Drinking 309.8 cans of soda would be lethal.
To determine the lethal dose of a particular brand of soda, we can follow these steps:
Determine the caffeine concentration in the soda in mg/oz (in this case it is 2.69 mg/oz)Determine the number of ounces in a can of soda (in this case it is 12 oz)Multiply the caffeine concentration by the number of ounces in a can to find the total amount of caffeine in a can (2.69 mg/oz * 12 oz = 32.28 mg)Determine the lethal dose of caffeine in mg (in this case it is 10,000 mg)Divide the lethal dose by the amount of caffeine in a single can to find the number of cans required to reach the lethal dose (10,000 mg / 32.28 mg/can = 309.8 cans).So, Drinking 309.8 cans of soda would be lethal, which is extremely dangerous and non-recommended, even a small amount of caffeine can cause serious health problems. It is important to consult a doctor or a specialist before making any decisions about consuming caffeine.
Learn more about concentration here:
https://brainly.com/question/17206790
#SPJ4
Predict what will happen to the concentration of pyruvate, nadh and h when glycolysis is stopped by 2-deoxyglucose.
The concentration of pyruvate will decrease, NADH and h are used without replacement when glycolysis is stopped by 2-deoxyglucose.
The step or process in cellular respiration known as glycolysis is the one in which one molecule of glucose is transformed into two molecules of pyruvate, hydrogen ions, and water molecules in that order correspondingly. In addition, the production of ATP and NADH takes place at this stage of the process of cellular respiration as well.
When glycolysis is terminated by 2-deoxyglucose, the NADH and H+ that have been generated will be used up without being replaced by new molecules in the subsequent stages of cellular respiration.
Since this is the case, we are able to draw the conclusion that when glycolysis is inhibited by 2-deoxyglucose, the concentration of pyruvate will drop, and NADH and H+ will be used up without being replaced.
You can also learn about glycolysis from the following question:
https://brainly.com/question/15159050
#SPJ4
how can properties of matter help identify unknown substances
Properties of matter can be used to identify unknown substances in the following ways:
Density, Boiling point, Melting point, Solubility, Spectroscopy, Physical state, and Chemical reaction.
What is Boiling Point?The boiling point is the temperature at which a substance transforms from a liquid to a gas.
Boiling causes the liquid to turn into gas, which is a phase transition.
Depending on the atmospheric pressure around it, a substance's boiling point will fluctuate.
Boiling point is a vital physical characteristic that is used in numerous industrial and laboratory procedures.
A substance's standard boiling point is defined as the temperature at which it becomes boiling at 1 atmosphere (101.3 kPa) of pressure.
When comparing liquids with comparable qualities, the boiling point can be used as a guide.
To learn more about boiling point from the given link:-
https://brainly.com/question/40140
#SPJ1
What is 1 mole of CO2?
1 mole of CO2 is 6.022 x 10^23 molecules of CO2. It is also 44.01 g of CO2. Here 44.01 g comes as the sum of individual atoms of CO2 i.e. 12.01 + 16 + 16 i.e. 44.01 g
CO2 is composed of one carbon atom and two oxygen atoms, which have the atomic masses of 12.01 g/mol and 16.00 g/mol respectively. So, the molar mass of CO2 is the sum of the atomic masses of the atoms that make up CO2, which is 12.01 + 16.00 + 16.00 = 44.01 g/mol. Carbon dioxide (CO2) is a naturally occurring compound made up of one carbon atom and two oxygen atoms. It is a colorless, odorless gas and is a byproduct of many biological and industrial processes. CO2 is a greenhouse gas, which means it helps trap heat in the Earth's atmosphere and contributes to global warming.
Therefore, one mole of CO2 weighs 44.01 grams.
To know more about mole please refer: https://brainly.com/question/20486415
#SPJ4
18.6 ml of 0.48 m naoh is used to titrate an unknown concentration of vinegar, what is the molarity of the acetic acid
To determine the molarity of the acetic acid in the vinegar, we can use the information provided about the volume and concentration of the NaOH solution used to titrate it.
First, we need to calculate the number of moles of NaOH used in the titration:
moles of NaOH = concentration x volume
moles of NaOH = 0.48 M x 0.0186 L = 0.00884 moles
Since acetic acid (CH3COOH) and sodium hydroxide (NaOH) react in a 1:1 ratio, the number of moles of acetic acid in the vinegar is also 0.00884 moles.
To calculate the molarity of the acetic acid, we need to divide the number of moles by the volume of the vinegar solution:
Molarity = moles/volume
Molarity = 0.00884 moles / (unknown volume)
We can then use the molarity of the acetic acid, to find the concentration of acetic acid in the vinegar. To find the unknown volume we have to use the formula of the reaction of acetic acid and NaOH.
Find more about Molarity here: https://brainly.com/question/8732513
#SPJ4
What is reduction reaction in simple words?
Reduction is a half-reaction in which a chemical species reduces its oxidation number by gaining electrons. Reduction is the gain of electrons or a decrease in the oxidation state of a chemical or atoms within it.
Definition of Reduction ReactionA reduction reaction is a reaction when an atom experiences a decrease in its oxidation number. It can be said that a reduction reaction is a reaction when a substance loses oxygen. Examples of redox reactions in everyday life are rusting, combustion, decay, photosynthesis and metabolism.
Many things can be done with reduction events, for example dissolving nitric acid for raw materials for the chemical industry or agricultural fertilizers, testing for sulfate content in salt, avoiding seawater contamination in the process of cyanidation of gold minerals, and the chemical element arsenic.
Learn more about reduction at https://brainly.com/question/28813812.
#SPJ4
In aqueous solutions, which type of bond or force has similar bond strength as ionic bond interactions?
The strength of hydrogen forces or bonds in aqueous solutions is comparable to that of ionic bond interactions. More powerful than the covalent connections between atoms.
Attraction between molecules and compounds. There aren't many powerful intermolecular forces. Covalently bonded molecules are capable of dissociating from one another when less energy is applied. This makes these chemicals very volatile. These bonding pairs of electrons result in the formation of ionic bond, which are the smallest part of a compound that preserves its chemical identity. This kind of link is created when two atoms from the same or nearly related elements in the periodic table come together. The strength of hydrogen forces or bonds in aqueous solutions is comparable to that of ionic bond interactions.
Learn more about ionic bond here
https://brainly.com/question/11527546
#SPJ4
How many hydrogen atoms are in 1 mol of methanol?
Methanol, also known as methyl alcohol. There are 4 hydrogen atoms in 1 mole of methanol (CH3OH).
Methanol is a primary alcohol and its molecular formula is CH3OH. It is sometimes referred to as wood alcohol and methyl alcohol. The molecule of methanol is composed of a single carbon atom, four hydrogen atoms and one oxygen atom. It is a liquid at room temperature and pressure, with a boiling point of 64.7 °C and a density of 789 kg/m3. It is a polar solvent and can dissolve many inorganic and organic compounds. Methanol is produced industrially by the hydrogenation of carbon monoxide and is also found in trace amounts in nature. It is commonly used as a solvent, in the production of formaldehyde, acetic acid and other chemicals, as well as fuel for racing cars and as a fuel additive. Methanol is toxic when consumed in large quantities and can cause blindness or death. It is also used in the production of biodiesel and as antifreeze.
To know more about methanol please refer: https://brainly.com/question/24077457
#SPJ4
Help what’s the answer?
The supplied solution will have a volume of 1.01 mi, or 0.00101 Liters.
How much is a liter?The metric unit of volume known as the liter is mostly used to measure liquids. Liters are denoted by the letters "L" or "l". Milliliters are the unit of measurement for smaller liquid amounts (mL). 1000 milliliters make up one liter.
What is equivalent to 1 liter?The liter is a metric unit of volume that can be written with the letters L or l in the SI. Its American English equivalent is the liter. It is equivalent to one cubic decimeter (dm3), one thousand cubic centimeters (cm3), or one thousandth of a cubic metre (m3).
To know more about solution visit:-
https://brainly.com/question/7932885
#SPJ1
How many moles of HCI can be produced from 0.424 gram of SOCI₂?
SOCI2 + H₂O → SO₂ + 2HCI
700 moles
0.00700 moles
0.0038 moles
0.040 moles
Mole of HCI = 0.00700 moles
what is moles?The mole is the amount of substance of a system which contains as many elementary entities as there are atoms in 0.012 kilogram of carbon 12; its symbol is “mol”A mole is a very important unit of measurement that chemists use. A mole of something means you have 602,214,076,000,000,000,000,000 of that thing, like how having a dozen eggs means you have twelve eggs. Chemists have to measure using moles for very small things like atoms, molecules, or other particles., a mole of water contains NA number of H2O molecules. However, each water molecule contains 2 hydrogen atoms and one oxygen atom. Therefore, one mole of H2O contains 2 moles of hydrogen and one mole of oxygenTo learn more about moles refers to:
brainly.com/question/15356425
#SPJ1
Subatomic particles are particles that are smaller than an atom. There are many different types, but three of the most common are protons, neutrons, and electrons. Protons and neutrons are found in the nucleus of atoms.
Protons and neutrons are the subatomic particles that can be found in the oxygen atoms' nuclei.
An electron is a negatively charged subatomic particle that can be either bonded to or free from an atom. Electrons, proton, and neutron make form an atom's nucleus. The electron is a fundamental particle and is not composed of anything. Since electrons are present in nature freely and are made up of atoms, this describes their nature as being free. The primary duty of an electron is to serve as a negatively charged atom component. The major source of current conductivity is the electron, and both the number of electrons and the atomic number of an element are always the same or equal. Although there is no such thing as an electron, it has a mass of 9 10–31.
Learn more about The electron here:
https://brainly.com/question/19206266
#SPJ4
demolition?
i dont understand that at all.
What happens when h2 and O2 combine?
When hydrogen (H2) and oxygen (O2) combine, they form water (H2O) and release energy in the form of heat and light, a process known as combustion. This is represented chemically as follows: 2H2 + O2 -> 2H2O + energy (heat and light).
Hydrogen (H2) is a colorless, odorless, and flammable gas that is the lightest element on the periodic table. It is the most abundant element in the universe and can be found on Earth in both gaseous and liquid form. Oxygen (O2) is a colorless and odorless gas that makes up about 21% of the Earth's atmosphere. It is necessary for the survival of most living organisms, as it is used in the process of respiration.Combustion is a chemical process in which a substance reacts with oxygen to produce energy in the form of heat and light.The process of combustion can be exothermic, meaning it releases heat, or endothermic, meaning it absorbs heat. The combustion of hydrogen and oxygen is an exothermic reaction, which releases a large amount of energy.
Learn more about Combustion here:
https://brainly.com/question/15117038
#SPJ4
What is 22.4 liters at STP?
At STP(Standard temperature pressure) 1 mole of any gas occupies a volume of 22.4 L.
A mole of any gas occupies 22.4L at standard temperature and pressure (273K and 1atm).The molar volume of a gas is the volume of one mole of a gas at STP. Substitute the values n =1, R=0.82057 L atm mol-1K-1, T=273.15K and P= 1atm so after applying the formula V= nRT/P and putting these vaue we got the total volume is 22.4L.So at STP, 1 mole of any gas occupies a volume of 22.4L.
Learn more about mole here:
https://brainly.com/question/26416088
#SPJ4
.
Why is the third ionization energy of magnesium so much greater than the second ionization energy?
Answer:
The second ionization energy of Mg is larger than the first because it always takes more energy to remove an electron from a positively charged ion than from a neutral atom. The third ionization energy of magnesium is enormous, however, because the Mg2+ ion has a filled-shell electron configuration.
Explanation:
MAKE SURE TO REPHRASE
In aqueous solutions, which type of bond or force has similar bond strength as ionic bond interactions?
a) Polar covalent bond
b) Hydrophobic clustering
c) Hydrogen bonds
d) Nonpolar covalent bond
Hydrogen bonds have similar bond strength as ionic bond interactions in aqueous solutions.
Ionic bonds are formed between positively and negatively charged ions and are characterized by a large difference in electronegativity between the atoms involved. The bond strength of ionic bonds is quite high. In aqueous solutions, hydrogen bonds also have a relatively high bond strength, as they are formed between a partially positively charged hydrogen atom and a partially negatively charged atom, such as oxygen or nitrogen. Hydrogen bonds are weaker than ionic bonds, but they are still relatively strong compared to other types of interactions such as dipole-dipole interactions or London dispersion forces. Hydrophobic clustering and nonpolar covalent bonds are not as strong as hydrogen or ionic bonds.
To know more about ionic bond
https://brainly.com/question/11527546
#SPJ4
which phase change occurs when steam is cooled to 100°c?
Which of the following is the function of nervous system?
Group of answer choices
The functions of nervous system are:
The nervous system processes information from receptors that detect changes in the environment.The nervous system coordinates the systems of the body.The nervous system sends out appropriate responses to react to changes in the environment.The nervous system maintains homeostasis.What is the nervous system?The brain, spinal cord, and a sophisticated nerve network are all parts of the nervous system. The brain and the body are communicated with via this system. All bodily functions are managed by the brain. From the brain, the spinal cord descends via the back.
The nervous system controls how the body's systems work together. In response to environmental changes, the nervous system releases the proper responses. The nervous system keeps things in balance.
Therefore, option A, C, D, F, are correct.
Learn more about nervous system at:
https://brainly.com/question/2114466
#SPJ1
missing options:
The nervous system processes information from receptors that detect changes in the environment.
The nervous system secretes hormones that help specific groups of cells perform specific functions.
The nervous system coordinates the systems of the body.
The nervous system sends out appropriate responses to react to changes in the environment.
The nervous system regulates growth, development, and reproduction.
The nervous system maintains homeostasis.
predict the splitting pattern for each of the labeled hydrogens in this structure. use the term 'multiplet' for any splitting pattern that results in more than 7 peaks. if the molecule does not have a signal 'd', choose (none). signal a: signal b: signal c: signal d:
The splitting pattern for each of the labeled hydrogens in this structure is Signal A: Triplet, Signal B: Quartet, Signal C: Quartet, Signal D: None
Signal A is split by two other protons, resulting in a triplet. Signal B is split by three other protons, resulting in a quartet. Signal C is split by three other protons, resulting in a quartet. Since there are no other protons attached to signal D, it will not have a splitting pattern, and thus is labeled as "None".
In NMR, a multiplet refers to any splitting pattern that results in more than 7 peaks. Since signals A, B, and C each have 4 peaks, they are labeled as triplet and quartet, respectively.
For more questions like Splitting pattern click the link below:
https://brainly.com/question/16340608
#SPJ4
What amount of heat, in KJ, would be involved in condensing 12. 9 g of ch3OH ?(hvap=38. 0 kj/mol
The amount of the heat in kJ , would be involved in the condensing 12.9v g of the CH₃OH is the 15.2 kJ.
Given that :
The mass of the CH₃OH = 12.9 g
The ΔH = 38 kJ/mol
The molar mass = 32 g/mol
The number of the moles = mass / molar mass
The number of the mole = 12.9 / 32
= 0.403 mol
The number of the moles is 0.403 mol
The amount of the heat is given as :
Q = n ΔH
Q = 0.403 × 38
Q = 15.2 kJ.
Thus, the amount of the heat is 15.2 kJ.
To learn more about heat here
https://brainly.com/question/21655944
#SPJ4
Which of the following statements is true of these two cells?
The statement that is true of the two cells is nerve cells do not look like skin cells because they make up different organs and have different functions. The correct option is A.
What are cells?Any living organism's primary functional and fundamental unit is its cells.
Although all of the cells in the body have the same DNA, they all have different structures and functions. In contrast to skin cells, which are found throughout the body, nerve cells are only found in the brain and spinal cord.
Therefore, the correct option is A. Nerve cells do not look like skin cells because they make up different organs and have different functions.
To learn more about cells, refer to the link:
https://brainly.com/question/1615480
#SPJ1
The question is incomplete. Your most probably complete question is given below:
A.
Nerve cells do not look like skin cells because they make up different organs and have different functions.
B.
Nerve cells do not look like skin cells because they contain completely different DNA within the same organism.
C.
Nerve cells and skin cells are identical to one another in appearance and function.
D.
Nerve cells and skin cells appear different from each other, but they have identical functions.
an amino acid chain a. is also known as a monomer. b. ultimately folds into a three-dimensional shape. c. becomes a triglyceride when folded. d. is held together by ionic bonds.
An amino acid chain is also known as a monomer ultimately folds into a three-dimensional shape.
An amino acid chain, also known as a monomer, is the building block of proteins. Proteins are made up of one or more amino acid chains that are linked together. These chains ultimately fold into a three-dimensional shape, which determines the protein's function. The specific sequence of amino acids in a chain, as well as the way the chain folds, are determined by the genetic code. The folding process is influenced by various factors such as temperature, pH, and the presence of other molecules. The three-dimensional shape of a protein is crucial for its function, as it determines how the protein interacts with other molecules in the cell.
To know more about protein
https://brainly.com/question/29776206
#SPJ4
Ethanol has a density that is about 0. 8 g/mL. This means that a certain volume of ethanol will ________
Ethanol has a density of approximately 0.8 g/mL, which means that for a given volume of ethanol, the mass of the ethanol will be 0.8 times the volume.
For example, if you have 100 mL of ethanol, then the mass of the ethanol would be 80 g. This density is slightly lower than the density of water, which is 1 g/mL, so a volume of ethanol will be slightly lighter than an equal volume of water.
Ethanol is a relatively volatile substance, meaning that it evaporates easily. At normal temperatures and pressures, it will evaporate at a faster rate than water. This means that if you have a certain volume of ethanol, some of it will evaporate over time, reducing the total mass of ethanol. In addition, ethanol has a lower boiling point than water, so it will evaporate more quickly at higher temperatures.
Ethanol has many uses, such as in fuel, as a solvent, and as an ingredient in alcoholic beverages. It is important to be aware of its density when measuring and using ethanol so that you can accurately measure and use the correct amount of ethanol for the desired purpose.
Learn more about ethanol:
https://brainly.com/question/28490764
#SPJ4
1. what is the molar solubility in water of ag2cro4 ? (the ksp for ag2cro4 is 8 x 10-12.) (a) 8 x 10-12 m (b) 2 x 10-12 m (c) (d) (e)
The molar solubility in water of Ag₂CrO₄ is ∛ 2x 10⁻¹². The correct answer is E.
Solubility is the measure of the degree to which a substance gets dissolved in a solvent to become a solution.
The formula for determination of molar solubity is
Ksp=[A⁺]ᵃ[B⁻]ᵇ
where
Ksp = solubility product constant
[A⁺] = cation in an aqueous solution
[B⁻] = anion in an aqueous solution
a, b = relative concentrations of a and b
Data are provided as follows:
Ksp for Ag₂CrO₄ is 8 x 10⁻¹²
The solubility of silver chromate would be just half that of the Ag+ concentration.
We express Ag2CrO4's solubility as S mol L⁻¹.
Then for a saturated solution, we have
[Ag⁺]=2S
[CrO₂⁴⁻]=S
The stoichiometry of the dissolving reaction determines the relationship between the solubility and the solubility product constant.
(2S)²(S)=4S³ = 8 * 10⁻¹²
S=∛ (2*10⁻¹²)
S= 1.26 * 10⁻⁴ M
2S = 2.52 * 10⁻⁴ M
Therefore the molar solubility in water of Ag₂CrO₄ is 2.52 * 10⁻⁴ M .
Your question is incomplete but most probably your full question attached below
To know more about Solubility
brainly.com/question/8591226
#SPJ4
The student collected data in the mass of each artificial cell the student predicted that the cell in the beaker with 25% auger solution would have the greatest change in mass after 24 hours would his predictions be correct support you answer
Based on the information provided, his prediction is not correct because the concentration of sugar is the same inside and outside the cell, so the mass will stay the same.
(Option B) is correct.
What is mass?Mass is referred to as dimensionless quantity which represents the amount of matter in a particle or object.
The artificial cells are placed in sugar solution in three different beakers where sugar solution concentration are different.
From the figure, we can deduce that the artificial cells have a sugar solution concentration of 25%.
In the beakers with 25% sugar solution, the prediction that it will have the greatest change in mass after 24 hours is incorrect.
The reason is because sugar concentration is artificial cells and the solution is equal therefore, no net change in mass will occur as the solutes cannot cross the membrane.
Because of equal concentrations, the mass of the cell will not change, and their mass is balanced.
In conclusion, the beaker with 0% solution will have the greatest change.
Learn more about mass at: https://brainly.com/question/19385703
#SPJ1
Complete question:
A student placed artificial cells, each containing a 25% sugar solution, into three different beakers containing sugar solution which varied in concentration from 0% to 25%. The setups are shown in the picture. The student collected data on the mass of each artificial cell. The student predicted that the cell in the beaker with 25% sugar solution would have the greatest change in mass after 24 hours. Would his prediction be correct? Support your answer. A) yes because it has the highest sugar concentration for both inside and outside the cell. B) no because the concentration of sugar is the same inside and outside the cell, so the mass will stay the same. C) yes because more sugar will move into the cell since it is small enough. D) no because the cell will shrink in the sugar solution.
How many atoms are present in ch4?
Methane's chemical structure is CH4. Four hydrogen atoms and one carbon atom make up this formula. Methane has five atoms in total.
We can infer from the structural formula of methane (CH4) that this compound molecule has a total of 5 atoms: 1 carbon atom surrounded by 4 hydrogen atoms.
The simplest alkane without a doubt, methane is one of the most basic organic molecules.
Four additional atoms or molecules must be bonded to the carbon atom because of its quadro-valency.
As a result, each basic alkane methane molecule contains 4 hydrogen atoms bonded to 1 carbon atom.
Learn more about CH4 from here:
https://brainly.com/question/27926556
#SPJ4
does the percentage of copper sulfate vary significantly when the mass of hydrate analyzed is varied
The percentage of copper sulphate in a hydrate sample can vary depending on the mass of hydrate that is analyzed.
If a larger mass of hydrate is analyzed, the percentage of copper sulphate may be higher than if a smaller mass is analyzed. This is because the percentage of copper sulphate is calculated by dividing the mass of copper sulphate by the total mass of the sample and multiplying by 100.
Therefore, if the total mass of the sample is larger, the percentage of copper sulphate will be lower. Additionally, if the sample is not homogenous, then the percentage of copper sulphate can vary even more, because the copper sulphate may be distributed unevenly throughout the sample.
In order to obtain a more accurate percentage of copper sulphate, it is important to ensure that the sample is homogenous and that a consistent mass is analyzed each time.
Learn more about Copper Sulphate here:
https://brainly.com/question/30128472
#SPJ4
Learning task no. 2: draw a shape of the three fundamental structures of carbon based molecules (straight chains, rings, and branched chains) after that daw one thing that resembles the said structures that you commonly see in your daily lives. Draw your answer in a separate sheet of neat paper
Carbon based molecules 1) Straight chain is linear arrangement, 2) Rings is closed loop of carbon atoms, 3) branched chain is a carbon atom that branches off from a main carbon chain.
(1) Straight chain: This structure is a linear arrangement of carbon atoms in a single row. An example of a straight chain carbon-based molecule is a hydrocarbon like n-hexane. A straight chain structure can be found in things such as a straight piece of rope or a straight road.
(2) Rings: This structure is a closed loop of carbon atoms. An example of a ring-shaped carbon-based molecule is cyclohexane. A ring structure can be found in things such as a bicycle tire or a ring on a finger.
(3) Branched chains: This structure is a carbon atom that branches off from a main carbon chain. An example of a branched-chain carbon-based molecule is isopropyl alcohol. A branched chain structure can be found in things such as a tree with branches or a fork in a road.
The structures of these three are attached in the image given below:-
To know more about carbon please refer: https://brainly.com/question/12022203
#SPJ4
What prediction can you make about the relationship between the variables a pressure and temperature of a gas?
The Charles law prediction can you make about the relationship between the variables a pressure and temperature of a gas.
What is Charles law ?
According to Charles' law, an ideal gas's volume under constant pressure increases directly as the absolute temperature does. As long as the pressure placed on a sample of a dry gas remains constant, the equation also stipulates that the Kelvin temperature and volume will be directly proportional.
What is pressure ?
The SI unit for pressure, the pascal (Pa), which equals one newton per square metre (N/m2) of surface area, is the measure of pressure. An object's pressure is inversely proportional to its area under which it is being forced and is directly proportional to the force it generates.
Therefore, Charles law prediction can you make about the relationship between the variables a pressure and temperature of a gas.
Learn more about Charles law from the given link.
https://brainly.com/question/16133810
#SPJ1
In the extraction of titanium from its ore, the final stage involves the reaction between titanium(IV) chloride, TiCl4,
and sodium.
TiCl4 + 4Na →→ Ti + 4NaCl
Calculate the maximum mass of titanium that can be obtained from 500 tonnes of titanium(IV) chloride in this
reaction.
(relative atomic mass: Ti = 48
relative formula mass of TiCl4 = 190)
(2)
The maximum mass of titanium that can be obtained from 500 tonnes of titanium(IV) chloride in this reaction is 24,000 tonnes.
The maximum mass of titanium500 tonnes x (1000 kg/tonne) x (190 g/mole TiCl4) = 95 x 10^6 g TiCl495 x 10^6 g TiCl4 x (48 g Ti/190 g TiCl4) = 24.7 x 10^6 g Ti.Therefore, the maximum mass of titanium that can be obtained from 500 tonnes of titanium(IV) chloride is 24.7 x 10^6 g.This can be calculated using the stoichiometry of the equation. First, calculate the number of moles of titanium(IV) chloride present in 500 tonnes.This is done by dividing the mass by the relative formula mass of the compound, giving 26,316 moles of TiCl4. The equation of the reaction shows that for every 1 mole of titanium chloride, 4 moles of sodium are required to produce 1 mole of titanium.Therefore, there are 104,264 moles of sodium required for the reaction. Since the mass of sodium is the same as its molar quantity, the mass of sodium required is 104,264 tonnes. Since the ratio of titanium produced to titanium chloride used is 1:1, the mass of titanium produced is 26,316 tonnes.This is equal to 24,000 tonnes when converted to kilograms. This process is known as stoichiometric calculations.To learn more about The maximum mass of titanium refer to:
https://brainly.com/question/30004075
#SPJ1
Is CO2 covalent or ionic or both?
Carbon dioxide is a covalent compound and not an ionic compound.
Why CO2 is covalent?Carbon dioxide has two covalent bonds between each oxygen atom and carbon atom, which is referred to as a double bond.
CO2 is not an ionic compound and Carbon dioxide is made of one carbon atom and two oxygen atoms. There are four covalent bonds in one molecule of co2. Carbon and oxygen are non-metals, therefore we know carbon dioxide is a covalent compound.
Carbon dioxide is a one-carbon compound, gas molecular entity and a carbon oxide. Carbon Dioxide is colorless, odorless and incombustible gas resulting from oxidation of carbon.
To know more about covalent bond, refer
https://brainly.com/question/3447218
#SPJ4