The next step to complete in excel worksheet procedure should be pick the color set he wants.
A group of cells arranged in rows and columns is referred to as a worksheet in Excel documents. It is the work surface that you use to input data. Each worksheet functions as a massive table for organizing data with 1048576 rows and 16384 columns. A workbook typically has numerous worksheets with connected content, but only one of them is open at any given moment.
Each worksheet contains a sizable number of cells that can be formatted and given values. Worksheet cells can be added, modified, and deleted using the Cells property.
Worksheet cells are arranged in rows and columns. A worksheet's API lets you add, edit, and remove rows and columns.
To know more about worksheet click here:
https://brainly.com/question/1024247
#SPJ4
which internet protocol security (ipsec) core component negotiates, creates, and manages security associations?
Layer 2 Tunneling Protocol (L2TP) is the essential component of internet protocol security (ipsec) that negotiates, builds, and manages security associations.
What is the internet protocol?The Internet Protocol (IP) is a protocol, or set of rules, that is used to route and address data packets so that they can travel across networks and arrive at their intended destination.
Layer 2 Tunneling Protocol (L2TP) connections, also known as virtual lines, enable corporate network systems to manage the IP addresses assigned to remote users, resulting in cost-effective access for remote users.
Therefore, L2TP is a critical component of internet protocol security (ipsec) that negotiates, establishes, and manages security associations.
Learn more about the Internet Protocol, refer to:
https://brainly.com/question/27581708
#SPJ1
3. [5 pts] what are the differences among interrupt-driven i/o, memory-mapped i/o, direct memory access (dma), and channel i/o? at least provide 2 differences for each i/o.
The outcome of the I/O instructions written in the computer program is what drives programming I/O.
The outcome of the I/O instructions written in the computer program is what drives programming I/O. By informing the interface to send an interrupt request signal whenever data is available from any device using the interrupt facility and special commands. The speed of the CPU determines how quickly data can be transferred between a fast storage medium, like a magnetic disk, and a memory unit.
Since we can see in the example above, the CPU is kept busier than necessary. Using an interrupt-driven technique for data transfer can probably prevent this situation. by informing the interface to send an interrupt request signal whenever data is available from any device using the interrupt facility and specific commands.
The CPU can continue running any other programs in the interim. The interface continues to keep an eye on the object. When the device is ready to transfer data, it sends a signal to the computer asking for an interrupt.
To know more about CPU click here:
https://brainly.com/question/16254036
#SPJ4
When Stacy tries to delete the field "Image,” in the Design view image below, she receives no warning message and the field deletes. But when she attempts to delete "BotanicalOrigin,” a warning message appears. Which best explains this difference?
a. “Image” is a primary key, and “BotanicalOrigin” is not a unique identifier.
b. “Image” is not a unique identifier, but “BotanicalOrigin” is a primary key.
c. “Image” contains no data, but “BotanicalOrigin” does contain data.
d. “Image” contains data, but “BotanicalOrigin” does not contain data.
When Stacy attempts to delete "Botanical Origin,” a warning message appears. The best explanation of the difference is “Image” is not a unique identifier, but “Botanical Origin” is a primary key. The correct option is b.
What is the primary key?The column or columns that each row in a table uses to uniquely identify itself is known as the primary key. For Optim to insert, update, restore, or delete data from a database table, the table must contain a primary key. The primary keys set for the database are used by Optim.
Therefore, the correct option is b.“Image” is not a unique identifier, but “Botanical Origin” is a primary key.
To learn more about the primary key, refer to the link:
https://brainly.com/question/27170818
#SPJ1
when an access point configured to use eap first discovers a new client the first thing the access point does is:
The user is required to authenticate against a login server when an access point set up to use EAP discovers a new client.
You can choose the computer that executes commands and handles procedures using the Server Login dialog box. You can decide between a nearby computer and a distant server. In the list, you can add, change, or remove remote servers. An ID and password are often required for remote servers, and occasionally a domain name is also required.
Any device that manages remote logins to create a point-to-point protocol connection is referred to as a network access server (NAS). Some individuals refer to these gadgets as remote access servers or media access gateways.
Whatever name you give them, these tools manage authentication and make sure users can access the resources they require. They can be used to connect users to the internet or a phone system.
To know more about server click here:
https://brainly.com/question/14617109
#SPJ4
Answer:
Explanation:
Using the Server Login dialog box, you may select the computer that processes instructions and procedures. You have the option of selecting a nearby computer or a far-off server. You can add, modify, or remove remote servers from the list. For distant servers, an ID and password are frequently required, and occasionally a domain name as well.
A network access server is any device that controls remote logins to establish a point-to-point protocol connection (NAS). Some people call these devices media access gateways or remote access servers.
Regardless of the name you give them, these programs handle authentication and guarantee that users may access the resources they need. They can be used to link consumers to a phone system or the internet.
when using ssl authentication, what does the client verify first when checking a server's identity? answer the current date and time must fall within the server's certificate-validity period. all dns resolution must point to the corporate intranet routers. master secrets are verifiable from asymmetric keys. the certificate must be non-expiring and self-signed by the sysadmin.
When using SSL authentication, the client checks whether the current date and time are falling within the server's certificate validity period or not, before checking a server's identity.
Explain SSL authentication.
Secure Sockets Layer, or SSL authentication, is a mechanism for establishing a secure connection for user-server interactions. SSL is a PKI protocol since a server and a user are both involved in every web interaction, an SSL certificate assures that nobody can intercept, read, or alter the dialogue between the client and the server since users frequently enter or have sensitive, personal information on websites that make people and systems susceptible.
To learn more about SSL authentication, use the link given
https://brainly.com/question/10450768
#SPJ4
in the field of technology, an algorithm could be defined as . a set of styles that can be referenced by a web application through html a mathematical formula used to write markup language logic an api used by web applications to retrieve data a set of common instructions that can be used with different input values to extrapolate information
An algorithm is described as a group of standard instructions that may be applied to information extrapolation using various input values.
What is an algorithm?An algorithm is an approach used to carry out a computation or solve a problem. In either hardware-based or software-based routines, algorithms function as a detailed sequence of instructions that carry out predetermined operations sequentially.An algorithm is indeed a codified formula that is included within software that, when activated, directs the tech to take the proper action to address a challenge. Input and output are how computer algorithms operate. A system analyses the data entered and issues the appropriate orders to bring about the intended outcome.Quicksort. One of the most popular sorting algorithms is quicksort since it is also among the most effective. The first step is to choose a pivot number. This number will divide the data, with smaller numbers to its left and larger numbers to its right.To learn more about algorithm refer to :
https://brainly.com/question/24953880
#SPJ4
Answer: D. A set of common instructions that can be used with different input values to extrapolate information
Roland knew that the code to his sister toy safe was only two digits ong he was able to crack the safe open by attempting every two digit code until he found the correct one what method code breaking did Roland use
Answer:
Brute-force attack
Explanation:
a brute force attack is when you use a bunch of random passwords in the hopes of eventually getting it right
Answer:
Permutation cipher
This is a complete enumeration of all possible keys of small length (we have a length of 2).
The first digit is 1, 2, 3, ..., 8, 9.
Second digit 0, 1, 2,…, 8, 9
Number of options: 9*10 = 90
10, 11, 12, … 97, 98, 99
if you were projecting a raster containing land use code values, the best resampling method to use would be
The best resampling method to employ when projecting a raster of land use codes is nearest neighbor, bilinear, cubic convolution, affine.
What is raster resampling?Raster resampling is the process of altering the spatial resolution of a raster dataset (raising or reducing). The uncorrected image's original digital pixel values are used to calculate the new pixel values throughout the resampling process.The bicubic resampling technique is typically regarded as the finest choice for obtaining highly effective outcomes. However, bilinear or nearest neighbor may be preferable choices if speed is more crucial than quality. The jackknife and bootstrap resampling techniques are two of the most used. These two are illustrations of nonparametric statistical techniques. In statistical inference, the Jackknife method is used to calculate the bias and standard error of a test statistic.To learn more about resampling refer to:
https://brainly.com/question/25006407
#SPJ4
a data analyst uses the aes() function to define the connection between their data and the plots in their visualization. what argument is used to refer to matching up a specific variable in your data set with a specific aesthetic?
You can build your own affinity audience with Custom Affinity Audiences, which are particularly designed by interest keywords, URLs, and apps that you enter.
In other words, its inputs are stated to be assessed in light of the data. Because you may name those variables directly, working with variables from the data frame is made simple. A plotting software called ggplot2 offers helpful functions for generating intricate graphs from data in a data frame. It offers a more programmatic interface for choosing which variables to plot, how to present them, and other visual characteristics. In other words, its inputs are stated to be assessed in light of the data.
Learn more about variables here-
https://brainly.com/question/13111084
#SPJ4
4. Which of the following is NOT a common file type for a text document?
O xlsx
O docx
Opdf
Oodt
Answer:
xlsx
Explanation:
pdf, is a document file, so is docx and odt. which leaves the remaining file, xlsx.
8. given the ip address of a host: 180.199.199.79, and its subnet mask 255.255.255.240 compute the subnet address in the decimal dotted format, and the broadcast address.
the ip address of a host: 180.199.199.79, and its subnet mask 255.255.255.240. The decimal dotted format is 180.199.156.7 and the broadcast address is 180.199.199.79.
What is the broadcast address?
A network address used to send data to every device connected to a multiple-access communications network is called a broadcast address. All hosts that are connected to the network may receive a message sent to a broadcast address.
All hosts on the local subnet can receive data sent to the broadcast address. Many protocols, including ARP, the Routing Information Protocol (RIP), and others that must transmit data before they know the local subnet mask, use the broadcast address.
To learn more about broadcast address, use the link given
https://brainly.com/question/29370842
#SPJ1
What are two possible challenges of online collaboration?
A. Outside noises like lawn mowers or sirens might be heard by
other team members.
B. Team members never get along while collaborating on a project.
C. Online collaboration that relies heavily on inputting text to
communicate can be challenging for those who have limited
keyboard skills.
D. Team members that are uncomfortable with online tools may feel
excluded.
The two possible challenges of online collaboration are:
c)Online collaboration that relies heavily on inputting text to
communicate can be challenging for those who have limited
keyboard skills.
d)Team members that are uncomfortable with online tools may feel
excluded.
What are the possible challenges due to online collaboration?
creating seamless communication is challenging.the vision that is blurry.The requirement to advance diversityfosters a culture of trust among team members.productivity issues.an employee with a negative mentality.destroying organizational silos.Lack of compliance and employee reluctance.Hence along with the above challenges, the ones that are noted as answers are considered more challenging
To learn more about online collaboration
https://brainly.com/question/28289861
#SPJ1
in which of the following cases should you consider storing functions in a module file? group of answer choices a and b only when the functions use reference parameters. when the functions will be used by multiple programs. all of the above when it helps divide a long source code file into smaller files that are easier to manage.
Option and b are correct :
When it helps divide a long source code file into smaller files that are easier to manage and when the functions will be used by multiple programs .
What is source code?
The text file is referred to as containing the source code when a programmer enters a series of C programming language commands into Windows Notepad and saves the sequence as a text file, for instance. The "before" and "after" versions of a built computer program are commonly referred to as source code and object code.
What is functions?
Simply put, a function is a "chunk" of code that you can reuse repeatedly rather than having to write it out several times. Programmers can divide a problem into smaller, each performing a specific task, chunks using functions.
It is always advantageous to use a header file to declare all the functions and define them in a separate file if the program is very large and consists of more than four files.
Header files make it unnecessary to declare or define functions in each file, making it possible to manage huge code that has 3-5 class files. You can do it by merely including the function header file.
Therefore, only options a and b will be the correct selection.
Learn more about functions click here:
https://brainly.com/question/25741060
#SPJ4
Carla is creating a presentation that will include tables, lists, and charts. What will help her present these different types of content appropriately?
Answer:
An Excel spreadsheet will help her
Question 5 of 10
How does a programmer instruct a video game on how to function?
A. By choosing parameters in a creative manner
B. By using phrases that can be interpreted in several different way=
C. By writing an algorithm using a computer language
OD. By creating a range of variables within the game
SUBMIT
Answer:
either C or D
Explanation:
From a logical and practical view, computer and technology is about code
you need to design an ipv6 addressing scheme for your network. the following are key requirements for your design: infrastructure hosts, such as routers and servers, are assigned static interface ids. however, workstations, notebooks, tablets, and phones are assigned interface ids dynamically. internet access must be available to all hosts through an isp. site-to-site wan connections are created using leased lines. which type of ipv6 addressing is most appropriate for hosts on this network?
Global Unicast Addressing type of ipv6 addressing is most appropriate for hosts on this network.
What is IP address?
An IP address is made up of two parts: the network ID, which is made up of the first three numbers, and the host ID, which is the fourth number. The network ID on your home network, for example 192.168.1.1, is 192.168.1, and the host ID is the number after that.
What is ipv6 addressing?
An endpoint device in an IPv6 network is identified by an IPv6 address, which is a 128-bit alphanumeric value. The IPv6 addressing infrastructure replaces the IPv4 addressing infrastructure, which had constraints that IPv6 was created to address.
1. Global routing prefix: The part of the address that is given to a customer or site by the provider, such as an ISP, is known as the global routing prefix. A specific autonomous system is given a Global routing prefix, which is made up of the most important 48 bits.
2. Subnet ID: The subnet ID is the number that comes after the interface ID and before the global routing prefix.
3. Interface ID: A 64-bit ID is created by using /64 subnets, which is strongly advised in most situations. The Interface ID is equal to the host portion of an IPv4 address.
Learn more about IPV6 address click here:
https://brainly.com/question/15048370
#SPJ4
to achieve a lan capacity of 10 gbps over utp, cat 5e is used, combined with m-ary modulation techniques and the use of hybrid canceller transceivers. true false
To achieve a lan capacity of 10 gbps over utp, cat 5e is used, combined with m-ary modulation techniques and the use of hybrid canceller transceivers , the statement is true
What is lan capacity?
Twisted pair cables can be as long as 100 m (328 ft), although the maximum length of a fiber optic cable can be anywhere between 10 km and 70 km, depending on the type of fiber used.
Today, data rates can vary from 100 Mbit/s to 10,000 Mbit/s depending on the twisted pair or fiber optic cable type being used.
A CAT-5 cable may only be up to 100 meters in length, according to the Cat-5 Ethernet specification.
A local area network (LAN) is made up of several computers that are connected to one another to create a network in a certain area. LANs use TCP/IP ethernet or Wi-Fi to connect the computers to one another.
To learn more about lan capacity refer to:
https://brainly.com/question/14242759
#SPJ4
suppose your company has built a database application that runs on a centralized database, but even with a high-end computer and appropriate indices created on the data, the system is not able to handle the transaction load, leading to slow processing of queries. what would be some of your options to allow the application to handle the transaction load?
Multiple database updates are managed through transactions within a single application as a single unit of work.
What is the application to handle the transaction load?In a DBMS, a transaction is a logical processing unit that includes one or more database access operations. A transaction is a computer unit whose execution might or might not alter a database's contents.
In other words, if you have an application that manages data in one or more databases, you can make sure that all updates are committed simultaneously across all databases if they are handled as part of a transaction.
Therefore, Concurrent access should be managed to prevent problems like hardware failure and system failures.
Learn more about transaction here:
https://brainly.com/question/24215121
#SPJ1
Design a pseudo program that asks the user for two numbers and then sends these two numbers as arguments to four arithmetic functions: addition multiplication division and modulus the remainder after dividing one number by the other
function add(a, b){ //This is an addition function
return a+b;
}
function mod(a, b){ //This is a module function
return a%b;
}
function mul(a, b){ //This is the multiplication function
return a*b;
}
function div(a, b){ //This is a division function
return a/b;
}
var a=prompt("Enter a number");
var a1=parseInt(a); //Convert string input to Integer
var b=prompt("Enter a number");
var b1=parseInt(b); //Convert string input to Integer
var add=add(a1,b1); //Call the addition function
var multiplication=mul(a1,b1); //Calling the multiplication function
var division=div(a1,b1); //Calling the split function
var module=mod(a1,b1); //Call function modulus
document.write("Addition = " + addition + "<br>");
document.write("Multiplication = " + multiplication + "<br>");
document.write("Division = " + division + "<br>");
document.write("Module = " + module + "<br>");
You can learn more through link below:
https://brainly.com/question/23631339#SPJ4
joaquin is a senior network technician for a mid-sized company who has been assigned the task of improving security for the it infrastructure. he has been given a limited budget and must increase security without redesigning the network or replacing all internetworking security devices. he focuses on an approach that will identify a single vulnerability. what does he recommend?
Weakest Link is the correct answer. The flaw that hackers would exploit is the weakest link in the cyber chain, where many business processes require manual, human input, and exploit the link, which would remain a fertile field for any of the hackers.
What is weakest link in network?
For far too many networks, the weakest link in security is the user, not the technology.
Let me provide an example. A major financial services firm with extensive network security disclosed in March 2006 that one of its portable computers had been stolen. The laptop contained nearly 200,000 people's Social Security numbers. What caused it to happen? An employee of the firm had locked the laptop in the trunk of an SUV while dining with colleagues in a restaurant. During dinner, one of the employee's coworkers took something from the vehicle and forgot to re-lock it. As fate would have it, a rash of car thefts occurred in that specific area at that specific time, and the rest is history.
The moral of the story is simple: no matter how secure your network is, it is only as strong as its weakest link. And people, specifically you and your employees, are frequently the weakest link. It is critical to understand that inadequate security puts your company and its partners at risk. As a result, many businesses and organizations, such as credit card companies, now specify and require minimum levels of security before doing business with them.
To know more about the weakest link in a network, visit: https://brainly.com/question/20912255
#SPJ1
which data over cable service interface specification (docsis) layer is used by the cable modem termination system (cmts) to differentiate between cable modems? ncti
The DOCSIS Media Access Control (MAC) Layer used by the cable modem termination system (CMTS) to differentiate between cable modems.
This part of the DOCSIS protocol stack controls all data that is present on the upstream. Since every communication device in an HFC plant uses the same cable, much like an Ethernet network, it is crucial that a systematic procedure exists so that the CMTS can instruct the cable modem when and how long to transmit data.
Coordination of upstream traffic from the cable modem to the CMTS takes place at the MAC layer.
Each of the different protocols used in the DOCSIS standard serves a particular purpose. Every cable modem operates on the basis of these protocols.
The foundation of communication between any cable modem (CM) and the cable modem termination system is laid by the lower four layers, which are specific to the cable data network (HFC plant and CMTS).
The lower layers establish the communication path, and the upper layers carry out protocols over that path. All well-known IP services are delivered as Transmission Control Protocol/Internet Protocol (TCP/IP) traffic, including e-mail, the Web, file transfers, and network news.
To learn more about Cable Modem Termination System (CMTS) click here:
brainly.com/question/17990873
#SPJ4
3.2 Code Practice Question 3 please
Below is the code in C language to test the correct password with a numerical value as the secret phrase.
#include <stdio.h>
int main() {
int pass, x=10;
while (x!=0)
{
printf("\nEnter the password: ");
scanf("%d",&pass);
if (pass==1234)
{
printf("Correct password");
x=0;
}
else
{
printf("Not correct");
}
printf("\n");
}
return 0;
}
Since you didn't mention which programming language we have to use for the given problem, Hence, I gave you a sample code. Modify the code to take input as a string in your preferred programming language to solve the given problem.
To know more about C Programming code, visit: https://brainly.com/question/15683939
#SPJ13
a network has been crashed to the point where all activities are critical. additional crashing: group of answer choices is unnecessary. may require crashing multiple tasks simultaneously. can be done, but all critical tasks must be reduced in duration. is prohibitively expensive. is impossible.
Option D is correct. Project managers and stakeholders often use the project management technique of "crashing" to deal with emerging problems.
By allocating more resources where they are most needed, project crashing maintains or accelerates a project's scope and timeline. Crashing is a compression approach that focuses on the project timetable to hasten the project's completion date. Here are some plausible instances of crashing: Over-time. adding more resources to a particular activity. Crashing is the process of reducing the length of time it takes to complete a project by changing its scope or adding resources. Fast-tracking, which involves adjusting project activities so that they are completed in parallel and with less time spent, is typically the first option when a project's production duration needs to be shortened.
Learn more about crashing here-
https://brainly.com/question/4701800
#SPJ4
electronic retailers can collect transaction data for their data warehouse, but they can also collect information by placing cookies on a visitor's hard drive. cookies are:
Cookies are tiny text files kept in a web user's browser directory or data folder. They are sometimes referred to as browser cookies or HTTP cookies.
Cookies are very little text files that are saved in the data folder or browser directory of a web user. They are sometimes referred to as browser cookies or HTTP cookies. To remember login information and keep track of consumers, e-commerce websites put cookies on visitors' browsers.
When a person visits an e-commerce website for the first time, a cookie is put in their browser, and the website logs their activity on a distant server. The cookie is one short line of text. It contains no information about the user or their computer. Instead, it typically contains the URL of the website, a number that is created at random, and the cookie's expiration date.
To know more about website click here:
https://brainly.com/question/28644651
#SPJ4
modern computer systems enable users to work with more than one program at the same time. this technique is known as
The modern computer systems enable users to work with more than one program at the same time. This technique is known as Multitasking or Multiprogramming .
What is mean by Multitasking?Computer multitasking is the practice of running many tasks concurrently for a predetermined period of time. New tasks can start and stop old ones before they are finished, as opposed to waiting for them to finish. Multitasking is often referred to as multiprocessing.A user can manage numerous computer tasks simultaneously using an operating system's multitasking feature, such as by running application software. When switching between these jobs without losing data, the operating system can keep track of where you are in each of them.Multitasking is the ability to manage several responsibilities at once while focusing on one task and keeping an eye on others.To learn more about multitasking refer to:
brainly.com/question/12977989
#SPJ4
what is a possible situation when it might be necessary to boot windows 7 from a usb device, a cd, or a dvd?
Necessary to boot windows 7 from a usb device, a cd, or a dvd to repair the system
How do I make a bootable Windows 7 DVD from USB?A Windows 7 ISO file on a DVD or USB flash device.Download the ISO file, and then launch the Windows 7 USB/DVD Download program to turn it into a bootable DVD or USB flash drive.After completing this, you can install Windows 7 directly from a DVD or USB flash drive. To generate a bootable CD or USB, launch Windows Boot Genius, insert a blank media into the functional computer, and select "Burn."To start your PC from the bootable CD or USB you just produced, insert it into the problematic machine. Making use of the Windows 7 USB/DVD Download ToolClick Browse in the Source File area to locate the Windows 7 ISO image on your computer and load it.Choose Next.Identify a USB device.From the drop-down option, pick the USB flash driveClick Copying to start.When the procedure is finished, close the application. You can burn the Windows 7 download to disc or make a bootable USB drive using the free Windows USB/DVD download tool from Microsoft.To learn more about boot Windows 7 refer
https://brainly.com/question/29220833
#SPJ4
Necessary to boot windows 7 from a usb device, a cd, or a dvd to repair the system.
How do I make a bootable Windows 7 DVD from USB?A USB flash drive or DVD with the Windows 7 ISO file. To create a bootable DVD or USB flash drive, download the ISO file, then run the Windows 7 USB/DVD Download program.You can then install Windows 7 straight away from a DVD or USB flash drive after finishing this. Launch Windows Boot Genius, place a blank piece of media into a working computer, and choose "Burn" to create a bootable CD or USB.Put the bootable CD or USB you just created into the faulty machine to start your PC from it. The Windows 7 USB/DVD Download Tool is usedTo locate and load the Windows 7 ISO image from your computer, click Browse in the Source File area.Select Next.Find a USB gadget.To learn more about boot Windows 7 refer:
brainly.com/question/29220833
#SPJ4
Cubism was a 20th century art movement founded by two artists: pablo picasso and blank space__________. choose the answer. question 13 options: alphonse mucha windsor mccay franz marc georges braque
Cubism was a 20th century art movement founded by two artists: pablo picasso and Georges Braque.
What is Cubism art movement?
Cubism arose in the aftermath of Pablo Picasso's shocking 1907 Les Demoiselles d'Avignon, during a period of rapid experimentation by Picasso and Georges Braque.
These artists used multiple vantage points to fracture images into geometric forms, drawing on Paul Cezanne's emphasis on the underlying architecture of form. Figures were depicted as dynamic arrangements of volumes and planes where background and foreground merged, rather than as modelled forms in an illusionistic space.
The movement was one of the most innovative of the early twentieth century, challenging Renaissance depictions of space and leading almost directly to experiments with non-representation by a variety of artists. Cubist artists went on to experiment with sculpture and incorporate elements of collage and popular culture into their paintings.
To learn more about Architecture, visit: https://brainly.com/question/20568202
#SPJ1
oracle database is an example of the . a. hierarchical model b. file system data model c. relational database d. xml/hybrid data model.mcq answer
Option a is correct. The oracle database is an example of the a hierarchical model.
A group of data that is handled as a whole is called an Oracle database. A database's main function is to store and retrieve relevant data. The solution to information management's challenges is a database server. In a multiuser scenario, a server often manages a lot of data reliably so that multiple users can access the same material at once. Delivering excellent performance while accomplishing all of this. A database server also offers effective solutions for failure recovery and prevents illegal access.
The first database created for enterprise grid computing, the most adaptable and economical method of managing data and applications, is Oracle Database. Large pools of industry-standard, modular storage and servers are produced by enterprise grid computing.
To know more about Oracle database click here:
https://brainly.com/question/14256914
#SPJ4
two's complement allows us to reuse an adder circuit for subtraction. this saves (answer)
Answer:
I don't know I only want points
What is the correct way to write an argument? =A1 > 4= [A1 > 4] “A1 > 4” (A1 > 4)
The correct way to write an argument is [A1 > 4]
What is meant by argument?You can provide a function more information by using an argument. The data can then be used by the function as a variable as it executes. To put it another way, when you construct a function, you have the option of passing data as an argument, also known as a parameter.
A value that is passed between programmes, functions, or subroutines in programming. Arguments are autonomous objects, or variables, that include information or codes. It is customary to refer to an argument as a "parameter" when it is used to modify a programme for a user. view argc
Astronomy, which historically used tables to determine the spatial positions of planets from their positions in the sky, is where the term "argument" in this sense originated.
To learn more about parameter refer to:
https://brainly.com/question/29223118
#SPJ9