Answer: Only Tech B is correct.
Explanation:
First, tech A is wrong.
The circuits that can be compared with links in a chain are the series circuit, and it can be related to the links in a chain because if one of the elements breaks, the current can not flow furthermore (because the elements in the circuit are connected in series) while in a parallel circuit if one of the branches breaks, the current still can flow by other branches.
Also in a parallel circuit, the sum of the currents of each path is equal to the current that comes from the source, so Tech B is correct, the total current is equal to the sum of the currents flowing in each branch of the circuit.
A ceiling fan is spinning at 45 revolutions per minute when it is switched to a higher speed. It accelerates uniformly, and 2.0 seconds later it is spinning at 110 revolutions per minute. Through how many radians did it rotate during the transition of speeds
Answer:
θ = 16.2 rad
Explanation:
First we find the angular acceleration by using first equation of motion in angular form:
ωf = ωi + αt
where,
ωf =final angular speed = (110 rev/min)(2π rad/1 rev)(1 min/60 s) = 11.5 rad/s
ωi =initial angular speed = (45 rev/min)(2π rad/1 rev)(1 min/60 s) = 4.7 rad/s
α = angular acceleration = ?
t = time = 2 s
Therefore,
11.5 rad/s = 4.7 rad/s + α(2 s)
α = (6.8 rad/s)/(2 s)
α = 3.4 rad/s²
Now, we use 2nd equation of motion:
θ = ωi t + (1/2)αt²
where,
θ = rotation = ?
Therefore,
θ = (4.7 rad/s)(2 s) + (1/2)(3.4 rad/s²)(2 s)²
θ = 9.4 rad + 6.8 rad
θ = 16.2 rad
Two different galvanometers G1 and G2, have internal resistances r1and r2. The galvanometers G1 and G2 require the same current IC1=IC2 for a full-scale deflection of their pointers. These galvanometers G1 and G2 are used to build lab-made ammeters A1 and A2 . Both ammeters A1 and A2 have the same maximum scale reading Imax1=Imax2=Imax. To build A1 ,shunt resistor of resistance Rsh1is used and to build A2 , shunt resistor of resistance Rsh2 is used. The value of these shunt resistor resistances are such that: Rsh1=3Rsh2. What is the ratio oftheir internal resistances: r1:r2?
Answer:
there are 3 photos attached. so check
Explanation:
A simple pendulum takes 2.20 s to make one compete swing. If we now triple the length, how long will it take for one complete swing?
Answer:
Time taken for 1 swing = 3.81 second
Explanation:
Given:
Time taken for 1 swing = 2.20 Sec
Find:
Time taken for 1 swing , when triple the length(T2)
Computation:
Time taken for 1 swing = 2π[√l/g]
2.20 = 2π[√l/g].......Eq1
Time taken for 1 swing , when triple the length (3L)
Time taken for 1 swing = 2π[√3l/g].......Eq2
Squaring and dividing the eq(1) by (2)
4.84 / T2² = 1 / 3
T2 = 3.81 second
Time taken for 1 swing = 3.81 second
We can reasonably model a 75 W incandescent light bulb as a sphere 6.0 cm in diameter. Typically only about 5% of the energy goes to visible light; the rest goes largely to non-visible infrared radiation. (a) What is the visible light intensity at the surface of the bulb
Answer:
Visible light intensity at the surface of the bulb (I) = 331 W/m²
Explanation:
Given:
Energy = 75 W
Radius = 6 /2 = 3 cm = 3 × 10⁻² m
Energy goes to visible light = 5% = 0.05
Find:
Visible light intensity at the surface of the bulb (I)
Computation:
Visible light intensity at the surface of the bulb (I) = P / 4A
Visible light intensity at the surface of the bulb (I) = (0.05)(75) / 4π(3 × 10⁻²)²
Visible light intensity at the surface of the bulb (I) = 3.75 / 4π(9 × 10⁻⁴)
Visible light intensity at the surface of the bulb (I) = 331 W/m²
The location of a particle is measured with an uncertainty of 0.15 nm. One tries to simultaneously measure the velocity of this particle. What is the minimum uncertainty in the velocity measurement. The mass of the particle is 1.770×10-27 kg
Answer:
198 ms-1
Explanation:
According to the Heisenberg uncertainty principle; it is not possible to simultaneously measure the momentum and position of a particle with precision.
The uncertainty associated with each measurement is given by;
∆x∆p≥h/4π
Where;
∆x = uncertainty in the measurement of position
∆p = uncertainty in the measurement of momentum
h= Plank's constant
But ∆p= mΔv
And;
m= 1.770×10^-27 kg
∆x = 0.15 nm
Making ∆v the subject of the formula;
∆v≥h/m∆x4π
∆v≥ 6.6 ×10^-34/1.770×10^-27 × 1.5×10^-10 ×4×3.142
∆v≥198 ms-1
PLEASE HELP ANSWER FAST As the vibration of molecules decreases, the _____ of the substance decreases. 1.temperature 2.internal energy 3.kinetic energy 4.all of the above
Can anyone provide me the answer with explanation?
Answer:
the answer to your question us c honey
Answer:
C
Explanation:
This is so because different materials vary in resistance and conductance of current, heat. Metals are good conductors while none metals like rubber, plastic, glass etc are good insulators or resistors.
Question 2.
In the US, lengths are often measured in inches, feet, yards and miles. Let's do
some conversions. The definition of the inch is: 1 inch = 25.4 mm, exactly. A foot is
12 inches and a mile is 5280 ft, exactly. A centimetre is exactly 0.01 m or 10 mm.
Sammy is 5 feet and 5.3 inches tall.
a). What is Sammy's height in Inches? (answer to 3 significant figures)
(3)
b). What is Sammy's height in Feet? (answer to 3 significant figures)
what is Sammy's hight in feet according to this statement
Explanation:
1 inch = 25.4 mm
1 foot = 12 inches
1 mile = 5260 feet
1 cm = 0.01 m or 10 mm
Now Sammy's height is 5 feet and 5.3 inches.
(a) We need to find Sammy's height in inches.
Since, 1 foot = 12 inches
5 feet = 5 × 12 inches = 60 inches
Now, 5 feet and 5.3 inches = 60 inches + 5.3 inches = 65.3 inches
Sammy's height is 65.3 inches.
(b) We need to find Sammy's height in feet.
Since, 1 foot = 12 inches
[tex]1\ \text{inch}=\dfrac{1}{12}\ \text{feet}[/tex]
So,
[tex]5.3\ \text{inch}=\dfrac{5.3}{12}\ \text{feet}=0.4416\ \text{feet}[/tex]
5 feet and 5.3 inches = 5 feet + 0.4416 feet = 5.44 feet
Sammy's height is 5.44 feet.
16. If one body is positively charged and another body is negatively charged, free electrons tend to
O A. move from the negatively charged body to the positively charged body
O B. remain in the positively charged body
OC. move from the positively charged body to the negatively charged body
O D. remain in the negatively charged body
Answer:
Hey there!
The correct answer would be option A. If one body is positively charged and another body is negatively charged, free electrons tend to move from the negatively charged body to the positively charged body
Let me know if this helps :)
Calculate the equivalent of 30 degrees Celsius and 50 degrees Celsius on a Kelvin
[tex]\boxed{\sf 1°C=273K}[/tex]
Sol:-1
[tex]\\ \sf\longmapsto 30°C[/tex]
[tex]\\ \sf\longmapsto 273+30[/tex]
[tex]\\ \sf\longmapsto 303K[/tex]
Sol:-2
[tex]\\ \sf\longmapsto 50°C[/tex]
[tex]\\ \sf\longmapsto 50+273[/tex]
[tex]\\ \sf\longmapsto 323K[/tex]
A rabbit is moving in the positive x-direction at 2.70 m/s when it spots a predator and accelerates to a velocity of 13.3 m/s along the positive y-axis, all in 2.40 s. Determine the x-component and the y-component of the rabbit's acceleration.
Answer:
the answer is nearly 5.655 [tex]ms^{-2}[/tex]
Explanation:
Given,
[tex]v_{x}=2.7 ms^{-1}[/tex]
[tex]v_{y}=13.3 ms^{-1}[/tex]
[tex]t=2.4 s[/tex]
[tex]a_{x}=\frac{2.7}{2.4}=1.125 ms^{-2}[/tex] (as [tex]a=\frac{v-u}{t}[/tex])
[tex]a_{y}=\frac{13.3}{2.4}=5.542 ms^{-2}[/tex]
[tex]a=\sqrt{a_{x}^{2}+a_{y}^{2} }[/tex]
[tex]=\sqrt{1.125^{2}+5.542^{2} }[/tex]
[tex]=5.655 ms^{-2}[/tex]
hope you have understood this...
pls mark my answer as the brainliest
How do you know that a liquid exerts pressure?
Answer:
The pressure of water progressively increases as the depth of the water increases. The pressure increases as the depth of a point in a liquid increases. The walls of the vessel in which liquids are held are likewise subjected to pressure. The sideways pressure exerted by liquids increases as the liquid depth increases.
In 8,450 seconds, the number of radioactive nuclei decreases to 1/16 of the number present initially. What is the half-life (in s) of the material
Answer:
2113 secondsExplanation:
The general decay equation is given as [tex]N = N_0e^{-\lambda t} \\\\[/tex], then;
[tex]\dfrac{N}{N_0} = e^{-\lambda t} \\[/tex] where;
[tex]N/N_0[/tex] is the fraction of the radioactive substance present = 1/16
[tex]\lambda[/tex] is the decay constant
t is the time taken for decay to occur = 8,450s
Before we can find the half life of the material, we need to get the decay constant first.
Substituting the given values into the formula above, we will have;
[tex]\frac{1}{16} = e^{-\lambda(8450)} \\\\Taking\ ln\ of \both \ sides\\\\ln(\frac{1}{16} ) = ln(e^{-\lambda(8450)}) \\\\\\ln (\frac{1}{16} ) = -8450 \lambda\\\\\lambda = \frac{-2.7726}{-8450}\\ \\\lambda = 0.000328[/tex]
Half life f the material is expressed as [tex]t_{1/2} = \frac{0.693}{\lambda}[/tex]
[tex]t_{1/2} = \frac{0.693}{0.000328}[/tex]
[tex]t_{1/2} = 2,112.8 secs[/tex]
Hence, the half life of the material is approximately 2113 seconds
A sharp edged orifice with a 60 mm diameter opening in the vertical side of a large tank discharges under a head of 6 m. If the coefficient of contraction is 0.68 and the coefficient of velocity is 0.92, what is the discharge?
Answer:
The discharge rate is [tex]Q = 0.0192 \ m^3 /s[/tex]
Explanation:
From the question we are told that
The diameter is [tex]d = 60 \ mm = 0.06 \ m[/tex]
The head is [tex]h = 6 \ m[/tex]
The coefficient of contraction is [tex]Cc = 0.68[/tex]
The coefficient of velocity is [tex]Cv = 0.92[/tex]
The radius is mathematically evaluated as
[tex]r = \frac{d}{2}[/tex]
substituting values
[tex]r = \frac{ 0.06 }{2}[/tex]
[tex]r = 0.03 \ m[/tex]
The area is mathematically represented as
[tex]A = \pi r^2[/tex]
substituting values
[tex]A = 3.142 * (0.03)^2[/tex]
[tex]A = 0.00283 \ m^2[/tex]
The discharge rate is mathematically represented as
[tex]Q = Cv *Cc * A * \sqrt{ 2 * g * h}[/tex]
substituting values
[tex]Q = 0.68 * 0.92* 0.00283 * \sqrt{ 2 * 9.8 * 6}[/tex]
[tex]Q = 0.0192 \ m^3 /s[/tex]
An inductor is connected to the terminals of a battery that has an emf of 12.0 VV and negligible internal resistance. The current is 4.96 mAmA at 0.800 msms after the connection is completed. After a long time the current is 6.60 mAmA. Part A What is the resistance RR of the inductor
i
CHECK COMPLETE QUESTION BELOW
inductor is connected to the terminals of a battery that has an emf of 12.0 VV and negligible internal resistance. The current is 4.96 mAmA at 0.800 msms after the connection is completed. After a long time the current is 6.60 mAmA.
Part A)What is the resistance RR of the inductor
PART B) what is inductance L of the conductor
Answer:
A)R=1818.18 ohms
B)L=1.0446H
Explanation:
We were given inductor L with resistance R , there is a connection between the battery and the inductor with Emf of 12V, we can see that the circuit is equivalent to a simple RL circuit.
There is current of 4.96mA at 0.8ms, at the end of the connection the current increase to 6.60mA,
.
a)A)What is the resistance RR of the inductor?
The current flowing into RL circuit can be calculated using below expresion
i=ε/R[1-e⁻(R/L)t]
at t=∞ there is maximum current
i(max)= ε/R
Where ε emf of the battery
R is the resistance
R=ε/i(max)
= 12V/(6.60*10⁻³A)
R=1818.18 ohms
Therefore, the resistance R=1818.18 ohms
b)what is inductance L of the conductor?
i(t=0.80ms and 4.96mA
RT/L = ⁻ln[1- 1/t(max)]
Making L subject of formula we have
L=-RT/ln[1-i/i(max)]
If we substitute the values into the above expresion we have
L= -(1818.18 )*(8.0*10⁻⁴)/ln[1-4.96/6.60)]
L=1.0446H
Therefore, the inductor L=1.0446H
When an LRC series circuit is driven at resonance, which of the following statements about the circuit are correct? (There may be more than one correct choice.)a) The impedance of the circuit has its minimum value.b) The inductive reactance and the capacitive reactance are exactly equal to each other.c) The impedance of the circuit is zero.d) The inductive reactance and the capacitive reactance are both zero.e) The impedance of the circuit has its maximum value.
Answer:
Answers a) and b) should be marked as correct.
Explanation:
Recall that the resonance in an LRC circuit occurs when the current through the circuit is at its maximum, and such takes place when the impedance (Z) of the circuit reaches its maximum. This means that the impedance (see formula below) is at its minimum value:
[tex]Z=\sqrt{R^2+(\omega\,L-\frac{1}{\omega\,C})^2 }[/tex]
as per the impedance expression above, such happens when the term in parenthesis inside the root which contains the inductive reactance ([tex]\omega\,L[/tex]) and the capacitive reactance ([tex]1/\omega\,C[/tex]) have the same value.
Therefore, answers:
a) "The impedance of the circuit has its minimum value."
and
b) "The inductive reactance and the capacitive reactance are exactly equal to each other."
are correct answers.
(a) The impedance of the circuit has its minimum value.
(b) The inductive reactance and the capacitive reactance are exactly equal to each other
LRC series circuit consists of inductor, resistor and capacitor is series.
The impedance of the circuit is calculated as follows;
[tex]Z = \sqrt{R^2 + (X_C -X_L)^2}[/tex]
where;
R is the resistance[tex]X_C[/tex] is the capacitive reactance[tex]X_L[/tex] is the inductive reactanceThe impedance of the circuit is minimum when the capacitive reactance is equal to the inductive reactance.
[tex]X_C = X_L \\\\Z = \sqrt{R^2 \ + (0)^2} \\\\Z = R[/tex]
Learn more here:https://brainly.com/question/17330472
The double bond between two oxygen atoms (a molecule of oxygen air) has
two characteristics. What are they?
A. Four valence electrons are shared.
B. A metallic bond is formed.
C. Valence electrons are shared between oxygen atoms.
D. An ionic bond is formed.
Answer:
valance electrons are shared between oxygen atoms.. making them have eight in the outer most shells.
I hope this helps
In the 1980s, the term picowave was used to describe food irradiation in order to overcome public resistance by playing on the well-known safety of microwave radiation. Find the energy in MeV of a photon having a wavelength of a picometer.
Answer:
1.24Mev
Explanation:
Using
E= hc/lambda
= (6.62x10^-19) x(3x10^8m/s)/(1x10^-12) x 1.602x10^-9
= 1.24Mev
a student standing between two walls shouts once.he hears the first echo after 3 seconds and the next after 5 seconds. calculate the distance between the walls.
Explanation:
It took [tex]t_1 =1.5\:\text{s}[/tex] for the sound to reach the 1st wall and at the same time time, the same sound took [tex]t_2 = 2.5\:\text{s}[/tex] to reach the 2nd wall. Assuming that the sound travels at 343 m/s, then let [tex]x_1[/tex] be the distance of the person to the 1st wall and [tex]x_2[/tex] be the distance to the 2nd wall. So the distance between the walls X is
[tex]X = x_1 + x_2 = v_st_1 + v_st_2 = v_s(t_1 + t_2)[/tex]
[tex]\:\:\:\:\:= (343\:\text{m/s})(4.0\:\text{s}) = 1372\:\text{m}[/tex]
A soccer ball of mass 0.4 kg is moving horizontally with a speed of 20 m/s when it is kicked by a player. The kicking force is so large that the ball flies up at an angle of 30 degrees above the ground. The player however claims (s)he aimed her/his foot at a 40 degree angle above the ground. Calculate the average kicking force magnitude and the final speed of the ball, if you are given that the foot was in contact with the ball for one hundredth of a second.
Answer:
v_{f} = 74 m/s, F = 230 N
Explanation:
We can work on this exercise using the relationship between momentum and moment
I = ∫ F dt = Δp
bold indicates vectors
we can write this equations in its components
X axis
Fₓ t = m ( -v_{xo})
Y axis
t = m (v_{yf} - v_{yo})
in this case with the ball it travels horizontally v_{yo} = 0
Let's use trigonometry to write the final velocities and the force
sin 30 = v_{yf} / vf
cos 30 = v_{xf} / vf
v_{yf} = vf sin 30
v_{xf} = vf cos 30
sin40 = F_{y} / F
F_{y} = F sin 40
cos 40 = Fₓ / F
Fₓ = F cos 40
let's substitute
F cos 40 t = m ( cos 30 - vₓ₀)
F sin 40 t = m (v_{f} sin 30-0)
we have two equations and two unknowns, so the system can be solved
F cos 40 0.1 = 0.4 (v_{f} cos 30 - 20)
F sin 40 0.1 = 0.4 v_{f} sin 30
we clear fen the second equation and subtitles in the first
F = 4 sin30 /sin40 v_{f}
F = 3.111 v_{f}
(3,111 v_{f}) cos 40 = 4 v_{f} cos 30 - 80
v_{f} (3,111 cos 40 -4 cos30) = - 80
v_{f} (- 1.0812) = - 80
v_{f} = 73.99
v_{f} = 74 m/s
now we can calculate the force
F = 3.111 73.99
F = 230 N
Which was a major effect of Pope Leo III crowning Charlemagne emperor of the Romans ?
Answer:
The crowning of Charlemagne by Pope Leo III was significant in a number of ways. For Charlemagne, it was necessary because it encouraged to give him higher reliability. It gave him the rank of a dictator, giving him the only ruler in Europe west of the Byzantine emperor in Constantinople.
An aluminum rod 17.400 cm long at 20°C is heated to 100°C. What is its new length? Aluminum has a linear expansion coefficient of 25 × 10-6 C-1.
Answer:
the new length is 17.435cm
Explanation:
the new length is 17.435cm
pls give brainliest
The new length of aluminum rod is 17.435 cm.
The linear expansion coefficient is given as,
[tex]\alpha=\frac{L_{1}-L_{0}}{L_{0}(T_{1}-T_{0})}[/tex]
Given that, An aluminum rod 17.400 cm long at 20°C is heated to 100°C.
and linear expansion coefficient is [tex]25*10^{-6}C^{-1}[/tex]
Substitute, [tex]L_{0}=17.400cm,T_{1}=100,T_{0}=20,\alpha=25*10^{-6}C^{-1}[/tex]
[tex]25*10^{-6}C^{-1} =\frac{L_{1}-17.400}{17.400(100-20)}\\\\25*10^{-6}C^{-1} = \frac{L_{1}-17.400}{1392} \\\\L_{1}=[25*10^{-6}C^{-1} *1392}]+17.400\\\\L_{1}=17.435cm[/tex]
Hence, The new length of aluminum rod is 17.435 cm.
Learn more:
https://brainly.com/question/19495810
Mars Rover When the Mars rover was deployed on the surface of Mars in July 1997, radio signals took about 12 minmin to travel from Earth to the rover.
How far was Mars from Earth at that time?
Answer:
s = 2.16 x 10¹¹ m
Explanation:
Since, the waves travelling from Earth to the Mars rover are electromagnetic. Therefore, there speed must be equal to the speed of light. So, from the equation given below:
s = vt
where,
s = the distance between Earth and Mars = ?
v = speed of the wave = speed of light = 3 x 10⁸ m/s
t = time taken by the radio signals to reach the rover from Earth
t = (12 min)(60 s/1 min) = 720 s
Therefore,
s = (3 x 10⁸ m/s)(720 s)
s = 2.16 x 10¹¹ m
What do we call a substance in
which two or more elements are
chemically bonded
Answer:
A compound
Explanation:
A compound is a substance formed when two or more elements are chemically joined
Answer:
Compound
Explanation:
A compound is a substance derived from the chemical combination of two or more elements
e.g Water ;
= [tex]H_2O\\Hydrogen\:and\:Oxygen[/tex]
Salt ;
[tex]NaCl\\Sodium\:and\: Chlorine[/tex]
A) A 2-N force is applied to a spring, and there is displacement of 0.4 m. How much would the spring be displaced if a 5-N force was applied? (1 point)
1 m
4 m
0.08 m
2 m
Answer:
Option (A) : 1m
Explanation:
According to Hooke's law:
F (spring elastic force) =
k( spring const.) * x(displacement)
Case-1
2 N = k * 0.4m
k = 5
Case- 2
5 N = 5 * x
x ( displacement) = 1 m
The displacement of the spring if a 5-N force was applied is equal to 1m. Therefore, option (1) is correct.
What is Hooke's law?The strain and stress are proportional to each other, and this is called Hooke’s Law. Hooke’s law states that the strain is proportional to the stress applied within the elastic limit of the material.
When the materials are stretched, the atoms or molecules deform and when the stress is removed, they will return to their original state.
The mathematical equation for Hooke's law is as follows:
F = –kx
where F is the force, x is displacement, and k is the spring constant in N/m.
Given, F = 2N and x = 0.4m
F = -kx
2 N = - k (0.4m)
k = 5 N/m where the negative sign is omitted.
Now, the spring constant of the spring, k = 5 N/m and F = 5N
F = -kx
5 N = - (5 N/m)(x)
x = - 1m
Therefore, the displacement of the spring is 1 m.
Learn more about Hooke's law, here:
https://brainly.com/question/13348278
#SPJ2
An object is placed in a fluid and then released. Assume that the object either floats to the surface (settling so that the object is partly above and partly below the fluid surface) or sinks to the bottom. Answer the following question:
The magnitude of the buoyant force is equal to the weight of fluid displaced by the object. Under what circumstances is this statement true?
a. for every object submerged partially or completely in a fluid
b. only for an object that is floating
c. only for an object that is fully submerged and is sinking.
d. for no object submerged in a fluid
Answer:
Answer:
A. for every object submerged partially or completely in a fluid
Explanation:
This is following Archimedes principle which states that the upward buoyant force that is exerted on a body immersed in a fluid, whether FULLYor PARTIALLY submerged, is equal to the weight of the fluid that the body displaces.
Explanation:
The isotope (_90^234)Th has a half-life of 24days and decays to (_91^234)Pa. How long does it take for 90% of a sample of (_90^234)Th to decay to (_91^234)Pa?
Answer:
79.7 days
Explanation:
Half-life equation:
A = A₀ (½)^(t / T)
where A is the final amount,
A₀ is the initial amount,
t is the amount of time,
and T is the half life.
If 90% decays, then 10% is left.
A = A₀ (½)^(t / T)
0.1 A₀ = A₀ (½)^(t / 24)
0.1 = ½^(t / 24)
ln(0.1) = (t / 24) ln(0.5)
t ≈ 79.7 days
A 78.5-kg man floats in freshwater with 3.2% of his volume above water when his lungs are empty, and 4.85% of his volume above water when his lungs are full.
Required:
a. Calculate the volume of air he inhales - called his lung capacity - in liters.
b. Does this lung volume seem reasonable?
Answer:
A) V_air = 1.295 L
B) Volume is not reasonable
Explanation:
A) Let;
m be total mass of the man
m_p be the mass of the man that pulled out of the water because of the buoyant force that pulled out of the lung
m_3 be the mass above the water with the empty lung
m_5 be the mass above the water with full lung
F_b be the buoyant force due to the air in the lung
V_a be the volume of air inside man's lungs
w_p be the weight that the buoyant force opposes as a result of the air.
Now, we are given;
m = 78.5 kg
m_3 = 3.2% × 78.5 = 2.512 kg
m_5 = 4.85% × 78.5 = 3.80725 kg
Now, m_p = m_5 - m_3
m_p = 3.80725 - 2.512
m_p = 1.29525 kg
From archimedes principle, we have the formula for buoyant force as;
F_b = (m_displaced water)g = (ρ_water × V_air × g)
Where ρ_water is density of water = 1000 kg/m³
Thus;
F_b = w_p = 1.29525 × 9.81
F_b = 12.7064 N
As earlier said,
F_b = (ρ_water × V_air × g)
Thus;
V_air = F_b/(ρ_water × × g)
V_air = 12.7064/(1000 × 9.81)
V_air = 1.295 × 10^(-3) m³
We want to convert to litres;
1 m³ = 1000 L
Thus;
V_air = 1.295 × 10^(-3) × 1000
V_air = 1.295 L
B) From research, the average lung capacity of an adult human being is 6 litres of air.
Thus, the calculated lung volume is not reasonable
The car has a mass of 0·50 kg. The boy
now increases the speed of the car to 6·0
ms-1 . The total radial friction between
the car and the track has a maximum
value of 7.0 N. Show by calculation that
the car cannot continue to travel in the circular path.
Answer:
A solenoid is a type of electromagnet, the purpose of which is to generate a controlled magnetic field through a coil wound into a tightly packed helix. The coil can be arranged to produce a uniform magnetic field in a volume of space when an electric current is passed through it.
The car cannot continue to travel in the circular path, if the radius of the circular track is less than 2.57 m.
What is meant by centripetal force ?Centripetal force is described as the force applied to a body that is travelling in a circular motion and is pointed in the direction towards the center of the circular path.
Here,
Mass of the car, m = 0.5 kg
Velocity of the car, v = 6 m/s
Radial friction between the car and the track, f = 7 N
The necessary centripetal force for the car to execute the circular motion is provided by the maximum radial frictional force between the car and the track.
So, the condition that the car cannot continue to travel in the circular path is that the centripetal force required is greater than the maximum radial friction.
So,
mv²/r > f
0.5 x 6²/r > 7
Therefore, the radius of the circular track,
r < 18/7
r < 2.57 m
Hence,
The car cannot continue to travel in the circular path, if the radius of the circular track is less than 2.57 m.
To learn more about centripetal force, click:
https://brainly.com/question/14249440
#SPJ3
Trong thực nghiệm nhiễu xạ qua 1 khe hẹp, bề rộng khe là 2.10-5 m, màn quan sát đặt cách khe 0,5 m. Chiếu ánh sáng có bước sóng 480 nm xuyên qua khe và thấy có nền nhiễu xạ trên màn quan sát. Tính bề rộng của vân sáng liền kề vân sáng trung tâm.
Answer:
tyygggghgtyhyrdfgyyyhjjillbxsrfvgygvnjj
Explanation:
cffczhxucuxoyitxohvojcdivbjv ohxc