Tech A is correct because potentiometer type sensors use a variable resistance to create a variable voltage signal that corresponds to a specific condition.
What is a potentiometer?Potentiometer are variable resistors and passive device that can perform basic linear or rotary position function.
The potentiometer is a resistive device that uses voltage divider to produce a variable voltage output signal which is proportional to the physical position as a result of a specific condition.
Find out more on potentiometer at: https://brainly.com/question/4736557
Training credentials are used to confirm
O skill development
O electrical expertise
O age and educational background
O problem-solving ability
Training credentials are used to confirm an individual's: A. skill development.
What is a training credential?A training credential can be defined as a formally written and signed document that is typically issued by a training institute to a trainee after learning and gaining the requisite knowledge over a specific period of time.
This ultimately implies that, a training credential are designed and developed to confirm that a particular trainee has acquired and possesses a skill, knowledge, understanding, etc.
Read more on training credential here: https://brainly.com/question/8224944
If the voltage increases in a circuit, what happens to the current (amperes) if the resistance stays
the same?
A) Decreases
C) Increases
B) Remains the same
D) Cannot be determined
Answer:
b remains the same
Explanation:
voltage and amps have no connection
the electricity used to rin your clothes dryer is normally 220V 18-24A
the voltage in your car's battery is usually 12V 20-30A
see they are approximately the same amperage but very different voltage
How many 1/4" screws must be used to secure a connection of 8 inch duct?
3
5
4
6
Answer:
3
Explanation:
you multiply 1/4 x a = 8
a= 3
In a typical American building, most modern lighting systems must use what voltage?
A. S V
B. 48 V
C. 120 V
D. 250 V
Answer:
Typically, either 110-volt AC (110V) or 220-volt AC (220V) is used. Most countries use 50Hz (50 Hertz or 50 cycles per second) as their AC frequency. Only a handful use 60Hz. The standard in the United States is 120V and 60Hz AC electricity.
4. On wet roads, the chance of hydroplaning increases with the increase of speed.
True
False
Answer:
The answer to the question is True
On wet roads, the chance of hydroplaning increases with the increase of speed. Thus, the given statement is true.
During rainy weather, roads may become slippery and difficult to drive on. Slippery roads may also arise as a result of snow or ice. The fact that the road surface has less traction than normal is what makes it slippery. On slippery roads, it is recommended that drivers slow down to reduce the risk of skidding, sliding, or losing control of their cars, especially when taking turns.
Drivers should also increase their following distance and avoid abrupt braking or accelerating. Drivers should not drive faster than 25 mph on slippery roads, and they should not increase their speed to avoid hydroplaning. Instead, drivers should slow down.
Learn more about slippery roads:
brainly.com/question/1213174
#SPJ4
What are two ways you can see that there is a smaller load going to the base of the transistor?
Answer:
Transistor switches can be used to switch a low voltage DC device (e.g. LED’s) ON or OFF by using a transistor in its saturated or cut-off state. Cut-off RegionHere the operating conditions of the transistor are zero input base current ( IB ), zero output collector current ( IC ) and maximum collector voltage ( VCE ) which results in a large depletion layer and no current flowing through the device. Therefore the transistor is switched “Fully-OFF”.
2.Saturation Region
Here the transistor will be biased so that the maximum amount of base current is applied, resulting in maximum collector current resulting in the minimum collector emitter voltage drop which results in the depletion layer being as small as possible and maximum current flowing through the transistor. Therefore the transistor is switched “Fully-ON”.
Explanation:
hope it helps
1. Compare the following Software, surpac and datamine
Answer:
Discover GEOVIA Surpac, the world´s most popular geology and mine planning software.
logo
Micromine
Intuitive Mining Solutions Micromine 2020: Optimising underground mine planning The launch of MICROMINE’s latest version of leading exploration and 3D mine design solution, Micromine 2020 will see the introduction of new stope optimisation functiona…
What safety concerns must be addressed before
welding on a large assembly outside of a welding
booth?
Answer:
the clothing you wear, what's in the air (gases), surrounding and weather
What are some advantages of making electronic components like transistors increasingly smaller?
Answer:
Dr. Engelbart, who would later help develop the computer mouse and other personal computing technologies, theorized that as electronic circuits were made smaller, their components would get faster, require less power and become cheaper to produce — all at an accelerating pace
In a series circuit, resistance is the simple _____ of all resistors in the circuit.
A. sum
B. difference
C. average
D. product
Bernice has a string of lights decorating her room. One of the bulbs burns out, but the rest of the lights in the chain function normally. What kind of circuit is the light string using?
A. series
B. parallel
C. redundant
D. analog
in fort a shied pot is 50
Which of the following devices is not a networking device?
O Switch
O Hub
O Bridge
O None of these
Explanation:
I thought all of them are networking devices
In a dual zone climate control system, the ducts and airflow are split. Which of the following are used to control the temperatures
A. Evaporators
B. Heater cores
C. Compressors
D. Air mix doors
Answer:
D. Air mix doors
Explanation:
Air doorways are used to control the temperature in the dual-zone climate control system.
In filling bags of nitrogen fertilizer, it is desired to hold the average overfill to as low a value as possible. The lower specification limit is 22.00 kg (48.50 lb), the popu-lation mean weight of the bags is 22.73 kg (50.11 lb), and the population standard deviation is 0.80 kg (1.76 lb). What percentage of the bags contains less than 22 kg? If it is permissible for 5% of the bags to be below 22 kg, what would be the average weight? Assume a normal distribution.
18.14% of the bags contains less than 22 kg
What is z score?Z score is used to determine by how many standard deviations the raw score is above or below the mean. It is given by:
z = (raw score - mean) / standard deviation
Given that:
Mean = 22.73 kg, standard deviation = 0.80 kg
a) For <22:
z = (22 - 22.73)/0.8 = -0.91
P(z < -0.91) = 0.1814
18.14% of the bags contains less than 22 kg
Find out more on z score at: https://brainly.com/question/25638875
A half-wave rectifier circuit with a 1 kΩ load operates from a 120 V (rms value), 60 Hz household supply through a 10-to-1 step-down transformer. (For sine wave, V rms= V pk/√2 .) Assume the diode voltage is 0.7 V at forward bias. (a) What is the peak voltage of the rectified output? (b) For What fraction of the cycle does the diode conduct (calculate the percentage)?
Answer:
(a) 16.27 Vpk
(b) 48.7%
Explanation:
The transformer is assumed to be an ideal 10:1 voltage divider with no internal impedance. The diode is assumed to be modeled in the forward direction by a perfect 0.7 V voltage drop with no internal impedance. That means the frequency of the supply voltage is irrelevant.
__
(a)The peak voltage will be 0.7 V less than the transformer secondary peak voltage:
((120 V)√2)/10 -0.7 V ≈ 16.27 V
__
(b)The fraction of the amplitude for which the diode is non-conducting is ...
0.7/(12√2) ≈ 0.041248
The period of conduction is symmetrical about the peak of the waveform, so it is convenient to use the arccos function to find the (half) conduction angle:
arccos(0.041248) ≈ 87.64°
As a fraction of half the cycle, this is ...
conduction fraction ≈ 87.64°/180° ≈ 48.7%
i need the solution
Answer:
Isn't the answer written upside down in the sentence?
Explanation:
What does video compression do? Choose all that apply. reduces file size removes parts of a frame that change from one frame to the next removes parts of a frame that do not change from one frame to the next speeds uploading and downloading of video
Video compression is the process of encoding a video file in such a way that it consumes less space than the original file and is easier to transmit over the network/Internet.
Video compression is the process of encoding a video file in such a way that it consumes less space than the original file and is easier to transmit over the network or Internet.
What is a data frame?A data structure known as a "Data Frame" arranges data into a 2-dimensional table of rows and columns, much like a spreadsheet. Because they provide a flexible and user-friendly method of storing and interacting with data, a Data Frame is one of the most popular data structures used in contemporary data analytics.
The name and data type of each column is specified in a schema that is part of every Data Frame. Both common data types like StringType and IntegerType as well as Spark-specific data types like StructType can be found in Spark DataFrames. The Data Frame stores missing or incomplete values as null values.
Therefore, Video compression is the process of encoding a video file in such a way that it consumes less space than the original file and is easier to transmit over the network or Internet.
Learn more about Internet on:
https://brainly.com/question/13308791
#SPJ2
A specialist graphics company is investing in a new machine which enables it to make high-quality prints for its clients. Demand for these prints is forecast to be around 100,000 units in first year and 220,000 units in second year. The fixed cost of purchasing a machine is €200.000 and
maximum printing capacity of a machine 100.000 unit per year. The variable cost of printing is
€1 per unit. The company believes they will be able to charge €4 per unit for producing the prints.
What profit are they likely to make in the first and second years?
The profit that will be made for the first and second years will be $100,000 and $460,000.
How to calculate the profit?The profit of the graphics company for the first year will be:
= 4(100000) - [200000 + 100000]
= 400000 - 300000
= 100000
The profit for the second year will be:
= 4(220000) - (200000 + 220000)
= 880000 - 420000
= 460000
Learn more about profit on:
https://brainly.com/question/15969466
An electrician who must know how to disassemble and reassemble magnetic motor starters is an)
residential electrician
commercial electrician
O industrial electrician
o electrical maintenance electrician
The electrician described in the question is called an; D: electrical maintenance electrician
Who is an Electrician?An industrial maintenance/electrician is one who is tasked with the responsibility of installing and maintaining electrical systems in different industries.
Now, in this question we are told that the electrician disassemble and reassemble magnetic motor starters . This type of electricians are usually called Industrial/Electrical Maintenance Electricians.
Read more about Electrician at; https://brainly.com/question/14277272
The enforcement of OSHA standards is provided by federal and state
O master electricians
O lawmakers
O tax collectors
O safety inspectors
Answer:
Explanation:
Enforcing OSHA, Occupational Safety and Health Administration, standards is not a job for electricians, lawmakers or tax collectors. The right answer is safety inspectors.
I need to get answer for it
Answer:
A is the answer i guess
a is in a normal position and is letting him stand on the ground so I guess A is the answer
What does a restriction in the fuel return line cause?
Answer:
Carburetor flooding, engine stalling, and hard starting
Explanation:
If the fuel return hose becomes blocked or kinked it may cause the carburetor to flood from excessive fuel or pressure buildup.
Assess the consequences if not applying to CAO for your studies in advance
Some of the consequences of not applying to Central Applications Office (CAO) in advance include the following:
A payment of 60 Euros (€60) for late online applications.A payment of 90 Euros (€90) for late paper applications.You may miss out on admission to a higher institution.What is CAO?CAO is an abbreviation for Central Applications Office and it can be defined as an academic organization that is saddled with the responsibility of overseeing, managing, and processing undergraduate applications to colleges and universities in the Republic of Ireland.
Historically, the Central Applications Office (CAO) was established in 1976 and its primary mission is to centrally process undergraduate applications to Irish Higher Education Institutions (HEIs) such as colleges and universities, especially in a fair and efficient manner.
Although, it is essential and important for students to submit their applications to the Central Applications Office (CAO) in advance.
In conclusion, some of the consequences of not applying to Central Applications Office (CAO) in advance include the following:
A payment of 60 Euros (€60) for late online applications.A payment of 90 Euros (€90) for late paper applications.You may miss out on admission to a higher institution.Read more on CAO here: https://brainly.com/question/2919700
Which of the following statements is correct?
The thermostat controls the operation of the fan motor.
The 1-C contacts control the operation of the fan motor.
The L, M, and H terminals control the speed of the compressor.
Terminals 1 and L1 on the selector switch are electrically the same.
the Answer:
The thermostat controls the operation of the fan motor
Explanation:
Assuming this is a Household HVAC
The thermostat controls the operation of the fan motor, the operation of the heating elements, the compressor, and the flow of refrigerant through the A-coil
Assuming this is an Automotive application
The thermostat controls the operation of the fan motor and the flow of engine coolant
The __________________ refers to the main screen of the computer.
Answer:
Desktop
Explain:
Desktop refers to the main screen of the computer. It is the first screen you see after logging in. The desktop’s appearance can vary widely because it is highly customizable, but generally desktops will feature a large image, icons, and a taskbar(covered later on this page).
Compare and contrast mechanical properties of plastics, metals and ceramics.
Answer:
free badge
Explanation:
4. If a hot wire is shorted to ground, what will usually happen?
A. Relay will kick out.
B. Nothing will happen.
C. Fuse will burn open.
D. Capacitor energy storage limit will increase.
Answer:
nothing will happen
Explanation:
except for whatever that wire feeds will lose power
help support our cause by spreading this flag all over brainly
A 3 mm diameter and 5 m long electric wire is tightly wrapped with a 2 mm thick plastic cover whose thermal conductivity is k= 0.15 W/m°C. Electrical measurements indicates that a current of 10A and voltage drop of 8V along the wire. If the insulated wire is exposed to a medium at T∞= 30C with h= 12 W/m2°C, determine the temperature at the interface of the wire and the plastic cover in steady operation. Also, determine whether doubling the thickness of the plastic cover will increase or decrease this interface temperature.
Answer:
According to the problem the diameter of the wire , r1
The outer diameter after wrapping , r2 = 7mm
The thickness of the plastic cover , t
Length of the wire = I
The Thermal conductivity of cover = = k
Current pass through the wire = I
Due to current passing voltage dropped, is V
The temperature = T
Heat transfer coefficient = h
The rate at which the heat is generated in the wire,
q= VI = 8 * 10 =80 Watt
Now for calculating the resistance for each medium .
x1 = 1/hA2 = 1/2 x 2π x 0.0035 x 5 = 0.76 K/ W
x2 = ln r2/r1/2πkl = ln 0.0035/0.0015 /2π 0.15 x 5 = 0.179 K/W
Therefore the total resistance ,
R = x1+x2 = 0.76 +0.179 = 0.939 K/W
Now to calculate the temperature at the interface of the wire,
q= R(T - t)
=> 80 = 0.939(T -30- 273)
T = 378.12 K
Critical radius is r(critical)
r(critical) = K/h = 0.15/12 = 0.0125 m or 12.5 mm
The on-board computer controls the suspension system based on inputs from?
A. sensors.
B. solenoids.
C. air pressure.
D. hydraulic pressure.
The answer is A. Sensors