sodium plus chloroform sodium chloride friends in the balance equation home​

Answer:

type of particles

Explanation:

Considering te definition of idela gas law, the correct answer is option C. type of particles is a  factor that doesn't determine the movement of particles in the atoms or molecules of a gas according to the ideal gas law.

An ideal gas is a theoretical gas that is considered to be composed of point particles that move randomly and do not interact with each other. Gases in general are ideal when they are at high temperatures and low pressures.

The pressure, P, the temperature, T, and the volume, V, of an ideal gas, are related by a simple formula called the ideal gas law:  

P×V = n×R×T

where P is the gas pressure, V is the volume that occupies, T is its temperature, R is the ideal gas constant, and n is the number of moles of the gas. The universal constant of ideal gases R has the same value for all gaseous substances.

Finally, pressure, temperature and volume are factors that determine the movement of particles in the atoms or molecules of a gas according to the ideal gas law.

So, the correct answer is option C. type of particles is a  factor that doesn't determine the movement of particles in the atoms or molecules of a gas according to the ideal gas law.

Learn more:

Answer:

The formula for finding speed using binding energy and mass is E=mc2.

Answer:

44 neutrons

Explanation:

To find the neutrons of an atom subtract the atomic number from the mass of the atom

in this case

80-36=44

tge number of neutrons that are in that atom is 48

Answer:

Explanation:

                        N₂(g) + O₂(g) ⇄ 2NO( g )

We shall apply Le Chatelier's principle to see the effect of decrease in volume or increase in concentration on the effect of state of equilibrium in the reaction given .

In this reaction 1 volume of nitrogen gas reacts with 1 volume of oxygen to give 2 volume of NO gas . In total there is no change in volume due to reaction . So when we change the volume , the concentration of reactant and product will affect the rate of forward and reverse reaction . Overall there will be no change in the state of equilibrium . The equilibrium will neither shift to the right nor will shift to the left.

It will remain unchanged .

Answer:

The correct option is;

d) LiF

Explanation:

The Lattice energy of ionic compounds can be calculated using the modified Coulomb's law as follows;

[tex]U = \dfrac{k' \cdot Q_1\cdot Q_2}{r_0}[/tex]

Where;

Q₁ and Q₂ =  The ionic charges

k' = A constant depending on the ionic and valence configuration

r₀ = The distance between the two nucleus

Given the four compounds each of the metallic ions are of the same group (group one) have the same (only one) valence electron, and are combined to the same ion (fluoride ion) such that Q₂, is the same for all compounds, the factor that will influence the lattice energy more will be the r₀

The sizes of the atoms Li, Na, K and Cs increases as arranged as such Li has the least r₀, and therefore LiF the least  lattice energy

From chemistry test online, we have;

The lattice energy of LiF = -1045 kJ/mole

The lattice energy of NaF = -924 kJ/mole

The lattice energy of KF = -822 kJ/mole

The lattice energy of CsF = -737 kJ/mole.

cubic unit cell is the smallest repeated unit which have all angles equal to 90 and all have edge lengths equal

It is the type of the Unit cell which is having all angles equal to 90 and all sides equal to each other

it's is a unit cell with cubic structure

Answer:

Wavelength (λ) = 1.875 × 10⁻⁶ m

Explanation:

Given:

Energy (e) =  1.06 × 10⁻¹⁹ J

Find:

Wavelength (λ) = ?

Computation:

e = hc / λ

λ = hc / e

where c = 3 × 10⁸

Planck's constant (h) = 6.625 × 10⁻³⁴

So,

Wavelength (λ) = (6.625 × 10⁻³⁴)(3 × 10⁸) / (1.06 × 10⁻¹⁹)

1. Wavelength (λ) = 1.875 × 10⁻⁶ m

2. Given n = 4 to n = 3 both are integer not fraction so, electron is quantize

Answer: Weigh boat

Explanation:

they are disposable and will likely melt

Weigh boat among the following  should not be used to hold chemicals while they are being heated ,therefore option (b) is correct.

Weigh boats are ideal for general-purpose weighing, evaporating, dispensing, and storing applications. Compatible with balances and dryers, these pans support precise measurements.

A weigh boat is an open container often used in chemistry and bio chemistry. It is used if you want to weigh a sample very accurately.

A weigh boat is an object that is used to protect your balance from any object you want to weigh.

Weigh boat among the following  should not be used to hold chemicals while they are being heated ,hence option (b) is correct.

Learn more about weigh boats ,here:

https://brainly.com/question/14555250

#SPJ2

Answer:

C. 1 cubic foot of loose sand

Explanation:

For many  objects having equal volume , surface area will be maximum

of the object which has spherical shape .

But when a sphere is broken into tiny small spheres , total surface area of all the small spheres will be more than surface area of big sphere .

Hence among the given option , surface area of loose sand will have greatest surface area . Loose sand is equivalent to small spheres .

Answer:

the answer would be C 1 cubic foot of loose sand.

Explanation:

89cjowdncu8wncuhrwionu9wjvionajofhjowednuiw4fmji2rn most jom4opr

Answer:

The correct answer is quantitative data.

Explanation:

The value of data in the form of numbers of counts where each set of data exhibits a specific numerical value associated with it is termed as quantitative data. This information refers to any quantifiable knowledge, which can be used for statistical analysis and mathematical calculations so that decisions of real-life can be taken based on the mathematical outcomes. The quantitative data is used to find the solutions of the queries like how often, how much, or how many.  

In the given case, a botanist measured the growth of the plant for two weeks, and the outcome came in the form of numerical value. Thus, the knowledge she collected is known as quantitative data.  

Answer:

The noble as structures attained are helium and argon

Explanation:

The electron configuration of chlorine atom is 1s²2s²2p⁶3s²3p⁵

The elecron configuation of hydrogen is 1s¹

The electron configuration of argon atom is 1s²2s²2p⁶3s²3p⁶

The elecron configuation of helium gas is 1s²

Therefore, in the hydrogen chloride molecule the hydrogen and the chlorine each share one electron from the other atom to attain the the stable noble gas structure of helium for hydrogen and argon for chlorine.

Answer:

the shape would be square planar.

Explanation:

From the question, we can see that the electron geometry is octahedral. Removing the two axial bonds to fit the description, and we have a square planar structure.

The problem is solved by balancing the reaction equation as shown below. The stoichiometry of the reaction is now applied in solving the question.

The balanced reaction equation is:

SiO2 + 6HF → H2[SiF6] + 2H2O

Using stoichiometry

The amount of silicon dioxide reacted = 12.5 g/60.08 g/mol = 0.21 mole

1 mole SiO2 yields 2 moles of H2O

0.21 mole of SiO2 yields 0.21 * 2/1 = 0.42 moles of H2O

The amount of HF reacted = 24.6 g/20.01 g/mol = 1.23 moles of HF

6 moles of HF yield 2 mole of H2O

1.23 moles of HF yields 2 * 1.23/6 = 0.41 moles of H2O

Hence HF is the limiting reactant.

Theoretical yield of H2O = 0.41 moles of H2O * 18 g/mol = 7.38 g

The percentage yield of the water is = actual yield/theoretical yield * 100

Hence;

% yield = 2.50 g/7.38 g * 100 = 33.9%

https://brainly.com/question/16378326

Answer:

The answer is

555.94g

Explanation:

To find the mass of a substance given it's density and volume we use the formula

Making mass the subject we have

mass = Density × volume

From the question

Density = 7.7 g/cm³

Volume = 72.2 cm³

Substitute the values into the above formula

That's

mass = 7.7 g/cm³ × 72.2 cm³

We have the final answer as

Hope this helps you

Answer:

Inactive ingredients are components of a drug product that do not increase or affect the therapeutic action of the active ingredient, which is usually the active drug. Inactive ingredients are added during the manufacturing process of pharmaceutical products such as tablets, capsules, suppositories, and injections

Answer:

it will dilute to its natrual state. so c

Explanation:

answer : increasing pressure

the amount of gas that can be dissolved in liquid water increase with the increase in pressure

Answer:

increasing pressure

Explanation:

The correct option for the process used to refine aluminum from its bauxite ore is option D.

D. Smelting

The reason why smelting is the correct choice is as follows;

Bauxite is the aluminum ore from which alumina, also known as aluminum

oxide, Al₂O₃, is produced. Bauxite is extracted from the topsoil regions of

some subtropical and tropical regions, and the Bayer process is primarily

then used to produce alumina from the bauxite.

Aluminum is produced from the alumina by an aluminum smelting process

known as the Hall—Heroult electrolytic process which involves the use of a

carbon anode and direct current to produce aluminum by reducing the

aluminum oxide

Learn more about smelting process here:

https://brainly.com/question/3444206

Explanation:

hope it will help you Mark me as a brilliant

[tex]\large{\textrm{{{\color{navy}{Answer....}}}}}[/tex]

\large{\textrm{{{\color{navy}{Answer....}}}}}

[tex]\Huge \mid \underline {\mathcal {{{\color{orange}{Answer...}}}}} \mid[/tex]

\Huge \mid \underline {\mathcal {{{\color{orange}{Answer...}}}}} \mid

[tex]\boxed{\sf Note:-}[/tex]

\boxed{\sf Note:-}

[tex]\begin{gathered} {\underline{\boxed{ \sf {\red{Answer}}}}}\end{gathered}[/tex]

\begin{gathered} {\underline{\boxed{ \sf {\red{Answer}}}}}\end{gathered}

[tex]\huge\red{\boxed{\orange{\mathcal{\overbrace{\underbrace{\fcolorbox{red}{pink}{\underline{\red{❥Answer࿐}}}}}}}}}[/tex]

\huge\red{\boxed{\orange{\mathcal{\overbrace{\underbrace{\fcolorbox{red}{pink}{\underline{\red{❥Answer࿐}}}}}}}}}

[tex]{\boxed{ \Huge{ \blue{ \mathcal{ \underline{ Answer}}}}}}[/tex]

{\boxed{ \Huge{ \blue{ \mathcal{ \underline{ Answer}}}}}}

[tex]\large\bf\purple{ \longrightarrow} \rm \:[/tex]

\large\bf\purple{ \longrightarrow} \rm \:

[tex]\Huge\bf\overbrace{\underline{ \underbrace{\blue \dag \orange{Answer \blue \dag}}}}[/tex]

\Huge\bf\overbrace{\underline{ \underbrace{\blue \dag \orange{Answer}}}} \blue\dag

[tex]\Huge\bf\underline{\underline{\red{Answer}}}[/tex]

\Huge\bf\underline{\underline{\red{Answer}}}

[tex]\Huge\bf { \underline{\mathbb {\green{ Answer }}}} [/tex]

\Huge\bf \underbrace{ \underline{\mathbb {\blue \dag\green{ Answer }}}} \underline\blue\dag

Answer:

answer of question 1 is

Explanation:

solids are denser than liquid and gases because solid particles are closely packed and do not have any empty spaces between their particels so when  solid will heated its particles will spread  and there will have more spaces between them  so a solid expand on heating.        

Answer:

37.5 grams

Explanation:

The percent yield shows how much of the reactant have been converted to product. The percent yield is the ratio of actual yield to theoretical yield multiplied by 100%. It is given by the formula:

%yield = Actual yield/ theoretical yield × 100%

Given that theoretical yield = 50 grams and the percent yield is 75%.

Using the formula and substituting:

75% = Actual yield/ 50 g × 100%

75% / 100% = Actual yield / 50 g

0.75 = Actual yield / 50 g

Actual yield = 0.75 × 50 g

Actual yield = 37.5 grams

Same molecular structure and same properties.

Molecular structure is three dimensional structure in which arrangement of atoms is placed.

The molecular structure of a compound determines the polarity and its reactivity.

The different states of matter solid, liquid and gas have different molecular structure and different properties from each other.

The molecular structure of a molecule will have same properties as of the entire molecule based on its state.

Learn more at https://brainly.com/question/24325752

Answer:

the location of atoms, groups, or ions relative to one another and the number, type, and location of covalent bonds

Answer:

ZnC4H10

Explanation:

The empirical formula of a compound refers to the formula that gives the simplest whole number ratio of each atoms of the elements in the compound.

The empirical formula is calculated thus:

The given percentages in the question represent the mass in grams of each element in the compound.

Zinc= 53%, C= 38.9%, H= 8.1% which represents 53g, 38.9g and 8.1g of each element respectively.

Molar Mass of Zn= 65.4 g/mol

Molar Mass of C= 12 g/mol

Molar Mass of H= 1 g/mol

Step 1: Divide the mass of each element by the molar mass given to convert to moles:

Zn= 53/65.4 = 0.81moles

C= 38.9/12 = 3.24moles

H= 8.1/1 = 8.1moles

Step 2: Divide each mole value by the smallest number of moles calculated, which is 0.81moles:

Zn= 0.81/0.81 = 1

C= 3.24/0.81 = 4

H= 8.1/0.81= 10

This is the mole ratio represented in the subscript of each element in the empirical formula:

That is, Zn (1) C (4) H (10)

Empirical formula= ZnC4H10

Answer:

Proteins

Explanation:

Amino acids act as monomers (a single unit used to form polymers) , the polymer will be a long chain of individual amino acids. An amino acid chain forms a protein. These proteins are also known as peptides.

Hope this helps and please mark as the brainliest.

Answer:

New volume of chlorine gas (V2) = 179 ml (Approx)

Explanation:

Given:

Volume of chlorine gas (V1) = 193 ml

Temperature of chlorine gas (T1) = 21°C = 21 + 273 = 294 k

New temperature of chlorine gas (T2) = 0°C = 0 + 273 = 273 k

Find:

New volume of chlorine gas (V2) = ?

Computation:

Using charle's law

V1 / T1 = V2 / T2

193 / 294 = V2 / 273

V2 = 179.21

New volume of chlorine gas (V2) = 179 ml (Approx)

Answer:

D. Zinc.

Explanation:

Galvanization is a metal-coating process which involves the application of a thin layer of zinc to an iron or steel, so as to prevent rusting or corrosion.

The zinc metal protects the iron from rusting by sealing the surface of the iron and thus, preventing weathering and oxidation.

Hence, if Mike wants to galvanize iron to protect it from rusting. The metal he should use is zinc (Zn) because a coating of zinc would protect the iron (Fe) by corroding first when exposed to moisture or the atmosphere.

Answer:

b

Explanation:

Answer:

The speed of the turtle is 9.41 centimeters per second.

Explanation:

Speed of small turtle = 566 furlong/fortnight

1 furlong = 20,116.8 cm

1 fortnight = 1,209,600 seconds

Speed of small turtle in centimeter per seconds:

The speed of the turtle is 9.41 centimeters per second.

Explanation:

Answer:

170 mL

Explanation:

The total volume to be reported should be 170 mL.

According to the significant rule in mathematical operations, final answers are usually reported to reflect the accuracy of the least accurate number.

In this case, the least accurate of all the volumes has zero significant digits after the decimal, hence, the final answer after the mathematical operation should also have no significant digits after the decimal.

           18 + 128.7 + 23.45 = 170.15

Therefore, the total volume to be reported when significant digits are taken into account would be 170 mL.