Read the article. Use your understanding to answer the questions that follow. What type of source is this article? primary or secondary and how do you know

Answers

Answer 1

Answer: C

Explanation:

The article was sourced from the Oak National Laboratory

Which reasons did you include in your response? Check all of the boxes that apply.

1. The article does not present original research.

and

3. The article has references to primary sources.

Answer 2

Answer:

C

Explanation:

Which reasons did you include in your response? Check all of the boxes that apply.

The article does not present original research.

The article summarizes other research.

The article has references to primary sources.


Related Questions

Which term describes the repeated arrangement of the same molecule?

Answers

Answer:

1. C

Carbon atoms

2. C

CH3CH2OH

3. C

extended structure

AND 4. B

One grey sphere, four white spheres, one red sphere

TOOK THE QUIZ. YOUR WELCOME :))

The term which describe the repeated arrangement of same molecules is extended structure. Thus option D is correct.    

What is extended structure?

Extended structure can be defined as a structure in which the subunits are arranged in a repeating pattern and occur in a consistent ratio.

Sodium chloride and diamond are some of the example of extended structure.

The expanded or extended  structure departs from the bilayer configuration, with well-separated hydrophilic and hydrophobic layers made up of propagating chains along the calixarene cavity axis are some characteristics.  

Thus, the term which describe the repeated arrangement of same molecules is extended structure. Thus option D is correct.  

To learn more about extended structure, refer to the link below:

https://brainly.com/question/21597101

#SPJ2

Your question is incomplete but probably your complete question was

Which term describes the repeated arrangement of the molecule?

A. Bonds

B. Atoms

C. Molecular Model

D. Extended Structure

When 1604 J of heat energy is added to 48.9 g of hexane, C6H14, the temperature increases by 14.5 ∘C. Calculate the molar heat capacity of C6H14.

Answers

Answer:

THE MOLAR HEAT CAPACITY OF HEXANE IS 290.027 J/ C

Explanation:

1604 J of heat is added to 48.9 g of hexane

To calculate the molar heat capacity of hexane, it is important to note that the molar heat capacity of a substance is the measure of the amount of heat needed to raise 1 mole of a substance by 1 K.

Since 1604 J of heat = 48.9 g of hexane

Molar mass of hexane = 86 g/mol = 1 mole

then;

1604 J = 48.9 g

x = 86 g

x = 1604 * 86 / 48.9

x = 4205.4 J

Hence, 4205.4 J of heat will be added to 1 mole or 86 g of hexane to raise the temperature by 14.5 C.

In other words,

heat = molar heat capacity * temperature change

molar heat capacity = heat/ temperature change

Molar heat capacity = 4205.4 J / 14.5 C

Molar heat capacity = 290.027 J/C

The molar heat capacity of hexane is 290.027 J/ C

What is the rate constant of a reaction if rate = 1 x 10-2 (mol/L)/s, [A] is 2 M,
[B] is 3 M, m = 2, and n = 1?

Answers

Answer:

[tex]0.10 \text{ L$^2$mol$^{-2}$s$^{-1}$}[/tex]

Explanation:

The general formula for a rate law is

[tex]\text{rate} = k\text{[A]}^m \text{[B]}^{n}[/tex]

With your numbers, the rate law becomes

1.2 mol·L⁻¹s⁻¹ = k(2 mol·L⁻¹)²(3 mol·L⁻¹)¹ = k × 4 mol²L⁻² × 3 mol·L⁻¹

= 12k mol³L⁻³

[tex]\\ k = \dfrac{\text{1.2 mol $\cdot$ L$^{-1}$s$^{-1}$} }{12\text{ mol$^{3}$L}^{-3}} = \mathbf{0.10} \textbf{ L$\mathbf{^2}$mol$^{\mathbf{-2}}$s$^{\mathbf{-1}}$}[/tex]

A skydiver slows down from 65 m/s to 5 m/s by opening the parachute. If this
takes 0.75 seconds, what is the skydiver's acceleration?
A. 45 m/s2 up
B. 80 m/s2 up
C. 45 m/s2 down
D. 80 m/s2 down

Answers

Answer:

D. -80m/s^2

Explanation:

V = u + at

5 = 65 + a (0.75)

0.75a = -60

a = -60/0.75

a = -80m/s^2

Therefore, is decelerating at 80m/s^2

Answer:

[tex]\boxed {\boxed {\sf D. \ 80 \ m/s^2 \ down}}[/tex]

Explanation:

We are asked to find the acceleration of a skydiver. Acceleration is the change in velocity over the change in time, so the formula for calculating acceleration is:

[tex]a= \frac{v_f-v_i}{t}[/tex]

The skydiver was initially traveling 65 meters per second, then he slowed down to a final velocity of 5 meters per second. He slowed down in 0.75 seconds.

[tex]\bullet \ v_f = 5 \ m/s \\\bullet \ v_i= 65 \ m/s \\\bullet \ t= 0.75 \ s[/tex]

Substitute the values into the formula.

[tex]a= \frac{ 5 \ m/s - 65 \ m/s}{0.75 \ s}[/tex]

Solve the numerator.

[tex]a= \frac{-60 \ m/s}{0.75 \ s}[/tex]

Divide.

[tex]a= -80 \ m/s^2[/tex]

The acceleration of the skydiver is -80 meters per second squared or 80 meters per second squared down. The skydiver is slowing down or decelerating, so the acceleration is negative or down.

Name the following compound from the concise formula:______.
CH3CH(CH3)CHCHCH(CH3)CH2CH3
A. 2,4-dimethyl-3-heptene
B. 2,5-dimethyl-3-heptene
C. 3,5-dimethyl-3-heptene
D. 2,5-dimethyl-4-heptene

Answers

Answer:

B. 2,5-dimethyl-3-heptene

Explanation:

Answer:

B. 2,5-dimethyl-3-heptene

Explanation:

What is the concentration of A after 50.7 minutes for the second order reaction A → Products when the initial concentration of A is 0.250 M? (k = 0.117 M⁻¹min⁻¹)

Answers

Answer:

0.101 M

Explanation:

Step 1: Given data

Initial concentration of A ([A]₀): 0.250 MFinal concentration of A ([A]): ?Time (t): 50.7 minRate constant (k): 0.117 M⁻¹.min⁻¹

Step 2: Calculate [A]

For a second-order reaction, we can calculate [A] using the following expression.

1/[A] = 1/[A]₀ + k × t

1/[A] = 1/0.250 M + 0.117 M⁻¹.min⁻¹ × 50.7 min

[A] = 0.101 M

Hey. what is the difference between a boulder and a rock? ]
And bonus: what did the duck say when she bought lipstick?

Answers

Answer:

The difference between a rock and a boulder can be explained in terms of size and detachment. A rock is defined by geologists as an aggregate of minerals. A boulder is a type of rock, specifically a large detached one. All boulders are rocks, but not all rocks are boulders.

A compound is found to contain 11.21 % hydrogen and 88.79 % oxygen by mass. What is the empirical formula for this compound?

Answers

Answer:

H₂O

Explanation:

The empirical formular of the compound is obtained using the following steps;

Step 1: Divide the percentage composition by the atomic mass

Hydrogen = 11.21 / 1 = 11.21

Oxygen = 88.79  / 16 = 5.55

Step 2: Divide by the lowest number

Hydrogen  = 11.21 / 5.55 = 2.02 ≈ 2

Oxygen = 5.55 / 5.55 = 1

This means the ratio of the elements is 2 : 1

The empirical formular (simplest formular of a compound) of the compound is;

H₂O

Answer:Empirical formula ======== H₂O    

Explanation:The empirical formula of a compound shows the whole number ratio for  each atom in a compound.

To find empirical formula. we follow the below steps

The total mass of the compound here  is 100 grams, that is (11.21% of hydrogen + 88.79% of oxygen) we can then  assume 11.21 grams  of hydrogen and 88.79grams of oxygen

                                          Hydrogen                   Oxygen

1.composition by mass    11.21                              88.79

molecular weight              1.007g/mol               15.990g/mol

2.Divide composition by mass  11.21/1.007            88.79/15.99    

by each molecular weight to get 11.13                            5.553

no of moles

3 Divide by the least number of moles

to get atomic ratio                       11.13/5.553          5.553/5.553

                                                         2.004                           1.00

4.Convert  to whole numbers             2                                 1

Empirical formula ======== H₂O    

The two common properties of all solids are fixed _____ and _____.

Answers

Answer:

shape

volume

Hope this helps! (づ ̄3 ̄)づ╭❤~

Explanation:

Shape and volume is the correct answer

Identify a homogeneous catalyst. Identify a homogeneous catalyst. Pd in H2 gas N2 and H2 catalyzed by Fe SO2 over vanadium (V) oxide Pt with methane H2SO4 with concentrated HCl

Answers

Answer:

H2SO4 with concentrated HCl

Given the balanced chemical equation for the decomposition for INO, and the rate of disappearance of INO, write the expressions for the rates of appearance of I2 and NO.

2INO(g) → I2(g) + 2NO(g)

Reactant: Product(I2): Product(NO):

-∆[INO]/2∆t = ??/??

Answers

Answer:

rate of disappearance of -0.5d[INO]/dt

rate of appearance of I2 = d[I2]/dt

rate of appearance of No = 0.5*d[NO]/dt

Explanation:

According to chemical equilibrium,  d[I₂]/dt and d[NO]/dt is  the expressions for the rates of appearance of I₂ and NO respectively.

What is chemical equilibrium?

Chemical equilibrium is defined as the condition which arises during the course of a reversible chemical reaction with no net change in amount of reactants and products.A reversible chemical reaction is the one wherein the products as soon as they are formed react together to produce back the reactants.

At equilibrium, the two opposing reactions which take place take place at equal rates and there is no net change in amount of the substances which are involved in the chemical reaction.At equilibrium, the reaction is considered to be complete . Conditions which are required for equilibrium are given by quantitative formulation.

Factors which affect chemical equilibrium are change in concentration , change in pressure and temperature and presence of catalyst.

Learn more about chemical equilibrium,here:

https://brainly.com/question/4289021

#SPJ6

An unknown gas diffuses 5 times slower than that of H2.The moleculer mass of unknown gas is??

Answers

Answer:

50.

Explanation:

We can write Graham's Law of Diffusion as:

(Rate 1)^2 = Molecular Mass 2

--------------    -------------------------

(Rate 2)^2    Molecular Mass 1

So using the Given Information:

1^2  / (1/5)^2 = Molecular Mass of unknown gas / 2, so:

25 = M/2

M = 50.

Glucose is soluble in water. Why is cellulose, which is made up of glucose, insoluble in water?​

Answers

.....................

Cellulose is insoluble in water which is made up of glucose because it possesses high inter and intramolecular hydrogen bonding between the hydroxyl groups of the neighboring chains.

What is the function of cellulose?

Due to being insoluble in nature, it serves as the fundamental component of the cell membrane in the plant. This is why the cell wall of plant cells are made of cellulose.

The chains of the cellulose are strongly bonded to each other. So, it is very difficult for the molecules of water to rupture or destruct these bonds between the chains. It is a hydrogen bond cross-linked polymer and more complex than glucose.

Therefore, due to high inter and intramolecular hydrogen bonding between the hydroxyl groups of the neighboring chains, cellulose is insoluble in water.

To learn more about Cellulose, refer to the link:

https://brainly.com/question/1768072

#SPJ2

The valves in the heart open and close to move blood in between heart chambers. O a) three directions O b) two directions O c) four directions d) one direction

Answers

Answer:

im not sure but i think its four directions

Hi,

The valves in the heart open and close to move blood in between heart chambers.

Answer:

d) one direction

A critical reaction in the production of energy to do work or drive chemical reactions in biological systems is the hydrolysis of adenosine triphosphate, ATP, to adenosine diphosphate, ADP, as described by the reaction

ATP(aq)+H2O(l)→ADP(aq)+HPO2−4(aq) for which ΔGrxn=30.5 kJ/mol at 37.0∘C and pH 7.0.

Required:
Calculate the value of ΔGrxn in a biological cell in which [ATP]=5.0 mM, [ADP]=0.60 mM, and [HPO2−4]=5.0 mM

Answers

Answer:

ΔG  = -49.64 KJ/mol

Explanation:

The actual free energy change of the reaction under the given conditions,  ΔG is given by the formula below;

ΔG = ΔG'° + RT ln([ADP][HPO₂⁴⁻] / [ATP])

where ΔG'° = -30.5 KJ/mol; R = 8.315 J/mol.K; T = 37°C = 310 K; [ADP] = 5.0 mM = 0.005 M; [HPO₂⁴⁻] = 0.60 mM = 0.0006 M; [ATP] = 5.0 mM = 0.005 M

ΔG = -30.5 KJ/mol + (8.315 J/mol.K)(310 K) ln {(0.005)(0.0006)/(0.005)}

ΔG = -30.5 KJ/mol + (2.58 KJ/mol * -7.4186)

ΔG = -30.5 KJ/mol - 19.14 KJ/mol

ΔG  = -49.64 KJ/mol

Calculate the [H+] and pH of a 0.0010 M acetic acid solution. The Ka of acetic acid is 1.76×10−5. Use the method of successive approximations in your calculations.

Answers

Answer:

[tex][H^+]=0.000123M[/tex]

[tex]pH=3.91[/tex]

Explanation:

Hello,

In this case, dissociation reaction for acetic acid is:

[tex]CH_3COOH\rightleftharpoons CH_3COO^-+H^+[/tex]

For which the equilibrium expression is:

[tex]Ka=\frac{[CH_3COO^-][H^+]}{[CH_3COOH]}[/tex]

Which in terms of the reaction extent [tex]x[/tex] could be written as:

[tex]1.74x10^{-5}=\frac{x*x}{[CH_3COOH]_0-x}=\frac{x*x}{0.0010M-x}[/tex]

Thus, solving by using a solver or quadratic equation we obtain:

[tex]x_1=0.000123M\\\\x_2=-0.000141M[/tex]

And clearly the result is 0.000123M, which also equals the concentration of hydronium ion in solution:

[tex][H^+]=0.000123M[/tex]

Now, the pH is computed as follows:

[tex]pH=-log([H^+])=-log(0.000123)\\\\pH=3.91[/tex]

Best regards.

Complete the following reactions
need answers?

i) P + [H]

ii) O2 + [H]

iii) LiH + H2O

iv) CaC2 +H2O

v) NaH + H2O

vi) CaH2 H2O

Answers

Answer:

this reaction will produce phosphine

P+H---->PH

this reaction will produce water

O2+H---->H2O

this reaction will produce lithium hydroxide and hydrogen gas

LiH+H2O---->LiOH+H2

this reaction will produce calcium hydroxide and acetylene gas

CaC2+H2O---->Ca(OH)2+C2H2

this reaction will produce sodium hydroxide and hydrogen gas

NaH+H2O---->NaOH+H2

this type of reaction will produce calcium hydroxide and hydrogen gas

CaH2+H2O---->CaOH+H2

I hope this helps

A 2.87g sample of carbon reacts with hydrogen to form 3.41g of car fuel. What is the empirical formula of the car fuel?

Answers

Answer:

The empirical formulae for the car fuel is C4H9

The ceramic glaze on a red-orange Fiestaware plate is U2O3 and contains 50.1 grams of 238U, but very little 235U. (a) What is the activity of the plate (in Ci)

Answers

Answer:

The correct answer is 1.68 × 10⁻⁵ Ci

Explanation:

The activity of the uranium is determined by using the formula,  

R = 0.693 N/t1/2 -------------- (i)

The number of atoms is, N = nNA

Here, NA is the Avogadro number and n is the number of moles. The value of n is m/M, that is, mass/molecular mass. Now the value of N becomes,  

N = (m/M) NA

The m or mass of uranium given is 50.1 grams, and the molecular mass is 238 g/mol, now putting the values we get,  

N = (50 g/238 g) (6.023 × 10²³) = 1.26 × 10²³

The half-life of 238U from year to second is,  

t1/2 = (4.468 × 10⁸ year) (3.16 × 10⁷ s/ 1 year) = 1.412 × 10¹⁶ s

Substituting the values of t1/2 as 1.412 × 10¹⁶, and 1.26 × 10²³ for N in equation (i) we get,  

R = 0.639 (1.26 × 10²³) / 1.412 × 10¹⁶ s  

= 6.18 × 10⁶ Bq (2.7027 × 10⁻¹¹ Ci/1 Bq)

= 1.68 × 10⁻⁵ Ci

Hence, the activity of the plate is 1.68 × 10⁻⁵ Ci

What are the correct half reactions for the following reaction: Cu2+ + Mg -> Cu + Mg2+

Answers

Answer:

Cu2 + 2Mg-> 2Cu+ Mg2

Explanation:

Balance the equation and make sure both the reactant and the products are the same

Hope it will be helpful

[tex]Cu^{+2} + 2Mg[/tex]  -> [tex]2Cu + Mg^+2[/tex]  is the correct half-reactions.

What is a balanced equation?

A balanced equation is an equation for a chemical reaction in which the number of atoms for each element in the reaction and the total oxidation numbers is the same for both the reactants and the products.

[tex]Cu^{+2} + 2Mg[/tex]  -> [tex]2Cu + Mg^+2[/tex] is the correct half-reactions.

Magnesium is oxidized because its oxidation state increased from 0 to +2 while Cu is reduced because its oxidation state decreased from +2 to 0.

Learn more about balanced equations here:

brainly.com/question/15052184

#SPJ5

An unknown compound has the following chemical formula:
Co(OH),
where x stands for a whole number.
Measurements also show that a certain sample of the unknown compound contains 5.1 mol of oxygen and 2.59 mol of cobalt.
Write the complete chemical formula for the unknown compound.

Answers

since we are given the moles for Co and O, we'll divide both of those moles by the lowest mole quantity, which is, in this case, 2.59. After dividing, we see that the ratio of O to Co is 2:1. So, for every 1 Co atom, there has to be 2 O atoms. we can then insert the 2 in for OH to satisfy this ratio.

What is the molarity of 4 g of NaCl dissolved in 100mL of water?

Answers

Answer:

[tex]M=0.684M[/tex]

Explanation:

Hello,

In this case, considering that the solution is formed by NaCl as the solute and water as the solvent, we can compute the molarity as shown below:

[tex]M=\frac{mol_{solute}}{V_{solution}}[/tex]

Whereas the volume of the solution must be in liters. In such a way, since the addition of sodium chloride does not significantly changes the volume of the solution we can say it remains in 100 mL (0.100 L) and the moles of sodium chloride are computed by using its molar mass (58.45 g/mol):

[tex]mol_{solute}=4g*\frac{1mol}{58.45g} =0.0684mol[/tex]

Therefore, the molarity is:

[tex]M=\frac{0.0684mol}{0.100L} \\\\M=0.684\frac{mol}{L}=0.684M[/tex]

Regards.

Which of the following elements is in the same group as Sulfur (S)?

Answers

Answer:

PLEASE SHOW ME THE ELEMENTS OR I WOULD ENLIST ALL THE ELEMENTS.

Explanation:

Group 6A (or VIA) of the periodic table are the chalcogens: the nonmetals oxygen (O), sulfur (S), and selenium (Se), the metalloid tellurium (Te), and the metal polonium (Po)

Given that π = n M R T, rearrange the equation to solve for V

Answers

Answer:

V= n/M

Explanation:

From;

π = nRT/V = MRT

Where;

n= number of moles

R= gas constant

T= absolute temperature

M= molar mass

V= volume of the solution

π= osmotic pressure

Thus;

nRT/V = MRT

nRT = VMRT

V= nRT/MRT

V= n/M

3. Write the following isotope in hyphenated form (e.g., "carbon-14”): Kr
a. Krypton-109
b. Krypton -37
c. Krypton -36
d. Krypton -73​

Answers

Answer:

Krypton -73

Explanation:

There are 33 known isotopes of krypton (36Kr) with atomic mass numbers from 69 through 101.

Good luck!

Answer:

D. Krypton-73

Explanation:

An isotope of an element has the same atomic number and the same number of protons but a different number of neutrons and a different atomic weight. Krypton is the 36th element on the periodic table. It has 36 protons and 48 neutrons. Krypton-73 is one of 33 known isotopes of Krypton and is the only one that actually exists from the list of choices.

Hope that helps.

clacium hydroxide is slightly soluable in water about 1 gram will dissolve in 1 liter what are the spectator ions in the reaction ions in the reaction of such a dilute solution of calcium hydroxide with hydrochloric acid

Answers

Answer:

Ca²⁺ and Cl⁻

Explanation:

In a chemical reaction, spectator ions are ions that are not involved in the reaction, that means are the same before and after the reaction.

In water, calcium hydroxide, Ca(OH)₂ is dissociated in Ca²⁺ and OH⁻. Also, hydrochloric acid, HCl, dissociates in H⁺ and Cl⁻. The reaction is:

Ca²⁺ + 2OH⁻ + 2H⁺ + 2Cl⁻ → 2H₂O + Ca²⁺ + 2Cl⁻

The ions that react are H⁺ and OH⁻ (Acid and base producing water)

And the ions that are not reacting, spectator ions, are:

Ca²⁺ and Cl⁻

For the reaction CO2(g) + H2(g)CO(g) + H20(g)
∆H°=41.2 kJ and ∆S°=42.1 J/K
The standard free energy change for the reaction of 1.96 moles of Co2(g) at 289 K, 1 atm would be_________KJ.
This reaction is (reactant, product)___________ favored under standard conditions at 289 K.
Assume that ∆H° and ∆S° are independent of temperature.

Answers

Answer:

The ΔG° is 29 kJ and the reaction is favored towards reactant.

Explanation:

Based on the given information, the ΔH°rxn or enthalpy change is 41.2 kJ, the ΔS°rxn or change in entropy is 42.1 J/K or 42.1 * 10⁻³ kJ/K. The temperature given is 289 K. Now the Gibbs Free energy change can be calculated by using the formula,  

ΔG° = ΔH°rxn - TΔS°rxn

= 41.2 kJ - 289 K × 42.1 × 10⁻³ kJ/K

= 41.2 kJ - 12.2 kJ

= 29 kJ

As ΔG° of the reaction is positive, therefore, the reaction is favored towards reactant.  

If 75.4 J of energy is absorbed by 0.25 mol of CCl4 at constant pressure, what is the change in temperature? The specific heat of CCl4 is 0.861 J/g·°C.

Answers

Answer:

ΔT = 2.28°C

Explanation:

Heat, H = 75.4J

Number of moles = 0.25 mol

Specific heat capacity, c = 0.861 J/g·°C

Change in temperature, ΔT = ?

These quantities are related by the following equation;

H = mc ΔT

Mass, m = Number of moles * Molar mass

m = 0.25mol * 153.82 g/mol

m = 38.455g

S back to the equation;

H = mc ΔT

Substituting the values;

75.4 = 38.455 * 0.861 * ΔT

ΔT = 75.4 /  33.11

ΔT = 2.28°C

The change in temperature is 2.28 °C

First, we will determine the mass of CCl₄ absorbed

From the given information,

Number of moles of CCl₄ absorbed = 0.25 mol

Using the formula

Mass = Number of moles × Molar mass

Molar mass of CCl₄ = 153.82 g/mol

∴ Mass of CCl₄ absorbed = 0.25 × 153.82

Mass of CCl₄ absorbed = 38.455 g

Now, using the formula

Q = mcΔT

Where Q is the quantity of heat

m is the mass

c is the specific heat of substance

and ΔT is the change in temperature

From the given information

Q = 75.4 J

c = 0.861 J/g.°C

Putting the parameters into the formula, we get  

75.4 = 38.455 × 0.861 ×ΔT

75.4 = 33.109755 × ΔT

∴ ΔT = 75.4 ÷ 33.109755

ΔT = 2.28 °C

Hence, the change in temperature is 2.28 °C

Learn more here: https://brainly.com/question/13439286

What do you predict the chemical formula for the compound formed between calcium and sulfur?

Answers

Answer:

calcium donates two vanence electrons to sulfur atom to form Ca2+ ion and an S2+ - ion

oxide. b) Silicon dio
43. What is the nature of an enzyme?
a) Vitamin. b) Lipid. c) Carbohydrate. d) Protein
44. Name the enzyme which catalyzes the oxidation-reduction reaction?
a) Transaminase. b) Glutamine synthetase. c) Phosphofructokinase. d) Oxidoreductase
nontido

Answers

Answer:

43) protein

44) oxidoreductase

Other Questions
According to the conservation of mechanical energy, the kinetic energy before plus the kinetic energy after equals thepotential energy before plus the potential energy after.TrueFalse Start where you are. Use what you have. Do what you can Arthur Ashe.1. What do you think these words mean (translate them in a simpler way)? 2. How can these words help you or someone you know? How do you complete the square of x2+8x+26? Velocity is a description of an objects _____. Read and choose the option with the irregular verb in the imperfect tense. (2 points)Select one:a.Antes, mi ahijado me vea como una persona estricta.b.Los lunes vas al gimnasio.c.Mi suegra fue fuerte en la oficina del doctor.d.Practicbamos deportes para estar sanos. Gross domestic product is a macroeconomic measure that describes:A. The value of the goods produced in a country divided by its population B. The percentage of people who are looking for a job but cannot find one C. The total value of goods and services a country produces in a year D. The increases in prices of consumer goods over a period of time Jerry, a partner with 30 percent capital and profits interest, received his Schedule K-1 from Plush Pillows, LP. At the beginning of the year, Jerry's tax basis in his partnership interest was $44,000. His current-year Schedule K-1 reported an ordinary loss of $9,000, long-term capital gain of $4,600, qualified dividends of $3,600, $2,100 of non-deductible expenses, a $26,000 cash contribution, and a reduction of $5,600 in his share of partnership debt. What is Jerry's adjusted basis in his partnership interest (outside basis) at the end of the year Arrange the terms of each polynomial so that the powers of X are in descending order. Please help 49. At 0900Z on the 24th, a tropical cyclone forecast/advisory contains the following information: FORECAST VALID 24/1800Z 21.9N 78.1W MAX WIND 90 KT...GUSTS 110 KT. 64 KT... 30NE 0SE 0SW 0NW 50 KT...100NE 100SE 30SW 30NW 34 KT...135NE 125SE 75SW 125NW What does this information tell you Which of the following is the balanced reaction, given the rate relationships below.a. rate = 13 [CH4] t = 12 [H2O] t = [CO2] t = 14 [CH3OH] t b. rate = 12 [N2O5] t = 12 [N2] t = 15 [O2] t c. rate = 12 [H2] t = 12 [CO2] t = [O2] t = 12 [H2CO3] t Consider the following. x = t2 2t, y = t5, 1 t 4 Set up an integral that represents the length of the curve. 4 1 dt Use your calculator to find the length correct to four decimal places. Three children are riding on the edge of a merry-go-round that is a solid disk with a mass of 102 kg and a radius of 1.53 m. The merry-go-round is initially spinning at 9.71 revolutions/minute. The children have masses of 31.7 kg, 29.0 kg and 31.9 kg. If the child who has a mass of 29.0 kg moves to the center of the merry-go-round, what is the new angular velocity in revolutions/minute CP = Rs 720 and SP = Rs 810 2.1explain the body's hormonal response to dehydration Please help!! find the circumference of a circle with a diameter of 13 meters find the square root and of 1+i3 On January 1, 2018, Frontier World issues $40.7 million of 9% bonds, due in 20 years, with interest payable semiannually on June 30 and December 31 each year. The proceeds will be used to build a new ride that combines a roller coaster, a water ride, a dark tunnel, and the great smell of outdoor barbeque, all in one ride. rev: 11_03_2016_QC_CS-68413 Required: 1-a. If the market rate is 8%, calculate the issue price. (FV of $1, PV of $1, FVA of $1, and PVA of $1) When a bacterium such as E. coli is shifted from a warmer growth temperature to a cooler growth temperature, it compensates by A person is a biological creature by birth.How does he change into a social creature?Explain plz tell me this all answer plz AB and CD intersect at point O, ACO DBO, and BO CO . Prove that ACO DBO. Plz Help Me... Thanks