Light of intensity I0 is polarized vertically and is incident on an analyzer rotated at an angle from the vertical. Find the angle if the transmitted light has intensity
I = (0.750)I0, I = (0.500)I0, I = (0.250)I0, and I = 0.
(Enter your answers in degrees.)

Answer:

Maximum height = 2040 m

Explanation:

We can solve the problem using kinematics.

Consider the vertical motion of the object and use the equation:

[tex]\boxed{v^2 = u^2 + 2as}[/tex]

where:

• v = final velocity      (0 m/s, because when the object is at max. height, it has no vertical velocity)

• u = initial velocity    (400sin30° m/s ⇒ vertical component of 400 m/s at 30° to horizontal)

• a = acceleration      (-9.81 m/s²; considering upward acceleration to be negative)

• s = displacement    (? m; this represents the max. height of the object),

Substitute the values into the equation and solve for s :

[tex]0^2 = (400 sin (30 \textdegree))^2 + 2(-9.81)(s)[/tex]

⇒ [tex]2(9.81)(s) = (400 sin (30 \textdegree))^2[/tex]

⇒  [tex]s = 2040 \space\ m[/tex]     (3 s.f.)

(a) The magnitude of the net magnetic force per unit length on the top wire is μI²/πd.

(b) The magnitude of the net magnetic force per unit length on the middle wire is zero.

(c) The magnitude of the net magnetic force per unit length on the bottom wire is 3μI²/4πd.

The magnitude of the net magnetic force per unit length on the top wire is calculated as follows;

F₁/L = (μI₁/2π) x (I₂/d + I₃/d)

F₁/L = (μI/2π) x (I/d + I/d)

F₁/L = (μI/2π) x (2I/d)

F₁/L = μI²/πd

The magnitude of the net magnetic force per unit length on the middle wire is calculated as follows;

F₂/L = (μI₂/2π) x (I₃/d - I₁/d)

F₂/L = (μI/2π) x (I/d -  I/d) = 0

The magnitude of the net magnetic force per unit length on the middle bottom is calculated as follows;

F₃/L = (μI₂/2π) x (I₁/d + I₂/d)

F₃/L =  (μI/2π) x (I/2d + I/d)

F₃/L =  (μI/2π) x (3I/2d)

F₃/L =  3μI²/4πd

Thus, the magnitude of the net magnetic force per unit length on the top wire is μI²/πd.

The magnitude of the net magnetic force per unit length on the middle wire is zero.

The magnitude of the net magnetic force per unit length on the bottom wire is 3μI²/4πd.

Learn more about magnetic force here: https://brainly.com/question/13277365

#SPJ1

Answer:

Tension in the vertical rope: approximately [tex]613 \; {\rm N}[/tex].

Tension in the horizontal rope: approximately [tex]3.74 \times 10^{3}\; {\rm N}[/tex].

Assumption: [tex]g = 9.81\; {\rm N \cdot kg^{-1}}[/tex].

Explanation:

Since the system is not moving, the tension in the vertical rope would be equal to the weight of the crate:

[tex]\begin{aligned}\text{weight of crate} &= m\, g \\ &= 62.5\; {\rm kg} \times 9.81\; {\rm N \cdot kg^{-1}} \\ &= 613.25 \; {\rm N}\end{aligned}[/tex].

Note that [tex]\theta = 57.7^{\circ}[/tex] is the angle between the beam (the lever) and the vertical rope. The torque that this vertical rope exert on the beam would be:

[tex]\begin{aligned} \tau &= r\, F\, \sin(\theta) \\ &=(7.65\; {\rm m}) \, (613.25\; {\rm N})\, (\sin(57.7^{\circ})) \\ &\approx 3.965 \times 10^{3}\; {\rm N \cdot m} \end{aligned}[/tex].

This torque is in the clockwise direction.

The weight of the beam ([tex]m = 116\; {\rm kg}[/tex]) would be:

[tex]\begin{aligned}\text{weight of beam} &= m\, g \\ &= 116 \; {\rm kg} \times 9.81\; {\rm N \cdot kg^{-1}} \\ &= 1.138 \times 10^{3}\; {\rm N}\end{aligned}[/tex].

Note that [tex]\theta = 57.7^{\circ}[/tex] is also the angle between the beam and the direction of the (downward) gravitational pull on this. Since this beam is uniform, it would appear as if the weight of this beam is applied at the center of this beam (with a distance of [tex](7.65\; {\rm m}) / 2[/tex] from the pivot.) Thus, the torque gravitational pull exerts on this beam would be:

[tex]\begin{aligned} \tau &= r\, F\, \sin(\theta) \\ &= \genfrac{(}{)}{}{}{7.65\; {\rm m}}{2} \, (1.138 \times 10^{3}\; {\rm N})\, (\sin(57.7^{\circ})) \\ &\approx 3.679 \times 10^{3}\; {\rm N \cdot m} \end{aligned}[/tex].

This torque is also in the clockwise direction.

The tension in the horizontal rope would need to supply a torque in the counterclockwise direction. The magnitude of that torque would be approximately:

[tex]\begin{aligned} & 3.965\times 10^{3}\; {\rm N \cdot m} + 3.679\times 10^{3}\; {\rm N \cdot m} \\ \approx \; & 7.645 \times 10^{3}\; {\rm N \cdot m} \end{aligned}[/tex].

Note the angle between the direction of this tension and the beam is [tex](90^{\circ} - \theta) = 32.3^{\circ}[/tex]. This force is applied  [tex](7.65\; {\rm m}) / 2[/tex] from the pivot. Hence, achieving that torque of [tex]7.645 \times 10^{3}\; {\rm N \cdot m}[/tex] would require:

[tex]\begin{aligned} F &= \frac{\tau}{r\, \sin(90^{\circ} - \theta)} \\ &\approx \frac{7.645\times 10^{3}\; {\rm N \cdot m}}{((7.65\; {\rm m}) / 2) \times \sin(32.3^{\circ})} \\ &\approx 3.74 \times 10^{3}\; {\rm N} \end{aligned}[/tex].

Hi there!

Part A.

To solve this part, all we need to do is a summation of vertical forces.

We have the following acting on the beam :
- Force of gravity (Fg, down)
- Force of tension from the rope holding the box (T, down)
- Force exerted by pivot (Py, up)

These sum to zero because the beam is not accelerating vertically.

[tex]\Sigma F = -F_g - T + P_y = 0[/tex]

[tex]P_y = F_g + T[/tex]

The tension force is equal to the box's weight because the forces on the box are balanced. Let's use values and solve.

[tex]P_y = 49(9.8) + 49(9.8) = \boxed{960.4N}[/tex]

Part B.

We must begin by doing a summation of torques. Placing the pivot point at the pivot, we have the following present:
- Force of gravity acting at the center of mass of the rod (CC, at L/2)

- The tension of the horizontal cable acting at the end of the rod (CCW, at L)

- The force of tension in the rope holding the box (CC, at 3L/4)

Since the rod is not rotating, these torques sum to zero.

The equation for torque is:
[tex]\tau = r \times F[/tex]

This is a cross-product, and you must find the lever arm (perpendicular distance between pivot and line of action of force). We will need to use trigonometry for this.

Now, let's find the torque from all three of these forces.

- Force of gravity at center:

The perpendicular distance between the force of gravity and the pivot point is the cosine with respect to the angle made with the floor.

[tex]\tau = Mg\frac{L}{2}cos(\theta) = 49(9.8)*\frac{2.2}{2} cos(18) = 502.367 Nm[/tex]

- Tension of horizontal cable:

The lever arm is the sine with respect to the angle. We will still have to solve for the value of 'T'.

[tex]\tau = TLsin\theta = T(2.2)sin(18) = 0.68T[/tex]

- Tension of rope holding box:
The tension is equal to the weight of the box since the box isn't accelerating. Thus, the torque would be:
[tex]\tau = Mg(\frac{3L}{4}) = 49(9.8)*\frac{3(2.2)}{4}cos(18) = 753.55 Nm[/tex]

Summing with clockwise torques + and counterclockwise -:
[tex]\Sigma \tau = 502.367 + 753.55 - 0.68 T = 0 \\\\1255.917 = 0.68T\\T = \boxed{1847.38 N}[/tex]

Part C.

This part is a lot easier than it seems. All we need to do is a summation of horizontal forces.

We only have two:
- The horizontal tension in the cable to the left (1847.38 N)

- The horizontal force exerted by the pivot on the beam to the right

These two balance out because there is no acceleration of the beam horizontally, so:
[tex]\Sigma F = P_x - T = 0 \\\\P_x = T\\\\P_x = \boxed{1847.38 N}[/tex]

**to the right

Answer:

a) 960.4 N

b) T= 5/4 Mg CotanΘ

c) 1847. 38

Explanation:

a) Py= 2Mg

=2(49 x 9.8)

= 960.4

b) T= (Mg x 1/2 x cos Θ + Mg x 3/4 x cos Θ) / sin Θ

T= 5/4 X Mg cotanΘ

c) T= (5/4) x (49 x 9.8) cotan (18)

T= 1847.37954

= 1847.38

(a) The maximum height reached by Jane is 1.8 m.

(b) The length of the vine will affect the time of her motion, which will impact on speed and maximum height attained.

apply the principle of conservation of energy;

P.E = K.E

mgh = ¹/₂mv²

h = v²/2g

where;

h = (6²)/(2 x 9.8)

h = 1.84 m

Assuming Jane to be in simple harmonic motion, the time of motion is calculated as;

T =  2π√(L/g)

where;

Thus, the length of the vine will affect the time of her motion, which will impact on speed and maximum height attained.

Learn more about maximum height here: https://brainly.com/question/12446886

#SPJ1

Hello!

a)

To begin, let me first clarify that no section of the wire along the axis of the point 'P' will contribute to the magnetic field (Aka, the straight part of the wire) because the radius vector and current vectors would be parallel.

Now, let's use Biot-Savart's Law:
[tex]dB = \frac{\mu_0}{4\pi }\frac{id\vec{l}\times \hat{r}}{r^2}[/tex]

B = Magnetic field strength (? T)
μ₀ = Permeability of free space (Tm/A)

i = Current in wire ('I' A)
dl = differential length element

r = distance from wire to point P ('R' m, remains constant!)

We can rewrite Biot-Savart as:
[tex]B = \frac{\mu_0}{4\pi } \int \frac{id\vec{l}\times \hat{r}}{r^2}[/tex]

First, let's mind the cross-product.

The angle between the radius vector (Along 'R') and the current vector is ALWAYS 90° since the two vectors are perpendicular along the arc. At a certain point, think about the current as being "tangential" to the differential length and thus perpendicular to the radius.

Therefore, we can disregard the cross-product since sin(90) = 1.

Let's plug in what we already know, replacing 'dl' with 'ds' since this is an arc:

[tex]B = \frac{\mu_0}{4\pi } \int \frac{ids}{R^2}[/tex]

We have a semi-circle, so we are integrating from 0 to π radians.

[tex]B = \frac{\mu_0}{4\pi } \int\limits^{\pi}_{0} {\frac{ids}{R^2}}[/tex]

Simplifying to make the integral easier, we can take constants out of the integral.

[tex]B = \frac{\mu_0i}{4\pi R^2 } \int\limits^{\pi R}_{0} {} \, ds[/tex]

Evaluating:
[tex]B = \frac{\mu_0i}{4\pi R^2} (\pi R- 0) = \boxed{\frac{\mu_0 i}{4R}}[/tex]

b)

Using the current Right-Hand-Rule at the top of the arc, point your thumb to the right. Curl your fingers as if you are gripping the wire over the top and all the way over to the other side of the wire (Where point 'P' would be). Your fingers should point INTO THE PAGE.

The mechanical energy lost is 353.28 Joules . The distance he slid off is 0.16m.

we know:-

Mass = 69 kg

Speed = 3.2 m/s

Coefficient of friction ( ratio of friction force and normal force ) = 0.70

Acceleration due to gravity, g = 9.8 m/s^2

(a) To determine the amount of mechanical energy that is lost because of friction acting on the runner, we would calculate the change in kinetic energy:

[tex]KE = \frac{1}{2} m (v-u)^{2}[/tex]

      [tex]= \frac{1}{2} 69 ( 3.2-0 )^{2}[/tex]

      [tex]= 353.28[/tex] Joules

Mechanical energy = 353.28 Joules

(b) To determine how far (distance) the runner slide:

acceleration = ug

                     [tex]= 3.2[/tex] × [tex]9.8[/tex]

                     [tex]= 31.36[/tex] [tex]m/s^{2}[/tex]

distance ,

[tex]V^{2} = U^{2} + 2aS[/tex]

[tex]( 3.2)^{2} = 0 + 2 ( 31.36) S[/tex]

[tex]10.24 = 62.72 S[/tex]

[tex]S = {\frac{10.24}{62.72} }[/tex]

Distance, S = 0.16 m  

Learn more about mechanical energy here:-  

https://brainly.com/question/8630757

#SPJ1        

Answer:

11.31 [m/s].

Explanation:

1. the required velocity can be calculated according to

[tex]V=\frac{V_{horizontal}}{sin45};[/tex]

2. according to the formula above:

V=8*1.41≈11.3137085 [m/s].

The Aster's final position from her initial position is 64 m

The angle is 300° and She has to head in West north direction to return to her initial position

The displacement is the distance travelled in a specific direction. Displacement is a vector quantity.

Given that Aster walks first 70 m in the direction 37° north of east, and then walks 82 m in the direction 20° south of east, and finally walks 28 m in the direction 30° west of north.

This can be solved by using bearing method. Cosine formula will be the best to solve for the distance D.

[tex]D^{2}[/tex] = [tex]70^{2}[/tex] + [tex]82^{2}[/tex] - 70 x 82 x Cos (37 + 20)

[tex]D^{2}[/tex] = 4900 + 6724 - 5740Cos57

[tex]D^{2}[/tex] = 11624 - 3126.23

[tex]D^{2}[/tex] = 8497.8

D = [tex]\sqrt{8497.8}[/tex]

D = 92.2 m

a) The Aster's final position from her initial position is 92.2 - 28 = 64 m

The angle = 270° + 30° = 300°

b) She has to head in West north direction to return to her initial position

Learn more about Displacement here: https://brainly.com/question/114551

#SPJ1

A round cactus with many spines is the adaptation of a cactus that protects it from predators.

A cactus, unlike other plants, has unique adaptations in its roots, leaves, and stems that allow it to flourish in hot and dry surroundings.

The one adaptation that protects the cactus from predators is spines.

A cactus does not have any parts that resemble leaves if you could look at one closely.

Instead, the leaves are transformed into spines, which protrude from the plant's tiny bumps known as areoles.

Herbivores that live in the desert may be enticed to eat the cactus. The spines prevent these predators by modifying leaves into spines.

Other than protection, Spines perform many functions like

1) Since evaporation is a problem in a desert since water is scarce, the spines prevent excessive evaporation.

2)  The spines also impede airflow and prevent evaporation by trapping air.

3) Collecting dew from the early-morning fog is another crucial job that the spines do.

The gathered dew turned into liquid water and ran down to the earth below. The plant then absorbs this water.

Hence, the adaptation of a cactus that protects it from predators is round cactus with many spines.

Learn more about Adaptation of cactus here https://brainly.com/question/12501143

#SPJ1

The correct option is D.   The initial momentum of the blue and green train combined during the collision is 200 kgm/s.

Apply the principle of conservation of linear momentum as follows;

Pi = m1v1 + m2v2

where;

Pi = (50 x 4) + 30(0)

Pi = 200 kgm/s

Thus, the initial momentum of the blue and green train combined is 200 kgm/s.

Learn more about momentum here: https://brainly.com/question/7538238

#SPJ1

Answer:

The metalloids are located on the right side of the periodic table in a "step-like" arrangement.

All of the possible metalloids are:

boron (B), silicon (Si), germanium (Ge), arsenic (As), antimony (Sb), tellurium (Te), and polonium (Po)

(a) The normal force exerted by the road on the car is 8,506.2 N.

(b) The normal force exerted by the car on the driver is 394.9 N.

(c) The speed of the car at which the normal force on driver is zero is 29.2 m/s.

The normal force exerted by the road on the car is calculated as follows;

Normal force = weight of the car - centripetal force of car

Weight of the car = (1400 x 9.8) = 13,720 N

Centripetal force of the car = (1400 x 18²)/87 = 5,213.8 N

Normal force = 13,720 N -  5,213.8 N

Normal force = 8,506.2 N

Normal force = weight of driver - centripetal force of driver

Weight of driver = (65 x 9.8) = 637 N

Centripetal force of driver = (65² x 18²)/(87) = 242.07 N

Normal force =  637 N - 242.07 N = 394.9 N

N = mg - mv²/r

0 = mg - mv²/r

mv²/r = mg

v²/r = g

v² = rg

v = √rg

v = √(87 x 9.8)

v = 29.2 m/s

Thus, the normal force exerted by the road on the car is 8,506.2 N.

The normal force exerted by the car on the driver is 394.9 N.

The speed of the car at which the normal force on driver is zero is 29.2 m/s.

Learn more about normal force here: https://brainly.com/question/14486416

#SPJ1

The total electric potential energy is [tex]\frac{kq_{1} q_{3} }{r_{13} } + \frac{kq_{2} q_{3} }{r_{23} } + \frac{kq_{1} q_{2} }{r_{12} }[/tex].

Electric Potential Energy of a System of Charges :

The system's electric potential energy is equal to the amount of work necessary to create a system of charges by guiding them toward their designated locations from infinity against the electrostatic force without accelerating them. The symbol for it is U.U=W=qV. Electrostatic fields are conservative, therefore the work is independent of the path.

Assume three charges q₁ , q₂ and q₃ bring from infinity to point P.

To bring  q₁ no work is done,

[tex]V_{p} = \frac{kq_{1} }{r_{1} }[/tex]

where, V = electric potential energy.

            q = point charge.

            r = distance between any point around the charge to the point charge.

           k = Coulomb constant; k = 9.0 × 109 N.

Now bring q₂,

[tex]V_{2} = \frac{kq_{2} }{r_{2} }[/tex]

Work done by q₁ ;

[tex]W_{1} = V_{p} q_{2} = \frac{kq_{1}q_{2} }{r_{12} }[/tex]

Now bring  q₃,

[tex]V_{3} = \frac{kq_{3} }{r_{3} }[/tex]

Work done on q₃ by q₁ and q₂

[tex]W= q_{3} [ V_{1} + V_{2} ][/tex]

    [tex]=\frac{kq_{1} q_{3} }{r_{13} }[/tex][tex]+ \frac{kq_{2} q_{3} }{r_{23} } + \frac{kq_{1}q_{3} }{r_{12} }[/tex]

This work done is stored in the form of potential energy.

∴U=W= potential energy of three systems.

Learn more about electric potential energy here:

https://brainly.com/question/15801030

#SPJ1

The total electric potential energy is [tex]\frac{kq1q3}{r13} + \frac{kq2q3}{r23} + \frac{kq1q2}{r12}[/tex]

Electric Potential Energy of a System of Charges

The labor required to establish a system of charges by guiding them toward their intended positions from infinity against the electrostatic force without accelerating them is equal to the electric potential energy of the system. Its identifier is U.U=W=qV. Due to the conservatism of electrostatic fields, the work is independent of the path.

Consider having three charges. Q1, Q2, and Q3 bring point P from infinity.

No work has been done to bring q1,

[tex]V_{1} = \frac{kq1}{r1}[/tex]

where, V = electric potential energy.

           q = point charge.

           r = distance between any point around the charge to the point charge.

          k = Coulomb constant; k = 9.0 × 109 N.

Now bring q₂,

[tex]V_{2} = \frac{kq2}{r2}[/tex]

Work done by q₁ ;

W1 = [tex]V_{p} q2[/tex] = [tex]\frac{kq1q2}{r12}[/tex]

Now bring  q₃,

[tex]V_{3} = \frac{kq3}{r3}[/tex]

Work done on q₃ by q₁ and q₂

W= q3{[tex]V_{1} + V_{2}[/tex]}

W = [tex]\frac{kq1q3}{r13} + \frac{kq2q3}{r23} + \frac{kq1q2}{r12}[/tex]

This work done is stored in the form of potential energy.

∴U=W= potential energy of three systems.

Learn more about electric potential energy here: https://brainly.com/question/15801030

#SPJ1

The required horsepower engine is 32 horsepower.

The force of the 30 skiers is calculated as follows:

Mass of the skiers = 30 * 67kg = 2010 kg

Net force acting on the skiers along the x-axis

where f is the frictional force

The kinetic frictional force, f = μN

where

μ = The coefficient of the kinetic friction

N = normal reaction

Net force acting on the skiers along y axis, the

Fy = ma

N = mg cos θ

Substituting for N above

f = μk mg cos θ

Substituting for f in  (1)

F = mg sin θ + μk mg cos θ

F = mg(sinθ + μk cos θ)

Work done by the engine in pilling up the skiers, W = Fx

W = mg ( sinθ + μk cos θ)x

x = 300 m

W = (2010 kg) (9.81 m/s²) (sin 23° + (0.10) cos 23°) (300 m)

Work done, W = 2.86 * 10⁶ J

Time taken, t = 2.0 * 60sec = 120 s

1 horsepower = 746 W

Power = 2.86 * 10⁶/ 120 * 1/746

Power = 31.9 horsepower

In conclusion, the power of the engine is the ratio of the work done and time taken.

Learn more about power and work done at: https://brainly.com/question/1634438

#SPJ1

Answer:  Two planets X and Y travel counterclockwise in circular orbits about a star, as seen in the figure. The radii of their orbits are in the ratio 4:3. At some time, they are aligned, as seen in (a), making a straight line with the star. Five years later, planet X has rotated through 88.0°, as seen in (b). Then, at an angle 135.48°, the planet Y rotated through during this time.

Explanation: To find the answer, we need to know about the Kepler's third law of planetary motion.

                                      T² ∝ r³

                 [tex]\frac{r_1}{r_2}=\frac{4}{5} \\\frac{T_1}{T_2} =(\frac{r_1}{r_2})^{3/2}\\[/tex]

                  [tex]T=\frac{2\pi }{w}[/tex] where, w is the angular velocity.

                           [tex]\alpha[/tex] =wt.

                   [tex]\frac{T_x}{T_y}=\frac{w_y}{w_x}\\thus,\\\frac{w_y}{w_x}=(\frac{r_1}{r_2})^{3/2}[/tex]

                     [tex]\frac{\alpha _y}{\alpha _x} = (\frac{r_1}{r_2})^{3/2}\\where,\\\alpha _x=\frac{88^0}{5 yrs} because,\\here, angle \beta_x =88^0.\\[/tex]

                     [tex]\alpha _y=\frac{88}{5yrs} *(\frac{4}{3} )^{3/2}=\frac{135.48^0}{5yrs} .\\thus,\\\beta _y=135.48^0.[/tex]

Thus, we can conclude that the angle rotated by planet Y during 5 yrs will be 135.48 degrees.

Learn more about the Kepler's third law of planetary motion here:

https://brainly.com/question/28105769

#SPJ4

The planet Y then rotated through at this time at an angle of 135.48°.

In order to understand the solution, we must be familiar with Kepler's third law of planetary motion.

                              T² ∝ r³

                                  [tex]\frac{R_1}{R_2}=\frac{4}{5} \\\frac{T_1}{T_2}=(\frac{4}{5} ) ^{\frac{3}{2} }[/tex]

                                [tex]T=\frac{2\pi }{w}[/tex]

where w is the angle of rotation per time.

                                     [tex]\alpha[/tex]=wt.

                                   [tex]\frac{w_y}{w_x} =(\frac{4}{5} ) ^{\frac{3}{2} }[/tex]

                                   [tex]\frac{\alpha _y}{\alpha _x}=(\frac{4}{3} ) ^{\frac{3}{2} } , where\\\alpha _x=\frac{88}{5yrs} \\[/tex]

                           [tex]\alpha _y=\frac{88}{5yrs} *(\frac{4}{3} ) ^{\frac{3}{2} }=\frac{135.48}{5yrs}[/tex]

Thus, we may infer that planet Y will revolve at an angle of 135.48 degrees during the course of five years.

Learn more about the Kepler's law of planetary motion here:

https://brainly.com/question/28105769

#SPJ1

Answer:

Higher levels of organization are built from lower levels.

Molecules combine to form cells.

Cells combine to form tissues.

Tissues combine to form organs.

Organs combine to form organ systems,

and organ systems combine to form organisms.

Explanation:

Hope it helps.

0.02020 ohm is the resistance of a carbon rod at 25.8 ∘C if its resistance is 0.0200 Ω at 0.0 ∘C.

A resistor is an electrical component that controls or restricts how much electrical current can pass across a circuit in an electronic device. A specified voltage can be supplied via resistors to an active device like a transistor.

The temperature of the resistor varies based on the variation in the temperature. The equation that describes the relationship between the two of them is:

R = R0[1+ alpha(T-T0)]  where:

R is the new resistance we are looking for

alpha is the temperature coefficient of resistance. For carbon rod, alpha = ₋ 4.8 x [tex]10^{-4}[/tex](1/°c)

T0 is the standard temperature =25.8°C

R0 is the resistance at T0 = 0.0200 ohms

T is the temperature at which we want to get R = 0

Substitute in the equation to get R as follows:

R = 0.0200 [1+( ₋ 4.8 x [tex]10^{-4}[/tex]) (0-25.8)] = 0.02020 ohm

To know more about resistance refer to: https://brainly.com/question/11431009

#SPJ1

5.8 moles of nitrogen gas are needed to pressurize the air bag.

= (2.37×60)/(0.0821×298)

= 5.8 moles

Thus, we can conclude that 5.8 moles of nitrogen gas are needed to pressurize the air bag.

Learn more about the ideal gas here:

brainly.com/question/20348074

#SPJ1

Answer:

The Fundamental Quantity is a physical quantity that exists independently and cannot be expressed by any other physical quantity.

Explanation:

Examples of these could be : Length, electric current and mass

Hope this helps! :)

In order for the refrigerator not to tip over, the maximum acceleration of  1.86 m/s² must not be exceeded.

The term acceleration has to do with the rate at which velocity changes with time.

We have to take the moments at the tipping point of rotation as follows;

Clockwise moment = Anticlockwise moment

Hence;

F₂ * 1.58 m = F₁ * 0.67 m

The weight at half the width= 30 cm or 0.3 m

Height of refrigerator = 158 cm 0r 1.58 cm

Then;

m * a * 1.58 = m * 9.81 * 0.30

a = 1.86 m/s²

In order for the refrigerator not to tip over, the maximum acceleration of  1.86 m/s² must not be exceeded.

Learn more about acceleration: brainly.com/question/14344386

#SPJ1

Big bang happened about 13.7 billion years ago in our universe.

According to the big bang theory, about 13.7 billion years ago, an explosive expansion began, expanding our universe outwards faster than the speed of light.

According to the flat model, the universe is infinite and will continue to expand forever because the universe is expanding.

Cosmic background radiation is a weak radio-frequency radiation that is traveling through outer space in every direction. It is the residual radiation of the big bang, when the universe was very hot.

The Big Bang theory predicts that the early universe was a very hot place and that as it expands, the gas within it cools. Thus the universe has all over radiation which is called the “cosmic microwave background".

Learn more about big bang here: https://brainly.com/question/10865002

#SPJ1

Answer:

Explanation:

——»To measure centimeters, we can use ruler.

B. The normal force that is exerted on the coaster by the track at the lowest point is 4.7 x 10⁴ N.

Fₙ = mg + mv²/r

where;

Fₙ = (2,000 x 9.8) + (2,000 x 18²)/24

Fₙ = 46,600 N

Fₙ =  4.7 x 10⁴ N

Thus, the normal force that is exerted on the coaster by the track at the lowest point is 4.7 x 10⁴ N.

Learn more about normal force here: https://brainly.com/question/14486416

#SPJ1

Answer:

pictures please

Explanation:

I need a picture so I can tell you

As, per the buoyancy force,the volume that the balloon should have is 2863[tex]m^{3}[/tex]

What is buoyancy force?

Air buoyancy is the upward force exerted on an object by the air that is displaced by object. Air buoyancy is responsible for the buoyancy created by the displaced air.

[tex]F_{b}[/tex] = -Vρg ,       where V= volume of the object

                                   ρ = density of the object

                                   g = acceleration due to gravity

                                   [tex]F_{b}[/tex] = buoyant force

The buoyancy force must be equal to the total load lifted

ρ[tex]_{He}[/tex] × V × g + 269 + 2910 = ρ[tex]_{air}[/tex] × V × g

0.179 × V + 3179 = 1.29 V

0.179V + 3179 = 1.29V

0.179V- 1.29V = - 3179

1.11V = 3179

On solving , we get

V = 2863 [tex]m^{3[/tex]

Therefore, the volume that the balloon should have is 2863[tex]m^{3}[/tex].

Learn more about buoyancy force here;

https://brainly.com/question/15187724

#SPJ1

(a) The location of a point where the electric field is zero is at the center of the triangle which is equal to ¹/₆√3a.

(b) The magnitude and direction of the electric field at the top corner due to the two charges at the base is  1.732 kq/a².

The electric field is zero at the center of the equilateral triangle whose magnitude is equal to √3a/6.

E = E₁ + E₂

where;

E = kq/a²[(cos 60i + sin 60j) + (-cos 60i + sin 60j)]

E = kq/a²[2(sin 60j)] = 1.732 kq/a²

Thus, the location of a point where the electric field is zero is at the center of the triangle which is equal to ¹/₆√3a.

The magnitude and direction of the electric field at the top corner due to the two charges at the base is  1.732 kq/a².

Learn more about electric field here: https://brainly.com/question/14372859

#SPJ1