in general, which point has the highest convection heat transfer coefficient? laminar boundary layer transition region turbulen boundary layer

Pre-tensioning or post-tensioning procedures that apply compressive stress to the concrete result in prestressed concrete.

For a more flexible and long-lasting end result, steel tendons, such as high-strength wires or alloys, are stretched to reinforce the tension into the concrete substance. Families of importance and performance properties. To give the plastic a particular hue, pigments—insoluble organic or inorganic particles—are added to the polymer basis. Plasticizers are typically nonvolatile, high boiling, low molecular weight compounds that are added to a polymer to alter the mechanical properties and increase its processability, flexibility, and stretchability. Major Families & Performance Properties of Pigments. To give the plastic a particular hue, pigments—insoluble organic or inorganic particles—are added to the polymer basis.

Learn more about concrete here-

https://brainly.com/question/28903866

#SPJ4

The right one is Technician b says that voltage-drop testing includes cranking the engine, measuring the drop in voltage from the battery to the starter, and measuring the drop in voltage from the negative terminal of the battery to the engine block .

To learn more about voltage drop test refer to:

https://brainly.com/question/27851005

#SPJ4

In a secondary coil, there are twice as many turns as there are in a main coil. A transformer with a turns ratio of 2:1 will have 100 primary turns and 50 secondary turns.

As a result, 60 volts will be impressed on the secondary if the primary is at 120 volts. Therefore, by multiplying both sides by N p, we may find N s, which equals N pV s over V p. The voltage drop is produced by a step-down transformer, which has a secondary coil with only 30 turns and 400 turns multiplied by 9.00 volts divided by 120 volts.

Learn more about transformer here-

https://brainly.com/question/16971499

#SPJ4

The term “Flip-flop” relates to the actual operation of the device, as it can be “flipped” into one logical  Set state or “flopped” back into the opposing logical set.

A flip-flop is a device which stores a single bit (binary digit) of data; one of its two states represents a "one" and the other represents a "zero". Such data storage can be used for storage of state, and such a circuit is described as sequential logic in electronics.

STATIC RAM (SRAM) consists of flip-flops, a circuit composed of four to six transistors. Once a flip-flop stores a bit, it keeps that value until the opposite value is stored in it.

Hence, logical set is used.

To know more about Flip flop from the given link

https://brainly.com/question/4237777

#SPJ1

When considering all blended, compacted, sintered and infiltrated components, the components that are made from infiltrated parts have no porosity. These infiltrated parts are the strongest ones among the remaining processes.  Hence, the stainless steel components which are powdered, compacted, sintered, and infiltrated by copper are the strongest.

What is Stainless steel?

Steels that include at least 10.5% chromium, less than 1.2% carbon, and other alloying elements are known as stainless steels. Other elements, such as nickel, molybdenum, titanium, niobium, manganese, etc., can be added to stainless steel to further improve its mechanical and corrosion resistance.

Sintered steel alloys are increasingly being used in mechanical parts. However, the better mechanical and corrosion-resistant qualities needed for sintered materials can be obtained by lowering porosity. The copper infiltration technique is effective here.

A measured quantity of copper-base alloy is spread over the surface of a porous ferrous compact during the copper infiltration process. The two components are then sintered at a temperature (>2000°F), causing the copper alloy to melt and flow through capillary action into the porosity of the ferrous compact. After the cooling process is finished, the copper alloy permanently solidifies inside the ferrous framework.

The infiltration procedure increases density, seals the sintered components, and makes the part corrosion resistant. The mechanical properties (hardness, toughness, strength, etc.) are also enhanced by this process.

Learn more about stainless steel click here:

https://brainly.com/question/16102202

#SPJ4

Answer:

The correct answer is that both the technician a oil filter and b about turbocharger are correct.

Explanation:

The outside of the oil filter is a metal can with a sealing gasket that allows it to be tightly held against the engine’s mating surface. The engine’s oil pump moves the oil directly to the oil filter, where it enters from the holes in the perimeter of the base plate. The dirty oil is passed (pushed under pressure) through the oil filter media and back through the central hole, where it re-enters the engine.The buildup is transferred away from the highly stressed components by the engine oil filter, which prevents temperatures from rising to a point where the construction materials would soften or the turbo would completely mechanically collapse. The turbocharger can be completely destroyed in a matter of seconds if the engine oil supply is even briefly interrupted while the engine is operating at high speed.

to learn more about oil filters click the link below:

brainly.com/question/29306494

If we tried to further accelerate a Supersonic fluid with a diverging diffuser,  the pressure will decrease due to an increase in area. This can be described as :

dA/A = dP/ρV² (1-M²) for supersonic flow Mach Number, M: M > 11 - M² < 0 (dA/A) = -K (dP/ρV²)k = 1-M²

Supersonic flow fields have Mach numbers greater than one at every location. Supersonic flows are usually characterized by the presence of shock waves, which cause abrupt changes in flow characteristics and streamlines (in contrast to the smooth, continuous variations in subsonic flows).

Supersonic and subsonic relate to speeds that are faster or slower than the speed of sound, respectively. Supersonic means traveling faster than the speed of sound, which is 343.2 m/s (1,126 ft/s). Subsonic speeds are defined as anything moving slower than the speed of sound.

Learn more about supersonic:
https://brainly.com/question/8821985
#SPJ1

Answer: The vehicle dashboard includes the speedometer, tachometer, fuel gauge, temperature gauge, oil pressure gauge, and voltmeter.

Explanation:

Steel plate is installed to protect cables from being damaged by drywall screws or nails.

How to protect cables?

Armouring is offered which contain of one or two layers of galvanized steel wire or steel tape. Its goal is to prevent the cable from mechanical injuries while laying it or handling it.

Type of protection tools act as a protection agent and avoid us from many electrical damages. Commonly, these tools remove fire hazards and electrocution. Protection tools useful for the protection of circuits. Usually, this protection is caused by extreme voltage or current. A cable guard has function to cover an ethernet cable, a TV cable, a power cable, or any other kind of electrical cable available.

Learn more about how to protect cable at https://brainly.com/question/14574057

#SPJ4

The Java program will take two integers from the user and we are not assuming the user will always enter the smaller number first.

Step-by-step coding of the given problem:

import java.util.*;

class main{

public static void main(String args[])

{int n1,n2;

Scanner in=new Scanner(System.in);

System.out.print("Enter the starting number: ");

n1=in.nextInt();

System.out.print("Enter the ending number: ");

n2=in.nextInt();

System.out.println("The sum of the numbers from "+n1+" to "+n2+" is "+sum(n1,n2));

}

public static int sum(int n1, int n2)

{int i,sum=0,start,stop;

start=n2;

stop=n1;

if(n1<n2)

  {start=n1;

   stop=n2;

   }

for(i=start;i<=stop;i++)

    sum+=i;

return sum;

}

}

To learn more about Java Programming, visit: https://brainly.com/question/18554491

#SPJ9

The results of the calculations are (a) P = 37.97 kN and (b) P = 35.62 kN.

The surface won't be cut if you press the flat section of the knife against the fruit. The force is dispersed over a wide area.

Using the parameters and figure provided in the problem, we have:

A = b*h = 0.14*0.24 = 0.0336 m^2

S = (b*h^2)/6 = (0.14*0.24*0.24)/6 = 0.001344 m^3

q = 5400*0.0336 = 181.44 N/m

(a) The load P at 8.5 MPa = 8.5*106 Pa (allowable bending stress)

σ = M/S

M = *S thus equals 0.001344*8.5*106 = 11424 Nm.

Aside from that

M = (P*L/4) + (q*L^2)/8

11424 = (P*1.2/4) + (181.44*1.2^2)/8

11424 = 0.3*P + 32.6592

P = (11424-32.6592)/0.3 = 37.97 kN

(b) If (allowable shear stress) = 0.8 MPa, then the value of P is equal to 0.8*106 Pa.

(2*A*τ/3) = P/2 + q*L/2

(2*0.0336*0.8*10^6)/3 = P/2 + 181.44*1.2/2

17920 = P/2 + 108.864

P = (17920 - 108.864) * 2 = 35.62 kN.

Learn more about stress here-

https://brainly.com/question/13261407

#SPJ4

The use of double dashes is the correct way to mark False Starts in Full Verbatim.

Double dashes are used to distinguish the beginning and finish of a sequence that would otherwise be misunderstood. In dialogue, dashes are also used to indicate when a sentence has been cut off.

To indicate a range or that material has been incorporated into a statement, dashes can be used in place of parenthesis. Only in casual writing should dashes be used; in academic and business writing, commas, parenthesis, or colons should be used instead. A space should not come before or after a dash.

Therefore, False Starts should be marked in Full Verbatim with double dashes.

Learn more about the double dashes, refer to:

https://brainly.com/question/15820849

#SPJ6

A effective ground-fault current path  is an intentionally constructed, low-impedance electrically conductive path designed and intended to carry current during ground-fault conditions from the point of grounding on a wiring system to the electrical supply source.

To learn more about ground-fault current channel  refer,

https://brainly.com/question/28498355

#SPJ4

There are basically five types of welding namely:

a)Gas Metal Arc Welding (GMAW/MIG)

b)Friction welding,

c)ELECTRON BEAM WELDING

d) LASER BEAM WELDING

e) RESISTANCE WELDING

What is welding?

Welding is a fabrication process in which two or more parts are joined together using of heat, pressure, or both to form a joint as the parts cool. materials to be welded include metals, thermoplastics, and wood.

Types of welding processes

a)Gas Metal Arc Welding (GMAW/MIG)

Used mainly for joining metals like stainless steel, nickel, copper alloys, aluminum, titanium, and cobalt.

b)Friction welding

This is a  technique used to join materials using mechanical friction. this can be used to join wood, steel, and aluminum.

c)ELECTRON BEAM WELDING

This process uses a mean of high-velocity electrons to combine materials this can be used to join thick sections in the aerospace, automotive, rail, and nuclear power industry.

d)LASER BEAM WELDING

this is used to combine pieces of metal or thermoplastics.

e) RESISTANCE WELDING

This is a process that joins metals by applying pressure and passing a current through them for a period of time.

Learn more on welding from

https://brainly.com/question/21049525

#SPJ1

Consequently, RL=RTh is the need for maximal power dissipation over the load. In other words, the power dissipated across the load will be at its maximum if the value of load resistance is equal to the value of source resistance, or Thevenin's resistance.

According to the maximum power transfer theorem, when the load resistance is equal to the series resistance, the power transmitted to the load resistor is maximized. The critical point can be determined by evaluating the derivative of the power equation with respect to the load resistance. Define Equation 1 in relation to RL and set it equal to zero. Consequently, RL=RTh is the need for maximal power dissipation over the load. A crucial technique for successful system design is the maximum power theorem, also referred to as the maximum power transfer theorem.

To learn more about Thevenin's resistance click the link below:

brainly.com/question/12978053

#SPJ4

It is important not to rotate the crankshaft after the 'corrosion preventive mixture' has been put into the cylinders on engines prepared for storage because 'the seal of the corrosion preventive mixture will be broken.

Corrosion preventive mixture refers to the mixture that is put in place to prevent the occurrence of corrosion. Corrosion preventive mixtures are designed to protect substrates, materials, and metallic structures from the deterioration that results from the chemical or electrochemical interaction of a substance with its immediate surroundings. It can be stated as corrosion preventive mixtures refer to the solutions used in industries to protect against the depletion of the mechanical, chemical, and physical properties of a material that is normally caused by corrosion. Corrosion prevention mixtures are used in industries to maintain the effectiveness, safety, and reliability of materials. It also helps to reduce the expensive replacement processes required in case corrosion occurs.

You can leran more about corrosion at

https://brainly.com/question/489228

#SPJ4

The diameter is the distance along the circle's circumference that separates two locations on its edge. A 0.038 x 109 N shearing force is applied.

Any straight line segment that traverses a circle's centre and has its ends on the circle is said to have that circle as its diameter. It is also known as the circle's longest chord. The diameter of a sphere can be defined using either of the two methods.

It is an important circular measurement. In fact, it is one of the characteristics that distinguishes circles. The diameter is a measurement of the circumference of a circle taken from rim to rim through its center.

Calculate the area of a 0.95 cm diameter circle.

A = πr²

If A is not present, A = (0.95 cm/100 cm)2 =0.0095m

Increase this by the specified shearing stress.

Shearing force = (4 x 10x8 N/m2)(0.0095)

0.038 x 109 N shearing force

To learn more about Diameter refer to:

https://brainly.com/question/390660

#SPJ4

Answer:

Omg so long i will give later

average stress value in kpa with a 6 hz frequency and 5,371 kpa of pressure. 4,342

What does the term "sinusoidal function" mean?

A function that is based on the sine function, a periodic function that oscillates smoothly between high and low values, is referred to as a sinusoidal function. Since the cosine function is simply a horizontal shift of the sine function, sinusoidal functions can also be built on it. A function that describes some occurrence is a mathematical model. Since sinusoidal functions are periodic, they can be utilized as models for objects that display periodic behavior. In some applications of periodic phenomena, however, the concept of frequency is utilized in place of the period.

Explanation

y (+)= A0 + Bsin (wt)

A0= 5371 +3,313/2 =4,342

To learn more about sinusoidal function refer to

https://brainly.com/question/8240335

#SPJ4

Answer:

Explanation:

heat

Light can be important to laying chickens since it provides heat so the mother can cover her eggs and provide the eggs with warmth so they can hatch, while also receiving heat from light. It provides extra comfort.

Surface is not a factor in the pressing force. Thus, regardless of the press's load, the same force is always applied.

A press is nothing more than a flat bed with a mechanically or hydraulically controlled pressing ram or rod. To produce a metal-pressed item, you must insert two halves of a metal press tool into the press. The tool is then bolted to the work surface at the bottom and to the ram or rod at the top

Presses are widely employed to bend or straighten materials as well as to press two items, such as bearings or other metal shaft-fitted components, together or away. Some smaller presses, like C-frame presses, can also be used to keep materials together during assembly or remove sections for maintenance.

To learn more about press force refer to:

https://brainly.com/question/21496864

#SPJ4

The ratio of the least to highest stress is known as the stress ratio. 345 mpa is the greatest stress level.

Explain about the maximum stress level?

The mean stress is 60 mpa. The highest tensile stress and the minimum compressive stress, respectively, are denoted by the words "maximum stress" and "minimum stress." The stress range was established using the absolute difference between the highest and lowest stress.

Maximum stress level = 1/2 of the maximum and minimum stresses.

Then,

60 = 1/2 (Maximum stress minus Minimum stress)

230 = Maximum Stress plus Minimum Stress - (1)

As opposed to that,

Amplitude is= half of the maximum and minimum stresses.

120 = 1/2(Max. stress - Min. Stress) (Max. stress - Min. Stress)

460 equals Maximum Stress - Minimum Stress - (2)

Solving equations (1) and (2) yields:

Equation (1) + (2) 230 = Maximum stress + Minimum stress

460 = Maximum stress - Minimum stress

690 = 2 Maximum stress

690/2 = 345 mpa

To learn more about maximum stress level refer to:

https://brainly.com/question/13897375

#SPJ4

This is a typical current draw for a starter motor on a v-6 engine, according to technician B.

The starter motor is in charge of starting the engine during ignition and permitting the rest of the process. The starter motor engages and turns the engine over when the ignition is turned on, allowing the engine to inhale air. The starter is positioned low to the ground near the rear of the engine in a front-engine layout. The starter requires a strong electric current, which it obtains from the battery through thick wires. It cannot be turned on with a typical hand-operated switch since it needs a large switch to handle the enormous current. Labor costs should also be taken into consideration; they can range from $150 to $1,000. Costs for new starters might range from $80 to $350. A replacement starter for a typical vehicle costs about $500. It looks that your mechanic is billing you at the going cost for this service.

To learn more about starter motor refer to

https://brainly.com/question/17144616

#SPJ4

The smaller force is 20 Newtons.

Let, the magnitude of the smaller force be F Newton.

Now, the resultant force makes an angle of 90° with the smaller force. So, the angle between the resultant force and the larger force =

(120° - 90°) = 30°.

So, tan 30° = (F * sin 120°) / (40 + F * cos 120°)

(1 / √3) = {F * (√3) / 2} / {40 + F * (- 1 / 2)}

80 - F = 3F

4F = 80

F = 20.

So, the magnitude of the smaller force is 20 Newtons.

Learn more about force at:

https://brainly.com/question/25239010

The excludable interest is just $1,000 because Arthur's modified adjusted gross income exceeds the applicable dollar limit by $5,000.

Tax can be defined as the sum that is received by an individual or an organization on its profits or other income, and it is then received by the government.

Interest on education savings bonds is tax-free up to a maximum of $6,000 per bond.

$5,000 is the excess of the modified adjusted gross income.

Arthur should not exceed the phase-out limits in terms of adjusted gross income.

As a result, since Arthur's modified adjusted gross income is $5,000 more than the applicable dollar limit, the excludable interest is $1,000.

Learn more about tax, here:

https://brainly.com/question/16423331

#SPJ1

When an aircraft is loaded 90 pounds or more than the maximum certificated gross weight and fuel (avgas) is drained to bring the aircraft weight within limits, 15 gallons of fuel should be drained.

To learn more about aircraft loaded moment refer to:

https://brainly.com/question/28250039

#SPJ4

The amount of water that flows through a specific surface in a unit of time is known as the volumetric flow rate. Or, to put it more simply, how quickly water moves through a pipe.

Volumetric flow rate is influenced by friction loss, water velocity, and pipe diameter. As is well known, volumetric flow determines how much space the molecules in a flowing gas occupy, while mass flow counts the number of molecules in the gas. Volumetric flow rates can significantly change in response to changes in pressure and/or temperature because gases are compressible and temperature has a large impact on them. Vacuum technology typically deals with three different types of flow: molecular flow, viscous or continuous flow, and the flow at their intersection.

Learn more about volumetric here-

https://brainly.com/question/14746646

#SPJ4