Answer:
5.465 × 10^10 revolutions
Explanation:
Formula for Magnetic Field = m. v/ q . r
M = mass of electron = mass of positron = 9.11 x 10^-31 kg,
radius of the positron = 5.03 mm
We convert to meters.
1000mm = 1m
5.03mm = xm
Cross multiply
x = 5.03/1000mm
x = 0.00503m
q = Electric charge = -1.6 x 10^-19 C
Magnetic field (B) = 0.85 T
Speed of the positron is unknown
0.85 = 9.11 x 10^-31 kg × v/ -1.6 x 10^-19 C × 0.00503
0.85 × 1.6 x 10^-19 C × 0.00503 = 9.11 x 10^-31 kg × v
v = 0.85 × -1.6 x 10^-19 C × 0.00503/9.11 x 10^-31 kg
v = 6.8408 ×10-22/ 9.11 x 10^-31 kg
v = 750911086.72m/s
Formula for complete revolutions =
Speed × time / Circumference
Time = 2.30s
Circumference of the circular path = 2πr
r =0.00503
Circumference = 2 × π × 0.00503
= 0.0316044221
Revolution = 750911086.72 × 2.30/0.0316044221
= 1727095499.5/0.0316044221
= 546541562294 revolutions
Approximately = 5.465 × 10^10 revolutions
g Can a rigid body experience any ACCELERATION when the resultant force acting on that rigid body is zero? Explain.Can a rigid body experience any ACCELERATION when the resultant force acting on that rigid body is zero? Explain.
Answer:
No, a rigid body cannot experience any acceleration when the resultant force acting on the body is zero.
Explanation:
If the net force on a body is zero, then it means that all the forces acting on the body are balanced and cancel out one another. This sate of equilibrium can be static equilibrium (like that of a rigid body), or dynamic equilibrium (that of a car moving with constant velocity)
For a body under this type of equilibrium,
ΣF = 0 ...1
where ΣF is the resultant force (total effective force due to all the forces acting on the body)
For a body to accelerate, there must be a force acting on it. The acceleration of a body is proportional to the force applied, for a constant mass of the body. The relationship between the net force and mass is given as
ΣF = ma ...2
where m is the mass of the body
a is the acceleration of the body
Substituting equation 2 into equation 1, we have
0 = ma
therefore,
a = 0
this means that if the resultant force acting on a rigid body is zero, then there won't be any force available to produce acceleration on the body.
what is the value of x if x-36=5?
Answer:
Therefore, the value of x is 41
Explanation:
x=5+36
x=41
PLEASE HELP WILL GIVE BRAINLIEST In an experiment, the hypothesis is that if leaf color is related to temperature, then exposing the plant to low temperatures will result in a leaf color change . This hypothesis is _____. 1. testable 2.falsifiable 3.a and b above 4.none of the above
Answer:
testable
Explanation:
high heat can cause browning and or welting
Answer:
A
Explanation:
If it is tested, it will really changed when the plant into low temperature
How many different ingredients will you need…
Answer:
11
Explanation:
hope this helps!!!!!
Two separate disks are connected by a belt traveling at 5m/s. Disk 1 has a mass of 10kg and radius of 35cm. Disk 2 has a mass of 3kg and radius of 7cm.
a. What is the angular velocity of disk 1?
b. What is the angular velocity of disk 2?
c. What is the moment of inertia for the two disk system?
Explanation:
Given that,
Linear speed of both disks is 5 m/s
Mass of disk 1 is 10 kg
Radius of disk 1 is 35 cm or 0.35 m
Mass of disk 2 is 3 kg
Radius of disk 2 is 7 cm or 0.07 m
(a) The angular velocity of disk 1 is :
[tex]v=r_1\omega_1\\\\\omega_1=\dfrac{v}{r_1}\\\\\omega_1=\dfrac{5}{0.35}\\\\\omega_1=14.28\ rad/s[/tex]
(b) The angular velocity of disk 2 is :
[tex]v=r_2\omega_2\\\\\omega_2=\dfrac{v}{r_2}\\\\\omega_2=\dfrac{5}{0.07}\\\\\omega_2=71.42\ rad/s[/tex]
(c) The moment of inertia for the two disk system is given by :
[tex]I=I_1+I_2\\\\I=\dfrac{1}{2}m_1r_1^2+\dfrac{1}{2}m_2r_2^2\\\\I=\dfrac{1}{2}(m_1r_1^2+m_2r_2^2)\\\\I=\dfrac{1}{2}\times (10\times (0.35)^2+3\times (0.07)^2)\\\\I=0.619\ kg-m^2[/tex]
Hence, this is the required solution.
A single slit is illuminated by light of wavelengths λa and λb, chosen so that the first diffraction minimum of the λa component coincides with the second minimum of the λb component. (a) If λb = 350 nm, what is λa? For what order number mb (if any) does a minimum of the λb component coincide with the minimum of the λa component in the order number
Answer:
λ_A = 700 nm , m_B = m_a 2
Explanation:
The expression that describes the diffraction phenomenon is
a sin θ = m λ
where a is the width of the slit, lam the wavelength and m an integer that writes the order of diffraction
a) They tell us that now lal_ A m = 1
a sin θ = λ_A
coincidentally_be m = 2
a sin θ = m λ_b
as the two match we can match
λ _A = 2 λ _B
λ_A = 2 350 nm
λ_A = 700 nm
b)
For lam_B
a sin λ_A = m_B λ_B
For lam_A
a sin θ_A = m_ λ_ A
to match they must have the same angle, so we can equal
m_B λ_B = m_A λ_A
m_B = m_A λ_A / λ_B
m_b = m_a 700/350
m_B = m_a 2
An astronomer is measuring the electromagnetic radiation emitted by two stars, both of which are assumed to be perfect blackbody emitters. For each star she makes a plot of the radiation intensity per unit wavelength as a function of wavelength. She notices that the curve for star A has a maximum that occurs at a shorter wavelength than does the curve for star B. What can she conclude about the surface temperatures of the two stars
Answer:
Star A has a higher surface temperature than star B.
Explanation:
The effective temperature of a star can be determined by means of its spectrum and Wien's displacement law:
[tex]T = \frac{2.898x10^{-3} m. K}{\lambda max}[/tex] (1)
Where T is the effective temperature of the star and [tex]\lambda_{max}[/tex] is the maximum peak of emission.
A body that is hot enough emits light as a consequence of its temperature. For example, if an iron bar is put in contact with fire, it will start to change colors as the temperature increase, until it gets to a blue color, that scenario is known as Wien's displacement law. Which establishes that the peak of emission for the spectrum will be displaced to shorter wavelengths as the temperature increase and higher wavelengths as the temperature decreases.
Therefore, star A has a higher surface temperature than star B, as it is shown in equation 1 since T and [tex]\lambda max[/tex] are inversely proportional.
Question 18(Multiple Choice Worth 2 polnis)
When riding your skateboard you crash into a curb, the skateboard stops, and you continue moving forward. Which law of
motion is being described in this scenario?
O Law of Universal Gravitation
o Newton's Second Law of Motion
o Law of Conservation of Energy
o Newton's First Law of Motion
A belt is run over two drums. The larger drum has weight 4 lbs and a radius of gyration of 1.25 inches while the smaller drum has weight 2.7 lbs and a radius of gyration of 0.75 inches. The tension from the smaller drum is held constant at 6 lbs. If it is known that the speed of the belt is 11 ft/s after 0.16 s, what is the tension between the drums?
Answer:
269 lb
Explanation:
We first find the tangential acceleration, a on the drums
a = Δv/Δt since the speed of the belt is 11 ft/s after 0.16 s, Δv = 11 ft/s and Δt = 0.16 s
a = Δv/Δt = 11 ft/s ÷ 0.16 s = 68.75 ft/s²
Since torque τ = Tk = Iα where I = moment of inertia of larger drum = Mk² where m = mass of larger drum = 4 lbs, k = radius of gyration of larger drum = 1.25 inches, T = tension due to larger drum and α = angular acceleration of larger drum.
So, T = Iα/k = Mk²α/k = Mαk = Ma (since a = αk )
T = 4 lbs × 68.75 ft/s² = 275 lb
The tension due to the smaller drum is T' = 6 lb .
So the net tension in the belt is T'' = T - T' = 275 lb - 6 lb = 269 lb
Find an analytic expression for p(V)p(V)p(V), the pressure as a function of volume, during the adiabatic expansion.
Answer:
In an adiabatic process we have
pV γ = const..
This explains that the pressure is a function of volume, p ( V ) ,
So can be written as:
p ( V ) × V γ = p 0 V γ 0 ,
or p ( V ) = p 0 V 0 / V γ
= p 0 V 0 / V ^(7 / 5)
Differences between LED and CFL bulb..
Explanation:
CFL bulbs were made to take the place of incandescent bulbs, which generate light as a result of heat. ... LED (light-emitting diode) is a type of bulb that produces light using a narrow band of wavelengths. LED lighting is more energy efficient than CFL bulb.
When a magnet moves above a conducting ladder, the currents induced in the ladder produces a magnetic field. This field interacts with the magnetic field of the magnet to produce a force that A) pulls the ladder in the direction opposite to the direction of the moving magnet. B) pulls the ladder in the same direction as the moving magnet. C) brakes the ladder. D) None of the above.
Answer:
) pulls the ladder in the direction opposite
Explanation:
This is in line with lenz law that states that the magnetic field induced in a conductor act to oppose the magnetic field that produced it
Choose only one correct option. Explanation needed.
Answer:
[tex]\large \boxed{\mathrm{C. \ \ \frac{500}{7 \times 15 \times 8} \ g/cm^3 }}[/tex]
Explanation:
[tex]\displaystyle \sf Density = \frac{mass}{volume}[/tex]
[tex]\displaystyle \rho = \frac{m}{V}[/tex]
[tex]\sf mass=500 \ g[/tex]
[tex]\sf volume \ of \ a \ cuboid=width \times length \times height=( 7 \times 15 \times 8) \ cm^3[/tex]
[tex]\displaystyle \rho = \frac{500}{7 \times 15 \times 8}[/tex]
Which of the following scientists won a Nobel Prize for pioneering work in the
study of the evolution of stars?
A. Christian Doppler
B. Warren Washington
C. Charles Kuen Kao
-D. Subrahmanyan Chandrasekhar
Answer:
Subrahmanyan Chandrasekhar
Answer:
D. Subrahmanyan Chandrasekhar
Explanation:
A circular loop of wire of area 25 cm2 lies in the plane of the paper. A decreasing magnetic field B is coming out of the paper. What is the direction of the induced current in the loop?
Answer:
counterclockwise
Explanation:
given data
area = 25 cm²
solution
We know that a changing magnetic field induces the current and induced emf is express as
[tex]\epsilon = -N \frac{d \phi }{dt}[/tex] ..................................1
and we will get here direction of the induced current in the loop that is express by the Lens law that state that the direction of induces current is such that the magnetic flux due to the induced current opposes the change in magnetic flux due to the change in magnetic field
so when magnetic field decrease and point coming out of the paper.
so induced current in the loop will be counterclockwise
A father and his son want to play on a seesaw. Where on the seesaw should each of them sit to balance the torque?
Answer:
A The father should sit closer to the pivot.
C The longer wrench makes the job easier because less force is needed when there is more distance from the pivot.
A As far from the head of the hammer as possible because this will maximize torque.
D at the opposite side of the seesaw towards the middle
:) gl
Explanation:
If a father and his son want to play on a seesaw then to balance the torque of the seesaw the father should sit near the pivot as he had more weight as compared to his son, while the son should sit a little farther from the pivot point as compared to his father.
What is the mechanical advantage?
Mechanical advantage is defined as a measure of the ratio of output force to input force in a system, It is used to analyze the forces in simple machines like levers and pulleys.
Mechanical advantage = output force(load) /input force (effort)
As given in the problem statement If a father and his son wish to play on a seesaw,
The father should sit close to the pivot because he weighs more than his son, and the son should sit a little farther away from the pivot point than his father. This will help balance the torque of the seesaw.
Thus, the father should sit near the pivot on the one side and the son should sit a little farther from the pivot of a seesaw on the other side.
Learn more about Mechanical advantages, here
brainly.com/question/16617083
#SPJ2
A body is thrown vertically upwards with a speed of 95m / s and after 7s it reaches its maximum height. How fast does it reach its maximum height? What was the maximum height reached?
Explanation:
u = 95 m/sec ( Initial speed)
t = 7 sec ( Time of ascent)
According to Equations of Motion :
[tex]s = ut - \frac{1}{2} g {t}^{2} [/tex]
Max. Height = 95 * 7 - 4.9 * 49 = 424. 9 = 425 m
Answer:
332.5 m
Explanation:
At the maximum height, the velocity is 0.
Given:
v₀ = 95 m/s
v = 0 m/s
t = 7 s
Find: Δy
Δy = ½ (v + v₀) t
Δy = ½ (0 m/s + 95 m/s) (7 s)
Δy = 332.5 m
If two firecrackers produce a sound level of 81 dBdB when fired simultaneously at a certain place, what will be the sound level if only one is exploded?
Answer:
77.96dB
Explanation:
Recall that decibels are a unit of measuring intensity of sound, and depend on the logarithm of the intensity
the intensity, measured in decibels is given by:
I(db)=10log(I/I0)
I is the intensity in MKS units; I0 is the threshold intensity for human hearing (10^-12 W/m^2)
Thus, if the two sounds together have a dB of 81, we know:
81=10log(I/I0)
using the data above, we can find the intensity of the two sounds to be
0.000125 W/m^2
therefore, one firecracker has an intensity half of that, or 0.0000625W/m^2
now use this value to find the dB of one firecracker:
I(dB0=10log(0.0000625/10^-12)=77.96dB
A damped oscillator is released from rest with an initial displacement of 10.00 cm. At the end of the first complete oscillation, the displacement reaches 9.05 cm. When 4 more oscillations are completed, what is the displacement reached
Answer:
The displacement is [tex]A_r = 6.071 \ cm[/tex]
Explanation:
From the question we are told that
The initial displacement is [tex]A_o = 10 \ cm[/tex]
The displacement at the end of first oscillation is [tex]A_d = 9.05 \ cm[/tex]
Generally the damping constant of this damped oscillator is mathematically represented as
[tex]\eta = \frac{A_d}{A_o}[/tex]
substituting values
[tex]\eta = \frac{9.05}{10}[/tex]
[tex]\eta = 0.905[/tex]
The displacement after 4 more oscillation is mathematically represented as
[tex]A_r = \eta^4 * A_d[/tex]
substituting values
[tex]A_r = (0.905)^4 * (9.05)[/tex]
[tex]A_r = 6.071 \ cm[/tex]
Answer:
Displacement reached is 6.0708 cm
Explanation:
Formula for damping Constant "C"
[tex]C^n=\frac{A_2}{A_1}[/tex] where n=1,2,3,........n
Where:
[tex]A_2[/tex] is the displacement after first oscillation
[tex]A_1\\[/tex] is the initial Displacement
[tex]A_1=10\ cm\\A_2=9.05\ cm\\[/tex]
In our case, n=1.
[tex]C=\frac{9.05}{10}\\C=0.905[/tex]
After 4 more oscillation, n=4:
[tex]C^4=\frac{A_6}{A_2}[/tex]
Where:
[tex]A_6[/tex] is the final Displacement after 4 more oscillations.
[tex]A_6=(0.905)^4*(9.05)\\A_6=6.0708\ cm[/tex]
Displacement reached is 6.0708 cm
A 750 gram grinding wheel 25.0 cm in diameter is in the shape of a uniform solid disk. (we can ignore the small hole at the center). when it is in use, it turns at a consant 220 rpm about an axle perpendicular to its face through its center. When the power switch is turned off, you observe that the wheel stops in 45.0 s with constant angular acceleration due to friction at the axle. What torque does friction exert while this wheel is slowing down?
Answer:
Torque = 0.012 N.m
Explanation:
We are given;
Mass of wheel;m = 750 g = 0.75 kg
Radius of wheel;r = 25 cm = 0.25 m
Final angular velocity; ω_f = 0
Initial angular velocity; ω_i = 220 rpm
Time taken;t = 45 seconds
Converting 220 rpm to rad/s we have;
220 × 2π/60 = 22π/3 rad/s
Equation of rotational motion is;
ω_f = ω_i + αt
Where α is angular acceleration
Making α the subject, we have;
α = (ω_f - ω_i)/t
α = (0 - 22π/3)/45
α = -0.512 rad/s²
The formula for the Moment of inertia is given as;
I = ½mr²
I = (1/2) × 0.75 × 0.25²
I = 0.0234375 kg.m²
Formula for torque is;
Torque = Iα
For α, we will take the absolute value as the negative sign denotes decrease in acceleration.
Thus;
Torque = 0.0234375 × 0.512
Torque = 0.012 N.m
Based on The MOHS hardness Scale, which mineral could be scratched by a penny but not by a fingernail
A. Fluorite
B. Calcite
C. Gypsum
D. Talc
The correct answer is B. Calcite
Explanation:
Mohs hardness scale indicates the hardness of minerals using a scale from 1 to 10 as well as defining the objects or tools that can be used to scratch the minerals. These two features of minerals are shown in the table of the image. About this, it is shown gypsum and talc can be scratched by just a fingernail, considering minerals with a hardness of 2.5 or below can be scratched by a fingernail. In the case of calcite that has a hardness of 3, this cannot be scratched by a fingernail, but it can be scratched by a penny, which works for minerals with a hardness of 3.5 or below. Thus, the correct answer is Calcite.
Matter's resistance to a change in motion is called _____ and is directly proportional to the mass of an object
Answer:
Matter's resistance to a change in motion is called INERTIA and is directly proportional to the mass of an object.
Explanation:
Which of the following measures is equal to 700 km?
Answer:
1km=1000m
700km=
700×1000=700000
=700000metres
hope this helps
A 120-V rms voltage at 60.0 Hz is applied across an inductor, a capacitor, and a resistor in series. If the peak current in this circuit is 0.8484 A, what is the impedance of this circuit?
A) 200 Ω
B) 141 Ω
C) 20.4 Ω
D) 120 Ω
E) 100 Ω
Answer:A 200
Explanation:
Vp=1.41*Vrms
Vp=169.7 v
Z=Vp/Ip
Z=169.7/.8484
Z=200.03 ohm
Consider a hydraulic lift that uses an input piston with an area of 0.5m2. An input force of 15N is exerted on this piston. If the output piston has an area of 3.5m? What is the output force?
Answer:
The output force of the piston is 105 N.
Explanation:
Given;
the area of the input piston, A₁ = 0.5 m²
the input force of the piston, F₁ = 15 N
the area of the output piston, A₀ = 3.5 m²
the output force of the piston, F₀ = ?
The pressure of the hydraulic lift is given by;
[tex]P = \frac{F}{A}[/tex]
where;
P is the hydraulic pressure
F is the piston force
A is the area of the piston
[tex]P = \frac{F}{A} \\\\\frac{F_o}{A_o} = \frac{F_i}{A_i} \\\\F_o = \frac{F_iA_o}{A_i} \\\\F_o = \frac{15*3.5}{0.5} \\\\F_o = 105 \ N[/tex]
Therefore, the output force of the piston is 105 N.
A loud sound is produced in the downtown section of a city. Which of the following is least likely to occur with the sound waves?
A. The sound wave will reflect off Buildings and automobiles.
B. The air will transmit the sound in longitudinal waves of energy.
C. All those sound waves will be absorbed by the surroundings.
D. The sound will bend spread between buildings by the fraction.
Answer:
A. The sound wave will reflect off Buildings and automobiles.
Explanation:
This is because the sound waves would more likely propagate through diffraction through buildings and transmission through the air. It is also more likely to be absorbed by buildings than for multiple reflections to occur off buildings and automobiles. In the process of reflection, these materials would absorb the sound energy thereby reducing its ability to reflect.
write any two physical hazard occuring in the late choldhood
Answer:
Hazards during late childhood
Health Problems: Chronic health ailments like T.B., Pneumonia etc will hinder the child's motor abilities.Accidents: School age children are more adventurous in nature, they run fast, play hard, ride bicycles and scooters and engage in a variety of sports.Calculate the magnetic field and its direction at point P, which is 2.0 cm away from the top wire and 4.0 cm from the bottom wire. Assume both wires are infinitely long and each carries a current of 1.5 A.
Answer:
Explanation : B = μ₀i / 2πr
B1 = (2×10^-7) × 1.5/0.02
= 15 μT
B2 = (2×10^-7 ) × 1.5/0.04
= 7.5 μT
total field = 15 μT + 7.5 μT
= 22.5 μT
What is the separation in meters between two slits for which 594 nm orange light has its first maximum at an angle of 32.8°?
Answer:
1.1micro meter
Explanation:
Given that
Constructive interference is
ma = alpha x sin theta
Alpha = 1 x 594 x10^ -9/ sin 32.8°
= 1.1 x 10^ -6m
Explanation:
Dharna is said to be concentration it is true or false
dharna is said to be concentration.. it is true