The iron atoms in the prosthetic groups of the electron transport chain proteins can easily accept and release ____

Answer: 60.5%

Explanation:

When 30.0 g of carbon is heated with silicon dioxide, 28.2 g of carbon monoxide is produced.  60.5% is the percent yield of carbon monoxide for this reaction.

The % ratio of the theoretical yield to the actual yield is known as the percent yield. It is calculated as the theoretical yield times by 100% divided by the experimental yield. The percent yield equals 100% if the theoretical and actual yields are equal.

SiO₂(s) + 3C(s)→ SiC(s) + 2CO(g)​

moles of carbon =30.0 / 12=2.5moles

3 moles of carbon give 1 moles of SiC

1 mole of carbon will give 1/3 moles of SiC

2.5 mole of carbon will give (1/3)×2.5 =0.83 moles of SiC

mass of  SiC = 0.83× 40.09=33.27

percent yield = (actual yield/theoretical yield) x 100%

percent yield= (28.2 / 33.27)x 100%

percent yield = 60.5%

To know more about percent yield, here:

https://brainly.com/question/17042787

#SPJ2

Answer:

Limiting Reagent: NaHCO₃

Amount of NaCl: 69.6 g NaCl

Mass of Excess Reagent: 56.6 g HCl

Explanation:

To find the mass of NaCl, you need to (1) convert mass reactant to moles reactant (via molar mass), then (2) convert moles reactant to moles NaCl (via mole-to-mole ratio from equation coefficients), and then (3) convert moles NaCl to mass NaCl (via molar mass).

Molar Mass (NaHCO₃):

22.990 g/mol + 1.008 g/mol + 12.011 g/mol + 3(15.998 g/mol)

Molar Mass (NaHCO₃): 84.003 g/mol

Molar Mass (HCl): 1.008 g/mol + 35.453 g/mol

Molar Mass (HCl): 36.461 g/mol

Molar Mass (NaCl): 22.990 g/mol + 35.453 g/mol

Molar Mass (NaCl): 58.443 g/mol

100 g NaHCO₃            1 mole                  1 mole NaCl             58.443 g
------------------------  x  ------------------  x  ---------------------------  x  ----------------  =
                                   84.003 g            1 mole NaHCO₃            1 mole

=  69.6 g NaCl

100 g HCl            1 mole               1 mole NaCl          58.443 g
----------------  x  ------------------  x  -----------------------  x  ----------------  =
                           36.461 g             1 mole HCl              1 mole

=  160 g NaCl

Since NaHCO₃ results in the smaller amount of product, it is the limiting reagent. In other words, it is used up before the HCl has the chance to completely react. Therefore, the actual amount of NaCl produced is 69.6 grams.

To find the mass of the excess reagent, you need to calculate the amount of HCl actually used in the reaction. Then, you need to subtract that value from the total amount of HCl.

69.6 g NaCl             1 mole                1 mole HCl             36.461 g
---------------------  x  ------------------  x  -----------------------  x  ----------------  =
                                58.443 g            1 mole NaCl             1 mole

=  43.4 g HCl

Amount Given - Amount Reacted = Mass Excess

100 g HCl - 43.4 g HCl = 56.6 g HCl

Answer:

Can you be more clear with your question

[tex] \huge \quad\quad \underline{ \tt{{Answer}}}[/tex]

Rusting of iron is the most familiar example of corrosion. It is a process in which an iron reacts with atmospheric oxygen and moisture to form a reddish brown substance iron oxide, which is commonly known as rust.

[tex] \: \: \: \: \: \: \: \: \: \: \: \: [/tex]

[tex]\blue{ \star}:[/tex][tex] \sf4fe+ 3O_2+ XH_2O→ 2Fe_2O_3.XH_2O[/tex]

Answer:

Rust is an iron oxide, formed by iron and oxygen reacting in the catalytic presence of water or air moisture. Rusting is an oxidation reaction. This means it involves oxygen reacting with something (in this case, iron in the presence of moisture).

The chemical formula for rusting:

4Fe + 3O2 + 6H2O → 4Fe (OH)3

Hope this helps!

- profparis

Board instances involving eligibility or disciplinary issues that are addressed by a board-approved order public records and accessible on the BON's web page.

Board Position Statements are a way to give nurses guidance on topics that are important to the Board and relate to the safety of the public, but they do not have the legal force of law. In the context of the position statement's overall intent, each position statement is intended to offer direction. Board position statements are examined every year to determine their applicability and accuracy in light of current practice, the Nursing Practice Act, and Board regulations. In January 2022, the Board conducted its most recent evaluation.

It is possible to find a concise summary of the substance of the Position Statements, although it does not include all the specifics that are included in each Position Statement.

Learn more about BON's web page here:

https://brainly.com/question/16982080

#SPJ1

Answer: Structure and applications of poly(vinyl alcohol) hydrogels produced by repeated cycles of freezing and thawing.

Explanation:

Poly(vinyl alcohol) (PVA) is a polymer of great interest because of its many desirable characteristics specifically for various pharmaceutical and biomedical applications. The crystalline nature of PVA has been of specific interest particularly for physically cross-linked hydrogels prepared by repeated cycles of freezing and thawing. This review includes details on the structure and properties of PVA, the synthesis of its hydrogels, the crystallization of PVA, as well as its applications. An analysis of previous work in the development of freezing and thawing processes is presented focusing on the implications of such materials for a variety of applications. PVA blends that have been developed with enhanced properties for specific applications will also be discussed briefly. Finally, the future directions involving the further development of freeze/thawed PVA hydrogels are addressed.

To learn more about poly(vinyl alcohol) hydrogels from the given link

https://brainly.com/question/15186868

#SPJ4

Radioactive waste from fusion reactions becomes less hazardous much sooner than waste from fission reactions, nuclear fusion is much safer than fission because it leaves no radioactive waste behind.

Both processes are natural, but they can also be carried out in a lab. While fusion involves the "crushing" of two atoms to form a single atom of a new element, fission involves the splitting of an atomic nucleus.

We can conclude from this information that radioactive waste from fusion reactions becomes less hazardous much sooner than waste from fission reactions, and nuclear fusion is much safer than fission because it produces no radioactive waste.

It takes a lot of energy to combine protons so that nuclear forces can overcome electrostatic repulsion. The energy released during the fission process is much greater than the energy released during other chemical reactions.

Learn more about nuclear fusion in :

https://brainly.com/question/12701636

#SPJ4

Answer: The radioactive waste from fusion reactions becomes less hazardous much sooner than the waste from fission reactions.

Explanation:

The equilibrium constant K is 17.78 × 10²⁷ at 255 K for the following reaction under acidic conditions.

4H⁺ (aq) + MnO₂ (s) + 2Fe⁺² (aq) → Mn⁺² (aq) + 2Fe⁺³ (aq) + 2H₂O (l)

The relation between standard electrode potential and equilibrium constant is as follows:

G = -2.303 RT log K

-nFE° = -2.303 RT logK

[tex]\log K = \frac{nFE^{\circ}_{\text{cell}}}{2.303RT}[/tex]

Here,

n = 2

F = 96500

[tex]E^{\circ}_{\text{Cell}} = E^{\circ}_{\text{reduced}} - E^{\circ}_{\text{oxidized}}[/tex]

        = 0.77 V - 1.51 V

        = -0.74 V

R = 8.314 J/K mole

T = 255 K

Now put the values in above formula we get

[tex]\log K = \frac{nFE^{\circ}_{\text{cell}}}{2.303RT}[/tex]  

[tex]\log K = \frac{2 \times 96500 \times (-0.74)}{2.303 \times 8.314\ \text{J/K mole} \times 255\ K}[/tex]  

[tex]\log K = \frac{-142820}{4882.521}[/tex]

log K = 29.25

K = 17.78 × 10²⁷

The equilibrium constant K is 17.78 × 10²⁷ at 255 K for the following reaction under acidic conditions.

4H⁺ (aq) + MnO₂ (s) + 2Fe⁺² (aq) → Mn⁺² (aq) + 2Fe⁺³ (aq) + 2H₂O (l)

Learn more about the Gibbs free energy here: https://brainly.com/question/17310317

#SPJ4

Disclaimer: The question was given incomplete on the portal. Here is the complete question.

Question: Use the appropriate standard reduction potentials below to determine the equilibrium constant at 255 K for the following reaction under acidic conditions.

4H⁺ (aq) + MnO₂ (s) + 2Fe⁺² (aq) → Mn⁺² (aq) + 2Fe⁺³ (aq) + 2H₂O (l)

The equation that relates equilibrium constants with cell potentials is

[tex]\log K = \frac{nFE^{\circ}_{\text{cell}}}{2.303RT}[/tex]

Use this formula, along with the information in the appendix of your book to solve for K.  

The concentration of acetic acid:

The concentration of the acetic acid before titration is 0.128 M

What is titration?

Titration is a quantitative analytical procedure that works by allowing a known analyte to gradually react with a titrant until an endpoint is reached.

Titration for weak acid and strong base:

Moles of acetic acid =  moles of NaOH

Given:

Concentration of NaOH = 0.1067 M

Volume of NaOH = 30.07 ml = 0.03007 L

Calculation:

So, by using the formula, Concentration = Moles/Volume

Moles of NaOH = concentration x volume = 0.1067 x 0.03007 = 0.0032

Therefore, the moles of acetic acid  = 0.0032 mole

Now, using the formula again for determining the concentration of acetic acid, we get,

Concentration = Moles/Volume

Concentration of acetic acid =  0.0032/0.025 = 0.128M

Learn more about titration here,

https://brainly.com/question/2728613

#SPJ4

The name of the amide bond between amino acids will be peptide bond.

Peptide bonds are amide-type covalent bonds that form bonds that connect two adjacent alpha-amino acids throughout peptide or protein chains, starting at C1 of one as well as [tex]N_{2}[/tex] of another.

The substances are known as amino acids, or the "building blocks of proteins," and play a variety of vital functions in the human body. Humans require them for essential functions like producing hormones, neurotransmitters, even proteins. In meals high in protein like meat, fish, as well as soybeans, amino acids could be concentrated.

Therefore, the name of the amide bond between amino acids will be peptide bond.

Hence, the correct answer will be option (e)

To know more about peptide bond

https://brainly.com/question/15078143

#SPJ4

Answer:

C. It is hard to recreate the extremely high temperatures and pressures found inside stars.

Explanation:

Nuclear fusion occurs when atomic nuclei are forcefully combined to create a new atomic nuclei or subatomic particles. In nature, this process takes place in our Sun and other stars. Within stars, extremely high temperatures and pressures are achieved and cause nuclear fusion to occur. Humans have not yet been successful in recreating the environment necessary to mimic this process.

The amount of space that matter occupies is called its volume. Solids, liquids, and gases all have volume.

Hard-boiled eggs are made by placing eggs in boiling water until their whites and yolks solidify. Hard-boiling an egg take longer at high altitude than at sea level because the high altitude lowers the boiling point of the egg.

Hard-boiling an egg take longer at high altitude than at sea level because the high altitude lowers the boiling point of the egg. It takes longer for the water to reach 100°C.

Hard boiling egg is a chemical change because the egg cannot back into its original form.

Chemical change are those changes in which substance changes chemical composition. These changes are permanent changes.

Thus from the above conclusion we can say that Hard-boiled eggs are made by placing eggs in boiling water until their whites and yolks solidify. Hard-boiling an egg take longer at high altitude than at sea level because the high altitude lowers the boiling point of the egg.

Learn more about the Chemical Change here: https://brainly.com/question/1222323

#SPJ4

Answer:

(a) Gas pressure ---------------------> (iii) force per unit area

(b) One mole of substance -------------------> (i) 6.02 x 10²³

(c) One mole of any gas ----------------------> (ii) 22.4 dm³ at STP

(d) Avogadro's number -----------------> (iv) 6.02 x 10²³ particles

Answer:

1.28 x 10⁻¹⁵ eV

Explanation:

To find the energy, you can use the photon energy equation:

E = hc / λ

In this equation,

-----> E = energy (eV)

-----> h = Plank's Constant (4.136 x 10⁻¹⁵ eV*s)

-----> c = speed of light (3.00 x 10⁸ m/s)

-----> λ = wavelength (m)

You can find the energy of the photon by plugging the given values into the equation and solving.

E = hc / λ

E = (4.136 x 10⁻¹⁵ eV*s)(3.00 x 10⁸ m/s) / 9.7 x 10⁸ m

E = 1.2408 x 10⁻⁶ / 9.7 x 10⁸ m

E = 1.28 x 10⁻¹⁵ eV

The water cycle will be discussed here.

This is defined as the continuous manner in which water is moved within the earth and the atmosphere.'

The water cycle comprises of steps such as:

Humans however disrupt water cycle through the damming of rivers and deforestation.

Read more about Water cycle here https://brainly.com/question/25796102

#SPJ1

Group C : 32.1°C , 31.9°C, 31.8°C makes the most precise measurements of the object's temperature.

Precision :The degree of similarity between study results of the experiment if they were performed today under comparable conditions.

If repeated measurements yield similar results, the measurement is considered precise (or repeated surveys).

It means how closely all the results are related .

Therefore, there should be less difference between the measurements of all the results.

In option (a) , there is a difference of 1° in all the results.

In option (b) , there is a difference of approximately 1.5° in all the results.

In option (c), there is only 0.2° difference in all the results.

In option (d) , there is a difference of 3° in all the results.

Therefore, All the option of group (c) are closely related.

Hence, Group (c) 32.1°C, 31.9°C, 31.8°C makes the most precise

measurements of the object's temperature.

Learn more about Precision & Accuracy here https://brainly.com/question/5792909

#SPJ1

molar mass of sucrose is 342 g/mol.

Concept:

It is the substance's molecular mass. M is the abbreviation for it, and g/mol is the standard unit for measuring molar mass.

Given:

Sucrose (C12H22O11)

Find:

Calculate the molar mass of the powdered fruit drink mix, made from sucrose (C12H22O11).

Solution:

The molar mass of carbon = 12 g/mol

The molar mass of hydrogen = 1 g/mol

The molar mass of oxygen = 16 g/mol

Thus, the molar mass of sucrose can be calculated as:

C12H22O11 12 C + 22 H + 11 O

= 12 12 g/mol + 22 * 1 g/mol + 11 * 16 g/mol

= 144 g/mol + 22 g/mol + 176 g/mol = 342 g/mol

Therefore, the molar mass of sucrose is 342 g/mol.

Hence, the molar mass of the powdered fruit drink mix, made from sucrose

Hence, the molar mass of the powdered fruit drink mix, made from sucrose(C12H22O11) is 342 g/mol.

Learn more about Molar mass here:

https://brainly.com/question/24236159

#SPJ4

Answer:

[tex]K2O[/tex]

Explanation:

If you use a melting point periodic table there is a listing of all the elements and their melting point.

Potassium (K) has a melting point of 63.25 degrees Celsius and oxygen (O) has a melting point of -218 degrees Celsius. Therefore, if you add those two values up

[tex](63.25x2)+-218 = -91.5 Degrees Celsius[/tex]

All the other compounds do not reach negatives.

Answer:

The answer to your question is True

Explanation:

CH2O is a polar molecule. It has three polar bonds that are arranged asymmetrically, thus allowing their dipole moments to add up and give the molecule an overall dipole moment. CH2O has a central carbon atom that forms two single bonds with the two hydrogen atoms and a double bond with the oxygen atom.

I hope this helps and have a good day!

The formula of the compound will be  [tex]Mg_2Ga[/tex]

The compound contains magnesium and gallium. The symbol and magnesium and gallium is Mg and Ga respectively.

Magnesium content is 41.1%

Gallium content is 58.9%

First, find the number of moles of each element in the compound by dividing their percentage compositions with their respective molar weights.

Mg = 41.1/24.505 =1.6772

Ga = 58.9/69.723 = 0.8448

Next, divide each number of moles by the smallest number of moles.

Mg = 1.6772/0.8448 = 2

Ga = 0.8448/0.8448 = 1

Thus, the formula of the compound is [tex]Mg_2Ga[/tex]

More on empirical formula can be found here: https://brainly.com/question/14044066

#SPJ1

0.723 is the [H ] (molarity) before any base is added.

the balanced equation for the acid-base reaction is

KOH + HClO₄ ---> KClO₄ + H₂O

stoichiometry of KOH to HClO₄ is 1:1

The number of HClO₄ moles - 0.723 M / 1000 mL/L x 25.0 mL = 0.0181 mol

Number of KOH moles - 0.27 M/ 1000 mL/L x 80.0 mL = 0.0216 mol

KOH is a strong acid and HClO₄ is a strong base therefore complete dissociation takes place.

the acid reacts with base in a 1:1 molar ratio, there's excess base remaining.

excess OH⁻ ions - 0.0216 - 0.0181 = 0.0035 mol

concentration is calculated as the number of moles/volume

volume of solution - 25.0 + 80.0 = 105.0 mL

[OH⁻] = 0.0035 mol / 0.105 L = 0.033 M

pOH = -log [OH⁻]

pOH = -log(0.033 M)

pOH = 1.48

pH can be calculated by knowing the pOH

pH + pOH = 14

pH = 14 - 1.48 = 12.52

pH = -log [H₃O⁺]

[H₃O⁺] = antilog(-12.52)

[H₃O⁺]  = 3.0 x 10⁻¹³ M

0.723 is the [H ] (molarity) before any base is added.

To know more about molarity refer to:  https://brainly.com/question/8732513

#SPJ1

Excited state configuration are 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹ , [Kr] 5s¹ 4d¹⁰ , [He] 2s¹ 2p⁵and  Ground state configuration are [Ne] 3s²3p³ ,  [Ar] 4s¹ 3d⁶.

The electronic configuration of an element describe the symbolic notation that how electrons are distributed in its atomic orbitals.

The ground state electronic configuration of an element describe the arrangement of an atom at its lowest possible energy state.

Cr has the ground state electronic configuration [Ar] 4s¹ 3d⁶.

Ag has the excited state electronic configuration [Kr] 5s¹ 4d¹⁰ .

Thus from the above conclusion we can say that Excited state configuration are 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹ , [Kr] 5s¹ 4d¹⁰ , [He] 2s¹ 2p⁵and  Ground state configuration are [Ne] 3s²3p³ ,  [Ar] 4s¹ 3d⁶.

Learn more about the Electronic configuration here: https://brainly.com/question/26084288

#SPJ4

Disclaimer: The question was given incomplete on the portal. Here is the complete question.

Question: Classify the electron configurations of neutral atoms based on whether they represent an excited state configuration or a ground state configuration.

Excited State                       Ground State

Answer Bank:

1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹

[Ar] 4s¹ 3d⁶

[Ne] 3s²3p³

[He] 2s¹ 2p⁵

[Kr] 5s¹ 4d¹⁰

(1.) Which neutral atom has the excited or ground state electronic configuration, [Ar] 4s¹ 3d⁶ ? Enter the name of the element.

(2.) Which neutral atom has the excited or ground state electronic configuration, [Kr] 5s¹ 4d¹⁰ ? Enter the name of the element

The correct balanced equation for the dissociation of calcium chloride is [tex]CaCl_2 (s) --- > Ca^{2+} (aq) + 2Cl^- (aq)[/tex]. Option D.

Dissociation in chemistry refers to the process whereby a compound reversibly breaks down to its constituent elements (usually in ion forms) within a solution.

The constituent elements in calcium chloride are calcium and chlorine. Calcium ion is written as [tex]Ca^2^+[/tex] while chlorine ion is written as [tex]Cl^-[/tex]. Calcium chloride itself is written as [tex]CaCl_2[/tex].

Thus, the equation of dissociation of calcium chloride in water can be summarized as:

[tex]CaCl_2 (s) --- > Ca^{2+} (aq) + 2Cl^- (aq)[/tex]

More on dissociation can be found here: https://brainly.com/question/20430933

#SPJ1

Answer:

D.) The attraction between the delocalized electrons and the metal's cations

Explanation:

Metallic bonds form between free-floating valence electrons (delocalized electrons) and positively charged metal ions (cations). The negative charge from the electrons and the positive charge from the ions are what form the attraction.

The volume measured using such a cylinder will be reported to the nearest 10th mL.

10 mL graduated cylinders are always read to the nearest two decimal places.

100 mL graduated cylinders are always read to the nearest 1 decimal place. The nearest 1 decimal place is the same thing as the nearest 10th.

Thus, a reading made using a 100mL increment graduated cylinder would be reported to the nearest 10th mL.

More on cylinder graduation can be found here: https://brainly.com/question/14427988

#SPJ1

Insulating materials are composed of atoms with tightly bound outer electrons.

The material that stop the flow of Sound, Heat and Electricity by them are called Insulating Material. Insulator are the materials whose atoms have tightly bound outer electrons because electrons are not free to shared by neighboring atoms.

Examples: Glass, Plastic, Rubber, Air and Wood.

There are mainly three types of Insulating Material:

Thus from the above conclusion we can say that Insulating materials are composed of atoms with tightly bound outer electrons.

Learn more about the Insulating Material here: https://brainly.com/question/27813161

#SPJ1

Potassium can be a component of the cream.

An element's presence can be determined using a flame test. The potassium in cream of tartar is what gives it its white-purple color.

Low ionization enthalpy elements allow the flame to display color. Due to low ionization enthalpy, when an element is heated, its valence electrons are quickly excited to higher orbits and emit light as they return to their original orbit. Salts of potassium emit a white-purple color when ignited. The cream of tartar's chemical formula is KC₄H₅O₆.

Learn more about flame test here:

https://brainly.com/question/22043426

#SPJ4

Ionization of Gold:

The maximum wavelength of light that will ionize gold is 134.5 x 10 ⁻⁴m  

Calculation:

1 mole requires = 890.1kJ = 8.901×10⁵ J

The energy needed to ionize a single atom = Divide it by Avogadro's number (6.0221409×10²³)

Thus, 1 atom requires = 8.901×10⁵ J / 6.0221409×10²³ J

                                    =  1.478×10⁻¹⁸ J

The Energy of photon = E = hc/λ   where,

h =  Planck constant (6.626070040Ă—10â’34 Js)

λ =  the wavelength

c = the speed of light

Putting the values:

E = 1.478×10⁻¹⁸ J

h =6.63x10⁻³⁴ Js

c = 3 x 10⁸ m/s

λ = ?

λ = hc/E

  = (6.63x10⁻³⁴ x 3 x 10⁸ ) / 1.478×10⁻¹⁸

  = 134.5 x 10 ⁻⁴m  

Learn more about the ionization energy here,

https://brainly.com/question/6685711

#SPJ4  

Answer:

Point B

Explanation:

From 0 - 7 on the pH scale, substances are said to be acidic. At 7, the substance is said to be neutral. From 7 - 14, substances are basic.

Lime is a basic substance. Therefore, when it is added to the soil, one should expect that the soil becomes more basic. On the graph, this should be represented by the line increasing in pH. As such, the point at which lime was added was most likely Point B.