Answer:
hi
Explanation:
1 east
2 the flower bud for cotton and for jute the leaves
plz mark me as a BRAINLIST
8.310x10^2 – 7.210x10^1
[?]x10^[?]
Answer:
[tex]7.589\times 10^{2}[/tex]
Explanation:
The expression can be solved mathematically as follows:
1) [tex]8.310\times 10^{2}-7.210\times 10^{1}[/tex] Given
2) [tex]8.310\times 10^{1+1} - 7.210\times 10^{1}[/tex] Definition of sum
3) [tex](8.310\times 10^{1})\times 10^{1}-7.210\times 10^{1}[/tex] [tex]a^{m+n} = a^{m}\cdot a^{n}[/tex]/Associative property
4) [tex](8.310\times 10^{1}-7.210)\times 10^{1}[/tex] Distributive property
5) [tex](83.100-7.210)\times 10^{1}[/tex] Multiplication
6) [tex]75.89\times 10^{1}[/tex] Subtraction.
7) [tex](7.589\times 10^{1})\times 10^{1}[/tex] Multiplication/Associative property
8) [tex]7.589\times (10^{1}\times 10^{1})[/tex] Associative property
9) [tex]7.589\times 10^{2}[/tex] [tex]a^{m+n} = a^{m}\cdot a^{n}[/tex]/Result
A 0.477 mol sample of O_2 gas has a volume of 11.3 L at a certain temperature and pressure. If all this O_2 were converted to ozone (O_3) at the same temperature and pressure, what is the ozone volume (in liters)? 3 O_2(g) → 2 O_3(g)
Answer:
The volume of ozone produced is 7.53 L.
Explanation:
The reaction is:
3O₂(g) → 2O₃(g) (1)
0.477 mol V=?
11.3 L
From the reaction (1) we have that 3 moles of O₂ produce 2 moles of O₃ so the volume of the ozone produced can be calculated as follows:
[tex] V_{O_{3}} = V_{O_{2}}*\frac{n_{O_{3}}}{n_{O_{2}}} = 11.3 L*\frac{2}{3} = 7.53 L [/tex]
Therefore, the volume of ozone produced is 7.53 L.
I hope it helps you!
The ozone volume (in liters) is 7.53 L.
The calculation is as follows:
The volume of the ozone in liters should be
[tex]= 11.3 \times 2\div 3[/tex]
= 7.53L
we have that 3 moles of O₂ produce 2 moles of O₃
Learn more: https://brainly.com/question/17961582?referrer=searchResults
Balance the following equations
ANSWER
2Ba + 2HBr → 2BaBr + H2
2BiCl3 + 3H2S → Bi2S3 + 6HCl
Br2 + 2KI → I2 + 2KBr
4Fe + 3O2 → 2Fe2O3
I HOPE THIS WILL HELP YOU IF NOT THEN SORRY HAVE A GREAT DAY:)Answer:
[tex]3Mg _{(s)} + N _{2(g)} → Mg_{3} N _{2(s)}[/tex]
[tex]Ba _{(s)} + 2HBr_{(g)} → BaBr _{2(s)} + H _{2(g)}[/tex]
[tex]2BiCl_{3(s)} + 3H_{2} S _{(g)} → Bi _{2} S _{ 3(g)} + 6HCl _{(g)} \\ [/tex]
[tex]Br_{2(g)} + 2KI _{(g)} → I _{2(g)} +2 KBr _{(g)}[/tex]
[tex]4Fe_{(s)}+ 3O_{2(g)} → 2Fe_{2} O _{3(s)} [/tex]
an atom Y has atomic number 13. It loses three electrons in order to be stable.
i.) What is the proton number and electron number of the atom
a)before it loses electrons
b) after losing electrons
ii.) name the tyoe of ion formed by the atom when it loses three electrons
Show by illustration
An atom Y has atomic number 13, so the no. of electrons and protons in it is 13 and after loses it will form cation and no. of electrons will become 10.
What is atomic number?Atomic number of an atom is equal to the number of electrons or protons present in that atom.
Before loses electronsNumber of protons and electrons in the atom before loses electron is 13, as given atomic number is 13.
After loses 3 electronsNumber of elctrons in the atom is 10 and number of protons is 13, as protons are present in the nucleus.
Name of the ion which is formed by the atom is cation as it bears positive charge on it.So, number of protons is always same i.e. 13 within the atom and no. of electrons after losing 3 electrons is 10.
To know more about atomic number, visit the below link:
https://brainly.com/question/1805828
A mineral sample has a mass of 35 g. When it is dropped into a graduated cylinder with 25mL of water, the volume of the water rises to 35 mL. Using this data, determine the density of the sample.
Answer:
3.5g/ml
Explanation:
density=mass/volume
the mass of the mineral we have been given to be 35g
and it's volume is found by subtracting the initial volume from the final volume which is 35ml-25ml=10ml
Answer:
[tex]\boxed {\boxed {\sf 3.5 \ g/mL}}[/tex]
Explanation:
The density of an object is the mass per unit volume, so the formula is:
[tex]\rho= \frac {m}{v}[/tex]
We know the mass of the mineral sample is 35 grams.
We have to calculate the volume. The volume was found using water displacement. An amount of water was put in a graduated cylinder, then the object was dropped in. The volume is the difference between the final water level and the initial water level.
v= final water - initial water v= 35 mL - 25 mL v= 10 mLNow we know the mass and volume of the mineral sample.
m= 35 g v= 10 mLSubstitute the values into the formula.
[tex]\rho= \frac{35 \ g}{10 \ mL}[/tex]
Divide.
[tex]\rho = 3.5 \ g/mL[/tex]
The density of the mineral sample is 3.5 grams per milliliter.
What is an alkyne?
A. A hydrocarbon containing all single bonds
B. A hydrocarbon containing a carbon-carbon double bond
C. A hydrocarbon containing a carbon-carbon triple bond
D. A hydrocarbon containing an aromatic ring
Alkynes are called the hydrocarbons. Ethyne is an important alkyne which is used in oxyacetylene gas cutting. A hydrocarbon containing a carbon-carbon triple bond is the alkyne. The correct option is C.
What is an alkyne?In organic chemistry, an alkyne is defined as the unsaturated hydrocarbon containing at least one carbon-carbon triple bond. The alkynes are unsaturated hydrocarbons and their general formula is CₙH₂ₙ₋₂ and the triple bond is known as the acetylene bond.
Many alkynes are found in nature. Ethyne is the first member of the alkyne family in which two carbon atoms are connected by a triple bond. Almost all alkynes are also found to be hydrophobic in nature.
Alkynes show three types of isomerism like chain isomerism, position isomerism and functional isomerism. The triple bond present in the alkynes is its functional group.
Thus the correct option is C.
To know more about Alkynes, visit;
https://brainly.com/question/23508203
#SPJ7
take an onion and one jam bottle insert the roots of onion in the jam bottle for five days . after five days observe the growth in the roots of onion which is submerged in jam bottle. write observation here
Answer:
It is noticed that after five days, there is elongation of the root cells in the roots of onion in the jam bottle
Explanation:
It is noticed that after five days, there is elongation of the root cells in the roots of onion in the jam bottle. The growth of a plant is due to the availability of the growing and dividing cells in the meristematic regions of the apical meristems. (stem cells). This site are active site for elongation and differentiation of the stem tissues. In the apical meristem of the root cells, the cells have the potential to carry out mitosis and cell division repeatedly in order to generate newer cells for extension and development of stems and leaves. With each cell division, one cell remains in the meristem which the other increases in size and differentiate due to different genomic expression to form the meristem regions which eventually becomes the stem structure.
what is cytoplasm ? what does it contain?
Answer:
Cytoplasm is a thick solution that fills each cell and is enclosed by the cell membrane. It is mainly composed of water, salts, and proteins. All of the organelles in eukaryotic cells, such as the nucleus, endoplasmic reticulum, and mitochondria, are located in the cytoplasm.
Answer:
Explanation:
Cytoplasm is a thick solution that fills each cell and is enclosed by the cell membrane. It is mainly composed of water, salts, and proteins. All of the organelles in eukaryotic cells, such as the nucleus, endoplasmic reticulum, and mitochondria, are located in the cytoplasm. ...
Using complete sentences, explain how to predict the products and balance the reaction between sulfuric acid and potassium hydroxide. H2SO4 + KOH ⟶
Answer:
The answer to your question is given below.
Explanation:
The reaction of sulfuric acid and potassium hydroxide is called neutralisation.
Neutralisation is a reaction involving an acid and a base which produces salt and water only.
For the react between sulfuric acid, H2SO4 and potassium hydroxide, KOH, we can predict the products obtained as follow:
H2SO4 + KOH —>
In solution, H2SO4 and KOH will dissociate as follow:
H2SO4(aq) —> 2H^+(aq) + SO4^2-(aq)
KOH(aq) —> K^+(aq) + OH^-(aq)
H2SO4 + KOH —>
2H^+(aq) + SO4^2-(aq) + K^+(aq) + OH^-(aq) —> K^+(aq) + SO4^2-(aq) + 2H^+(aq) + OH^-
H2SO4 + KOH —> K2SO4 + H2O
Now, we can balance the above equation as follow:
H2SO4 + KOH —> K2SO4 + H2O
There are 2 atoms K on right side and 1 atom on the left side. It can be balance by writing 2 in front of ko as shown below:
H2SO4 + 2KOH —> K2SO4 + H2O
There are 2 atoms of H on the right side and a total of 4 atoms on the left side. It can be balance by writing 2 in front of H2O as shown below:
H2SO4 + 2KOH —> K2SO4 + 2H2O
Now,the equation is balanced.
Answer:
Given the reactants, H2SO4 and KOH, we are asked to determine the product(s) of the reaction. Since H2SO4 is an acid and KOH is a base. This is a neutralization reaction, thus, the products are salt and water.
So, H+ from H2SO4 will react with OH- from KOH forming H2O. K+ will also react with SO4 2- forming K2SO4. Therefore, the balanced reaction will be:
H2SO4 + 2KOH ---> K2SO4 + 2H2O
Explanation:
All carbon ato ms have atomic number 6 but some have mass number 12 and others have mass number 14.what is a) the same b) different about the structure of these two types of carbon atoms
Answer:
a) The similarities in their structure are;
1) The two isotopes have the same number of protons in their nucleus
2) The two isotopes have the same number of electrons in their orbit
3)The basic chemical properties of the two isotopes are the same
b) The differences in their structure are;
1) The number of neutrons in their nucleus are different
6 for carbon 12 and 8 for carbon 14
2) The structure of carbon 12 is stable while the structure of carbon 14 disintegrates
3) The isotopes have different densities, therefore, different packing
Explanation:
The atomic number is the number of protons in the nucleus of an atom
The mass number is the sum or total number of protons and neutrons in an atom
Given that the atomic number of all carbon atoms = 6
The number of protons in all carbon atoms = 6
Given that some of the carbon atoms have a mass number of 12 while others have a mass number 14, we have
Therefore, the number of neutrons in some of the carbon atoms = 12 - 6 = 6
The number of neutrons in the remaining of carbon atoms = 14 - 6 = 8
Therefore the carbon atom has two isotopes including ¹²₆C and ¹⁴₆C.
All plants bear flower (true or false)
Answer: Your answer is false.
Explanation
Most of the world's plants are flowering plants called angiosperms (from the Greek words for “vessel” and “seed”), there are hundreds of plants that do not make flowers.
Hope this helps ya! Have a great day! ^-^
fill in the blanks with the words given below-
[Atoms, homogeneous, metals, true, saturated, homogeneous, colloidal, compounds, lustrous]
1.An element which are sonorous are called................
2.An element is made up of only one kind of ....................
3.Alloys are ............................. mixtures.
4.Elements chemically combines in fixed proportion to form ........................
5. Metals are................................... and can be polished.
6. a solution in which no more solute can be dissolved is called a .................... solution.
7. Milk is a .............. solution but vinegar is a .................. solution.
8. A solution is a ................... mixture.
pls help, could not get these answers
Answer:
1. Metal.
2. Atom.
3. Homogeneous
4. Compounds.
5. Lustrous
6. Saturated.
7. Colloidal; true.
8. Homogeneous.
Explanation:
1. An element which are sonorous are called metal.
2. An element is made up of only one kind of atom.
3. Alloys are homogeneous mixtures.
4. Elements chemically combines in fixed proportion to form compounds.
5. Metals are lustrous and can be polished.
6. A solution in which no more solute can be dissolved is called a saturated solution.
7. Milk is a colloidal solution but vinegar is a true solution.
8. A solution is a homogeneous mixture.
A two digit number is such that the sum of the ones and the tens digits is tens.If the digits are reversed,the new number formed exceeds the originals numbers by 54.Find the number.
Answer:
Explanation:
Let the no in the ones place be x
And the no in the tens place be 10 - x
Original no = 10 ( 10 - x ) + x
= 100 - 10x + x
= 100 - 9x
Reversed no = 10 - x + 10 ( x )
= 10 - x + 10 x
10 + 9x
According to the question,
the new number formed exceeds the originals numbers by 54.
10 + 9x = 100 - 9x + 54
10 + 9x = 154 - 9x
By transposing,
9x + 9x = 154 - 10
18 x = 144
x = 144 / 18
x = 8
∴ Digit in ones place = x = 8
Digit in tens place = 10 - x = 10 - 8 = 2
So the number = 28
( You can also recheck it by adding the ones and tens digit
8 + 2 = 10
In the question, the sum of ones and tens digit in ten )
Hope this helps
plz mark as brainliest!!!!!!!
CO2(g) + H2(g)
cog) + H2O(1)
What is being oxidized?
carbon
O carbon dioxide
oxygen
hydrogen
Answer:
Hydrogen
Explanation:
This may be wrong but I can't really tell because of how you have written the question
Answer: The answer is D. Hydrogen
Explanation:
I took the test
what do you mean by Arsenic Pollution?
Arsenic contamination of groundwater is a form of groundwater pollution which is often due to naturally occurring high concentrations of arsenic in deeper levels of groundwater.Arsenic contamination of ground water is found in many countries throughout the world, including the US.
In the image above the ruler is measuring in centimeters. The blue cylinder falls somewhere between 2.7cm and 2.8cm according to the ruler. Since we can estimate the last digit I would say that the length of the cylinder is 2.76cm. Since I am estimating any number 2.72cm or 2.78cm could also be correct.
Why would 2.755 not be a correct measurement according to estimating the last digit?
Answer:
The answer is below
Explanation:
Resolution is the smallest unit of measurement that can be measured by a measuring instrument. Each point on the ruler is 0.1 cm and the difference between any two points, about 0.01 cm cam be measured. The minimum measurement (resolution) that can be measured by the ruler is 0.01 cm (two decimals), therefore it cannot measure up to three decimal places such as numbers like 2.755.
which type of model best represents simple molecules?
> ribbon
> wire
> Lewis dot
> structural formula
Answer:
Lewis dot
Explanation:
It's a very simplified representation of the valence shell electrons in a molecule.
The correct answer is Lewis dot.
A Lewis dot structure of a molecule is a structure in which the valence electrons of the molecule are represented using dots.
It is usual to seek a simple representation for simple molecules that explains in part, the properties of the molecule.
Such a representation must show the valence electrons in the molecule. A simple representation that can do this is the Lewis dot structure of molecules. The Lewis dot structure of NO2 molecule is shown in the image attached to this answer.
It was introduced by G.N Lewis and can be successfully used to represent many simple chemical molecules.
https://brainly.com/question/4144781
It id desired to increase thr volume of gas by 20% without changing the pressure .To what temperature the gas must be heated if the initial temperature of the gas is 27degree celcius?
Answer:
32.4°C
Explanation:
Consider the following expression:
P•V/T =P'•V'/T'
Where P and P' are respectively the initial and the final pressure, V and V's are respectively initial and final volume, and T and T' are respectively initial and final temperature.
We know that the pressure cannot change, so it means that P = P'
We also know that the volume must be increased in 20%, and if we multiply the volume by 1.2 is like increase it in 20%, so we can write that V' = 1.2•V, and changing a little more we can write that V'/V = 1.2
So let's do some maths:
P•V/T = P'•V'/T'
T'•P•V/T = P'•V'
T'•P•V = P'•V'•T
T'=P'•V'•T/P•V
We know that P'=P so the division is equal to 1:
T'= 1•V'•T/V
We also know that V'/V = 1.2, so:
T' = 1.2•T
And we know the value of T, it's 27, so now we just have to solve it:
T' = 1.2•27
T' = 32.4°C
One the first chemistry test. 12 students got As, 18 students got Bs, and 20 students got Cs.
a. What is the percentage of students received Bs.
b. What is the percentage of students who received Cs?
Express your answer to the ones place.
Answer:
A. 36 percent recieved Bs
B. 40 percent of students received Cs
Explanation:
Amount of students: 12+18+20=50
Students with Bs: (18÷50) x 100 = 36%
Students with C's: (20÷50) x100 = 40%
On the first chemistry test 12 students got A, 18 students got B, and 20 student got C. Thus the percentage of students received B is 0.36 and percentage of students received c is 0.40
What is the percentage of students received B and C?In mathematics, a number or ratio expressed as a fraction of 100. It is often denoted using the percent sign %. A percentage is a dimension less unit and it has no unit.
In above question 12 student got A, 18 student got B, and 20 student got C.
So total number of student = 12 + 18 + 20 = 50.
Then the percentage of students received B is as follows:-
Percentage of students who got B = (student who got B/Total number of student) X 100.
=(18/50) X 100
= 36%
Now percentage of students who got C = (No of students who got C/Total students)X100
=(20/50) X 100
=40%.
Therefore,On the first chemistry test 12 students got A, 18 students got B, and 20 student got C. Thus the percentage of students received B is 0.36 and percentage of students received c is 0.40 percentage of students who got B is 36% and percentage of students who got C is 40%
Learn more about percentage here:
https://brainly.com/question/28269290
#SPJ2
If alkali A has a pH value of 13 and alkali B has a pH value of 9, explain which is most likely to be used in indigestion tablets as a remedy for excess stomach acid. *
Answer:
Alkalai B
Explanation:
B because its a weak alkali ie baking soda ph 8.3(sodium bicarbonate)which is used as a remeady of heartburns and stomach acids.
A machine uses filtration to separate a component from orange juice. Which component does the machine most likely separate from the mixture?(1 point)
water
water
pulp
pulp
sugar
sugar
pigment
Which method of separation would be most appropriate for separating a mixture of water and alcohol?(1 point)
chromatography
chromatography
distillation
distillation
filtration
filtration
evaporation
Which method separates components of a mixture according to how quickly the particles travel through a medium?(1 point)
chromatography
chromatography
filtration
filtration
evaporation
evaporation
distillation
The boiling point of water is 100ºC. The boiling point of acetone is 56ºC. Which statement about distilling a mixture of acetone and water is correct?(1 point)
Acetone remains in the original container.
Acetone remains in the original container.
Acetone is captured and cooled.
Acetone is captured and cooled.
Water is collected as it leaves the mixture.
Water is collected as it leaves the mixture.
Water will vaporize from the mixture before acetone.
Substance A and substance B are mixed together. To separate the mixture, water is added, and substance A is filtered out. Then, the remaining liquid is heated to remove the water, leaving a residue of substance B. Which statement about substance A and substance B could be correct?(1 point)
Substance A is rice, and substance B is sugar.
Substance A is rice, and substance B is sugar.
Substance A is sand, and substance B is alcohol.
Substance A is sand, and substance B is alcohol.
Substance A is alcohol, and substance B is salt.
Substance A is alcohol, and substance B is salt.
Substance A is sugar, and substance B is instant coffee.
Pulp
distillation
chromatography
Acetone is captured and cooled.
Substance A is rice, and substance B is sugar.
To separate the components of a mixture the substances to be separated must differ in a given physical property.
In chemistry, there are diverse separation techniques used to separate the components of a mixture. Separation depends on differences in a given physical property such as boiling point, solubility in a solvent, difference in particle size etc.
Filtration can be used to separate a solid from a liquid hence it can be used to separate pulp from orange juice.
To separate water and alcohol, distillation is used because such a separation depends on the difference in the boiling points of water and alcohol. Water boils at a higher temperature than alcohol hence the mixture can be separated by distillation.
Chromatography is a method of separation that is dependent on how quickly a the components of a mixture move through a stationary phase.
Acetone has a lower boiling point than water hence it collected first and cooled before water.
Clearly, substance A must be a solid since it is filtered out after adding water. Substance B must be a water soluble substance which can be recovered from water by evaporation to dryness. Hence substance A is rice, and substance B is sugar.
https://brainly.com/question/11960023
Does the following word describe a theory, law, or both
“Simple”
A) LAW
B) THEORY
C) BOTH THEORY AND LAW
Answer:
B
Explanation:
I would say theory since a law is already set and proven by evidence. Theories arent necessarily proven.
the volume of a gas is 568.4 ml at 23.2 if the temperature is increased to 93.4 without changing the pressure what is the new volume of the gas ?
Answer:
Do not incinerate "why the gas in the gas is initially at 23degree and 360kPa and the can has a volume of 350Ml
D
During a lab experiment performed at STP conditions, you prepare HCl by reacting 100. ml of Cl2 gas with an excess of H2 gas.
How many ml of a solution of Ba(OH)2 0.230M do you need to neutralize all the HCl produced?
Answer: 19.4 mL Ba(OH)2
Explanation:
H2(g) + Cl2(g) --> 2HCl(aq) (make sure this equation is balanced first)
At STP, 1 mol gas = 22.4 L gas. Use this conversion factor to convert the 100. mL of Cl2 to moles.
0.100 L Cl2 • (1 mol / 22.4 L) = 0.00446 mol Cl2
Use the mole ratio of 2 mol HCl for every 1 mol Cl2 to find moles of HCl produced.
0.00446 mol Cl2 • (2 mol HCl / 1 mol Cl2) = 0.00892 mol HCl
HCl is a strong acid and Ba(OH)2 is a strong base so both will completely ionize to release H+ and OH- respectively. You need 0.00892 mol OH- to neutralize all of the HCl. Note that one mole of Ba(OH)2 contains 2 moles of OH-.
0.00892 mol OH- • (1 mol Ba(OH)2 / 2 mol OH-) • (1 L Ba(OH)2 / 0.230 M Ba(OH)2) = 0.0194 L = 19.4 mL Ba(OH)2
PLEASE HELP WILL GIVE BRAINLIEST!!!!
Which of the following is the best definition of a chemical property?
A. The solubility of salt.
B. The ability of gunpowder to explode.
C. The ability of something to undergo a change or reaction.
D. Something that can be observed or measured without changing the identity of the substance.
Answer:
The B. Is perfect match of a definition of chemical property.
Explanation:
The ability of gunpowder to explode.
The ability of gunpowder to explode is the best definition of a chemical property.
What is chemical property?The change of one type of matter into another type of matter and inability to change into the previous forms is called a chemical property. Examples of chemical properties include reactivity and heat of combustion.
So we can conclude that the ability of gunpowder to explode is the best definition of a chemical property.
Learn more about property here: https://brainly.com/question/1538726
#SPJ5
what are the useful of carbon monoxide?
Answer:
carbon monoxide is strong reducing agent.carbon monoxide used in the extraction of pure metals of their ores.
plz mark me as brainliest
why do scientist need govermental funding
a. For a chemistry lab final exam, a high school chemistry student was given a 1-mole sample of CaCl2 and a 1-mole sample of MgCl2 but was not told which sample was which. He was to identify the powders.
He looked up the enthalpies of formation for both of the chemicals and calculated the ΔHreaction for dissolving each powder: CaCl2 (s) Ca 2+ (aq) + 2Cl – (aq), and MgCl2 (s) Mg 2 (aq) + 2Cl – (aq). He then put each powder in a coffee-cup calorimeter and added water.
When sample A dissolved, the temperature increased by 0.74°C. When sample B dissolved, the temperature increased by 0.39°C. Which chemical was A, and which was B? Use the table of enthalpies of formation to help you. Explain your reasoning.
Ca^2+ ion is smaller than Mg^2+ ion hence it has a greater heat of formation or lattice energy.
When a crystal lattice is formed, the energy that is released if the component ions of the compound are brought together from infinity is called the lattice energy. It is the energy released when a crystal lattice is formed from its component ions.
The question lets us know that the heat released by the compounds depends on the energy released upon formation of the compound. Hence, the higher the energy released upon formation, the higher the magnitude of heat released upon dissolution of the compound.
Recall that lattice energy depends on the size of the ions. Thus, the smaller the ions, the higher the lattice energy.
Ca^2+ is smaller than Mg^2+ hence more energy is given off when CaCl2 is formed than when MgCl2 is formed.
As stated above, the greater the lattice energy, the greater the heat released when the lattice dissolves and the higher the rise in temperature.
Putting all these together, Sample A must be CaCl2 while sample B must be MgCl2.
https://brainly.com/question/2815368
what is the relative formula mass of phosphate (PO4)? (To the nearest tenth) A. 187.9 grams B. 46.9 grams C. 23.0 grams D. 94.9 grams
Answer:
[tex]\huge\boxed{94.9\ grams}[/tex]
Explanation:
Relative formula mass of phosphate:
=> [tex]PO_{4}[/tex] [Ignoring the charge on it]
Atomic mass of P = 31.0 grams, O = 15.9 grams
=> 30.97 + 4(15.9)
=> 30.97 + 63.9
=> 94.87
≈ 94.9 grams [To nearest tenth]
Answer:
[tex]\huge \boxed{\mathrm{D. \ 94.9 \ grams}}[/tex]
Explanation:
Phosphate chemical formula is given as,
[tex]\sf PO_4[/tex]
There is one phosphorus atom and four oxygen atoms.
Atomic mass of Phosphorus [tex]\sf P[/tex] = 30.974 grams
Atomic mass of Oxygen [tex]\sf O[/tex] = 15.999 grams
[tex]\Rightarrow 30.974 + 4(15.999)[/tex]
[tex]\Rightarrow 30.974+ 63.996[/tex]
[tex]\Rightarrow 94.97[/tex]
The relative formula mass of phosphate [tex]\sf PO_4[/tex] is 94.9 grams.
WILL MARK BRAINLIEST IF CORRECT
Answer:
3 - a heterogeneous mixture
4- Sweet tea is an homogeneous mixture
Answer:
Explanation:
6. d
7. b
8. c