Answer:
Internet of things
Explanation:
This is a good example where the application of technology results are applied to human made things.
Internet of things (IOT), involves the application of one technology results–the internet, embedded into devices such as refrigerator, television etc so as to send and receive data (digital instructions). Such applications of technology results has revolutionized the way we use "human made things".
__is a mechanical force generated by a solid object moving through a fluid.
Answer:
Drag
Explanation:
Which element refers to musically depicting the emotion in the words of a musical piece?
A intellectual movement of humanism
B. word painting
C. balancing the usage of rhythm and tone color
D. combining lyrics and rhythm in a motet
Answer:
The correct option is;
B. Word painting
Explanation:
Word painting is the musical art of composition of music literally describing by reflection the action of the lyrics of the music. Word painting is also referred to as text painting or tone painting. Word painting is a technique commonly used in Renaissance music such as madrigals and the technique of word painting can also be found in church music such as in Hendel's Messiah
An example of word painting is where ascending set of musical notes will be paired with lyrics about increasing.
Answer: B. Word painting
Explanation:
HELPPPP. How many engineers are there in u.s?
There were about 1.6 million engineers employed in the United States in May 2015. Mechanical, civil, and industrial engineers together made up half of all employed engineers.
Answer:
There were about 1.6 million engineers employed in the United States in May 2015. Mechanical, civil, and industrial engineers together made up half of all employed engineers. The three smallest engineering occupations—agricultural engineers, marine engineers and naval architects, and mining and geological engineers—together made up about 1 percent of total engineer employment......
A ____ is marked by two sets of double yellow lines, with each set having a broken line on the inside, and a solid line on the outside. white arrows appear in this lane as well.
Answer:
center left-turn lane
Explanation:
A center left turn lane will be marked as described. The arrows, if present, generally indicate that left turns are permitted from the lane with these markings.
__
If the double yellow lines are solid, they are considered to be a "barrier" and are not to be crossed.
Answer:
center left-turn lane
Explanation:
Engineers are looking for a new material to build the body of an airplane. They agree that the material must be lightweight, but also strong and long-lasting. Above all, the material must maximize the safety of the passengers. Several engineers have developed some initial plans. Which stage of technological design is described in this passage
Answer:
Design a solution
Explanation:
In the design a solution stage, solutions and ideas to solve the problem or design of the product are generated and details of the problem solution or product design are developed
The generated ideas and details are put together to get a workable solution
Stages of technological design, includes
1) Problem identification
2) Design a solution or designing of a product
3) Design Implementation
4) Solution or product evaluation
Transaction are posted into ledger account from a) voucher b) journal book c) bank statement d) none of these
Answer:
b) journal book
Explanation:
A ledger is an account for recording balance sheet and income statement transaction entries like cash, investments, inventory and so on.
Before a transaction is posted into the ledger account after an accounting cycle, it is first written in the journal book, before it is then posted in the ledger account. The process of posting refers to the transferring of entries from the journal book to the ledger.
Two technicians are discussing solder wire repair. Technician A says that electrical tape can be used to cover the joint. Technician B says that heat shrink tubing can be used to cover the joint. Who is correct?
Answer:
8282777727e7e87e7e8e88282883
You should continuously work to enhance your skills and knowledge .
Answer:
Improve Your Writing
You may need to improve your ability to express yourself in writing.
To some degree, most organisations rely on the accurate transfer of information and that calls for the accurate use of language. When speaking, most people make multiple errors of grammar and vocabulary, and nobody seems to mind. But when you are doing business at work, then the business agreement is usually in the form of a written document; and that document has to be worded properly.
How would you rate your ability to express yourself properly in writing? Are you a good writer or do you lack knowledge of grammar, punctuation, logic and rhetoric?
If you are not as good at writing as you need to be, then study grammar, study punctuation, logic and rhetoric.
Start by buying a copy of a book called 'Rex Barks' by Phyllis Davenport.
This book is the gateway to grammar - and Phyllis is phenomenal.
Explanation:
Explain orthographic
and multi-view
projection
Answer:
Orthographic projection is a projection method to present three-dimensional shapes in two-dimensional format in which the projection lines are drawn to be orthogonal to the plane of projection, such that each view of the three-dimensional object is translated to a view of the orthographic projection and orthogonal to the view
A multiview projection is the representation of a three-dimensional projection by two or more two-dimensional views
Explanation:
The knob at the front of the miter saw about belt height is used to adjust the miter angle true or false
Answer:
True.
Explanation:
There are two basic saw angles, and the little nob on the front controls the one angle, and the one on the rear controls the other.
Where would a secret library be at a school???
6. Driving with parking lights only (in place of headlights) is against the law. A. True B. False
Answer:
B false it is illegal to only have got fog lights on though and bright headlights because it can distract other drivers going last and if the y are distracted then that will cause a collision
Hope this helps :)
Explanation:
Which of the following was likely the cause of the innovation of the car airbag?
Select one:
a. Power
b. Luck
c. Wealth
d. Basic necessity
Answer:
D.
Explanation:
Due to the rising amounts of fatalities, air bags were enforced in all cars as a key safety feature. Since then, they have saved countless lives.
4. Two technicians are discussing the evaporative emission monitor. Technician A says that serious monitor faults cause a blinking malfunction indicator lamp
(MIL) or even an engine shutdown. Technician B says that the engine computer will run the EVAP monitor when fuel level is within 15 to 25 percent and the TP
sensor position is between 9 and 10 percent. Who is correct?
O A. Neither Technician A nor B
O B. Both Technicians A and BN
O C. Technician A
OD. Technician B
Answer:
The correct option is;
Neither Technician A nor B
Explanation:
The evaporative emission monitor or Evaporaive Emission Control System EVAP System monitors enables the Power Control Module of the car to check fuel system leak integrity and the vapor consumption efficiency during engine combustion
It is a requirement of EPA on cars to check the emission of smug forming evaporates from cars
Serious monitor faults can cause the turning on of the check engine lights and the vehicle will not pass OBD II test, but it will not lead to engine shutdown
It runs when the engine is 15 to 85% full and the TP sensor is between 9% and 35%.
Therefore, the correct option is that neither Technician A nor B are correct.
Steam enters an adiabatic turbine at 8 MPa and 500 C with a mass flow rate of 3 kg/s andleaves at 30 kPa.The isentropic efficiency of the turbine is 0.90. Neglecting the kinetic energy change of the steam, determine (a) the tem-perature at the turbine exit and (b) the power output of theturbine
Answer:
(a) The exit temperature = 69.1°C
(b) The power output = 8.3 MW
Explanation:
(a) The enthalpy of steam at 8 MPa and 500°C is given (from online sources) as h₁ = 3399 kJ/kg
The exit temperature = The saturation temperature at 30 kPa = T₄ = 69.096 + 273.15 = 342.246 K
The exit temperature = 69.1°C
(b) The mass flow rate = 3 kg/s
The isentropic efficiency = 0.9 = (h₁ - h₂)/(h₁ - h₂[tex]_s[/tex])
s₁ = 6.727 kJ/kgK
h₂[tex]_s[/tex] = 289.229+ 2335.32* (6.8235 - 6.727 )/6.8235 = 322.26 kJ/kg
Therefore, h₂ = h₁ - (h₁ - h₂[tex]_s[/tex])*0.9
h₂ = 3399 - (3399 - 322.26 )*0.9 = 629.934 kJ/kg
The power output = [tex]\dot m[/tex](h₁ - h₂) = 3 *(3399 - 629.934) = 8307.2 kJ/s =
8.3 MW.
What is the value of current if a 50c charge flows in a conductor over a period of 5 seconds
If you think a hazard is serious, what is the best way to ensure that OSHA will
conduct a site inspection?
Help
Answer:
The best way to ensure that OSHA will conduct a site inspection is by the submission a signed (by a current employee or employee representative) Formal Written complaints following OSHA guidelines (which can be found in the Council of Safety and Health (COSH) website) which will enable the commencement of process for an on site inspection
As such it is advisable to go through the following procedure before, filing a complaint
1) Talk to your workers union about the hazard
2) If you do not belong to a union, talk to your co-workers
3) Inform your employer who has responsibility for on the job safety
4) Speak or have a meeting with OSHA so as to receive guidance before filing a complaint
Explanation:
If you think a hazard is serious, the best way to ensure that OSHA will conduct a site inspection is to file a complaint.
Hazard simply means a potential source of harm. It should be noted that hazards can have detrimental effect on the health of an individual.
If you think a hazard is serious, the best way to ensure that OSHA will conduct a site inspection is to file a complaint asking OSHA to inspect the workplace. In a situation whereby OSHA finds a serious hazard, it'll be kept confidential.
Read related link on:
https://brainly.com/question/25604446
You are driving a vehicle that has an automatic transmission. When you park on a hill, you
should
A: Set the parking brake first, before you shift the transmission into Park.
B: Shift the transmission into Park, and leave the parking brake off.
C: Set the parking brake, and shift the transmission into Neutral.
Answer:
The answer is A. Set the parking brake first, before you shift the transmission into Park.
An automatic gearbox is a multi-speed transmission system. The correct option is A.
What is the automatic transmission?An automatic gearbox is a multi-speed transmission system that is used in internal combustion engine-powered motor vehicles that do not require any driver input to change forward gears. Thus, making the process of shifting gears automated.
The correct way to park an automatic transmission vehicle is to set the parking brake first before you shift the transmission into Park. Therefore, the correct option is A.
Learn more about Automatic Transmission:
https://brainly.com/question/14093047
#SPJ2
what kind of line is used to indicate the supporting beam
Answer:horizontal
Explanation: because it is supporting it
If your accelerator pedal gets stuck, what is the first thing you should do?
If your accelerator gets stuck down, do the following: Shift to neutral. Apply the brakes. Keep your eyes on the road and look for a way out.If your accelerator gets stuck down, do the following:
Shift to neutral.
Apply the brakes.
Keep your eyes on the road and look for a way out.
Warn other drivers by blinking and flashing your hazard lights.
Try to drive the car safely off the road.
Turn off the ignition when you no longer need to change direction.
What is version control?
Answer:
version control are a category of software tool that help a software team manage changes to source code over time.
What do Engineering Systems achieve?
Answer:
Systems Engineering helps avoid omissions and invalid assumptions, helps to manage real world changing issues, and produce the most efficient, economic and robust solution.
Explanation:
3. An underground copper pipe is used to transport oil under a factory. It is very important that this pipe does not oxidize, so engineers use impressed current cathodic protection. a. Would zinc be an appropriate metal to use for cathodic protection? Why or why not? (4 points) b. Engineers attach a sacrificial anode to the copper pipe. To use impressed current cathodic protection, they must attach a battery between the cathode and anode. Which material should the positive side of the battery be attached to? Explain how you know. (4 points)
Answer:
a) Copper corrosion is prevented by an external current source that provides a condition around the copper that halts the rust through current cathodic protection
Due to the location of the pipeline, an material such as graphite, titanium, or niobium can be used which lasts longer that zinc can be used for longevity of the protection
b) The positive side of the output DC terminals are attached to the anodes such as graphite, while the negative terminals are connected to the copper pipe to be protected
Explanation:
Making the protected metal the cathode will make the metal be the source of electrons into the reaction taking place such that the release of the positive metal ions that results in disintegration takes place at the anode and as such the protected metal made the cathode, to which the negative terminal of the battery is attached is protected.
What is pseudocode ?
Answer:
Pseudocode is an artificial and informal language that helps programmers develop algorithms. Pseudocode is a "text-based" detail (algorithmic) design tool. The rules of Pseudocode are reasonably straightforward. All statements showing "dependency" are to be indented. These include while, do, for, if, switch.
The proper use of personal protective equipment helps prevent worplace injuries
4. Partnership programs between schools and the owners
of local automotive service shops that allow students to
earn school credit and a wage by working in commercial
repair shops are called
Answer:
Automotive Technology Program
Explanation:
Basically hiring students for hands on training to learn the basics of mechanics.
First Aid is used for all of the stated reason except:
O Protect Life
O Prevent injury
O Promote recovery
O Preserve life
prevent injury
Explanation:
one is already injured Soo there's no protection there
what is your favorite generation of the mustang?
Answer:
6TH AKA THE 2015-PRESENT
Explanation:
Answer:
I like them all except '74ish all the way up to '93.
Atmospheric air at 1 atm has a dry-bulb temperature of 20°C and a wet-bulb temperature of 15°C. Determine the dew point temperature
Answer:
The dew point temperature is 11.65°C
Explanation:
Dew point temperature formula is given as follows;
From the modified Apjohn equation, we have;
[tex]P_v = P'_v -\dfrac{1.8 \times p (t - t')}{2700}[/tex]
Which gives;
The saturation vapor pressure at 15°C = 1.705 kPa
[tex]P'_v[/tex] = 1.705 kPa
p = 101.325 kPa
[tex]P_v[/tex] = 1.705 - 1.8*101.325*(20 - 15)/2700 = 1.36725 kPa
The dew point temperature is the steam saturation temperature at 1.36725 kPa
= 6.9696 + (17.4953 - 6.9696)*(0.0136725 - 0.01)/(0.02 - 0.01) = 10.84°C by approximation calculation from steam tables and 284.8 K = 11.65°C from Wolfram Alpha.
Unless otherwise posted, the speed limit for cars in a residential area is
A: 25 miles
per
hour
B: 30 miles per hour.
C: 35 miles per hour.
Answer:
The answer is A (25 miles per hour).
Answer:
A. 25 miles
Explanation:
It is that low because people need to have enough time to stop a sudden stop light or pedestrian. Often times people hit people because they are wearing dark clothing or someone stepped out into a unprotected intersection.