Answer:
8.2x10^2 Joules
Explanation:
Assuming that GPE means potential energy of the parachutist, and he/she is doing this on Earth, we can find their potential energy, (PE) with the equation:
PE = mgh, where m is the mass of the parachutist in kilograms, g is the acceleration due to gravity [9.8 m/s2 for Earth (near surface)] and h is the height in meters.
m = 9.8 m/s^2
h = 12,000 meters (12 km)
m = 70 kg
PE = (70kg)(9.8 m/s^2)(12,000 m)
PE = 823,200 kg*m^2/s^2
PE = 8.2 x 10^2 kg*m^2/s^2
(1 kg*m^2/s^2) is the SI equivalent to a Joule.
The potential energy is 8.2x10^2 Joules
a cylindrical rod has equal and opposite forces applied parallel to the surface of its circular ends. the forces are directed toward the center of the rod. what type of stress is this rod subject to?
The force that results in a material's deformation and subsequent reduction in volume is known as compression stress.
What exactly are tensile and compressive stress?Tensile Stress: When a body is subjected to an equal force that is applied perpendicular to its cross-sectional area, it deforms. Definition of Compressive Stress: The solid is compressed by the application of an external force. The body, which is known for compressive stress, responds by producing the restoring force.The force that results in a material's deformation and subsequent reduction in volume is known as compression stress. A material shrinks in volume as a result of the stress it experiences. The failure of the material is caused by high compressive stress.To learn more about compression refer to:
https://brainly.com/question/4024127
#SPJ4
What percent of the world’s earthquakes occur around the pacific rim/ring of fire?.
The percent of the world’s earthquakes occurring around the pacific rim/ring of fire will be 90%.
The Ring of Fire is home to more than 450 volcanoes or 75% of all volcanoes on Earth. The majority of earthquakes that occur on Earth, including the most intense and spectacular seismic occurrences, ever recorded, happen along its course. The region of earthquakes encircling the Pacific Ocean is known as the "Ring of Fire," also known as the Circum-Pacific belt; it is where 90% of all earthquakes on earth take place.
The extensive movement of tectonic plates in the region is the reason for the high frequency of earthquakes and volcanoes in the Ring of Fire. Plates collide along convergent boundaries known as subduction zones around a large portion of the Ring of Fire. In other words, the plate above pushes down or subducts, the plate below.
Learn to know more about Earthquake on
https://brainly.com/question/20409140
#SPJ4
a secret agent has just stolen the ultimate top secret codes from a terrorist organization. their mission is to throw the information disk off the san francisco bridge onto a small ship that is waiting stationary. the agent gets to the edge of the bridge and sees the ship. using an angle up towards the sky, they throw the disk... which falls short and goes into the water. luckily the secret agent made a backup copy. if they throw it with the same velocity as before, should they increase the angle of the throw to make it to the stationary ship? (you can consider no external factors are present such as wind or clouds.)
Using the range of projectile motion principle, it is determined that the angle at which the information disc is launched must be increased in order for it to reach the stationary spacecraft.
This expression makes it evident that if they want to extend the range of an information disc thrown at constant speed of spacecraft , they must also extend the angle at which they toss it. The horizontal distance that a projectile motion covers is known as its range. This qualifies as a projectile motion scenario for spacecraft.
An object in the air only experiences projectile motion when it is affected by gravity. A projectile motion that is fired into the air close to the surface of the Earth and travels along a curved path, or more precisely a parabolic path, while being pulled downward by gravity, assuming that air resistance is minimal.
According to the formula of Range of projectile motion,
R = U^2*sin2[tex]\alpha[/tex]/g
therefore R is directly proportional to sin2[tex]\alpha[/tex]
Learn more about projectile motion here
https://brainly.com/question/11049671
#SPJ4
which of the following is an advantage that liquid water has as a biological solvent compared to other alternatives?
an advantage that liquid water has as a biological solvent compared to other alternatives IS, when it freezes it becomes less dense. it is a liquid over a wide temperature range and remains liquid at higher temperatures. It is able to dissolve many things
WHAT IS A BIOLOGICAL SOLVENT?A solvent is a molecule that has the ability to dissolve other molecules, known as solutes. A solvent can be solid, liquid or gas. The molecules of the solvent work to put the solute molecules apart. Eventually, the molecules of solute become evenly distributed in throughout the solvent. This homogenous mixture is perfectly even, and cannot be separated physically. Heat or another chemical process must be applied to the solution to separate the solvent and solute.
Molecules in general have two classes, polar and nonpolar. Polar molecules have separated electrical charges on different sides of the molecule. Nonpolar molecules, while they can fluctuate in charge, do not carry a static charge. Both es of molecules can act as solvents, as described below.
learn more about biological solvent:https://brainly.com/question/5010130
#SPJ4
at the instant you pass through the equilibrium position of the spring, you drop the sandbag out of the cart onto the ground. part a what effect does dropping the sandbag out of the cart at the equilibrium position have on the amplitude of your oscillation?
Dropping sandbags does not change cart speed. After the bag drops no energy leaves the system, so the cart always returns to the equilibrium point with the same kinetic energy and thus the same maximum velocity.
This means that the equilibrium position of the horizontal spring is independent of the mass attached to it. For example, if a spring is replaced with a rigid spring of the same natural length, the same considerations apply. That is, the equilibrium position does not change. The duration of the pendulum does not depend on the mass of the weight.
Changing the concentration of something in equilibrium does not change the equilibrium constant. The only thing that changes the equilibrium constant is a change in temperature. Changing the concentration of something in the mixture changes the position of the equilibrium.
Learn more about The equilibrium position here:-https://brainly.com/question/517289
#SPJ4
1. on december 26, 2004, a great earthquake occurred off the coast of sumatra and triggered immense waves (tsunami) that killed some 200,000 people. satellites observing these waves from space measured 800 km from one wave crest to the next and a period between waves of 1 hour. what was the speed of these waves in m/s and in km/h? does your answer help you understand why the waves caused such devastation?
222.22 m/s is how fast these waves are moving. Relationship between wave speed, wavelength, frequency, and period.
How can I determine the wave speed?The equation wave speed = frequency x wavelength describes the relationship between wave speed, wavelength, frequency, and period.
Reason: A. Given that we are aware that the formula for calculating a wave's speed is:
v = f, where v is the wave's speed.
f = the wave's frequency
A wavelength is
Here, stands for the separation between adjacent wave crests.
f = 1/Time Period = (1/1 hr)(1 hr/3600 s) f = 2.77 x 104 s1 = 800 km = 8 x 105 m
Therefore,
v = (2.77 x 10⁻⁴ s⁻¹)(8 x 10⁵ m)
v = 222.22 m/s.
To learn more about Wave speed refer to:
https://brainly.com/question/3148541
#SPJ4
the base of an aluminum block, which is fixed in place, measures 90 x 90 cm. the height of the block is 60cm. a force, applied to the upper force and parallel to it, produces a shear strain of 0.0060. the shear modulus of aluminum is 3.0 x 10^10 pa. what is the displacement
The displacement of an aluminum block, which is fixed in place, measures 90 x 90 cm with a height of 60 cm is 0.36 cm
S = Shear ε / Shear γ
S = Shear Modulus
ε = Stress
γ = Strain
S = 3 * [tex]10^{10}[/tex] Pa
Shear γ = 0.006
Shear ε = S * Shear γ
Shear ε = 3 * [tex]10^{10}[/tex] * 0.006
Shear ε = 1.8 * [tex]10^{8}[/tex]
Shear ε = 180 MPa
Displacement = Shear ε * l
l = Length = 60 cm
Displacement = 0.006 * 60
Displacement = 0.36 cm
Therefore, the displacement of the upper phase aluminum block is 0.36 cm in the direction of applied force.
To know more about Shear Modulus
https://brainly.com/question/14070556
#SPJ4
a ball is shot from the ground straight up into the air with initial velocity of 41 ft/sec. assuming that the air resistance can be ignored, how high does it go?
A ball is shot from the ground straight up into the air with initial velocity of 41 ft/sec. It takes 1.28 sec to reach its its maximum height of 26.27feet.
a ball is shot straight up into the air with initial velocity of 41ft/sec
S = [tex]S_{0} +V_{t} - 16t^{2}[/tex]
height [tex]S_{0} = 0[/tex]
velocity [tex]V_{0}[/tex] = 41ft/sec
S= 0+41t- 16[tex]t^{2}[/tex]
S = 41t -16[tex]t^{2}[/tex]
instantaneous velocity v
V = ds/dt = [tex]V_{0}[/tex]- 32t
V = 41-32t
32t = 41
t = 41/32 = 1.28 sec.
S = 41t-16[tex]t^{2}[/tex]
= 41 ( 1.28)- 16 [tex](1.28)^{2}[/tex]
= 52.48 - 26.21
= 26.27
What is velocity?The pace at which an object's position changes in relation to a frame of reference and time is what is meant by velocity. Although it may appear sophisticated, velocity is just the act of moving quickly in one direction. Since it is a vector quantity, the definition of velocity requires both magnitude (speed) and direction. Its SI equivalent is the meter per second (ms-1). A body is considered to be accelerating if the magnitude or direction of its velocity changes.
To learn more about velocity, refer;
https://brainly.com/question/18084516
#SPJ4
consider a monochromatic electromagnetic plane wave propagating in the z direction. at a particular point in space, the magnitude of the electric field has an instantaneous value of 442 v/m in the positive x-direction. what is the instantaneous magnitude of the poynting vector at the same
The instantaneous magnitude of the poynting vector will be 518.48.
To calculated magnitude of the poynting vector, we require to use the formula of poynting vector
S = E*B/u
since B = E/c
so , S = E^2 /uc
where , E is the electric field and B is the magnetic field ,
S is the poynting vector magnitude and c is the speed of light.
Putting the values, we get
S = (442x442) /uc
S = 195364 / uc
uc = 4πx[tex]10^{-7}[/tex] x 3 x [tex]10^{8}[/tex]
uc = 376.8
Now, S = 195364/376.8
S = 518.48
Hence The instantaneous magnitude of the poynting is 518.48.
To know more about, poynting vector, visit here,
https://brainly.com/question/28215376
#SPJ4
the maximum speed of a 3.00-kg object in simple harmonic motion is 4.00 m/s. the maximum acceleration of the object is 5.00 m/s2. what is the period of simple harmonic motion?
The period of a 3.00kg object moving in a simple harmonic motion is 5.02s
Simple harmonic motion is a system where the object oscillates around the equilibrium position.
Based on the theorem, there are some formulas:
x(t) = A.cos t (ωt+∅)
x max = A
v max = Aω
a max = Aω²
ω = 2π/T = 2πf
From the question, we got some informations:
m = 3.00kg
v max = 4.00 m/s
a max = 5.00 m/s²
T = ?
We will use the formula for a max and v max to find the value of ω:
v max = Aω
v max = 4.00 m/s
Aω = 4.00 m/s ...(i)
a max = Aω²
5.00 = v max (ω)
5.00 = 4.00ω
ω = 1.25 rad/s ..(ii)
Next, we will use the Period formula:
ω = 2π/T
1.25 = 2π/T
T = 1.6π s
T = 5.02s
Learn more about The Simple Harmonic Motion here: https://brainly.com/question/28208332
#SPJ4
if the average speed of a helium atom at a certain temperature is 1110 m/s, what is the speed in miles per hour? (1 mi
Answer:
About 2483 miles per hour.
Explanation:
Check out the image.
Calculate the initial velocity of a ball thrown vertically into the air reaching a maximum
height of 20 m. (Don't forget: at maximum height the final velocity is zero and the
acceleration is -10 m/s²)
The initial velocity of the ball thrown vertically into the air reaching a maximum height is 20 m/s.
What is velocity?
Velocity can be defined as the ratio of displacement to time.
To calculate the initial velocity of the ball, we use the formula below.
Formula:
v² = u²+2gh............... Equation 1Where:
v = Final velocityu = Initial velocityg = Acceleration due to gravityh = HeightFrom the question,
Given:
v = 0 m/sg = -10 m/s²h = 20 mSubstitute these values into equation 1
0² = u²+[2×20×(-10)]-u² = -400u² = 400u = √400u = 20 m/sHence, the initial velocity of the ball is 20 m/s.
Learn more about velocity here: https://brainly.com/question/24739297
#SPJ1
can baseball bat kill? a baseball bat hits the ball with variable force. the ball weighs 0.145 kg and comes toward and (after hit) away from the batter both with 40 m/s, in opposite directions. find the maximum force fmax from the bat
The maximum force (Fmax) from the bat which hits the ball with a speed of 40 m/s of weight 0.145kg is 5.8 N.
What is force?A push or pull that an object experiences as a result of interacting with another item is known as a force. Every time two items interact, a force is exerted on each of the objects. The force is no longer felt by the two objects when the interaction ends. Only when there is interaction do forces actually exist.
Given,
mass of ball is 0.145 g.
speed of ball after being hit is 40 m/s.
maximum force =?
time taken to hit the ball be 1 s
By using the formula, F = ma
where,
F = force from the bat
m = mass of the ball
a = acceleration of the ball
But,
a = s/t
where,
s = speed of the ball being hit
t = time taken
F = ms/t
F = 0.145 x 40 / 1
F = 5.8
∴ force from bat is 5.8 N.
To know more about force, visit:
https://brainly.com/question/26115859
#SPJ4
suppose you photographed earth's dark side from space, using ultraviolet-sensitive film, and using infrared-sensitive film. what would you expect to see in the photo?
The infrared image would reveal radiation coming from all around Earth, whereas the ultraviolet image would only show artificial sources like lighting.
What purposes does infrared serve?There are numerous uses for infrared. Heat sensors, thermal imaging technology, and night vision gear are some of the most popular. Infrared light is used in both wired and wireless communications and networking operations.
To avoid Earth's atmosphere and obtain a clearer view of the planets, stars, and galaxies that we are studying, space telescopes are primarily launched into orbit. Only some light can enter our atmosphere because it acts as a barrier, blocking all other light.
To know more about photograph visit:
https://brainly.com/question/10656749
#SPJ4
(a) how many minutes does it take a photon to travel from the sun to the earth? (b) what is the energy in ev of a photon with a wavelength of 558 nm? (c) what is color of light with this wavelength? (d) what is wavelength of a photon with an energy of 1.00 ev? please show the solution.
To known about all the answers, we first known about the photon and wavelength concept.
What is a photon?
A tiny energy packet of electromagnetic radiation is called a photon, referred to as a light quantum. Albert Einstein proposed the existence of discrete energy packets during the transmission of light in his 1905 description of the photoelectric effect, which gave rise to the photon concept.
What is wavelength?
A waveform signal's wavelength is the separation between two identical points (adjacent crests) in adjacent cycles as the signal travels through space or along a wire. This length in wireless systems is typically specified in meters (m), centimeters (cm), or millimeters (mm).
a) Distance between the earth and the sun is
1.5*10^N
Speed of photon = 3*10^8m|s
Time= distance/speed
= 1.5*10^11m/3*10^8m|s
= 0.5*10^3 second
= 500 sec
= 8.3 minutes.
b) energy of the photon is given by
E=hc/⋋
h= planks constant – 4.14* 10^15 eVs
c= Speed of light- 3*10^8 m/s
⋋= 558 nm= 558* 10^9 m
E= 4.14* 10^15 eVs* 3*10^8 m/s /558* 10^9 m
E= 2.23 eV
c) Wavelength color
495–570 nm for green. 570–590 nm for yellow. Orange (590–620 nm). Red: 620-750 nm
d) Let the wavelength be ⋋
We know E=hc/⋋
1 eV= 4.14*10^-15 eVs* 3*10^8m/s/⋋
⋋ = 12.42*10^-7m
⋋ = 1242 nm.
Therefore, Distance between the earth and the sun is 8.3 minutes. Energy of the photon is given by 2.23 eV. Wavelength color is green or yellow. The wavelength be ⋋ is 1242 nm.
Learn more about Photon from the given link.
https://brainly.com/question/17227537
#SPJ4
after a day of testing race cars, you decide to take your own 1550-kg car onto the test track. while moving down the track at 10.0 m/s, you uniformly accelerate to 30.0 m/s in 10.0 m/s. what is the average net force that the track has applied to the car during the 10.0-s interval?
Average net force that the track has applied to the car during 10.0 sec is 3100 Newton.
In the given question we have,
mass of testing Car = 1550 kg
initial velocity of car on test track = 10.0 m/sec
final velocity of car on test track = 30.0 m/sec
Net force that track has applied to car (F) = m × a
where m ----> mass of car
a ----> acceleration
firstly, we shall find out the value of acceleration.
Using the relation formula between initial velocity, final velocity and acceleration
v - u = at
where, v---> final velocity
u---> initial velocity
a---> acceleration
t-----> time
given , v = 30m/sec , u= 10m/sec , t = 10 sec
10× a = 30 - 10 = 20 => a = 2m/sec²
So, Net force = mass × acceleration
F = 1550×2 = 3100 Newton
Hence, the net force applied on car during 10.0 sec interval is 3100 Newton.
To learn more about Net force, refer:
https://brainly.com/question/14617736
#SPJ4
a hydraulic lift used at an automotive repair shop raises a looo-kilogram car two meters off of the ground. what is the potential energy given to the car? * 1 point a) 1000 j b) 2000 j c) 10,000 j d)20,000 j
The potential energy provided to the car is 19600 joules, or around 20,000 j, when a 1000-kg car is raised two meter's off the ground using a hydraulic lift at an auto repair shop.
The energy that an item retains due to its position in hydraulic lift to other objects, hydraulic lift tensions, electric charge, or other Gravitational potential reasons is known as potential energy in physics. produces gravitational potential energy
GPE=mgh
where;
m equals the object's mass
g stands for the object's gravitational acceleration.
The height has increased by h in metres.
As The result is:
GPE = 1000kg*9.8m/s*2m
=19600kg m2/s2
=19600J
Learn more about potential energy here
https://brainly.com/question/24284560
#SPJ4
What is the disadvantage of the circuit pictured below
A._ The addition of more light bulbs decreases the flow of electricity through the circuit.
B._ The addition of more light bulbs decreases the voltage to each bulb.
C._ The addition of more light bulbs decreases the resistance in the circuit.
D._ The circuit only works when alternating current is used.
The circuit shown has the drawback that it can only operate with alternating current.
The correct answer is D
What exactly do you mean by "alternating current"?A type of electrical current known as alternating current (AC) alternates the flow of electrons periodically or in cycles between two directions. Alternating current (AC) is the kind of current that circulates through electrical outlets used in everyday homes and power lines.
How do AC & DC current differ from one another?Both alternating current (AC) and direct current (DC) are types of electric current (DC). The way that electrons move determines how AC and DC are different from one another. While the flow of electrons in AC is constantly changing, moving first ahead and then backward, as opposed to DC's steady movement in one direction
To know more about alternating current visit:
https://brainly.com/question/11673552
#SPJ13
suppose a 0.45-kg mass on a spring-loaded gun that has been compressed 0.10 m has elastic potential energy of 1.50 j. how high above the spring's equilibrium point can the gun fire the mass if the gun is fired straight up?
Height above which the spring's equilibrium point can the gun fire the mass if the gun is fired straight up is 0.34m.
What is law of conservation of energy?The law of conservation of energy is that energy can neither be created nor destroyed. Energy changes from one form of to another form.
Using the law of conservation of energy.
Em₀ = 1.5 J
Higher.
Em1 = U
= m g h
As there is no friction, then the mechanical energy is conserved
Hence, Em₀ = Em1
Em₀ = m g h
therefore, h = Em₀ / m g
h = 1.5 / 0.45 * 9.8
Hence, h = 0.34 m
To know more about law of conservation of energy, refer
https://brainly.com/question/166559
#SPJ4
why are measurements of the current density of the universe important? the overall density of the universe is the main clue that can allow us to choose between open, closed, and flat models of the universe. the overall density of the universe is the main clue that can allow us to tell where the center of the universe is. the overall density of the universe is the main clue that can allow us to tell whether the universe is isotropic or homogeneous. the overall density of the universe is the main clue that can allow us to tell how quickly the universe is collapsing. need help?
The primary indicator that can help us distinguish between open, closed, and flat universe models is the universe's overall density.
What is meant by current density?Current density, which is measured in amperes per square meter, is the quantity of electric current flowing through a unit of cross-sectional area. The current density will increase as the conductor's current increases.The total amount of current flowing through one unit of a cross-sectional area is referred to as current density. If the current flow is uniform, it will flow through a particular conductor with the same amount at all of its points, regardless of how the conductor's area changes.The measurements of the current density of the universe important to the primary indicator that can help us distinguish between open, closed, and flat universe models is the universe's overall density.To learn more about current density refer to:
https://brainly.com/question/24704849
#SPJ4
A girl riding a bicycle at 2.0 m/s throws a tennis ball horizontally forward at a speed of 1.0 m/s from a height of 1.5 m. At the same moment, a boy standing on the sidewalk drops a tennis ball straight down from a height of 1.5 m.
What is the initial speed of the girl's ball relative to the boy?
WILL GIVE BRAINLIEST
The initial speed of the girl's ball relative to the boy is 3 m/s.
What is the initial speed of the girl's ball?
The initial speed of the girl's ball relative to the boy depends on the time of motion of the girls ball.
The time of motion of the ball from the given height is calculated as follows;
h = vt + ¹/₂gt²
where
v is the initial velocity of the ballt is the time of motion of the ballg is acceleration due to gravityh = 0 + ¹/₂gt²
h = ¹/₂gt²
t = √(2h/g)
t = √(2 x 1.5 / 9.8)
t = 0.55 s
The final velocity of the ball is calculated as;
v = gt
v = 9.8 x 0.55
v = 5.39 m/s
However, since we are looking for the initial speed of the girl's ball relative to the boy, we will ignore the final velocity of the ball.
The initial velocity of the ball = 0
The initial velocity of the girl's ball = 2 m/s + 1 m/s = 3 m/s
The relative velocity = 3 m/s - 0 m/s = 3 m/s
Learn more about relative velocity here: https://brainly.com/question/17228388
#SPJ1
A person shakes a sealed, insulated bottle containing coffee for a few minutes. What is the change in the temperature of the coffee?.
A person shakes a sealed, insulated bottle containing coffee for a few minutes, then the change in the temperature of the coffee increases slightly.
What happens when insulated bottle with coffee is shaken?The temperature of the coffee increases when insulated bottle is sealed and shaken because the exchange of heat from the surrounding from the thermos bottle is zero. From the first law of thermodynamics, the work done on system is equal to the change in internal energy.
As thermos flask is insulated, therefore no heat energy is added to the system,
Therefore, △Q=0
Work is done by shaking it against viscous force.
Now, △w=−ve
Internal energy , △U=△Q−△w=0−(−△w)
△U=+△w
So, △U=+ve
Hence, temperature of the system increases due to the increase in internal energy.
To know more about law of thermodynamics, refer
https://brainly.com/question/26035962
#SPJ4
Question 3 of 5
The image shows a school of fish being located using sonar.
Which two measures are needed to calculate the distance between the fish
and the ship?
A. The number of sound waves emitted from the ship
B. The speed of sound waves
C. The amount of time it takes sound waves to travel to the fish and
back
D. The size of the ship
Answer:
Explanation:
b
Answer: The correct answers are B and C. :)
Explanation:
5. The acceleration of gravity at Hartford, Connecticut, is 9. 80336 m/s².
What is the gravitational force acting on a. 25000 kg mass at this
location?
The gravitational force acting on 25000 kg mass at a given location is 2.45 × 10⁵ N.
What is gravity?Gravity can be described as an attractive force on a body towards the center of the earth. Every object having mass applies some force or gravitational pull on another object having mass. Gravity is responsible for the planets in orbit around the sun.
Given, the mass of the object, m = 25000 Kg
The acceleration of gravity at Hartford, Connecticut, g =9.80336 m/s²
The gravitational force acting on the given mass at this location is given by:
F = mg
F = 25000 Kg × 9.80336 m/s²
F = 245084 N
F = 2.45 × 10⁵ N
Learn more about gravity, here:
brainly.com/question/1479537
#SPJ1
an object with mass 3.1 kg is executing simple harmonic motion, attached to a spring with spring constant 260 n/m . when the object is 0.019 m from its equilibrium position, it is moving with a speed of 0.65 m/s . part a calculate the amplitude of the motion. express your answer to two significant figures and include the appropriate units.
The amplitude of the motion is A = 7.3*10⁻²m and the maximum speed attained by the object Vmax=0.66 m/s
speed v= 0.65 m/s
Angular speed is ω,
ω = √k/m=√260/3.1=9.15 s⁻¹
Amplitude = A is
A = √x²+v²/ω²
=√0.019²+0.65²/9.15²=0.073m
A=7.3*10⁻²m
Vmax=ωA=9.15*0.073
Vmax=0.66 m/s
The distance in amplitude between the wave's resting position and its highest movement. quantity of waves travelling by a particular point each second. The length of time it takes for one wave cycle to end. We experience loudness or volume as a function of the relative strength of the sound waves (transmitted vibrations).Amplitude is a tool for studying data on user behavior. It helps the growth, product, and marketing teams make decisions by drawing conclusions about user behavior from data. Understanding user behavior better can assist a business in developing fresh approaches to increase user engagement, customer loyalty, and income.
Learn more about amplitude here:
https://brainly.com/question/9525052
#SPJ4
3) A block with an unknown mass rests on a rough table. Attached to the mass is a
string which is attached to a 12 kg mass that hangs over the edge of the table via a
pulley. The coefficient of friction is 0.35. When released from rest, the system
reaches a speed of 8 m/s after traveling a distance of 6 m.
a. Calculate the acceleration of the system.
b. What equation can you use to represent the force of friction acting on the
unknown mass.
c. Write out Newton's Second Law and solve for the unknown mass.
a. The acceleration of the system is 0.21 m/s^{2}
b. The equation of the force of friction is -
tension force - force of friction = unknown mass x its acceleration and force of friction is equal to product of coefficient of friction and normal force acting on unknown mass .
c. Newton's second law of motion applies when there are unbalanced forces acting on an object. According to the second law, the mass and the net force acting on the object both affect how quickly an object is accelerating . An object's acceleration is directly proportional to the net force applied and inversely proportional to the object's mass. An object's acceleration increases as the amount of force exerted on it does. A decreasing acceleration is caused by an increase in an object's mass.
The unknown mass is nearly equal to 30 kg .
What is acceleration ?
the rate at which the speed and direction of a moving object vary over time is termed as acceleration . An object going straight ahead when it accelerates or decelerates, is said accelerated. Even if the speed is constant, motion on a circle accelerates because the direction is always shifting. Both effects contribute to the acceleration for all other motions.
To know more about acceleration, click the given link ;
https://brainly.com/question/460763
#SPJ13
100 POINTS!! 1. Calculate the current flowing when:
(A) 75 mC pass a point in I min;
(B) 0.5 GC pass a point in 2 hours;
(C) 2.0 MC pass a point in 1000 hours.
2. Calculate the charge flow when the current flow is:
(A) 6.0 A for 5 min;
(B) 250 mA for 4 hours;
(C) 2.5 KA for 50 s.
3. How long does it take for the following to pass a point in the circuit?
(A) 25 MC at a current of 25 mA;
(B) 48 C at a current of 12 A;
(C) 360 C at a current of 4.0 A.
4. A current of 10 cA flows through a resistor of resistance 4.0 ohms
Find the:
(a) P.d across the resistor;
(b) Total charge flow in 3 minutes;
Current ( I ) = charge(Q) * time(t)
(A) I = 75/1000 * 1*60 = 4.5A
(B) I = 0.5*10^9 * 2*60*60 = 3.6*10^12 A
(C) I = 2*10^-6*1000*60*60 =0.55 A
2) Q = I/t
( A) Q = 6/5*60 = 0.02 C
( B) Q = 250*1000/ 4*60*60 = 17.36 C
( C) Q = 2.5/1000*50 = 5*10^-5 C
3 ) t = I/C
(A) t =25*1000/ 25*10^-6 = 1*10^9 s
(B) t = 12/48 = 0.25 s
(C) t = 4/360 = 0.011 s
4 )
( A) P . d = current * resistance = 10/100 * 4= 0.4V
( B) charge = 10*10^-2/3*60 = 5.55*10^-4 C
What is charge ?
Charge, also known as electric charge, electrical charge, or electrostatic charge and denoted by the symbol q, is a property of a unit of matter that indicates how many more or fewer electrons than protons it contains.
The physical characteristic of matter that causes it to feel a force when exposed to an electromagnetic field is called electric charge. The two types of electric charges that protons and electrons most frequently carry are positive and negative charges.
To know about charge from the link
https://brainly.com/question/18102056
#SPJ1
If a 50 N force is applied to a lever and the lever is then able to lift a 150 N object, what is the mechanical advantage of the lever?
Answer:
3
Explanation:
m.a=load÷effort
thus 150N÷50N=3
a mass of 10 kg is pushed up against a spring with a spring constant of 5 n/m. the mass compresses the spring by 8 m, and then it is released. how fast is the mass going once it leaves the spring?
According to the given statement 160 J fast is the mass going once it leaves the spring.
What is the means of mass?In science, mass is a quantitative measurement of inertia, a basic characteristic of all matter. It essentially refers to a body containing matter in the universe resistance to changing its speed or location in response to the force applied. The change caused by a force applied is smaller the more mass a body has.
Briefing:Mass m = 10kg
Spring constant k = 5n/m
Constant Spring Compression in the mass x = 8m
The elastic potential energy of the spring is transformed into the kinetic energy of the mass when the mass exits the spring.
1/2 kx2 = 1/2 mv2
1/2 . 5 . (8)2 = 1/2 . mv2
1/2 mv2 = 160 J
The kinetic energy of the mass is 160 J.
To know more about Mass visit:
https://brainly.com/question/4072152
#SPJ4
heat generated by cars, factories, furnaces, lights, air conditioners, and heat-absorbing dark roofs and streets help create what is known as a(n) in the central city.
The heat generated by cars, factories, furnaces, lights, air conditioners, and heat-absorbing dark roofs and streets helps create an urban heat island in the central city.
An urban heat island arises while cities update the herbal land cowl with dense concentrations of pavement, homes, and other surfaces that soak up and keep the warmth. This effect increases power costs (e.g., for aircon), air pollutants stages, and warmth-related illness and mortality.
Heat islands form as plants are replaced by asphalt and urban for roads, homes, and other systems necessary to deal with growing populations. those surfaces soak up—rather than replicate—the sun's warmth, causing floor temperatures and basic ambient temperatures to rise.
An urban heat island happens when a city experiences much warmer temperatures than close rural areas. The difference in temperature between urban and less-evolved rural regions has to do with how properly the surfaces in each surrounding absorb and keep warm.
Learn more about an urban heat island here:-https://brainly.com/question/3226982
#SPJ4