Answer
D
Explanation:
Potential energy is related to an object's position, and kinetic
energy is related to its motion.
Two balls have the same mass. One ball moving along the positive x–axis and the other ball moving along the positive y–axis undergo perfectly inelastic collision. What can you say about the motion of the balls after the collision?
A.
The balls stick and move together.
B.
The balls separate immediately.
C.
The first ball stops while the other ball starts moving.
D.
The two balls travel off in opposite directions, 180° apart.
Answer:
A. The balls stick and move together.
Explanation:
When a bodies undergo perfectly inelastic collision, the two bodies stick together after the collision and begins to move.
In this collision, kinetic energy is not conserved. For perfectly elastic collision, the two bodies conserve kinetic energy and begin to move apart.
Kinetic energy is not conserved because some of the energy gets converted into other forms of energy.
A B-52 bomber jet flies at a horizontal velocity of 286.2 m/s and at an altitude of 7500 m above the ground. How far away horizontally should a payload be dropped to land on a target?
Answer:
11196.14 m
Explanation:
From the question given above, the following data were obtained:
Horizontal velocity (u) = 286.2 m/s
Height (h) = 7500 m
Horizontal distance (s) =?
Next, we shall determine the time taken for the payload to get to the target. This can be obtained as follow:
Height (h) = 7500 m
Acceleration due to gravity (g) = 9.8 m/s²
Time (t) =?
h = ½gt²
7500 = ½ × 9.8 × t²
7500 = 4.9 × t²
Divide both side by 4.9
t² = 7500 / 4.9
Take the square root of both side
t = √(7500 / 4.9)
t = 39.12 s
Finally, we shall determine the horizontal distance as follow:
Horizontal velocity (u) = 286.2 m/s
Time (t) = 39.12 s
Horizontal distance (s) =.?
s = ut
s = 286.2 × 39.12
s = 11196.14 m
Thus the payload will travel 11196.14 m horizontally in order to hit the target
A car travels west for 200000 m in 12600 s what’s its velocity
Answer:
Velocity = 15.87m/s
Explanation:
Given the following data;
Distance, d = 200000m
Time, t = 12600secs
*To find the velocity*
Velocity can be defined as the rate of change in displacement (distance) with time. Velocity is a vector quantity and as such it has both magnitude and direction.
Mathematically, velocity is given by the equation;
[tex]Velocity = \frac{distance}{time}[/tex]
Substituting into the equation, we have;
[tex]V = \frac{200000}{12600}[/tex]
Velocity = 15.87m/s
Therefore, the velocity of the car is 15.87 meters per seconds due west.
Dr. Aloysius found four homogeneous mixtures, but he thinks that only three are alloys. He tests each one and determines their elemental compositions. Which of the following is not a possible alloy?
A. carbon and boron
B. iron an nickel
C. aluminum and magnesium
D. iron, carbon, and nickel
Answer:
A. carbon and boron
Explanation:
Carbon and boron is not an alloy.
An allow forms between metals and metals using their huge electron could.
Carbon is a non-metal, boron is a also a non-metal
Two non-metals combining together does not make an alloy.
Iron, nickel, aluminum are all metals.
Answer:
carbon and boron
Explanation:
carbon and boron
Write one example situation of Newton's Third Law involving mass that are the same.
Answer:
Examples of Newton's third law of motion are ubiquitous in everyday life. For example, when you jump, your legs apply a force to the ground, and the ground applies and equal and opposite reaction force that propels you into the air. Engineers apply Newton's third law when designing rockets and other projectile devices.
Explain how bar graphs can show comparisons between 2 topics.
Answer:
A bar chart is typically used for the comparison of informations obtained from a data collection by representing each value (information) with rectangular bars respectively.
Explanation:
A bar chart also known as a bar graph can be defined as the graphical representation of data (informations) by using vertical columns or rectangular bars. When a data set is observed, a bar chart can be used to graphically represent or record the total or overall amount of information contained therein. Generally, bar charts are used for the comparison of informations obtained from a data collection by representing each value (information) with rectangular bars respectively.
The bar graph has a x-axis and a y-axis used to represent the various categories of data collected.
In this scenario, the x-axis is used to denote the points earned by the teams while the y-axis is used to denote the seasons as seen in the image attached.
Hence, point scores by team (Team A, B and C) per seasons (2002, 2003, 2004 and 2005) can best be compared through the use of a bar chart (graph).
Answer:
Answer above is correct i only put this:
Explanation:
A bar chart is typically used for the comparison of informations obtained from a data collection by representing each value (information) with rectangular bars respectively.
Choose all the answers that apply.
Check all the statements that are correct.
An independent variable is the variable which is changed.
The dependent variable is the variable which is observed as a result of the change.
If data can be repeated, it cannot be trusted.
Experiments are usually published to communicate findings to the scientific community.
Disproving a hypothesis means it cannot be tested again.
Answer: An independent variable is the variable which is changed. Experiments are usually published to communicate findings to the scientific community.
Disproving a hypothesis means it cannot be tested again.
Explanation: i hoped that helped.
A high-speed train in Japan travels a distance of 300. kilometers in 3.60 x 103 seconds. What is the average speed of this train? (Turn the time into hours by using a unit conversion)
Answer:
The average speed is 83.3 m/s
Explanation:
A rock falls off a cliff that is 82 m high. How fast is the rock moving when it hits the ground?
Answer:
40.1m/s
Explanation:
This is a kinematics problem
x = 82m
a = -9.8m/s^2
v(initial) = 0
Find: v(final)
Using kinematics equation:
vf^2 = vi^2 + 2a(delta)x
vf^2 = 0 + 2*(-9.8)*(82)
vf = sqrt(1607.2) = 40.09m/s
The is traveling with a velocity of 40.1m/s when it hits the ground.
Rate at which wave travels or propagates
Answer:
v =fλ v = f λ where v
Explanation:
Velocity is nothing more than speed
with direction.
True
false
Answer:
False
Explanation:
velocity is more important than speed
Velocity is defined as the speed with direction.
This statement is true.
Velocity is different from speed look below at the differences.
Differences between speed and velocity:Speed is defined as the ratio between distance over time while velocity is given as the ratio of displacement i.e. speed with direction over time.
Example: Velocity is the rate of motion, speed, or action. An example of velocity is a car driving at 75 miles per hour in the north direction.
Thus, the given statement is true.
Find more information about Velocity here:
brainly.com/question/4931057
3N 8N net force???
PLEASE HELP !!!
Answer:
First tell what are the directions and what we've to do?? add subtract or multiply??
A gas occupies 500mL at a temperature of 20 degrees Celsius. What is the volume at 150 degrees Celsius?
Answer: 3750 ML
Explanation:
1.
A student pushes against a wall with 20 N of force and the wall does not move. In this situation, the
wall exerts -
A.
A.20 N of force in the same direction as the push.
B.20 N of force in the opposite direction of the push.
C.less than 20 N of force.
D.more than 20 N of force.
Answer:
B
Explanation:
This is a balanced force. In a balanced force, nothing happens.
Salmon often jump waterfalls to reach their breeding grounds. Starting downstream, 3.04 m away from a waterfall 0.585 m in height, at what minimum speed must a salmon jumping at an angle of 41.7 ◦ leave the water to continue upstream? The acceleration due to gravity is 9.81 m/s 2 . Answer in units of m/s.
Answer:
V₀ = 5.47 m/s
Explanation:
The jumping motion of the Salmon can be modelled as the projectile motion. So, we use the formula for the range of projectile motion here:
R = V₀² Sin 2θ/g
where,
R = Range of Projectile = 3.04 m
θ = Launch Angle = 41.7°
V₀ = Minimum Launch Speed = ?
g = 9.81 m/s²
Therefore,
3.04 m = V₀² [Sin2(41.7°)]/(9.81 m/s²)
V₀² = 3.04 m/(0.10126 s²/m)
V₀ = √30.02 m²/s²
V₀ = 5.47 m/s
Plyometrics can help a person maintain cardiorespiratory fitness. Please select the best answer from the choices provided. T F
Answer: IT IS TRUE
Explanation:
Hope this helps
Plyometrics can help a person maintain cardiorespiratory fitness T
It is TRUE that plyometrics can help a person maintain cardiorespiratory fitness
PlyometricsPlyometrics is a type of exercise training that works with the principle of using speed and force of different movements to build muscle power.
Plyometrics include different types of exercises such as pushups, throwing, running, jumping, and kicking.
Learn more about plypmetrics:
https://brainly.com/question/1526420
Write an equation of the line in slope-intercept form.
You are twice as likely to become good friends with the person who is in the dorm room next to you than the person two doors down. This is due to:
A. Proximity.
B. Common Interests.
C. Shared Values.
D. Social Background
Math Practice: Cart A loaded with blocks (600g) moving left at 0.7m/s hits stationary cart B (200g).
After the collision, both carts move left, Cart A at speed 0.27m/s.
What is the velocity of cart B after the collision? Show your work.
Answer:
The velocity of cart B after the collision is 1.29 m/s.
Explanation:
We can find the velocity of cart B by conservation of linear momentum:
[tex] p_{i} = p_{f} [/tex]
[tex] m_{A}v_{A_{i}} + m_{B}v_{B_{i}} = m_{A}v_{A_{f}} + m_{B}v_{B_{f}} [/tex]
Where:
[tex]m_{A}[/tex] is the mass of cart A = 600 g = 0.6 kg
[tex]m_{B}[/tex] is the mass of cart B = 200 g = 0.2 kg
[tex]v_{A_{i}}[/tex] is the inital velocity of cart A = 0.7 m/s
[tex]v_{A_{f}}[/tex] is the final velocity of cart A = 0.27 m/s
[tex]v_{B_{i}}[/tex] is the initial velocity of cart B = 0
[tex]v_{B_{f}}[/tex] is the final velocity of cart B =?
Taking the left direction as the positive horizontal direction:
[tex] 0.6 kg*0.7 m/s + 0 = 0.6 kg*0.27 m/s + 0.2 kg*v_{B_{f}} [/tex]
[tex] v_{B_{f}} = 1.29 m/s [/tex]
Therefore, the velocity of cart B after the collision is 1.29 m/s.
I hope it helps you!
What is the average amount of time an American spends consuming media in a week?
A. 10 hours
B. 18 hours
C. 22 hours
D. 28 hours
Please collect the best answer from the choices provided
HURRY!!
Answer: D. 28 hours
Explanation: on edge 2020 :))
The average amount of time an American spends consuming media in a week is 28 hour.
What is Media?Media is the plural form of medium, which (broadly speaking) describes any channel of communication. This can include anything from printed paper to digital data, and encompasses art, news, educational content and numerous other forms of information.
The average amount of time an American spends consuming media in a week is 28 hour.
To learn more about media refer to the link:
brainly.com/question/14047162
#SPJ6
what do you mean by 1 watt
A tourist wishes to catch a train in 1.2 hours, which is 115 km away. If she spends the first half-hour going 90km/h, how fast will she need to go to get to station on time?
Answer:
100km/hr
Explanation:
From the problem statement we know that distance of the trip is 115km
Expected time for the trip = 1.2hrs
→ If she spends the first half-hour going 90km/hr,
Here time = 0.5hr
speed = 90km/hr
The distance covered;
Distance covered = Speed x time
Distance covered = 90 x 0.5 = 45km
→The remaining distance will be:
Total distance - distance covered
115km - 45km = 70km
→ The remaining time;
1.2hr - 0.5hr = 0.7hr
Speed = [tex]\frac{distance}{time}[/tex]
Insert the parameters and solve;
Speed = [tex]\frac{70}{0.7}[/tex] = 100km/hr
For the remaining lap, the tourist must travel at a rate of 100km/hr to catch up.
How does changing the initial mass of the copper affect how much heat energy it has?
Answer:
Increasing the temperature of the copper made the final temperature increase and decreasing the temperature of the copper made the final temperature decrease. ... How does changing the initial mass of the copper affect how much heat energy it has? The more copper, the more heat energy.
Explanation:
Decreasing the temperature of the copper made the final temperature decrease. But the mass remains constant.
What is heat energy?Heat is energy that is transmitted from one body to another as a result of a temperature differential. When two bodies of different temperatures come into contact,
Thermal expansion is the tendency of matter to alter its form, area, volume, and density in response to a change in temperature.
Thermal expansion is caused by heating. The mass remains constant. The loudness rises. As a result, the density drops.
To learn more about heat energy refer to the link;
https://brainly.com/question/1495272
In the human circulatory system, arteries carry blood away from the heart to different parts of the body. Veins carry blood from different parts of the body back to the heart. A scientist claims that the greater the amount of exercise a person performs, the greater the amount of oxygen (O2) the body uses. He records the oxygen concentration in the blood of people while they are riding an exercise bike. The graphs show the results of this investigation.
a. Identify at least two systems within the human body that work together during exercise.
b. Explain how the evidence from the data in the graphs supports or does not support the scientist’s claim.
Answer:
There are many different systems involved in when we exercise, the three main ones are the Respiratory system which is involved in breathing the circulatory system which is about circulation of blood around the body and finally the muscular system and finally the Muscular system which is about how we move.
Explanation:
If the data consistently do not support the hypothesis, then CLEARLY, the hypothesis is NOT a reasonable explanation of what you are investigating. The hypothesis is rejected, and we search for a new interpretation, an new hypothesis that supports the experimental data
Respiratory and circulatory systems are the two systems within the human body that work together during exercise.
How does the respiratory and circulatory systems work together during exercise?The respiratory system:
allows the exchange of gases intake of oxygen and exhalation of carbon-dioxide.oxygenation of blood at the lungs.The circulatory system:
transports deoxygenated blood to the lungs for oxygenation.delivers oxygenated blood to the appropriate tissue.Hence, during exercise more oxygen is used by the body.The claim by scientist is true?During exercise:
breathing rate increases from about 15 times per minute to roughly 40–60 times per minute.heart rate also rises, providing more oxygen to reach your muscles and allowing them to continue moving.To learn more about respiratory system, circulatory system, blood, exercise, and oxygen here,
https://brainly.com/question/13128077
#SPJ2
Emily rides on a horizontal rotating platform of radius r at an amusement park
and moves at a linear velocity, vt = 1 m/s, one third the way from the center to the
outer edge, and a rotational velocity of 2 RPM. How much would her linear and
rotational velocities be if she moves to the outer edge?
Answer:
Her linear velocity on the outer edge is 3 m/s
Her rotational velocity, is constant at 2 RPM
Explanation:
The given parameters are;
The radius of the rotating platform = r
The linear velocity v(t) = 1 m/s
The position Emily is riding = 1/3 the distance from the center
The rotational velocity = 2 RPM = 2 Revolutions per minute
The formula for angular velocity, ω is given as follows;
ω = θ/t
Where;
θ = The angle rotated
t = The time taken for the rotation
Given that the rotational velocity = 2 RPM
1 revolution = 2·π radians
The angular velocity, ω = 2×π×(2 RPM) = 4·π rad/min = 4·π/60 rad/seconds
ω = 4·π/60 rad/seconds
The linear velocity, v = r₁×θ/t = r₁×ω
Where;
r₁ = 1/3 × r
v = 1 m/s = 1/3 × r × 4·π/60 rad/seconds
∴ r = 1/(1/3 × 4·π/60) = 45/π meters
r = 45/π meters
Therefore her linear velocity, v₂ and her rotational velocity if she moves to the outer edge will be given as follows;
v₂ = r × ω = 45/π × 4·π/60 = 3 m/s
Her linear velocity on the outer edge, v₂ = 3 m/s
Her rotational velocity, remains at 2 RPM.
How much time will it take for a truck to travel 20 meters if it is traveling at 4 m/s?
Answer:
The answer is 5 sExplanation:
The time taken can be found by using the formula
[tex]t = \frac{d}{v} \\ [/tex]
d is the distance
v is the velocity
From the question we have
[tex]t = \frac{20}{4} \\ [/tex]
We have the final answer as
5 sHope this helps you
20. Show that an acceleration of 0.67 m/s/s is the result if a force of 1000N is exerted on a 1500 kg
car.
Explanation:
Given parameters:
Mass of the car = 1500kg
Force applied = 1000N
Acceleration = 0.67m/s²
Unknown:
Proof that the acceleration will result from the applied force on the car
Solution:
According to newton's second law of motion,
Force = mass x acceleration
So;
Acceleration = [tex]\frac{Force }{mass}[/tex]
Now insert the parameters and solve;
Acceleration = [tex]\frac{1000}{1500}[/tex] = 0.67m/s²
We have shown that the acceleration is 0.67m/s²
A turtle is moving at a speed of 1.5 m/s for a time of 120 s. What is the distance the turtle travels?
Answer:
The answer is 180 mExplanation:
The distance covered by an object given it's velocity and time taken can be found by using the formula
distance = velocity × time
From the question we have
distance = 1.5 × 120
We have the final answer as
180 mHope this helps you
Answer:
180 meters
Explanation:
1.5 m/s x 120 s
What is the gravitational acceleration on which a 2-kilogram mass has a weight of 16 Newton's?
Answer:8 m/s ^2
Explanation:
in the movie "gravity" - Why did the escape pod get stuck and pulled back?
Answer:
because nono gravity
Explanation:
no gravity