there can be two types of conservation:
Elastic collision Inelastic collision:To learn more about collision, refer;
https://brainly.com/question/13138178
#SPJ4
How does the amount of work trevor performs going to the corner compare with the amount of work he performs coming back? they are the same because he uses the same amount of force. they are the same because he travels the same distance. he does less work coming back because the force moving the wagon is only 50cos30°. he does more work coming back because the force moving the wagon is only 50cos60°.
Answer:C) he does less work coming back because the force moving the wagon is only 50cos30
Explanation: got it right on edge
The amount of work Trevor performs going to the corner compared with the amount of work he performs coming back is that he does less work coming back because the force moving the wagon is only 50cos30°
Since the formula, we refer to for calculating the work, when the angle is applied is:
Wₓ = W cos θ, where for the case the θ is 30 and W is 50
Since the force done is parallel to the motion's direction, and the work has a larger magnitude, the work done in order of pulling the wagon back to the starting point is less than the work done in pulling the wagon to the corner, as the reason is for the angle of 30 degrees in pulling it back
To know more about the work done refer to the link https://brainly.com/question/13662169?referrer=searchResults.
#SPJ4
The first step in the proton-proton chain produces an antielectron, or positron. What happens to the positron?.
In the first step in the proton-proton chain, the positron gets rapidly converted to energy when it meets a standard electron, leading to matter-antimatter annihilation.
The positron is an antiparticle or antimatter counterpart of the electron. It persists an electrical charge of +1e, a spin of 1/2, and a mass identical to the mass of the electron. When a positron collides with an electron, destruction occurs. If this collision is at low energies, it leads to the production of two or more photons. They're created by radioactive decay or by the pairing of two protons at high energies.
The proton-proton chain is a nuclear fusion. The proton-proton fusion is initiated only when the kinetic energy of the proton is high enough to undergo the electrostatic repulsion.
Learn more about Nuclear fusion here https://brainly.com/question/25190319
#SPJ4
a plane electromagnetic wave has an average power per unit area of 153 w/m2 . a flat, rectangular surface, 18.2 cm by 45.1 cm, is placed perpendicular to the direction of the plane wave. if the surface absorbs half the energy and reflects half, calculate the net energy absorbed in 1.22 min. answer in units of j.
Knowing the power of the units and the electromagnetic waves is necessary to calculate the net energy unit.
What is power?
Power is the work completed in a given amount of time or time spent working. The joules per second (J/s)-based SI power unit is the Watt (W). Horsepower (hp), roughly equal to 745.7 watts, is sometimes used to describe the power of machines like motor vehicles.
What are electromagnetic waves?
Magnetic and electric fields vibrate together to produce electromagnetic waves, also known as EM waves. In other words, oscillating magnetic and electric fields make up electromagnetic waves (EM).
P=I*A=t=E/t
E=I*A*T
I= 153W/M^2
A=18.2*45.1*10^-4
A=0.082082
t=1.22mins = 1.22*60^S
t= 73.2
applying the formula E=I*A*T
E= 919.2855j
Therefore, the net energy absorbed in 1.22 min is 919.285j.
Learn more about Power from the given link.
https://brainly.com/question/1634438
#SPJ4